How to patch a fabric sofa. How to make the consequences of pet attacks invisible on sofas and armchairs. Classic sofa pie with a spring block and possible problems

There is upholstered furniture in every home. Such interior items are expensive, so it is important to pay a lot of attention to their care, because they are not changed every season. The sofa is designed to serve its owners faithfully for many years. But there are situations in which it is difficult to blame anyone, because anyone can make a mistake and accidentally ruin the upholstery with a drink, food that will leave a greasy stain on the furniture, or a cigarette that will completely burn through it.

We offer you several methods designed to return the sofa to its original appearance and cheer up the mistress of the house, because it is usually the fair half who is upset about this.

How to disguise a hole in a sofa?

Upholstery reupholstery

If we are dealing with large-scale damage, it is easier to think about the problem rather than methods for masking the hole. Today, reupholstering a sofa, although a troublesome task, is quite doable. If you know how to handle some tools, have enough free time, have the desire and patience to create, do everything yourself. Otherwise, it is better to entrust this work to a professional and enjoy the resulting result, without wasting a single nerve cell, but paying a substantial amount to the craftsmen for the work.

Cape

Emergency help in case of damage to the sofa can be the purchase of a blanket or cape that will cover the hole and prevent the hostess from feeling uncomfortable in the presence of guests.

Now let's look at ways to seal small holes in upholstery. Here you should start from the material with which the sofa will be upholstered.

"Liquid Skin"

If we are dealing with a high-quality substitute, a special “liquid skin” solution is suitable, which is used as follows:

the surface of the sofa should be degreased (moisten a cotton swab with alcohol and wipe the area where the paste will be applied);
carefully place the paste into the hole;
press the napkin on top;
iron.

After this procedure, the hole should disappear before your eyes, especially if the color was well chosen. How is this possible? The fact is that the paste fills the hole and melts under the influence of high temperature. This makes the surface of the furniture look solid and undamaged.

Sewing

If the upholstered furniture is upholstered with one of them, then you can try to sew it up yourself. It is important to understand here that you cannot do without a patch, since if you start tightening the edges of the hole, you can make it even larger. Take a piece of similar material, insert it inside the hole and sew it in a circle. Keep your stitches small and hidden, and buy a needle and thread designed specifically for this purpose.

There's nothing more comfortable than soft . But years of service, restless animals, children and guests can do the seemingly irreparable: tear the upholstery. Tears, holes, random cuts, and now you and I will repair them so that not a trace remains. And we don’t need any professional nearby.

Prepare: a couple of hours of free time; a round leather patch cut from thin but strong and elastic leather scraps; scissors; cleaner on water based, safe for leather materials (oil-based products simply will not adhere to leather); a hair dryer that can withstand quite a long period of use without interruption; water-based glue, safe for leather materials; leather-safe dye or several for mixing (to match the color of the upholstery); glass jars for mixing paint; paint sprayer or wide brush.

Cleaning

Apply the entire area on the tear and widely around it with a water-based (!) cleaner, safe for leather materials. When buying such a product, look for the inscription “leather safe” or “safe for skin” on the packaging.

Drying

If it's not humid outside, air drying (or naturally drying indoors) is the most best option, but if time is pressing, a hairdryer will also work if used carefully (i.e. on the lowest settings and keeping the device away from the skin). Be careful: you don't want the leather to dry out and wrinkle (that's permanent!) when exposed to high heat. In principle, it is best to use a hair dryer with a diffuser: it will help you better control the flow of hot air. Allow the washed area to dry completely.

Now let's patch everything up

The next step is to insert a cut circle of leather between the padding (or inner layer of outerwear) and the back of the torn leather surface. Always make sure that the patch is noticeably larger than the tear. Never use rectangular or square patches: disguise sharp corners under the leather surface it is much more difficult.

To find a patch, go to second-hand stores: look for cheap leather skirts, which are usually made of very thin leather, which is nevertheless reliable and elastic.

