Do-it-yourself snow blower: a worthy alternative to factory models. How to make a snow blower from a walk-behind tractor

With the onset of winter, snow begins to fall. For many owners of private plots, clearing snow is a big problem. When working with a shovel, you can spend a lot of effort and time, and the result will still not be ideal. To help people were created electric snow blowers (cm. ). However, their price is often too high for people. Therefore, the question arises: how to make a snow blower with an electric motor with your own hands?

Design and principle of operation of an electric snow blower

Compact household snow blowers There are also electric. They differ from each other only in the way they are powered: the first ones run on gasoline, the second ones, respectively, on electricity. Read about electric snow blowers.

The essence of the work of a snow blower is as follows: using a specially rotating device, collect snow, and then, using an outlet chute, forcefully push it in a given direction to the required distance.

Based on this, snow removal machines divided into single-stage and two-stage. The first ones use only the force that the auger creates by rotating at high speed to push out snow. The design of the latter includes a special rotor, which stands at the entrance of the outlet chute and, rotating, pushes out the snow.

This allows the auger to spin at a lower speed, which prevents rapid wear and frequent breakdowns when hit by stones or other hard objects.

An auger is a device that crushes snow and “throws” it inside the snow blower.. It is located in the front of the machine, at the bottom and is closed at the top and sides with a bucket body so that the snow is directed directly into the snow blower. The screw is usually made of metal.

It is a durable, monolithic device that looks like a drill rig or screw thread enlarged. Rotating around its axis, it grinds the snow and feeds it inside the snow blower.

If the rotation speed is high (as in single-stage types), then a solid object getting into the auger is likely to cause its breakdown. Therefore, in such cars it is covered with rubber on top (sometimes it consists entirely of rubber).

This feature allows when in contact with hard ground the snow blower can move around a little on its own. In two-stage machines, the auger rotates at a lower speed, since it is not the rotor that throws the snow over long distances.

Such snow blowers can not only clear fresh snow, but also cope with compacted and frozen snowdrifts. The surface of a metal screw can be either smooth or serrated.

In addition, the snow blower has a motor, an outlet chute, which regulates the direction and range of snow throwing, wheels (sometimes tracks are used), handles for moving the snow blower by a person and in the most complex models- control Panel.

More details about email. snow blower, watch the video below:

Step 2. Auger

The main working part of a snow blower is the auger. He consists of a drive shaft and “cutting” rings attached to it. The shaft is usually made from ¾ inch pipe. Its length should correspond to the length of the bucket. Trunnions are welded to its ends, which will later serve to install the shaft into bearings.

In the case of two-stage snow blowers, a metal plate (usually 12 cm by 27 cm) is attached to the center of the pipe. She transfers the snow into the discharge chute. On the sides of it, rings are attached to the pipe, which are usually made of a 10 mm thick conveyor belt.

They can also be cut from two-millimeter sheet steel.

Often they make four rings of a certain diameter. The diameter depends on the size of the bucket and shaft. The rings are sawn in half and bent into a spiral.

They are then welded to the shaft in the form of a continuous spiral. If the machine is auger-rotor, then to the sides from the central plate.

It turns out two solid spirals - to the right and left of the plate.
In two-stage electric snow blowers, the spiral must angle toward the center so that when the snow is raked, it falls onto the plate and then into the discharge chute.

Step 3. Ladle

To make the ladle itself, use roofing iron. It should cover the auger on three sides, but upper part will protrude slightly forward.

The side parts can be made of plywood with a thickness of ten millimeters. Self-aligning bearings are installed in the side parts (for example: sealed bearings 205). A shaft with a screw is built into them.
Bearings must be reliably protected from snow and water.

The distance from the edges of the auger spiral and inner surface the ladle should be approximately 2 cm. The auger should not cling to the ladle. A hole is cut in the top of the bucket for the outlet chute. To make it, you can use a piece of ordinary sewer pipe diameters 15 cm.

However, the diameter can be larger. The main thing is that it was larger than the width of the plate which throws snow. At the top, the pipe bends and sets the direction of snowfall.

Step 4. Frame

To make it easy to service or remove the engine, a special frame is made on which it will be installed. The base of the frame is U-shaped and made of metal corners.

Then metal strips are welded to it to mount the motor and the bucket with the auger. Holes are drilled in the frame to install the handle and wheels.

Step 5. Wheels and skis

In production models for moving a snow blower wheels are usually used, however in homemade version quite suitable skis. It should be made of metal and attached according to the principle of an ordinary sled, however, at a minimum distance from the frame.

