What grout to choose for pink tiles. How to choose grout color for tiles? Grout for ceramic tiles. Choice of color depending on the color of the tile

Practically in every apartment, in one or several of its premises, the surfaces of walls and floors were finished using ceramic tiles. The range of this material in hardware stores is constantly updated, which causes the desire of many homeowners to regularly change the hallway or kitchen.

If earlier a conventional cement mortar was used to seal the seam between the tiles, nowadays a wide variety of special compounds are available on the free market, which can not only transform the appearance of the base material, but also reliably close the gaps between the tiles, forming an airtight coating for walls and floors. . Grout for tiles how to choose a color - this question arises most often among those homeowners who decide to lay the tiles or “refresh” the appearance of the joints between the tiles on their own, without resorting to the services of designers and professional finishers.

The importance of choosing the right grout for joints

In matters of organizing wall decoration with ceramic tiles, there are no trifles, so the choice of grout must be taken with all responsibility. It's simple - its wrong color can spoil the look of even the most expensive and high-quality finishing material. And, conversely, a well-chosen shade of grout can decorate not only the finish itself, but also transform the entire room as a whole, bring special harmony into it, and also create integrity and completeness of the interior composition.

When choosing a grout for filling joints, it is necessary to constantly focus on several criteria. The main ones are the performance characteristics of the material and the features of the room in which it is planned to carry out the finishing - this includes factors such as its purpose, possible temperature, humidity, and the level of load on the ceramic coating.

In addition, it is necessary to take into account the fact that grout mixtures for interior and exterior decoration differ in their composition and performance. This directly concerns both the reliability of the material and the longest possible shelf life. grout its original color. So, mixtures for outdoor work should have reliable tightness when solidified, high resistance to direct effects of precipitation and temperature extremes with a large amplitude, and resistance to fading under the influence of ultraviolet rays.

Quite time-consuming and complicated, but even if all the work was carried out flawlessly, it’s too early to talk about the result, because the final stage lies ahead - applying grout, or jointing. Grouting takes on a lot of functions and sometimes allows you not only to achieve a complete and harmonious look of the tiled surface, but also to significantly transform it or even mask laying defects. All this is quite possible if you know which tile grout to choose and what to look for in the store.

No. 1. Main functions and types of grouts

Grout is the same essential element when laying karmic tiles, as well as - it is absolutely impossible to do without it, but they are assigned to the grout immediately multiple functions:

Currently the most popular such grouts:

• cement-based- the cheapest and most popular grouts, which are easy to use;
• based on epoxy resin- these are already more durable grouts that perfectly tolerate any negative impacts, but their application requires great skill.

Grouts are sometimes referred to silicone sealants, which are sometimes even called silicone grout, although this is not true, if only because the seams between the tiles are not processed with similar compounds - they designed to insulate tiled masonry from, and other surrounding objects. Over time, under the action of moisture, such a sealant begins to darken and become covered with fungus, therefore, experts recommend using epoxy grout instead of epoxy grout for rooms with high humidity.

Also for grouting can be used furan mixtures, but due to their dark, almost black, color, they are almost never used in apartments, but they have found application in industrial premises.

No. 2. Cement grout: properties and applications

Even far from the most experienced builder will be able to prepare cement grout and apply it to tile joints, which is what lies main reason her popularity. IN composition of cement grouts includes Portland cement, colored pigments, as well as various plasticizers and other additives to impart specific qualities. When water or water-based latex is added, the grout powder turns into a very plastic material, reminiscent of putty. The latex plasticizer also allows you to change the color of the grout after drying to a more saturated side.

Depending on the type of tile joints, slightly different compositions:

A wide range of cement grouts are presented in the store, and they can be sold:

• in the form of a ready-to-use grout;
• in the form of a dry powder, which is pre-diluted with water.

Main advantage finished formulations- the ability to use them immediately after purchase and not waste time mixing the powder with water. They sell such compounds in plastic buckets, and after opening the lid, it is better to use the grout all at once, otherwise it will dry out.

Much more practical to use are dry powders. To get a grout, the composition must be filled with the amount of water or latex specified in the instructions, and if necessary, do not a large number of fugue, then you can cook it without problems - the rest of the powder in a dry room can be stored for a long time.

The main advantages of cement grouts:

• cheapness;
• ease of preparation and use;
• good strength;
• maintainability. Over time, small cracks necessarily appear in the seams, which are filled with dirt, and it is no longer possible. In this case, the old grout is removed with a spatula or, and the seams are rubbed again - such an update will be inexpensive.