We glue

We use water-based glue, safe for leather materials, to fix the patch under the upholstery/surface. Make sure to always use water-based glue! Don't be afraid to apply multiple layers of glue. You can always wipe off any excess once the patch is securely in place.

Masking the patch

If it happens that you are dealing with a clean and straight (up and down) cut, accidentally caused by an unsuccessful movement of a razor blade or knife, then simply glue the two sides of the cut together - with the same water-based glue. In many cases, the result here will be almost perfect. Then you can skip steps 6 and 7 and continue from step 8.

Mixing paints

If the damage to the leather upholstery/surface is wider than a cut, use the paint described above. But there are some difficulties here: not a single color will suit right out of the bottle. You will have to mix several dyes in a separate glass bowl (perhaps trying to add different dyes in small quantities over and over again) to get the exact shade if you want the sofa/jacket to really look like new after repair. But it's not science: you just have to practice mixing until you get it right. Thin the paint with a small amount of water so that it is easier to spray or apply (both when using a sprayer and when choosing a brush).

Hint: More shades of paint can be found in art stores.

Apply paint

The paint will work like a filling. The sprayer is, of course, better - the paint will sit better, more evenly, and more tightly. They cost about 2-3 thousand rubles, but you can generally find an attachment for 400 rubles. If you choose a brush, then you need a brush with soft bristles. Apply a top coat of paint, which will seal and seal the gap and ensure the area resists scuffing and fading.

Tip: The process of decorative fluting (airbrush retouching) of "orange peel" over the drying paint will help smooth out any possible imperfections.

Completion

Apply several coats of paint to the tear and surrounding area. This will help smooth out the difference in sheen between the original material and the patched area. So even if the shade of paint you mixed up is slightly off, to the untrained eye the area that has been repaired will not be visually noticeable. Let it air dry (now only and exclusively in the air, i.e. naturally indoors, for example). Using a gentle, fine sandpaper, remove any imperfections, and your soft leather upholstered treasure will look as good as new!

Leather upholstery for furniture is considered one of the most the best materials. It combines durability and presentable appearance. But during use, stains and scratches will still appear. It is possible to carry out minor repairs to leather furniture on your own, although much depends on the nature of the damage. If the contamination or defect is not removed in time, the furniture will lose the value and richness of the color of the upholstery. With scratches and cracks the situation is even worse - if repairs are not started in time, the crack can grow to such a size that it will be easier to buy a new sofa.

To choose the right materials, you should carefully evaluate the condition of the furniture. This is necessary to understand the nature of the problem and determine how to fix it. To repair leather furniture, you may need professional tools that are not advisable to buy for one-time home use.

If we are talking about simple contamination, then it will be enough to prepare a cloth and alcohol. Repairing cracks is a little more complicated. Before starting work, you will need to acquire construction tools - they will be used to dismantle furniture and remove old upholstery. This is a set of screwdrivers, wrenches, screwdriver, pliers, staple removal tool. Changing the material involves using a staple gun. This basic set tools.

There are repair options using paint, liquid leather and other improvised means. Therefore, it is worth purchasing them in advance. Don't forget about the sofa's filling - the material may also need to be fully or partially restored. Foam rubber is often used as a filler. You definitely need to get some thread and a needle. A sewing machine will do the job faster. If you plan to partially or completely replace the upholstery, then you will need large quantity new material.

Repair and restoration methods

For leather furniture, stains are not as critical as physical defects such as cuts or scratches. There are several main methods for restoring such furniture, aimed at both full or partial restoration of the material and hiding defects. The upholstery will not look the same as before, but the scratches will be invisible. The following repair methods can be noted:

Most in a simple way Repairing leather furniture using a product called “Liquid Leather” or its equivalent is considered;
The scratch is painted over with varnish or paint matched to the color of the upholstery. Here we are talking only about camouflage;
An applique is applied to the damaged area or a patch is sewn on if this does not affect the appearance of the product;
The most difficult and time-consuming process is the complete re-upholstery of the material. You should resort to it only when repairs with liquid leather no longer help;
Replacement of accessories. In some situations, it is not the upholstery itself that needs repair, but decorative elements or fittings.

