Ways to imitate brickwork with your own hands

There are various options for imitation of brickwork with your own hands. They allow you to create a surface that will completely repeat the brick coating. This makes it possible to bring exceptional design ideas to life, creating an interior that will be filled with beauty and comfort.

Do-it-yourself imitation of a brick wall is performed in various ways. Some of them require the necessary skills, others are almost ready-made options. Each method is suitable for a specific case.

Ready types

Currently, there are those that completely repeat the texture of the brick. The advantage of such products is the low cost and ease of installation, which varies depending on the type of product. Select the following options:

All options have their advantages and disadvantages, but there are ways to make an imitation of brickwork - exclusively with your own hands.

Application of corrugated board

The use of corrugated cardboard sheets is a rather peculiar way that makes it possible to create a decorative surface, spending a minimum of materials for this. The work requires the following components:

Cardboard directly. You can use boxes for household appliances. The main thing is that their density should not be low.
High-quality paper napkins (thick, not torn).
PVA. To work, you need a large amount of glue.
Handicraft gun (refillable with hot glue).
Stationery knife, ruler and pencil.
Paint and varnish. For the final stage of finishing.

Materials required for the manufacture of corrugated cardboard brick inserts

Advice! Thin cardboard is not the best solution. It will not allow you to create the necessary texture. If it is not possible to use thicker material, then you can go for some trick. It lies in the fact that the fragments are glued together to create the necessary thickness.

To imitate corrugated brickwork, it is better to use a dense material

The technology consists in a sequence of actions:

Thus, it is possible to form a decorative brick wall with your own hands, which does not require large financial costs.

Finished corrugated board masonry

Using a stencil and pattern on plaster

This is a simple option that requires only the utmost care. The work is as follows:

A layer of plaster is applied to the surface. The thickness should be more than 4-5 mm, otherwise an expressive texture will not work.
Next, take the stencil. It can be rubber or plastic.
It is well moistened with water so that the main side does not stick to the wet solution.
The stencil is applied to the surface and pressed. It is necessary to remove it from the wall carefully, because with sharp movements you can remove part of the mixture.
The procedure is repeated. It is important to consider that the horizontal lines must match. If this is not followed, then fragmentary sections are obtained, unrelated to each other.
At the end, the imitation brickwork is well primed and waxed. The seams are embroidered. The surface is painted with acrylic paints.

On a note! To create a more interesting effect, color is added directly to the plaster. Then it is possible to create a play of shades, because the joints are painted in other options. Do not forget that if you paint the wall directly, then after drying the shade will become a little darker.

Do-it-yourself brick wall from fresh plaster can be obtained without using a stencil. The technology is:

Lines are drawn on the surface that indicate the seams of the brickwork. This is done a little randomly to achieve more naturalness.
With the help of a narrow scraper, the plaster is removed. The joints are immediately rubbed with a dry brush. This will form a relief, as well as slightly smooth out the bricks.
The finished wall is primed and painted.

These methods allow you to decorate only a newly made layer of plaster. If, after applying the plaster, some time has passed, and it has had time to dry, then creating a brick wall using the methods described above will not work.

Bricks on putty

This option is used when the idea of creating a brick wall came after some time, after plastering. In this case, putty is used for its implementation, which is pre-painted in the desired color.

Wall "under the brick" of putty

The general procedure is as follows:

The wall is well cleaned of dirt and dust. Degrease if necessary. Apply a layer of primer.
Marking is done on the surface. It should repeat horizontal and vertical seams so that an imitation of brickwork is obtained.
The joints are painted over with the chosen color and left to dry completely.
Next, masking tape is glued. Its strips should run along the painted seam lines. This is done as follows: first, they paste over the horizontal lines, and then the vertical ones (they should go to the previous ones).

Marking with masking tape for brickwork

A thin layer of putty is applied to the surface. The necessary texture is immediately formed, so the layer becomes uneven. You can use additional tools to help create relief.
The mixture is left for a while, it should seize. Now take off the tape. This is done very quickly, because the segments are fastened together. The putty is left to dry completely.

The layer imitating a brick wall is additionally polished, creating an original texture.

Thus, all work is done exclusively by hand. It is possible to form an excellent decorative surface, which will be the highlight of the interior. But you need to read that the question of how to make an imitation of brickwork is not only a technical side. It is much more important to correctly fit it into the decor of the room, so that there is no excessive heaviness, ill-conceivedness.