Cons of cement grouts:

• insufficient resistance to moisture;
• low resistance to household chemicals.

In view of these shortcomings, in particularly humid places, it is still recommended to use epoxy grout, the main competitor of cement compositions.

You can proceed to grouting only after it is completely dry. A pre-prepared solution is applied with a spatula into the seams and carefully leveled and compacted. Surplus that has fallen on the tile can first be carefully removed with a spatula, and then with a damp cloth. There is nothing difficult in this process.

No. 3. Epoxy grouts: advantages and features

Part epoxy grout includes epoxy resins, modifying additives, filler (usually quartz sand of various fractions), and hardener. It is indispensable in those conditions that can become a real test for cement grout: baths, laboratories, and other places where high humidity acts on the tile and aggressive chemicals can get into it.

Advantages of epoxy grout:

Disadvantages of epoxy grout:

• difficulty in work, which is explained by a too viscous consistency, therefore, even for professionals, working with such compounds requires a decent amount of time and effort. Everything is complicated by the fact that if such a grout gets on the tile, it will be difficult to clean it. Today, for a more accurate and simple application of epoxy grout, special bags are used that resemble confectionery bags, with their help the composition is squeezed out exactly into the seam;
• high price.

No. 4. Tile grout color

The color of grout for tiles is no less important than its properties, because you should not guess with a shade, and you can ruin the impression of the most expensive and beautiful tiles. Part cement grout coloring pigments should already be included, although sometimes it is difficult to choose the necessary color, and then the craftsmen advise adding a little color to the white mixture, which can even be used as gouache. Choice of colors epoxy grout much more, so finding the right shade is not difficult. Moreover, epoxy grout can be transparent- it will be a great addition to mosaic tiles. The presence in the composition of shiny components in gold, silver or bronze can make the tile seam very original.

As for the issue of choosing the color of the grout, then there are several basic principles:

What to do if a couple of types of ceramic tiles of different colors are used in the decoration at once? You won’t need to choose a separate grout for each - it’s better to choose a single option that would be combined with all shades of tiles, or for one color of the tile it would be in tone, and for another - contrasting. For example, if tiles of dark chocolate and beige shades were used for wall cladding, then the grout can be light: it will fit both colors of the tile and combine different elements together. When combining white and black tiles, the grout can be either black or white.

If you have opted for white tiles, then either a snow-white grout is used with it, or a completely contrasting shade: all light gray and beige colors will look dirty. Practical Scandinavian interiors involve the use of dark gray grout with white tiles, especially where white grout can quickly turn yellow, and gray grout will remain in its original form for a very long time. In cases where the tile is decorated colorful ornament, the grout can be selected for any color that is used on the tile, and if the room is small, it is better to select the fugue for the lightest elements. If multi-colored mosaic tiles are chosen for wall decoration, then let the grout be better in a neutral color.

Another question - how much real color grout will match the expected, because often the final result is very different from the sample presented in the store or indicated on the package. If the final shade is critical, then you will have to go to the extra expense of purchasing a small package of grout to test it on an area that will be hidden behind furniture or appliances. You can judge the color after the grout has dried. In cases where the grout is already fully applied, but in the end its shade does not meet expectations, some craftsmen recommend carefully walking along the seams of the moisture-resistant desired color. In order not to stain the tile, you can stick it with masking tape.

No. 5. Tile grout manufacturers

To be sure of the quality of the grout, it is better to give preference to products from well-known and reputable manufacturers. Among the largest companies producing grout for tiles and represented on the domestic market, it is worth highlighting:

In conclusion

Even after you have decided which tile grout to choose and what shade it should be, do not be too lazy to carefully read the manufacturer's instructions on the packaging for what size of joints a particular composition is intended for and what additional properties it has. If the composition contains sand, then you will have to rub the seams of marble and glazed tiles very carefully so as not to scratch the surface.

The choice of grout is just as important as the choice of the tile itself. Its main task is to protect the base and ends of the tile from the damaging effects of moisture, as well as from dirt, dust and chips. But there is another key function - the perception of the interior and how easy it will be to clean the room largely depends on the color and texture of the seams. We tell you how to choose the best tile grout and which manufacturer should be preferred.

The best tile grouts

The most popular grouts in 2018 and 2019 are from the manufacturers Ceresit (inexpensive segment) and Mapei (slightly more expensive grout).