Liquid skin

If you have to work with major damage, you will need to fill the void with foam rubber or cotton wool. This area is glued from the inside of the upholstery. Using the table supplied with the liquid leather, you should select the most suitable color. The damaged surface is cleaned, degreased, after which the leather furniture is repaired with your own hands. There are no special rules for applying “Liquid Skin” to the surface. The liquid can be applied either with a brush or with a spatula. There is a trick that allows you to give the area restored using the specified product the texture of the original material - you need to attach a sample from the sofa to the damaged area.

Choosing the right shade

Clean the coating and apply the composition

Result

Painting

Painting helps in situations where, after a long period of use, furniture has lost its appearance due to wear and tear. In this case, you should carry out a minor cosmetic repairs by painting. The paint itself can be produced both in the form of an aerosol and in the form of a spray, so it will be easy to repair leather furniture. First you need to evaluate how well the paint matches the color of the upholstery, and, if necessary, mix several shades to obtain the desired color.

The damaged surface is first cleaned of dirt and then degreased with acetone. It is better to use sprays, they are more convenient to use. The paint should be applied in several layers. It is important that the previous coat of paint is dry before the next coat is applied. To make the paint dry faster, you can use a regular hairdryer.

Choosing paint

Treat with acetone

Applying the composition

Painting is finished

Padding

The list of items that should be included in the repair kit is described above. First, the sofa is inspected, after which the old upholstery is dismantled. The side and back parts of the sofa, as well as the seat, can be removed using a hexagon or wrench. The staples holding the upholstery are removed with a special tool. It is better to remove the old filler, even if it is in good condition, for a while to assess the condition of the frame. If this is necessary, the filler is replaced with new foam rubber, and damaged parts of the frame are also changed.

The pattern for the new upholstery should be made with a margin of 10 cm, while focusing on the old upholstery. After all the parts are cut out, you can start sewing. If you lack the necessary skills, this process can be entrusted to a specialist.

The constriction looks like this:

The cut out element is placed on the upholstery of the sofa. The material must be placed in the center of the furniture;
The fabric is wrapped around the edges, and at the same time tension in the material occurs;
The upholstery is secured using staples, which should be located at least 4 cm apart from each other.

You need to start working from the middle and move towards the edges. This will ensure even tension.

Patches

Stripes can solve the problem of scratches. The essence of the method is to cut and paste a piece of skin larger than the scratch itself. The patch must be round, although other shapes are allowed. The cut out patch is glued to the bottom of the crack. As for the glue, it must be water-based. It is very difficult to choose a patch that will not differ greatly from the main material, but even if you manage to find such material, the difference will be visible. In this situation, it is worth using additional paint. The repair is completed when coloring matter will dry out.

Treating the surface

Seal the hole

Making a patch

Glue the patch

Overlays

You can repair leather furniture at home using overlays or appliqués. This method can be called unusual, because it radically changes the appearance of the furniture. An overlay differs from a patch in that it is placed on top of the upholstery. The overlay serves to prevent further crack growth. Accordingly, the owner of the furniture realizes that the sofa or chair will no longer have its original appearance. But this can be avoided with a little imagination. Using contrasting overlays, you can create an unusual pattern - it can be an abstract drawing or a specific image. It is better to place the pad itself on glue or sew it with thread.

Threads and needles should not be used because they leave marks, which eliminates the possibility of moving the lining to another place without consequences. Using glue leaves room for error. As with conventional crack sealing, the desired area should be degreased before installing the overlay.

