Silencers for rectangular ducts, length 500. Silencers for rectangular ducts. Silencers for fans in ventilation ducts
Buy Buy in one click Find out the price of a product
Price from 1 800 rubles. (depending on silencer size and length)
The Mirovent company offers equipment that provides soundproofing of ventilation systems. Among the widely used models are silencers for rectangular ducts. These devices are distinguished by the fact that between their body and the internal channel, which are made of galvanized style, there is a layer of insulation of 100 mm. Mineral wool or ultra-thin glass fiber is used here as a sound-absorbing substance.
These devices significantly reduce the level of aerodynamic sounds generated by fans and air conditioners. Such silencers are installed on the air ducts of the flow and exhaust ventilation systems.
Operating conditions
It should be noted that the flow in rectangular ducts is distributed rather unevenly. Due to the appearance of turbulent zones inside the pipe, additional noise arises. This places special demands on the efficiency of equipment designed to reduce it.
Sound attenuators for rectangular ducts are designed for transferring air and chemically passive media. The devices must meet the following conditions:
- maximum temperature - +800 °С;
- relative humidity - up to 60%;
- climatic compliance - category U;
- accommodation category - 3.
In order to reduce the noise produced by the fans as much as possible, when installing sound attenuators for rectangular ducts, it is recommended to provide a straight section about a meter long in front of them.
Mirovent offers equipment at the best prices. We work directly with the manufacturers of these products, so the quality of each product is guaranteed!
Name |
Options |
Material |
Noise suppressor rectangular GTP 1-1 on fl. from a tire |
100x200/300x400/980 |
|
Noise suppressor rectangular GTP 1-2 on fl. from a tire |
200x300/400x500/980 |
|
Noise suppressor rectangular GTP 1-3 on fl. from a tire |
200x400/400x600/980 |
|
Noise suppressor rectangular GTP 1-4 on fl. from a tire |
300x400/500x600/980 |
|
Noise suppressor rectangular GTP 1-5 on fl. from a tire |
400x400/600x600/980 |
|
Noise suppressor rectangular GTP 2-1 on fl. from a tire |
100x200/300x400/480 |
|
Noise suppressor rectangular GTP 2-2 on fl. from a tire |
200x300/400x500/480 |
|
Noise suppressor rectangular GTP 2-3 on fl. from a tire |
200x400/400x600/480 |
|
Noise suppressor rectangular GTP 2-4 on fl. from a tire |
300x400/500x600/480 |
|
Noise suppressor rectangular GTP 2-5 on fl. from a tire |
400x400/600x600/480 |
|
Rectangular silencer GTP1-1 on angle flanges |
100x200/300x400/980 |
|
Rectangular silencer GTP1-2 on flanges made of angle |
200x300/400x500/980 |
|
Rectangular silencer GTP1-3 on flanges made of angle |
200x400/400x600/980 |
|
Rectangular silencer GTP1-4 on flanges from a corner |
300x400/500x600/980 |
|
Rectangular silencer GTP1-5 on flanges from a corner |
400x400/600x600/980 |
|
Rectangular silencer GTP2-1 on flanges made of angle |
100x200/300x400/480 |
|
Rectangular silencer GTP2-2 on angle flanges |
200x300/400x500/480 |
|
Rectangular silencer GTP2-3 on flanges made of angle |
200x400/400x600/480 |
|
Rectangular silencer GTP2-4 on flanges from a corner |
300x400/500x600/480 |
|
Rectangular silencer GTP2-5 on flanges made of angle |
400x400/600x600/480 |
Attention!
Our company supplies products from several manufacturing plants with a similar range. The manufacturing plant reserves the right to make changes in the design and changes in the lineup of the supplied equipment. If necessary, you can ask our managers for more detailed information on a specific model.
Round silencer
Round silencers are designed to reduce aerodynamic noise in air ducts round section. Silencers are installed regardless of the direction of air movement.
