Estimate for installing a fence made of corrugated sheets: materials and list of works. Estimate for a fence made of corrugated sheets Local estimate for installing a metal fence

Fencing the territory of a summer cottage, country cottage or private house within the city is certainly necessary. And not only for safety reasons and for marking the land that belongs to you. A fence can also become a decorative element, provided that it is erected carefully and supports the architectural style of the house.

The latter is not at all difficult, since the modern fencing market allows you to select materials for the construction of a fence with the parameters you need. There are many ready-made fences for sale for every taste. An important question in this case is how to make an estimate for installing a fence made of corrugated sheets or other material.

We build a fence from corrugated sheets

Elements of a fence made of corrugated sheets

Increasingly, the choice falls on fencing made of corrugated sheets, which is not surprising, given the significant list of its advantages: low cost, durability, weather resistance, variety of sheet colors and sizes, various types of profiles, simple and quick installation.

Despite the ease of installation of a fence made of corrugated sheets, you need to approach it wisely, having carefully calculated everything. It would be more correct to draw up an estimate so as not to forget anything and not to overpay by purchasing unnecessary materials. But before you start compiling it, evaluate the perimeter of the site - its size, the nature of the soil, height differences and other features.

Preparation for drawing up an estimate: dimensions of the fenced area

If you have a site plan, this will significantly reduce the time of the preparatory stage, since the main dimensions can be taken from it. If there is no plan, select a starting point, retreating from which you will begin measuring. Prepare wooden pegs, a roll of rope, a builder's level and a measuring tape. Try to “outline” the perimeter as evenly as possible, this will facilitate the subsequent installation of the fence.

Site marking

Place the first peg at the starting point and, using a level, step back 1.5-2 m and place the second one. Thus, you need to mark the entire territory. Please note that pegs must be placed at its corners. After marking, stretch the rope between them. Now you can use a centimeter and measure the length of the future fence.

Preparation for drawing up an estimate: sketch of the fence

Advice: In order to determine the consumption of corrugated sheets, the number of supports and other parameters, you cannot do without a sketch. Let it be just drawn by hand - it's not that important, even such a simple project will help you get the overall picture.

Start by selecting the fence height you need. Decide whether it will be the same along the entire perimeter of the site, or whether in its lowlands you will install higher sheets of corrugated sheets so that the fence remains even in height.

Sketch of a fence

Calculate the required length of supports. Determine what they will be made of. Traditionally, these are profile pipes connected to each other by similar pipes of smaller diameter or steel angles. But you can build, for example, brick supports. Please note that the depth of the metal pillar in the ground must be at least 30 cm, this means that its length exceeds the height of the corrugated sheet. The optimal height of the sheet is 2 m and for it the support length should be 2.5 m or more.

Decide how monumental your fence will be. Is the soil dense enough to be limited to driving the posts into the ground without additional manipulation? Or maybe they will need to be filled with concrete or even a strip foundation? Consider the climatic features of your region and the location of the site: “wind rose”, the risk of flooding in the spring and during rains.

Choose the optimal step between the supports during installation, preferably no more than 2.5 m. Decide on the location of the gate, the direction of opening and its dimensions. And of course, choose the color and profile of the sheet, the color of the posts and the fittings for the gate. Now you can draw a sketch of the fence.

Selection of corrugated sheets

Choosing material

First, let's look at the possible coatings of corrugated sheets:

• Galvanized, without additional processing. The most affordable and of lower quality, it is often used for fencing outbuildings;
• Corrugated sheeting with polymer coating. More expensive than galvanized by about 40%. Special anti-corrosion components are usually added to the paint coating of such a sheet, and the paint itself is resistant to fading. The application of the polymer layer, as a rule, occurs only on one side of the profiled sheet;
• Corrugated sheeting covered with a plastisol layer. Such sheets are resistant to mechanical stress, they are thicker, but their cost is higher.

Brands of corrugated sheets that can be used to erect a fence include:

• C8: has a low profile height (8 mm), suitable for temporary fencing;
• C10: profile of an interesting trapezoidal shape, 10 mm high and 0.5 mm thick; widely used for the construction of fences, roofing and cladding of buildings;
• C20: wavy with a profile height of 20 mm, rigid, has good load-bearing capacity;
• C21: convenient meter wide usable area (excluding transverse overlap), increased profile, high sheet rigidity.

Thus, the best option for building a fence in terms of price/quality ratio is C21 grade corrugated sheeting with a one-sided polymer coating. And due to its size, it will be easier to calculate the need for profile sheets.

Budgeting

Sample estimate form

The principle of drawing up an estimate differs depending on whether you will install the fence yourself or hire a construction team. If you entrust the installation to professionals, then the “Cost of construction work” section will need to be added to the estimate calculation. In this case, a price list with prices for the work will need to be requested from the contractor.

If the installation is carried out by yourself, then you can limit yourself to the main section “Cost of materials”, which, if available, includes transportation costs (see sample).