Other popular grout manufacturers (in order of popularity):

• Vetonite Deco;
• Litokol;
• Kiilto;
• Isomat.

Option 1. Cement grout

Cement grouts are cement-based compounds with the addition of pigments, plasticizers and other special additives.

Suitable for: sealing narrow and wide joints of floor tiles, on the walls and backsplash of the kitchen, hallway, for porcelain stoneware (!), for repairs with a limited budget, for the repair of summer cottages.

NOT suitable for: bathroom walls and floors, and glass tiles.

Available as: dry powder in a bag (diluted independently with water before work) or as a ready-made mixture in a plastic bucket. The use of ready-made mixtures is justified only if you are sure that you are using the entire volume at one time.

pros	Minuses
Simple application. Cement grouts do not harden quickly, so they allow you to slowly correct flaws during grouting. This is a big plus for beginners.	Less decorative look of the seams, a small selection of shades. Compared to epoxy and silicone formulations.
Versatility. Suitable for sealing both wide joints (5-6 mm) and narrow ones (up to 5 mm).	Dries slowly. This is both a plus and a minus at the same time.
The most affordable type of grout. Perhaps this is the biggest advantage of cement grouts.	Porosity. For this reason, the seams absorb a small amount of moisture, can become moldy and begin to crumble and crack over time.
Material familiar to all tilers. Unlike epoxy grout, which not all craftsmen work with.	Over time darkens by 1-2 tones. Also, the grout always darkens after treatment with a protective impregnation.
	Shrinks a little after drying.
	Less durable.
	Seams with cement grout destroy acid-based cleaners. Only alkaline cleaners should be used.

Tips for choosing cement grout:

• To seal the joints on the floor and walls of the kitchen and bathroom, it is necessary to use grouts with antiseptic properties;
• In order for the cement grout to last longer, it must be additionally treated with a protective impregnation (like Atlas-dolphin, Ceresit CT10, etc.) and it is advisable to do this at least 3 times;
• In Russia, the most popular cement grout is Ceresit CE40;
• To fill wide joints (more than 5 mm), use special cement grout with sand. Otherwise, the grout will quickly crack;
• If you mix cement fugue with latex additives, and not with water, then it will become more moisture resistant (you can wipe the tiles in the shower), durable and resistant to fading.

Option 2. Epoxy grouts

Epoxy grout is a two component mixture of hardener and pigmented epoxy resins. When mixed with each other, the components of the grout polymerize, so that the filling of the joints becomes super-strong, waterproof, resistant to mechanical and chemical stress.

Ceramic tile is a strong, durable and very attractive facing material. It is used to finish the floor in a house or apartment, decorate walls, lay out intricate patterns with tiles, trying to emphasize the overall style of the room. If repair work are carried out without the help of a pro, the result will largely depend on which grout for the tiles the owner of the future work of repair art has chosen.

The importance of choosing the right grout for joints

The importance is due not only to the aesthetic component of working with ceramics. Yes, the grouted surface looks complete, neat, but, in terms of utility, grout mixtures play several more roles:

• ceramic tiles are exposed to moisture daily, and the grout prevents the growth of fungi and bacteria in the gaps;
• the final coating increases the strength of the masonry tenfold;
• the selected tone of the mixture can make even a plain tile interesting, unusual, or vice versa, it will destroy all beauty.

In addition to these factors, the process itself is also important. A good solution is applied easily, it is plastic and does not cause inconvenience to the master. Some grout materials retain this property even after drying. The seams will not crack over time from drying out, which means that the lining will not lose its properties.

Tip: Do not use white grout on the floor. It quickly turns yellow, loses its appearance and turns more into an irritant than into the pride of the owners.

How much grouting will be required

When shopping at a hardware store before repairs, many newly minted plasterers stand at a loss at the grout shelves. And how much does it need? Everything can be calculated, taking into account:

• tile size: the smaller the details, the more mortar you need to buy for each square meter;
• how large the adhesive layer is: the voids here are definitely superfluous;
• seams in width (here everything depends not only on the pattern, but also on the idea for the project);
• if the quality of the masonry is slightly lame and some nuances need to be corrected, it is worth buying more grout.

To calculate a specific amount of dry matter, you can add the length of the tile to its width, then divide this amount by the same multiplied indicators. The result is multiplied by the thickness of the tile, then by the width of the seams and by 1.6. All dimensions are in millimeters. The final number is the amount of undiluted grout that will be required per square meter of work.