The silencer body is made of galvanized steel. Inside the case there is a layer of sound-absorbing mineral fiber material.
|
Model | Dimensions, mm | Weight, kg | ||||||||||
Od | OD | L | 63 | 125 | 250 | 500 | 1000 | 2000 | 4000 | 8000 | ||
100 | 98 | 200 | 900 | 5,0 | 4 | 7 | 13 | 26 | 32 | 35 | 36 | 27 |
125 | 123 | 225 | 900 | 6,0 | 4 | 7 | 13 | 28 | 35 | 38 | 34 | 26 |
160 | 158 | 280 | 900 | 7,7 | 1 | 5 | 13 | 24 | 36 | 38 | 30 | 25 |
200 | 198 | 300 | 900 | 9,5 | 4 | 6 | 8 | 20 | 30 | 32 | 28 | 24 |
250 | 248 | 355 | 900 | 11,7 | 4 | 7 | 8 | 19 | 33 | 33 | 25 | 21 |
315 | 313 | 450 | 900 | 14,8 | 1 | 10 | 13 | 26 | 32 | 23 | 21 | 19 |
Silencer rectangular plate
Lamellar silencers are designed to reduce aerodynamic noise in rectangular air ducts. Silencers are installed regardless of the direction of air movement. To achieve maximum noise reduction efficiency, it is recommended to provide a straight section of at least 1 m in front of the silencer.
The silencer body is made of galvanized steel. Sound-absorbing mineral fiber plates are installed inside the case.
|
|
Model | Dimensions, mm | Number of plates | Weight, kg | Noise reduction (dB) at mid frequencies (Hz) | ||||||||||
A | B | L | E | 63 | 125 | 250 | 500 | 1000 | 2000 | 4000 | 8000 | |||
300x150 | 300 | 150 | 1000 | 100 | 2 | 7,5 | 4 | 4 | 6 | 14 | 21 | 29 | 22 | 23 |
400x200 | 400 | 200 | 1000 | 100 | 2 | 10,0 | 4 | 4 | 6 | 14 | 21 | 29 | 22 | 23 |
500x250 | 500 | 250 | 1000 | 100 | 3 | 14,5 | 4 | 4 | 6 | 14 | 21 | 29 | 22 | 23 |
500x300 | 500 | 300 | 1000 | 100 | 3 | 16,5 | 4 | 4 | 6 | 14 | 21 | 29 | 22 | 23 |
600x300 | 600 | 300 | 1000 | 100 | 3 | 18,0 | 4 | 4 | 6 | 14 | 21 | 29 | 22 | 23 |
600x350 | 600 | 350 | 1000 | 100 | 3 | 19,5 | 4 | 4 | 6 | 14 | 21 | 29 | 22 | 23 |
700x400 | 700 | 400 | 1000 | 100 | 4 | 25,5 | 4 | 4 | 6 | 14 | 21 | 29 | 22 | 23 |
800x500 | 800 | 500 | 1000 | 100 | 4 | 31,0 | 4 | 4 | 6 | 14 | 21 | 29 | 22 | 23 |
1000x500 | 1000 | 500 | 1000 | 100 | 5 | 37,0 | 4 | 4 | 6 | 14 | 21 | 29 | 22 | 23 |
Silencer for ventilation can be installed in various types depending on the cross-section of the duct and operational requirements for noise characteristics in the system.
Type/parameter |
Diameter, mm | Length, mm | Height, mm | Width, mm | Compound | Efficiency | Material | Price |
Rectangular | - | 600...900 | 200...500 | 400...1000 | Flanged | high | high | |
Round | 100...400 | 600...900 | - | - | Nipple | high | Galvanized steel, sound-absorbing material | Medium |
Flexible | 100...400 | 1000 | - | - | Nipple | Medium | Aluminum foil, mineral wool, metal cord | Low |
Compact (round in a rectangular case) |
100...630 | 900 | - | - | Nipple | high | Galvanized steel, sound-absorbing material | high |
semi-rigid | 100...315 | 600...2000 | - | - | Nipple | high | Aluminum, sound-absorbing material | high |
Angular | 100...630 | - | - | - | Nipple | high | Galvanized steel, mineral wool | high |
Consider ventilation silencers in more detail.
Rectangular
Rectangular silencer for ventilation is a box made of sheet metal divided along the air flow by plates covered with soundproofing material. Used for soundproofing fiberglass or mineral wool.