Let us consider as an example the most common case: self-installation of a fence made of corrugated sheets with supports - profile pipes, with a recess into the ground of 0.8 m. Let us set the following initial data: a section of 150 m around the perimeter, leveled, blue C21 corrugated sheet, 2 m high and useful width is 1 m, the step between supports is 2 m. Let's start calculating the estimated cost of the fence:

• First, let's calculate the required number of profile sheets. To do this, divide the perimeter of the territory by the width of the sheet (150.00 m / 1.00 m), we get 150 sheets. It is advisable to purchase a couple more sheets in case of defects during the installation process. Total – 152 profiled sheets;
• Now let's calculate the number of pillars, both vertical and horizontal. We will purchase two types of supports – pipes 60*60 mm and 40*20 mm. The number of vertical pillars, 3 m high, will be: 150.00 m / 2.00 m = 75 pcs.; number of horizontal ones (2.6 m high; two pillars between supports): (150.00 m / 2 m) * 2 pcs. = 150 pcs., where 2 m is the pitch of the supports;
• Self-tapping screws, the optimal number of which is 6-8 pcs. on one sheet. When calculating from 6 pcs. we get: 152 pcs. * 6 pcs. = 912 pcs., but it won’t hurt to buy a little more;
• Enamel for pillars - consumption per one is approximately 40 ml, total: 0.04 l * (150 pcs. + 75 pcs.) = 9 l;
• A mixture of crushed stone and gravel to strengthen the supports: approximately 3 kg for each pillar: 3 kg * 75 pcs. = 225 kg;
• Plus other materials: metal circles for an angle grinder, fittings for a gate, paint brushes, etc.

Cost of construction work:

• Square profile pipe 60*60: 50 pcs. * 150.00 rub. = 7,500.00 rub.
• Rectangular profile pipe 40*20: 100 pcs. * 80.00 rub. = 8,000.00 rub.
• Corrugated sheeting: – 250 sq.m = 62,500.00 rub.
• Concrete: 9 cubic meters * 2,300.00 rub. = 20,700.00 rub.
• Grinder circles: 15 pcs. * 40.00 rub. = 600.00 rub.
• Metal paint: 8 kg * 100.00 rub. = 800.00 rub.
• Self-tapping screws: 600 pcs. * 4.00 rub. = 2,400.00 rub.

Other expenses:

• Transport costs: RUB 3,000.00
• Unforeseen expenses: RUB 5,000.00

Total: RUB 110,500.00

Advice: It is convenient to use spreadsheets to prepare estimates. How to do this is shown in the video:

The estimate is prepared at market prices. When installing a fence with concreting the supports, you should include the required volume of the mixture in the calculation based on the pouring depth. In this case, it will be possible to reduce the length of the supporting pillars.

Sooner or later, owners of suburban areas think about fencing their territory and, accordingly, the need to draw up an estimate for construction. If you want to build a fence at your dacha with your own hands, then you should include in the estimate:

1. Cost of materials. To keep the budget minimal and the fence optimal, pay attention to the components and clarify their characteristics. If you want to save money and take thinner, smaller, used metal (especially used corrugated sheets), with the wrong degree of protection, or available material, all this will ultimately affect the beauty and strength of the fence. If you bought unfinished pillars, joists, or gates with a wicket, their production will add to the cost of the final product. Of course, today in Leroy Marlen you can purchase all the necessary materials for the fence. But the metal and corrugated sheets in Leroy Merlin will most likely be quite thin, although cheap. But self-tapping screws, fittings for gates with a wicket and other small things necessary for installation will be expensive. Additional factors influencing the cost of a fence include the presence of wickets and gates, double-sided covering of the sheet, a canopy, forging and any other decorative elements, as well as a small supply of material. If we are talking about the need to fence the area with corrugated sheeting and invest in the minimum possible amount, also think about the need for roofing screws, decorative strips on top, mortise locks and some non-standard fittings for gates with a wicket. The fence does not tolerate any excesses to a minimum, so think about the need for concrete work.
2. Cost of loading, delivery and unloading to the fence installation site. This is an important point that many people forget when they want to build a cheap fence with their own hands. You will rarely be able to save money here, and even vice versa, because you will most likely order all the components from different places. And if you order profile pipes from a metal warehouse, they are usually six meters long, so cutting them should also be included in the budget.
3. Cost of work to prepare the site for installation. Nothing should interfere with the construction of the fence: old fencing, bushes, trees, tall grass, embankments, unnecessary things - along the installation line you need to have a working space of about a meter on each side. Of course, you can do this work yourself.
4. Installation cost. It all depends on the complexity of installation: the number of logs, the pitch of installing the pillars, the method of installation (in concrete or not), the number of gates and gates, whether all components of the fence are ready for installation, whether anything interferes with the installation (soil, buildings along the fence line, neighbors and other). Pay attention to your soil; if it is compacted clay, bulk earth mixed with stones or other heavy soil, then it is unlikely that you will be able to drill through it with a regular gas drill and you will have to resort to additional costs for plugging pipes. And then you won’t be able to put up a fence for your dacha with your own hands cheaply. Standard installation of fences made of corrugated sheets, the price for work per 1 meter will cost from 300 rubles. But fencing companies rarely offer work without material, so installing a fence from corrugated sheets at shabashniks will cost from 70% of the cost of the material.
5. Associated costs: electricity, gasoline, paint, electrodes, bits, cutting discs, screws and, most importantly, your nerves.