Tip: Practice shows that the composition should always be purchased with a margin of 7-10%. This is especially true for beginners in the repair art.

What are grout mixtures: types, differences, pros and cons

The most common are dry mixes. Manufacturers use cement with various additives as their basis, and they make grouts plastic, easy to use, water-repellent, etc. Powder can only be used after dilution (water, less often liquid latex), the proportions are always indicated on the packaging.

There are also synthetic types. They are immediately ready for use, usually nothing needs to be added, but there are also those that require mixing with a hardener, dye.

You need to prepare synthetic grout right before work, and the process itself should not be interrupted.

In any case, the action is approximately the same: the mass is introduced into the gaps between the tiles, solidifies, fastening the edges together. The result is a thick protective layer that does not allow moisture and air to destroy the integrity of the cladding.

Cement grouts

This type includes all trowelling masses, the basis of which is a cement-sand or cement-polymer mixture. The composition allows you to use this option for gaps of different depths and widths. Affordable price makes this type the most popular and widespread.

Resin grouts epoxy and furan

This option refers to two-component. Synthetic resin is combined with fine-grained colored sand, which not only additionally strengthens the seam, but also gives the desired color. After mixing the parts, the material becomes similar to chewing gum, and in its properties - to good plastic. Epoxy grouts are ideal for working out areas high humidity, are equally good for the kitchen and for the pool.

As for furan mixtures, they can only be used in production, it is rarely found on sale and exists only in black.

Silicone grouts

Another type of grout that is ideal for fine work. The silicone base does not allow moisture and air to pass through, fits well and does not collapse when exposed to most modern detergents(except for chlorine).

Latex grout

One of the expensive mixtures, which is usually not used in pure form. Latex grout is purchased either to dilute the cement base, or is applied to a finished, dried-out seam after shrinkage. Latex finish significantly adds wear resistance to cement grout, making it waterproof.

Grout options by tile color

The shade of grout is no less important than each of its properties. But how to choose a grout for a tile from a photograph and will the dried material meet expectations? For example, cement grout has a very faded color due to the properties of the base. Although many advise adding color when kneading, will the final shade be exactly as planned? In order to understand this, you need to be patient and apply a sample to an inconspicuous place. If you like the dried cement in color, continue to work, mixing the mixture with paint in an already familiar proportion.

Tip: You can tint the cement grout with both a purchased color scheme and gouache for drawing. If you don’t like dried cement, you can tint it with moisture-resistant paint using the thinnest brush, cotton swabs and masking tape.

For epoxy grout, color is not a problem. Any of the selected ones will be saturated and will never lose this property. For example, in modern design rooms today it is fashionable to use bronze and gold tile joints. If in dreams it is this type of floor or walls - epoxy grout will come to the rescue.

Gray tiles

This shade is very popular today. For grouting gray tiles, you should always take a gray mass, but 1-2 tones darker. This rule applies to both floors and walls. This technique allows you to make any room a little larger, and in life the grout will be much more practical and easy to clean.

Black tiles

With this tile you need to keep your eyes open. You should never buy a glossy tile, every drop of water or a fingerprint will be visible from afar, and stains from washing will become a dream at night. If black tiles are used on walls where there is never water, a deep black grout should be used. The finished work looks luxurious, but for wet rooms, as well as for the floor, the grout should be dark gray. It will be easier to care for, and the gray color of the mass is not afraid white plaque water.

colored tiles

For options with multi-colored ornaments, you can use the grout of one of the colors involved. However, if the room is not large in square meters, it is better to choose a grout that is 1-2 tones lighter, or use neutral, soft colors. Otherwise, the space will decrease even more, especially if colored tiles decorate all the walls. Grey colour grout is universal. He will emphasize the ornament, will not "eat" square meters and will be the most practical in care.

Beige and brown tiles

For beige and brown tiles, a grout that matches the tone, either a shade darker, or a shade lighter, is well suited. Do not use black grout, the room will look dirty. If you really want to, it is better to give preference to a dark gray, cement mass.

Mosaic

The rule for processing mosaic seams is different from the rule for simple colored tiles. In this case, it is necessary to select shades as close as possible to the color of the tile. The problem is the number of seams, if you use red grout with yellow tiles, the result will only be a constant headache due to the strongest contrast.