Wipe the coating

Seal

There is a type of adhesive designed for working with leather. You need to look for a product called universal leather glue. The specificity of the process lies in its effectiveness only for small cuts and cracks. Restoring leather furniture requires careful application of glue. You can apply the glue with a toothpick, match or similar sized stick. After applying the glue, press the edges of the scratch firmly. These edges can also be tied together with synthetic thread. All excess glue must be removed. It is not always possible to carry out this procedure unnoticed, that is, the place of gluing will still be visible. Then the damaged area of the material should be polished and painted.

Dmitry Chief Technologist at HEGGI

If the hole is not large, then it can be sealed with special liquid leather or darned. But if the hole is larger than 5 cm, believe me, it’s better to reupholster your furniture.

The classic said that “nothing in the world lasts forever”! Unfortunately, this statement applies to absolutely all people dear to our hearts, as well as objects that mean a lot to us, including our favorite furniture that has surrounded us at home for many years.

Timely cleaning and disinfection of cabinet and upholstered furniture These are required elements. But there are situations when little depends on the owner of the product (one of the guests burned the sofa) or he notices complex contamination too late. A particularly unpleasant moment can be a hole in the upholstery of your favorite chair or expensive sofa!

How to fix a hole in a sofa?

If it is of considerable size, then it makes sense to think about completely replacing the upholstery material, but this process requires, as you well understand, the intervention of a professional, whose services can be expensive. At the same time, you do not have to take your upholstered furniture to the workshop (this, by the way, is also an additional material expense) - today you have the opportunity to call a furniture craftsman to your home, where he will do his work.

Another solution to this problem is a regular blanket. Pick up a cover for upholstered furniture at your nearest textile store and cover the sofa seat with it. If neither one nor the other method suits you, then you can use the following useful recommendations. Fixing a hole in upholstered furniture primarily depends on what type of upholstery material is used. It can be fabric, natural or artificial leather, suede and much more.

There are a considerable number of special solutions and devices designed specifically for removing damage from the surface of upholstered furniture. These include the so-called “liquid skin”. This special solution has the consistency of a paste. It is carefully placed in the hole on the sofa and pressed with a dry napkin. Then an iron is placed on it (1-2 seconds is enough). After these steps, the napkin is removed, and if the color of the “liquid skin” is chosen correctly, then in the place where there was a gaping hole a couple of minutes ago, nothing will be noticeable - the upholstery is like new! The principle of operation of this method is simple - the paste fills the hole and melts under the influence of high temperature, after which the surface looks solid and undamaged.

You can also try sewing up the upholstery hole yourself at home. How to sew up a hole in a sofa? - it’s not difficult, but only take on the task if you are confident in your abilities, otherwise you can ruin everything even more. Take a piece of the same or similar fabric to the upholstery and make a patch. Remember that the stitches should be small and “hidden” (invisible to the human eye). In this case, you need to use only special furniture accessories for sewing: threads, needles, etc.

Elena Chief designer of HEGGI

Any thing deteriorates over time and upholstered furniture is no exception. But in the case of furniture, it is possible to restore its original appearance and properties. This article will discuss reupholstering a sofa yourself. How, what and in what order should be done, what materials should be used.

Damage and types of repair

Damage to a sofa or other upholstered furniture can vary in severity. Depending on the existing injuries, a different range of work is required. Here's what could happen to your furniture:

So reupholstering a sofa may include various works. From simply replacing the upholstery to a complete renovation, including part of the frame. The most troublesome part is with the spring blocks. This is long and painstaking work. If the “historical accuracy” of your furniture is not important to you, it is easier to replace a failed spring block with foam rubber or (better, but more expensive) furniture silicone. If everything is done correctly, the sofa will become even more comfortable: incorrectly tightened springs cause a lot of inconvenience.

