Electric storage water heater Jaspi. Water heaters from the Finnish company JASPI VLM

Storage water heater

A storage electric water heater is a tank (connected to the water supply and the power supply) in which water is heated. In the tank storage water heater a heating element is installed, as well as a protective magnesium anode, which prevents corrosion and scale. The best are stainless steel tanks. The storage water heater provides gradual heating of water, which does not require large electrical costs. Storage water heater power… read in full >

Water heaters

Water heaters are household appliances for heating water, which differ in heating methods and power. In the modern market, water heaters are presented wide range techniques of various types: geysers, electric water heaters, and a variety of boilers. Based on the type of fuel consumed, water heaters are divided into electric and gas water heaters. Electric water heaters, in turn, are divided according to the heating method - into storage and instantaneous...

JASPI – water heaters

Manufactured in Finland with over 30 years of experience, Jäspi electric water heaters are the right choice for the user. Wide model range(15 – 2000 l), as well as the ability to operate water heaters in difficult water quality conditions, allow you to choose the right model in each specific case. High-quality, ferritic, stainless and acid-resistant steel of the tank is designed specifically for the production of water heaters.

TABLE OF DHW PRODUCTION OF JÄSPI WATER HEATERS

Model	Temperature conditions, °C	Output, l	Time, min.
VLK-100 3 kW vertical model	10 / 45 / 85	210	18
VLK-100 3 kW horizontal model	10 / 45 / 85	180	14
VLM-300S	10 / 45 / 85	650	55
VLM-500S	10 / 45 / 85	1100	90
VLS-220S	10 / 45 / 85	430	37

(temperature conditions: cold water from the network / water from the mixing valve / water in the water heater tank)

FEATURES AND ADVANTAGES OF JÄSPI VLM-/VLS- and VLK-series WATER HEATERS JÄSPI water heater is a reliable choice of the client.

Manufactured model range JASPI VLM - 100, 160, 220, 270, 300, 500 liters (600, 1000, 1500, 2000 l), VLK - 15, 30, 60, 100 and 160 liters, VLS - 100, 150/160, 200/220, 300 liters.

The tank material in JÄSPI water heaters is high-quality, ferritic, acid-resistant stainless steel, which is designed specifically for the production of water heaters (tank warranty - 10 years, see technical data sheet).

The latest robots and production techniques are used in the manufacture of water heaters. We have quality certificates ISO 9001 and ISO 14001, GOST R certificate and Sanitary-Epidemiological Certificate.

The permanent equipment of VLM boilers includes a main switch, a temperature control and limit thermostat (VLK series 2 kW - ready-made cable with socket plug) and a valve group. They are located behind an easily removable service panel out of the reach of children. The water heaters are also equipped magnesium anode, increasing service life. Sufficient space for installation (especially VLM-300 SPACE), removable side panels, adjustable stands, a special connection plug that is safe from an installation point of view, as well as many other features that make installation easier are important for installers.

Standard electrical power is 3 kW (VLM-500 6 kW). By special order, all models are also manufactured with high electrical power.

The standard delivery color for the VLK/VLM series is white. By special order, water heaters of other colors are also available (beige and steel/stainless steel).

Compare modular water heaters from other manufacturers. Pay attention and also find out the material and wall thickness of the tank (we have: from 100 to 300 liters - 2 mm, from 500 liters - 2.5 mm!) and the level of equipment.

• The JÄSPI-VLM/VLS water heater loads all three electrophases evenly.
• JÄSPI VLM models are equipped with a main switch.
• Overheat protection in JÄSPI VLM models is located in an electrical box that is not too difficult to access.
• Adjustment of the heating element thermostat up to +85°C in an accessible place (in the VLM series - behind the removable front lower panel).
• In JÄSPI VLM models, the design pressure and safety valve meet the requirements of 10 bar. The valve group is installed ready.
• More reliable and easier to maintain flange mounting of the electric heating element (heating element is acid-resistant alloyed special steel INCOLOY).
• All JÄSPI water heaters can be cleaned if necessary through an opening hatch/flange.

The VLM series also includes water heaters with an indirect heating coil and a 3 kW electric heating element (on request with higher electrical power), as well as 300 l water heaters with a solar charging coil, then Kermi radiators and convectors.

Indirect water heaters Finnish mark Jaspi are manufactured with tank volumes from 200 to 2000 liters and can be used for cooking hot water V residential buildings and industrial facilities. The ergonomic rectangular shape allows them to be compactly placed in the boiler room, and a convenient hatch in the lower part provides access for cleaning and repair.

Advantages of Jaspi indirect heating boilers

• internal tank made of AISI 444 stainless steel with a thickness of 1.5-2mm. Special chromium, titanium and niobium additives provide additional protection against pitting corrosion
• all welds are made by laser using fully robotic equipment

• Each Jaspi boiler is tested at the factory before going on sale. Maximum working pressure- 10 Bar
• thermal insulation is made of freon-free polyurethane foam with record low thermal conductivity, 50 mm thick
• flanged electric heating element made of Incoloy Alloy stainless steel - included in delivery. Three-phase connection, control of own thermostat. The flange hatch can be used to clean the internal tank from sediment
• Indirect water heaters under the Jaspi brand include a complete valve group with a mixing and safety valve, a recirculation fitting
• tank warranty - 10 years

If you are planning to buy a Jaspi indirect heating boiler, our engineers are ready to provide comprehensive support in matters the right choice models, calculation of water consumption and design of a boiler room.