White tiles

What grout should I choose for white tiles? If we are talking about walls outside the kitchen and bathroom, then this is a unique case when snow-white grout works well and there will be no problems with it in the near future. In any other case, it is more correct and more practical to choose a light gray shade than white. In the bathroom, white grout will turn yellow as quickly as anywhere else.

Color range of grouts

ceresite

Excellent, wear-resistant grout. Ceresite is very popular, especially CE-40, with a moisture reflective property. The color palette is huge, only the lazy can not choose something from the presented colors. But, reviews say that the color on the package (except for neutral shades) may differ slightly from the actual one. Therefore, it is wise to try on a small, inconspicuous area.

Litokol

Probably, Litokol grouts have the largest palette of colors among ordinary, non-epoxy masses. But, unlike the previous brand, Litokol most accurately reflects the real shade on the package.

Atlas

Another popular hero of today's material is Atlas grout. A rich selection of colors that look gentle, very soft. The brand offers not only the usual grout, but also:

• epoxy;
• with a brilliant effect;
• for restoration.

In general, the reviews of this brand are very good, there are no complaints about the differences between the palette and the real color.

Kiilto

This brand has collected the largest number of positive reviews among all those listed above (non-epoxy grouts). It is good in literally everything: a rich palette, good, soft shades, the correct transfer of the final shade in the house presented on the package.

Two-component grout

If finances allow and there are familiar craftsmen working with epoxy grout, you should definitely choose it among others. Such a grout is suitable for any room, does not fade for decades, does not chip, does not crack. But, most importantly - a huge selection of colors, shades, effects (shine, sparkles, shimmering particles). Choosing epoxy grout, you can bring to life absolutely any interior idea.

Grout update

If, over time, a wall or floor suddenly becomes not as attractive as it was before, but grout crumbled, mold appeared or the color changed, so it's time to update the grout. The old layer of mastic is removed with a special expander (scraper), then the surface is carefully treated with an antifungal agent, dried and rubbed again.

Tip: To make it easier to work with a scraper, it is worth moistening the seams hot water. A hair dryer or vacuum cleaner will help get rid of the dust inside.

Epoxy grout is difficult to remove; in this case, you cannot do without a special solvent. In addition, ceramic tiles are very fragile and any wrong movement can lead to a crooked chip.

If you urgently need to update the color and get rid of the mold, special sprays that destroy the fungus and simple paint will come to the rescue (for simplicity, you can buy a paint marker).

Conclusion

We hope that the tips on how to choose grout colors for tiles came in handy in practice. Remember the simple rules.

1. For white glossy tiles, you should choose a grout that is a shade darker, but if such tiles are on the wall in a damp room, a snow-white color is acceptable.
2. Gray grout is universal and suitable for any tile.
3. If the choice fell on the grout in color, then it is chosen a tone lighter for the walls, but a tone darker for the floor.

Video review

Even a flawless tile installation will not look perfect if you do not pay enough attention to the tile seams at the final stage of finishing. The voids between the joints should not remain in their original form, so they are filled with a special material - grout (fugue). This does not allow moisture, debris and dust to get under the tile, which means that the durability of the lined surface increases significantly. In addition, if you know how to choose the right grout for tiles and use this knowledge in practice, you can easily mask laying defects and, in general, enhance the aesthetic effect of the lined surface. And in order to choose any product of the construction market, you need to learn more about it. Let's start with this.

Depending on the composition, grouts can be cement and epoxy.

Among the variety of grouts for tiles, there are two main types: cement and epoxy.

Silicone sealant is sometimes used as a grout, which is sold in special tubes or cartridges. However, the fugu should not be replaced by them in any case! This is a tool with a slightly different effect. It is used to isolate the cladding from other materials, for example, at the junction of tiled cladding and bathroom (sink, toilet bowl, etc.). Completely fill silicone sealant inter-tile seams are impractical.

Cement grouts - a classic of the genre

The simplest grouts, which, even without special experience from the tiler, practically guarantee an excellent result, are cement-based mixtures. In their composition: finely ground cement, plasticizers, various additives and pigments. When mixed with water or latex (water-based), these components turn into a plastic material similar to putty.

The consistency of cement grout is similar to elastic putty, so it is very easy to work with it.

According to the composition and purpose, cement grouts are:

• for narrow seams (up to 5 mm);
• for wide seams (more than 5 mm).