Basically, rectangular ventilation silencers are used for installation in air ducts through which a large volume of air passes. The gap between the cells varies from 75 to 300 mm, while with a decrease in the cells, noise decreases, but pressure losses increase. To reduce pressure losses resulting from friction, the sound-absorbing material is coated with an anti-abrasion compound or a thin layer of plastic. A variation of the rectangular ventilation silencer is the roof ventilation silencer. When choosing a rectangular sound attenuator for ventilation, it is necessary to take into account its "clear area" through which air passes, and not the landing (connected) size of the air duct.
Round
The round silencer for ventilation consists of round pipes, one of which is inserted into the other. Outer pipe round sound attenuator for ventilation must be smooth, and the inner perforated. The gap between these pipes is filled with soundproofing material. The dimensions of the inner pipe correspond to the dimensions of the air duct into which the round silencer for ventilation is mounted.
Round silencers are used for ventilation for installation in a system with air ducts up to 500 mm in diameter. For a city apartment, it is necessary to install a full-fledged supply and exhaust ventilation, with a silencer. Round silencers for ventilation can be elements of both supply and exhaust systems. Most often, round silencers for ventilation are installed between the fan and the main air duct. If transit air ducts cross a room with a high noise level, then a round silencer for ventilation is mounted on the site ventilation system behind this room. To prevent the spread of noise through the air ducts from room to room and when increased requirements to the sound insulation of individual rooms, it is advisable to install them directly in front of the air distributor or immediately behind the grille of the exhaust ventilation system. When installing air intakes in supply system near window openings, it is necessary to install a round ventilation silencer immediately behind the air inlet damper to reduce the noise coming out of the air intake grille.
Flexible
Flexible silencer for ventilation are mounted instead of round silencers, if the installation space is limited. Flexible silencers for ventilation are made of two-layer aluminum foil with reinforced cord. Between layers of foil layer of soundproofing material.
The length of the flexible silencer for ventilation is 1 meter. Great replacement for a round hard muffler!
How to buy
Want to buy noise suppressor for ventilation at home, office or cottage? Doubt your choice? We will be happy to advise you, select the right model!
Silencers for ventilation our online store sells not only in Moscow and areas, but throughout Russia.
Silencers
Silencers for ventilation systems
In ventilation systems, various ventilation equipment is installed, during the passage of which the air flow forms aerodynamic noise and vibrations, which spreads far beyond the air ducts.
Reducing the noise level during ventilation is achieved by installing such devices as silencers, and their use allows not only to ensure compliance with sanitary standards in production, but also to increase the period of trouble-free operation of ventilation equipment.
Several types of sound attenuators for rectangular and round air ducts are manufactured at the factory of Ventilation Factory GalVent, while you can order both standard size silencers from the product catalog, and silencers of any diameter/section with the required length. Silencers of non-standard sizes will be calculated by the company's designer, after which the sales manager will agree on the final cost of the silencers.
Silencers for fans in ventilation ducts
Fans are the main source of noise in ventilation systems, and most often silencers are installed immediately after the fan before entering the main air duct. Also, silencers can be installed after the wall of a room with a high level of noise in case the ventilation ducts cross it.
It should be noted that when installing an exhaust ventilation system, to reduce noise not only in the premises, but also outside, two silencers can be installed before and after the fan.
The number of silencers in the ventilation system directly depends on its design and the complexity of the layout of the ventilation ducts. Dozens of sound attenuators can be installed in one ventilation system, since to achieve the maximum effect, it will be necessary to install a sound attenuator after each ventilation element that creates noise and vibrations.
Types of silencers for air ducts
Silencers are divided into roof and channel, while duct silencers They are classified according to their cross-section into round and rectangular.
Round silencers include the tubular GTK and Eurostandard series, which are used in systems with round spirally wound and straight-seam air ducts. Efficiency tubular silencers confirmed when working in systems with a cross section of up to 500 mm, installed mainly in rooms for domestic needs.
To rectangular silencers include lamellar silencers of the GP and Eurostandard series, as well as GTP silencers. Lamellar silencers are most often used in industrial premises or for industrial needs, where the installation of ventilation ducts with a large cross section is required. In lamellar silencers, the sound-absorbing material is evenly distributed over the section of the silencer, which makes it possible to more effectively reduce the noise level.
Price list for silencers
To buy a silencer for a ventilation system, it is enough to send an application for the selection of a silencer, and the company's specialists will calculate the parameters of the silencer. As a result, you will receive the parameters of the desired silencer, which will most effectively reduce the noise level.