If you use wheels, then the protectors should have maximum grip and frost resistance.

Step 6. Handles

Handles are being manufactured made of ½ inch pipes and bolted to the frame. They should be comfortable for a person to move the snow blower.

Step 7. Rotor

In two-stage snow blowers, the auger design can use not a plate, but improved rotor. It has the shape of four fastened rectangular plates with an axis in the middle. It is desirable that the plates have rims along the edges in order to better “pick up” the snow.

The diameter of the rotor must correspond to the size of the bucket and not hit it.

Step 8: Electric Motor

Can be used as a motor the simplest electric motors with a power of about 1 kW.
The engine must be insulated from snow and water. Otherwise, a short circuit will most likely occur.

The power cord must also be undamaged, and its length must provide the required distance between the power source and the snow blower.

Step 9. Connecting the motor and auger

The motor can be connected to the shaft in two ways: using a gearbox or belt feed. In the first case, the axis of rotation of the engine is located perpendicular to the shaft. Gearbox, connecting the motor axis and shaft , causes the auger to rotate in the desired direction.

This design is more reliable and efficient, but is usually not dismountable and difficult to manufacture. The second case involves a parallel arrangement of the engine axis and shaft. They are connected to each other by a transmission belt. This design makes it easy to remove and install the engine, adjust belt tension.

Below are approximate drawings of the frame and bucket. Sizes can be adjusted individually.

Features of a homemade electric snow blower

In the simplest snowblower with an electric motor, made by yourself, The following configuration is used:

• Electric motor.
• Bucket with auger and outlet chute.
• Frame with handles.
• Wire.

However, as mentioned above, the auger can be made according to different principles. The supporting mechanism can be wheels or skis.

Engine – removable or non-removable. Despite this, the equipment of all homemade snow blowers is very similar, since It is almost impossible to make additional equipment yourself.

Fuses in the hay blower

• Large solid objects getting into the auger is the main danger when using homemade snow blower. This entails not only breakage of the auger, but also jamming of the engine. In order to avoid engine breakdowns, special fuses are made.
• Use safety bolts or bushings. With their help, the finished screw is attached to the rotating shaft. If the permissible load is exceeded, they simply break, but the engine remains operational.
• The electric motor provides for a cable that will be exposed to the cold. Most regular cables are not designed to withstand extreme temperatures; they will freeze and perform poorly. For work in cold weather, wires of the types KG-KhL, PGVKV, SiHF-J, SiHF-O or their analogs are used.
• The width of the bucket is adjustable depending on how wide it will be work surface. Most standard buckets may not be suitable for clearing very narrow paths, so dimensions must be provided in advance.
• Single-stage snow blowers conveniently place the outlet chute on the top and side of the bucket so the snow has less distance to travel. In this case, the auger spiral should be inclined at a slight angle in the direction where the chute is located.

So, quite easy to do. At the same time, the costs will be small, and the operating efficiency will exceed all expectations. Using an electric snow blower is much cheaper and easier than using a gas blower, but it is limited by the length of the lead cable. Read how to make a gasoline snow blower with your own hands.

Having weighed all the pros and cons, we can say that for clearing snow from medium-sized areas, it is very convenient and at the same time cheap to have your own snow blower.

In winter, any owner of a summer house or private house is faced with the need to clear snow from the yard, paths, driveway to the house, and also the roof. Using special equipment, which many companies produce, this can be done easier and faster. But there is another option: a DIY snowblower. Anyone who is familiar with the operating principle of snow blowers and has certain technical skills can assemble the device themselves.

Snow removal machines are designed for mechanical removal of snow cover in the required area. Their functions include collecting snow mass and throwing it back to the collection point. The engine that powers the car can be electric or gasoline. And the snow removal equipment itself is divided into (with tracked or wheel drive), manually controlled, single-stage and two-stage.

To independently assemble such garden equipment, you can use a chainsaw engine, an electric motor, or, as well as various improvised materials that everyone probably has on the farm. Before you make a snow blower with your own hands, you should familiarize yourself with the types of such equipment and choose an acceptable option for yourself.

Electric snow blowers can clear small areas near your home, such as porches or narrow walkways. Such a unit will not be suitable for clearing large areas of snow cover. In addition, its operation is not effective if there is ice or significant snowdrifts. On the other hand, such equipment is quite compact, easy to operate and convenient to store.

Self-propelled snow removal machines are excellent at removing large amounts of snow from large areas. gasoline engine. Moving independently, these vehicles have excellent maneuverability and a long ejection range. The equipment is quite large in size, but does not require any physical effort during operation.