Types of "soft part"

IN general outline Let's talk about what the seat and back of the sofa can be made of. There are options:

Without springs:
- Foam rubber (polyurethane foam, also called PPU) high density(also called furniture).
- Foamed latex. In terms of quality and convenience, it is better than foam rubber, but also much more expensive.
With springs:
- with classic springs connected into one block;
- snake springs that support the foam/latex filling.

These are the most common types of sofa seats. In more expensive models, the spring block can be supplemented with a layer of polyurethane foam or latex, which makes the seat more elastic and comfortable at the same time. When reupholstering, they then look at the condition of both parts, replace or leave them - depending on desire and capabilities.

But that's not all the layers. In addition to springs, polyurethane foam/latex, padding polyester or thermal felt (or regular felt) are also laid. This is if the sofa is more or less modern and not too expensive. Older exhibits may contain matting or burlap, batting (or something very similar), horsehair, dried seaweed and other now almost exotic materials for sofa stuffing. When repairing a sofa, they will need to be replaced with the same ones (if you want to look) or similar in thickness and properties. So, to understand how a sofa should be reupholstered, first understand what’s inside it.

We disassemble the sofa and assess the scale of work

Reupholstering a sofa begins with disassembling it. In the process, you will be able to assess the extent of the damage and decide what exactly you need to do. For this part of the job you will need:

a large screwdriver to unscrew visible bolts (if any);
a small flat-head screwdriver, pliers or staple remover - to remove the staples that secure the upholstery.

The main thing is to remove the old upholstery. Then everything will become clear

Actually, that's all. First, remove the individual pillows, if any, and remove the side panels. It’s difficult to suggest here - there are many designs. Look carefully, you are sure to find something. If you have retractable parts, you can try starting with them.

Separating the upholstery

The next step is to separate the fabric from the frame. It is attached with staples to wooden blocks frame. We pry the staples with a flat screwdriver and pull them out. Some may fit very tightly; it is easier to pull them out by grabbing them by the raised back with pliers or pliers.

We remove the fabric carefully, trying not to damage it too much. We will then use it as a sample for new sofa upholstery. There are several layers underneath the upholstery fabric. Maybe felt, padding polyester, some kind of fabric. If the sofa repair was started only to replace the upholstery, look at the condition of these materials. If there are signs of wear, it is better to replace. After all, it will be a shame if in a few months the sofa needs to be reupholstered again, but this time because the layers of the lining have been removed.

Once the fabric is removed, it's time to evaluate which parts you'll need to replace. Everything is clear with the upholstery and lining underneath. It is advisable to keep the pie in the same composition. If old materials were used that are not currently on sale or are too expensive, replace them modern analogues. The main thing for folding sofas- reach the same height of the seat and backrest that were before, since the folding mechanisms are designed for certain parameters of the “pillows”. In order not to be mistaken with the thickness of materials, find unworn (or least worn) areas and measure the thickness.

Assessing the damage

This stage is needed if the sofa seat is uneven, there are humps and depressions, protruding springs (and from below too). In seats that consist only of foam rubber, everything is simple: they are usually replaced. They can be made from high-density foam rubber by folding several layers; you can order ready-made foam rubber at a store that sells furniture spare parts. It is wise to order a latex mattress according to exact dimensions (measure after removing the fabric and all layers).

If the sofa has springs, remove all the covering layers to get to them. If there are no burst springs, the frame and its connections are strong, without play or cracks, the backing for the springs is in good condition, you can stop there. We change the covering layers, sew a new cover, stretch it and fasten it. This completes the reupholstery of the sofa.

One of the common defects of spring blocks is a broken spring. There are also sofas with spring snakes that are attached to the frame and give elasticity to the foam mattress standing on top

If there is any damage listed above, the spring unit will have to be separated. It is attached to the frame frame using U-shaped brackets or nails. Now you have completely disassembled your sofa into its components. Next is the replacement and repair of damaged parts, and then reassembly.