Grouts designed for joints up to 5 mm have standard composition(indicated above). For wider joints, cement grouts are used with an obligatory additional component - sand. The aggregate will prevent the cement composition from cracking, will "keep" it in a given shape. Moreover, the wider the seam, the larger the grains of sand should be and vice versa.

Cement grouts can be purchased in the form of:

• finished composition (in plastic buckets);
• dry powder (in paper bags or bags).

Ready formulations can be used immediately after purchase, without any preparatory phase. On the one hand, this is convenient, on the other hand, it is not very practical: after opening the container, the elastic mass does not “live” for long and will soon dry out, that is, it is advisable to use the entire volume at a time.

Ready-made cement grouts are sold in plastic buckets of various sizes.

Are you looking for bathroom tiles but can't decide? We will help you with advice and tell you about the design features in the article:.

Another, more popular type of cement grout, is in the form of a dry powder. Before starting work, the required amount should be mixed with water or latex to the required consistency. Dry mixes are convenient to buy with a small amount of work, since you can take the amount of powder you need from the bag, and remove the rest until better times. Even up to next year, the main thing is to store in a dry place, since cement grout is afraid of moisture.

Advantages of cement grouts:

• convenience and ease of use;
• universality;
• a wide selection of colors;
• good strength;
• small price.

Disadvantages:

• resistance to pollution;
• destruction under the action of household chemicals.

We would like to offer you a master class on fugue grouting from our German friends for viewing:

Epoxy grouts - durability "for centuries"

Cement grout can be chosen for almost any occasion. However, some conditions can be a severe test for cement compositions, significantly reducing their service life. Therefore, when laying tiles in swimming pools, baths, laboratories, kitchen aprons, countertops, that is, where the cladding is exposed to constant moisture, acids, household chemicals, it is best to use epoxy grout.

Epoxy grout for tiles is characterized by a viscous consistency. To fill the tile joints with it requires accuracy and a professional approach.

It will become easier to choose tiles for the kitchen by reading our practical advice in special material: .

The composition of any epoxy grout includes two components:

• epoxy resin with modifying additives and filler (quartz sand of various fractions);
• hardener.

In order to obtain a working mixture, it is necessary to mix these two components (they are contained separately in the purchased container). After thorough mixing, a fairly dense, but elastic mass is obtained. It is difficult to work with it because of the increased viscosity, therefore, even for professionals, filling the joints with “epoxy” is a long and tedious task. However, at the end of it, you will receive a “bonus”: the quality of the resulting seams (strength, bright color, frost resistance, etc.) will remain at the original level for 40-50 years. That is why many tilers believe that "epoxy" -.

Shiny components can be added to the epoxy grout, which enhance the decorative effect of the cladding.

Advantages of epoxy grouts:

• high strength;
• durability;
• resistance to pollution, fungal infections, mold;
• resistance to chemicals and cleaning agents;
• water resistance;
• high decorative properties.

Disadvantages:

• high price;
• difficulty at work.

We invite you to watch a video with an example of work with such a grout:

The tile is very durable, but if you do not take care of it, then all its beauty will fade. You will learn how to properly wash and clean the tiles in the bathroom on our website:.

Choose by "clothing" - color schemes

The choice of a particular grout most often (especially if the buyer is not a specialist) is not due physical characteristics, but appearance. And, first of all, color. Therefore, at this stage of the selection, you should dwell in more detail.

The composition of cement grout initially provides for the presence of pigments that color the fugue in any color: from white to black. Although this does not always help to choose a shade that blends perfectly with the tile. In this case, it is advisable to use dyes. To create a unique color, it will be enough to add a little color (gouache) to the white grout mixture.

The colors of the epoxy grout are set initially, thanks to the colored aggregate (quartz sand). "Epoxy" can even be transparent, which is especially appreciated when creating glass mosaic panels. A particularly interesting effect can be obtained when filling tile joints with grout with shiny components (gold, silver, bronze).

A rich palette of shades of epoxy grout makes it possible to choose the color that is most suitable for the surface of the tiled cladding or mosaic

Thinking about how to choose a grout for tiles by color, you should be guided by your own taste. If you are unlucky with this, and you can’t decide in any way, then choose a white fugue - this is the most win-win option. Unfortunately, it is only suitable for walls; on the floor, flawless white touches will become dirty in a couple of days. For the design of floor cladding, it is recommended to use a gray ("cement") fugue or any dark color that is in harmony with the shade of the tile.