Before you make a manual snow blower with your own hands, you need to keep in mind that non-self-propelled models are designed for cleaning small areas of freshly fallen snow up to 25-30 cm thick. They are mainly used for daily cleaning of sidewalks, garden paths and flat roofs. Such devices are quite maneuverable, however, when removing a dense layer, it will be difficult to control the equipment, since you will have to push not only the device, but also the thickness of the snow in front of it.

Useful advice! When assembling a non-self-propelled snow blower for your home with your own hands, you should use the lightest possible parts, since the equipment will work due to human efforts.

How to make a snow blower with your own hands

Making a homemade snow blower for your home with your own hands is an excellent opportunity not to spend money on purchasing expensive models from leading manufacturers and at the same time avoid labor-intensive clearing of snow from an area with a shovel. In addition, technology self-made will be a source of pride for any owner country house or dachas.

Assembling a homemade snow blower will not be difficult if you have an idea of ​​the operating principle of such equipment and its structure. To clear snow from the surface of paths and the yard of your own home, it will be enough to assemble an auger or rotary model. These are simple machines and anyone can make them. Making a combined homemade snow blower with your own hands is somewhat more difficult, but you can do it if you want.

Before you make a snowblower with your own hands, you need to decide on the type of engine. When equipping equipment with an internal combustion engine, you should take into account that it will be a fairly powerful unit that can function on any surface of your site. However, the components and fuel for it are quite expensive. In addition, the disadvantages include the complex technical content of such equipment.

As for a do-it-yourself snowblower with an electric motor, in this case you can use any motor from relatively powerful electrical equipment. A motor from a trimmer or electric saw will do. The advantages of such technology include the availability of electricity, and the disadvantages are the short range of action. To cover the entire area, you will need an extension cord or street wiring with several outlets.

Useful advice! When assembling an electric snow blower with your own hands, you should take into account that the electric motor requires good waterproofing, since it is afraid of moisture.

You can find it online large number videos of homemade snow blowers, viewing of which will help you visually familiarize yourself with the manufacturing technology of various types of snow blowers.

Making a DIY snow blower from a chainsaw

The main advantages of a homemade chainsaw snow blower are:

• low cost of components (in addition, you can purchase a used chainsaw at a low price);
• high performance of the unit;
• the ability to manufacture basic components from available materials.

The disadvantage is that it is impossible to provide the device with self-propelled movement.

When making your own snow blower from a chainsaw as driving force use its motor. To adapt the engine from such equipment to a snow blower, it is necessary to disconnect it from the frame and slightly modernize it. The power of the motor will affect the main indicators of the snow blower: quality of clearing, ejection range and other parameters.

In addition to the engine, the design of the snow blower includes:

• auger body (bucket) - you can make it from roofing sheet metal;
• auger shaft - a pipe with a diameter of 20 mm (¾ inch) is suitable;
• screw surface of the auger - made of sheet iron, some use a conveyor belt;

• side parts - for their manufacture use 10 mm plywood or sheet steel;
• supporting structure (frame) - it is welded from a profile pipe (angle 50 x 50 mm);
• handle - made of pipe with a diameter of 15 mm (½ inch);
• shovel for feeding snow into the outlet chute - metal plate 120 x 270 mm.

In your work, you can use the drawings of a snow blower made from a chainsaw with your own hands, posted by users on the Internet.

Forming an auger for a snow blower with your own hands: video of step-by-step production

The main working element of a snow blower is the auger. It consists of cutting rings-blades attached to the drive shaft. A pipe about 80 cm long is used as a shaft. In the center of the pipe you need to cut through hole, into which a shovel will subsequently be inserted to supply snow. When the shaft (pipe) rotates, the blade will throw away the snow.

Before you make an auger for a snow blower with your own hands, you need to develop a diagram or use ready-made drawings according to which the rings will be cut. The auger blades are made of sheet steel. To do this, 4 disks are cut out of metal, cut and pulled out in the shape of a coil. After this, the finished parts of the spiral are welded to the pipe: equally on each side.

Next, having determined the center of the shaft, two blades are welded parallel to each other, which will throw out snow. Metal spacers are welded along the edges of the pipe to fix the screw structure. The spiral blades are attached to the spacers on one side and to the central blades on the other.

Useful advice! When making an auger for a snowblower from a chainsaw with your own hands, it is very important that the turns of the metal spiral are located at the same distance from the center and towards it. Otherwise, the equipment will vibrate strongly.