Classic sofa pie with a spring block and possible problems

To understand how to repair a sofa at home, you need to know what layers of materials are needed and in what order. For example, in a sofa seat with a spring block the sequence will be like this (from bottom to top):

Frame made of plywood or wooden blocks. Plywood frame more reliable, but longer and more difficult to make. Therefore, pine bars are usually used. They are connected according to the tenon-groove principle, gluing the joint with wood glue. If desired, the connections can be strengthened with dowels or corners (aluminum).
Spring block base. There may be options: lamellas (straps of elastic material), fiberboard, plywood. Most budget option- Fiberboard, the most expensive - lamellas. The lamellas are attached to special stops (lamella holders). When using plastic stops, there is a risk of them breaking. In this case, low-quality lamellas can bend (in normal condition they are curved slightly upward) or break - to reduce cost they are often placed at large intervals. All this leads to the fact that the sofa seat is pressed through. Instead of wooden slats, there may also be snake springs. They also have sufficient elasticity, but cost less. The problems with them are the same.
The spring block itself. The block can be with independent or dependent springs. The first one is cheaper, the second one supports the body well. Such mattresses are also called orthopedic.
Felt or thick fabric(teak or other similar dense fabric will do). This layer is needed so that the springs do not push through the foam rubber located above.
If the fabric is thin, it will tear, and then the foam will begin to crumble. But this is not the saddest thing - the lamellas were bent in the opposite direction. In normal condition they should be curved upwards
Polyurethane foam(PPU, foam rubber - all names of the same material). Special dense foam rubber is used. If you choose, in addition to density, look at such an indicator as the durability coefficient - the higher the number, the better (and more expensive). This indicator reflects how long the foam will take to restore its original shape after removing the load. Its thickness is taken according to the original, factory cake. You can make it thicker without restrictions only on upholstered furniture that does not fold out (banquette, sofa, armchair).
Sintepon. This is necessary so that the fabric does not “erase” the polyurethane foam. It is usually glued to a layer of foam rubber so that it does not bunch up during use. The glue is taken in a can.
Upholstery fabric. The best are tapestry, chenille. They don't fray and it's easy to sew with them. Flock and jacquard are good fabrics, but some of them “creep” at the seams. Therefore, when you sew, the seams need to be strengthened. By the way, it is better to sew upholstery for a sofa using special Tytan brand threads. Regular ones, even thick ones, will quickly tear.

These are all the layers and their features. You can add something (for example, a double layer of padding polyester), but removing it is highly undesirable.

The design of a sofa on snake springs and options for its restoration

Snake springs in expensive models are used as an additional means to increase elasticity. In budget models, a foam block can be placed on this base. They are attached to a wooden or metal frame across the seat - each spring separately. The installation step depends on the planned load. If your sofa begins to sag, or the springs have lost their elasticity or are broken, the solution is to replace them.

To increase elasticity and extend service life, when reupholstering a sofa, the number of “snakes” can be increased. Another option is transverse reinforcement with rigid corsage ribbons (which are used for straps on bags and backpacks).

The tape is nailed on one side to the frame. Professional furniture makers then tighten it using a special tool, but it can be replaced with a regular block wrapped around the middle with coarse-grain sandpaper. You wrap a couple of turns of tape around this beam, pull it with both hands (make sure that the frame does not bend), secure the tape with staples or nails, release it and cut off the excess. The same method is also suitable for increasing the service life of a mattress with slats.

An example of sofa repair with step-by-step photos

The old sofa became completely uncomfortable, began to sag in places and creak. There is no way to buy a new one, it was decided to reupholster and change the upholstery. As usual, reupholstering a sofa begins with disassembly. The legs were removed first. The railings were fastened with two large bolts; they were unscrewed and removed without any problems. Further disassembly is also not difficult - we unscrew the bolts that appear one by one.

When all the components were separated, the old upholstery was removed. The brackets were easy to remove - the frame was made of pine timber. The spring block itself turned out to be without defects, but there was a crack in the frame, one of the frame beams gave way, the fiberboard sagged, although there were no cracks.