Let's calculate the approximate budget for a standard fence made of corrugated board for 6 acres. The configuration of the plots may be different, but most often 6 acres is 30 m by 20 m (600 sq.m.), the perimeter will be 100 linear meters. For example:

• a fence of 8 acres is approximately 20 m by 40 m - 120 linear meters. m;
• a fence of 10 acres is approximately 25 m by 40 m - 130 linear meters;
• fences of 15 acres are approximately 30 m by 50 m - 160 lm.
• SNT fences are most often more than 300 linear meters.

To install an inexpensive fence 100 meters long with a gate and a wicket without a foundation, 2 meters high, on 2 logs, we will need 38 posts (metal profile pipe 60x60 mm, wall thickness 2 mm, length 3 meters), 64 logs (metal profile pipe 40x20 mm, wall thickness 1.5 mm, length 3 meters), 87 sheets of C8 corrugated sheets (thickness 0.5 mm), standard gates with a wicket, add to this the costs of screws, bits, cutting discs, paint, electricity, electrodes, covers for poles material, delivery and installation.

The approximate cost of a standard fence made of corrugated sheets in April 2019 using our own resources in the Moscow region will be about 210,000 rubles. If you use an online real price calculator, the cost of material and installation will be: 120,000 plus 3,000 rubles delivery.

• a 20-meter fence made of corrugated sheets with gates and a wicket will cost 32,000 rubles;
• a 50-meter fence made of corrugated sheets without an entrance - 59,000 rubles, every subsequent 10 meters + 11,800 rubles.

Our company “Fence at the House” works at minimal prices due to the well-coordinated processing of large supplies of rolled metal in our own production, a well-structured scheme of working with customers and a professional installation cycle on site. We can offer the most competitive price for all our products and therefore we install a lot of garden fences. Thus, if you order a standard fence made of corrugated board from our company, it will be profitable. But you can really save money on a gauge, a strip, roofing screws, and double-sided corrugated sheeting. A significant help to the budget is to order a fence together with your neighbors, but you should take into account the fact that during a joint installation, disagreements may arise regarding the choice of material, color and height.

Price list (prices are agreed upon after measurements and receipt of technical specifications for the work)

Approximate price for the fence.

Gates and wickets, price.

Prices for sectional fences.

Wooden fence (m.p.).

Metal picket fence (per m.p.).

Painting a fence RUR 100

Fence dismantling: from 100 rub. per m.p.

Delivery: 4000 rub.

Generator: 1800 rub. for 1 day of work, gasoline separately

Installation of a fence with your material from 600 RUR. m.p. up to 950 with concreting.

Services for drilling holes for pillars up to 400mm, holes for pile foundations,

Our company carries out work on installing a metal fence at a price per linear meter below the market price. The complex of works to install a fence on your site or dacha is quite a difficult and painstaking task. The correct and high-quality implementation of this process is influenced by several necessary factors:

• Total weight of the entire structure;
• Characteristics of the soil at the installation site;
• Terrain;
• Surface inclination angles;
• Wind direction and windage of the structure.

If the owner has an engineering and technical education, it will not be difficult to make all the necessary calculations. But a person who is not familiar with such calculations will not be able to carry out the correct installation on his own, which will lead to accelerated wear and tear of the fence.

We have the most inexpensive price for installing a metal fence

In addition to the main protective function, modern fences also have a decorative function. When designing, landscape design masters take into account the design, type and color of the future fence. From us you can order the services of a specialist in the calculation and production of the required design of the fence you need. Low prices for materials and finished products, as well as prices for installation work will pleasantly surprise you.

Our company’s specialists can install a cheap fence in St. Petersburg

On our website you can arrange a call for our professional craftsmen to perform the necessary measurements and calculations, as well as turnkey construction in the Moscow region. The fences installed by our professionals have a large number of valuable advantages:

• Reliability;
• Durability;
• Practicality;
• Ergonomics;
• Modern design and aesthetics.

Vast experience in this field allows us to guarantee only excellent results. Materials used in the manufacture of fences and poles undergo mandatory testing to ensure they are safe for the human body and are free from radiation and other harmful factors and radiation.

You will find all information on prices in the price list for fence installation

Find out all the necessary information about prices for our products, as well as for the work carried out in the price list located on our website. The high quality of our products, low prices, friendliness and high professionalism of our employees will allow you to become our regular customer for many years.