When manufacturing the auger body, its length is left equal to the length of the shaft, taking into account the segment for the drive. Trunnions are welded to the edges of the shaft, with the help of which it is mounted on bearings. They are used in a closed design to avoid the ingress of snow and water. You can get a visual idea of ​​how to make an auger by watching a video of a homemade snow blower: in this case, assembling a snow blower with your own hands will be much easier.

DIY snowplow assembly using a chainsaw

The manufacture of the auger body begins with the sidewalls. To do this, two circles are cut out of metal, the diameter of which exceeds the diameter of the screw assembly by 6-7 cm. A sheet of metal of the appropriate size bent into a semicircle is welded to the sidewalls. In the center of the side parts there are holes into which the screw mechanism is inserted. The bearings are welded to the sidewalls from the outside. In the section of the pipe under the drive, a driven sprocket is fixed by welding (a sprocket, for example, from a motorcycle will do).

Next, proceed to the installation of snow removal. It can be made from a pipe with a diameter of 100 mm and a length of about 1 m. In order to install the pipe, a hole of the appropriate diameter is made in the auger body. It should be located on the back wall of the case. The snow thrower pipe is inserted into this hole, secured with bolts, and a box is installed on top.

The frame for a snow blower is made by welding into a frame profile pipes. Planks for mounting the engine are attached to the transverse corners of the frame. It should be noted that the power unit must move freely along the frame and be able to be locked in the desired position. A handle is welded to the frame with the throttle control of the engine of homemade snow removal equipment connected to it.

Homemade with a longitudinal engine

Depending on the type of terrain, the snow blower frame is equipped with wheels or skids. For smooth areas you can use wheels, for bumpy and uneven surfaces - runners. The base for the runners is made of bars, to which plastic linings are attached for good gliding.

Do-it-yourself snow blower: advantages of an electric model

Electric snow blowers have some advantages over models equipped with internal combustion engines. These include:

• relatively quiet operation;
• due to the absence of filters, fuel, and spark plugs in the engine, such units are easy to maintain and maintain;
• no need to refuel;
• light weight of the equipment;
• do not emit smoke during operation;
• low costs and excellent efficiency.

However, electric snow blowers also have disadvantages, including:

• low engine power (up to 2 kW);
• constant monitoring of the condition of the electrical cable for damage;
• small radius of action (as far as the carrying length allows);
• the need to apply force to move the device.

Useful advice! Before making a snow blower with an electric motor, select wires whose insulation will withstand the load and will not crack when exposed to frost.

Assembling an electric snow blower with your own hands

The technology for making electric snow removal equipment with your own hands is in many ways similar to the device gasoline models, however, the driving force of such equipment is an electric motor. This could be a simple motor from an electric saw, grinder or other power tool. When assembling it yourself, use the drawings of an electric snow blower as a guide. Videos on the topic will help you avoid mistakes during installation.

The designs of the auger assembly and housing can be assembled, as in the example of a snow blower based on a chainsaw. All that remains is to connect the electric motor. This can be done in different ways: through a gearbox or belt drive. In the first option, the axis of rotation of the motor is located perpendicular to the pipe (shaft). The auger rotates thanks to a gearbox that connects the shaft and the axis of the electric motor.

The second option assumes that the axis of the engine and the auger shaft are placed parallel and connected by a belt. This scheme allows you to quickly remove and mount the electric motor by adjusting the tension of the belt drive. For work, you can use ready-made drawings that can be adjusted to your dimensions.

Related article:

Options for making a snow blower with your own hands. Characteristics various models. Self-installation instructions.

When starting self-assembly, you should follow some recommendations:

• To avoid engine failure as a result of stones and other objects getting into the auger, it is necessary to use safety bushings and bolts. Thanks to this, if the load is exceeded, the bolts will fail, and the engine will not jam;
• the width of the auger body is selected taking into account the size of the surface requiring cleaning;
• When installing a single-stage snow blower, the outlet chute should be located on the top and side of the body, which will allow the thrown snow to travel a shorter distance.

DIY snow blower layout from a trimmer

Not all models of electric scythes are suitable for assembling a homemade snow blower from a trimmer. If the trimmer has a curved rod with rotation transmitted by a steel cable, then such a tool is low-power and is not suitable for making a snow blower. One of the requirements is that the trimmer has a straight rod and transmits rotation from the motor to the reel through a gearbox and a rigid shaft. Such devices are more powerful and can be used for snow blowers.