Frame repair

Since the frame bears the main load, it is better to replace damaged elements. We carefully measure them, draw them schematically, and put down the dimensions in millimeters. With the drawing we go to the carpentry shop. Please pay special attention: the wood must be dry, preferably kiln drying. If you know how to work with wood yourself, you can do it yourself.

It was decided to connect the frame, as it was, with a tenon/groove, coated with wood glue. But to prevent it from coming loose, the connection was reinforced with metal dowels.

First, the connections are glued and clamped in a vice. A hole is not drilled under the dowel large diameter, the dowel is hammered in. The frame stands in a vice until the glue dries.

We will use 4 mm thick plywood as the base for the spring block. The sheets are standard, a little more than 1.5 meters, and the length of the sofa is almost two. It turns out two pieces. It is better to make the joint of the pieces on a jumper, it is more reliable. Cutting out rectangles the right size, coat the frame with wood glue, lay down the plywood, and nail it with small nails. The length of the nails is so that they do not stick out outside the frame. We additionally support the joint with a plank (50*20 mm).

The updated sofa will serve in the country house, so we try to keep the budget to a minimum; we use an old blanket instead of a backing for the springs. We stretch it well and fasten it with staples using a hand tool.

The base for the springs is an old fleece blanket

If possible, it is advisable to put thermal felt here. It is more reliable and not so expensive. It is cut to size, straightened and nailed around the perimeter. You can use staples or nails with large heads.

Repairing and fixing the spring block

To fasten the spring block, you can use powerful U-shaped brackets, and it is better if their legs are sharpened. But the stapler does not work with these, so we cut staples from steel wire with a diameter of 1.5 mm and hammer them in with a hammer.

In addition to being attached to the frame, the springs are also secured with nylon straps. Twine was taken, folded in two layers, secured with the same wire staples. We tighten the constriction so that it does not press down on the springs, but the tension should be sufficient so that the block does not “move around”.

Some dense material should be placed on top of the springs, usually felt. In this case, the old one was used flooring. Something like felt. It is quite dense and durable. Fold in two layers, cut to size. This layer must be attached to the spring block. The coating is dense, you can’t pierce it with a needle, even a gypsy one. A large diameter awl would be suitable, but there isn't one. We pierce the coating with a nail, which we push through with the handle of a screwdriver. We thread a thick thread into the holes made. The stitch pitch is about 3.5 cm. To speed up the process, we use several nails at once.

Next, “according to plan,” there should be foam rubber, on top of which a padding polyester is placed. In this project, it was replaced with two layers of densely elastic material, which had been stored in the attic for a long time. Instead of padding polyester, another old blanket was used. To prevent the blanket from moving around, it was grabbed around the perimeter with threads (in conventional technology, synthetic winterizer is glued to polyurethane foam or latex using glue from a can).

Case and cover

Upholstering this sofa turned out to be easy: the shape is simple, without decoration. The old cover was ripped open and a pattern was made from new, not very expensive upholstery fabric. In the place that falls on the corner of the sofa cushion/seat, a thick tape was sewn from the inside to prevent the fabric from fraying. The fabric is inexpensive, so the edges had to be rolled up to prevent fraying. They are often left unprocessed.

The finished cover was laid out on the floor, and the restored part of the sofa was placed in it. At this stage it is important that the fabric is stretched evenly and does not wrinkle. We started nailing the cover from the middle, moving towards the edges. Staples with thick backs were used to avoid damaging the fabric.

The back of the sofa was restored in the same way, the armrests were covered, then all the parts were screwed to the folding mechanism. The thickness of the pillows matched, so there were no problems.

The reupholstery of the sofa is finished. The result has been verified :)

According to the test results: the seat turned out to be a little hard, but it’s just right for a tired back. For the home, of course, it is better to use foam rubber, and for those who like comfort - latex.