Before you make your own snowblower from a trimmer, you need to check that you have everything the necessary tool. You will need welding machine, grinder, drill. The sequence of work is as follows:

• the body can be made from a small metal barrel, which must be cut approximately 15 cm from the bottom. A hole is made in the center of the bottom of the barrel into which the protruding element of the gearbox will be placed. Holes are drilled along the edges - at a distance coinciding with the fastenings of the shield on the gearbox itself;
• a square hole measuring 10 x 10 cm is made on the side of the barrel to throw away the snow mass;

• the third part of the open body must be covered with a sheet of tin so that the hole for the snow to come out is strictly in the center;
• To make a rotor you will need four blades. It is necessary to cut four rectangular plates measuring 25 x 10 cm from sheet metal. These blanks must be cut so that the shape of the blade is obtained. After this, they are welded to the trimmer disc;
• a snow drain can be made from the remaining parts from a metal barrel. To do this, a rectangular strip of 15 x 30 cm is cut out. This blank must be bent and side parts 10 cm high must be welded to it. Thanks to them, the snow will be directed in a certain direction when thrown;
• making a spatula. It is made from sheet metal 30 x 40 cm. The edges of the plate are folded so that the sides are about 2 cm high;
• The snow drain is welded to the body in the place where the ejection hole is located. The blade is fixed from below. The gearbox is secured with bolts. The rotor is installed like a trimmer blade.

A video of a snow blower made from a trimmer with your own hands will help you get acquainted with the assembly process in more detail.

DIY rotary snow blower

The main components of a homemade do-it-yourself rotary snow blower are:

• internal combustion engine equipped with a muffler;
• fuel tank;
• throttle control cable.

To manufacture all elements of the snow blower, you will need to have lathe. It is used to adjust all the parts of the mechanism to the right size. If such equipment is not available, the manufacture of a rotor can be ordered in a workshop according to the sketches you have.

Activities for constructing a rotary snow blower can be divided into several stages:

• assembly of the screw mechanism;
• rotor manufacturing;
• housing installation;
• frame device.

Having made each unit separately, they are assembled into one structure. To ensure that the snow blower has a presentable appearance, it is painted after assembly.

Manufacturing of components for a rotary snow blower

The manufacturing technology of the auger mechanism is similar to the design of an auger for a snow blower made from a chainsaw. A dense (10 mm thick) conveyor belt can be used as screw blades. The dimensions of the screw assembly must correspond to the dimensions in the drawings.

The rotor is made of sheet metal 2.5-3 mm thick. Using a compass, you need to draw a circle of the required diameter on a sheet of paper and cut it out with a grinder. To make the blades, a blank part from an electric motor is taken as a basis. Blades are formed from sheet metal. They are welded at equidistant distances from each other to a steel disk connected to the hub. The number of blades must be at least four.

The frame for the snow blower is assembled by welding sections of metal angle into the frame according to the existing diagram. All components of the frame are attached using bolted connections.

Useful advice! Rotary snow blowers should use more powerful bearings that can withstand the beating of the rotor mechanism.

When all the components of the snow blower are ready, they begin to assemble them into a single unit. The auger shaft is mounted on the rotor mechanism. Then this entire mechanism is fixed to the frame using bolts and a pressure ring. The rotor is attached to the frame using a special bracket. A plastic pipe with a diameter of 100 mm is used as a snow thrower for a homemade rotary snow blower.

Advantages of combined models of snow blowers

Compared to auger units, combined snow removal machines are more efficient in operation, since the load is distributed between both the auger and the rotor. They have sufficient power and can cope with clearing an area of ​​impressive volumes of snow. Among the advantages of homemade rotary snow blowers are:

• excellent maneuverability and high performance technology;
• depending on the engine used, the snow throw range can reach 12 m;
• the ability to adjust the width of the snow cover;
• the light weight of the machine (up to 20 kg) makes it possible to cope with cleaning the area around the house (including for women);

• the ability to repair a snow blower yourself;
• low cost of materials for the manufacture of all components of the unit.

Making your own rotary snow blower is quite a complex and painstaking task. If you are poorly versed in technology, do not have certain skills, or do not have the necessary tools, then buy factory model While finances do not allow, you can make your own snow shovel.

Making a snow blower with your own hands: videos about self-assembly

For many it may seem self-assembly snow plows are very challenging task. Justifying the saying “it’s better to see once than to hear a hundred times,” many craftsmen post thematic videos on the Internet. The videos contain the main points of assembling homemade snow blowers, as well as information about the components used to construct them.

On the Internet you can find a huge number of video instructions, which present various options homemade snow removal equipment: based on a chainsaw engine, as well as an electric motor. The stories describe the method of manufacturing a screw mechanism and provide possible materials for their manufacture.

On the Internet you can find many ready-made drawings and assembly diagrams for snow blowers of various models. You can use them to make your own model, and all dimensions in the drawings can be adjusted to apply to an individual snow blower.

Getting acquainted with the video materials will give useful information about how to properly prepare for work and set up a snow blower. The DIY snow blower repair video contains visual information about common faults and breakdowns, how to fix them, as well as the correct maintenance devices.

Having studied in detail the proposed drawings, diagrams, step by step instructions and video materials, everyone can try their hand at making a homemade snow blower. After all, everyone in their garage or workshop has an old lawn mower, chainsaw or other tool that can be used to adapt it to a snowblower. And for those who doubt their capabilities, it is better to purchase a factory model.

A snow blower or snowblower is a machine designed to remove snow. Structurally, a snow blower is a machine with a working screw (augers) that rotates and moves snow in a given direction. Models of snow blowers can be divided into two types: self-propelled wheeled or tracked and non-self-propelled snow throwers. Non-self-propelled snow blowers are single-stage machines; snow is ejected due to the rotation of the auger, and therefore the ejection range is small. During cleaning, the snow blower for the dacha has to be pushed forward, so it is difficult for compacted snow to move. Self-propelled snow blowers - used for more complex snow removal jobs. These are two-stage machines, the first stage is a metal toothed auger, which easily breaks the crust, and the second is an impeller, which increases the ejection range and speeds up the cleaning process. Such machines can cope with compacted snow and snowdrifts. For greater maneuverability, self-propelled snow blowers are equipped with tracks - tracked snow blowers, which improve traction and allow you to work effectively on slopes. You can also buy an electric snow blower with delivery throughout Russia without leaving your home in the online store for snow removal equipment website

The easiest to use and care for are electric snow blowers. Such products are designed for removing snow from garden paths, local area and small areas. They weigh a little (up to 40 kg) and are small in size, which greatly simplifies the transportation and storage of such equipment, and have a low price. As a rule, they are equipped with electric motors up to 2 kilowatts. Their electric motors only provide rotation of the auger. The only disadvantage of such machines is that their range of action is limited by the length of the electrical wire. If this doesn't suit you, then you can buy an electric snow blower with a battery.

Electric snow blower kit.

All snow blowers are equipped taking into account operating conditions during the cold season. The design of such models may include:

• plastic blades for grinding freshly fallen or loose snow;
• metal or plastic casing;
• rotary pipe with control handle;
• a headlight for clearing terrain in the dark or in poor visibility conditions;
• bucket guide skids.

Advantages of electric snow blowers.

The advantages of snow blowers with an electric motor include the following:

• Minimum price;
• insignificant energy consumption;
• low level noise and vibrations;
• lack of complex maintenance and periodic refueling;
• long operating time;
• unpretentiousness with starting at negative temperatures;

As for the prices of electric snow blowers, they are much cheaper than gasoline snow blowers.

Features of ownership.

Electric models are inferior to their gasoline-powered counterparts, but they are ideal for small-scale use and short-term use. Such devices are lightweight and compact, so they have excellent maneuverability and cause less hassle for the user. You can easily use them to treat hard-to-reach places and place them in the garage.

Electric snow blowers can be recommended for everyday life and simple semi-professional work: clearing areas near shops, parking lots, office buildings. Please note that the length of the network cable will limit your movement. But you won’t have to spend money on fuel, carry out regular maintenance and replace consumables.

Such devices are completely safe for environment, do not pollute it with harmful exhausts and do not harm the health of the operator. The engine operates from the mains and drives all mechanisms. For full working condition and long service life, we advise you to connect only to proven 220V sockets where there are no voltage problems.

To increase the service life of the unit, do not forget to clean it after each use so that moisture does not get on the motor and other parts, otherwise it will lead to breakdown. During long-term use, take short breaks so that the engine does not overheat.

We were planning to buy an electric snow blower.

• Be sure to inspect the equipment before purchasing. Find out from the seller what is included in the standard package.
• Choose only trusted stores that can provide certificates and a quality guarantee.
• Avoid purchasing little-known brands - they quickly break down and it is difficult to get consumables for them.

Shop Cheaptool is an official dealer, so you can always buy from us the best technology at affordable prices. In Moscow Our service center is located where fast and high-quality maintenance is carried out.