How to cut a hole in the tire. Crafts from tires: flower beds, flower beds, figures, garden furniture. Several workshops on making crafts from old tires

It is always nice to make something useful out of a junk thing, and if the craft is also beautiful, the pleasure is double. One example is tire crafts. They make decorations for a country or garden plot, various flowerpots and flower girls, build children's attractions and even make country furniture - tables and chairs.

Flowerbeds and flower beds from tires

Let's start from the very a simple flower bed and flower beds. Do you think it is difficult to make a multi-tiered flower bed? Maybe, but not from tires. Take a few pieces of different sizes, paint in bright colours and fold it in a slide - one on top of the other. To prevent your slide from falling apart, fasten the tires from the inside with a screwdriver and self-tapping screws. Two per connection will suffice. Inside you fill up the soil, plant the plants. To prevent the soil from spilling out, you can lay the tire inside with a piece of geotextile. It will remove excess water, but will not allow the earth to get enough sleep. A beautiful tiered flower garden is ready.

Tiered bed of tires

If you like flower beds of the correct form, you can make these. For example, folding a flower bed in the form of a camomile out of tires. First, lay out and fasten the tires together in the lower tier. Fill the middle of the tires with earth, as well as the free space inside the circle. There, for better drainage, you can lay broken bricks or other construction debris, sprinkle a little earth on top and tamp. On the prepared surface, stepping back from the edge by more than half the diameter of the tire, lay out the second tier. They are also fastened together, the middle is covered with soil, and the core is erected on top. At the very top, you can plant tall flowers, and on the lower tiers - curb or undersized.

Another way to make a tiered bed of tires

Another variant of a flowerbed of tires in the form of chamomile is in one tier. To do this, you will have to cut the tires.

Flowerbed-chamomile from tires

How to cut tires

In general, when making crafts from tires, they often need to be cut. This is far from easy. More or less easy to cut side surface from protector. People with strong hands and good knives do it by hand. Good, by the way, training for the hands and the entire shoulder girdle. If you already cut with a knife, lubricate the blade with grease: rubber constantly “jams” the metal, and the blade coated with grease slips well.

You can also cut off the sidewall with a jigsaw or grinder. Cutting with a grinder is relatively fast, but the stench is wild. Therefore, the grinder, even if there is one, only makes the first cut, so that you can introduce a jigsaw file. Further work with this tool. For cutting rubber, a blade with a reverse tooth made of good steel is taken.

Tires with cut edges can be used to make a high bed for strawberries

If you have to cut the tread, it is useless to do it with a jigsaw or even more so with a knife. At least with an ordinary knife. Blades made of special steel can cut even iron cord, but hardly anyone wants to disfigure such a tool about old tire. Therefore, most often they work as a grinder. To avoid trouble, the protector is fixed: always think about safety. If the sidewalls are already cut off, the tread band is quite elastic and can be compressed with a clamp. Cut, it does not spring.

How to make a small pond out of a tire, read here.

Flowerpot from the wheel: turn out the tires

If there is a tire with an old rim, you can make a flowerpot on a leg out of it.

Flowerpot from an old car wheel

To do this, cut one sidewall along the tread. And they turn out. This is not an easy task: it requires considerable physical strength and perseverance. The rubber is elastic and it is impossible to turn it out the first time. If not at all, notches are made on the outside across the tread. They should be quite deep, but not through. It will also help if you make cuts along the edge with a depth of at least 5-7 centimeters. They will look like fringes on an inverted tire.

Why turn out? The inner surface is smoother, and the shape can turn out to be more interesting, especially if the edge is not linear, but jagged. You will get a gracefully bent decoration.

Another version of a flowerpot from a tire

For details on how to turn a tire, see the video.

Similarly, you can turn out a tire without a rim. The sequence of actions is the same. First, one of the sidewalls is cut off - straight or in a zigzag. In order for the "petals" to be even, it is desirable to mark them. It is convenient to do this with chalk. According to the mark, they are then cut with an electric jigsaw or a knife (if the cord is synthetic).

The process of turning an old tire into a flower garden

They twist it like this: they step on the inside of the tire, take the edge with their hands and pull it up and towards themselves. It is important to achieve the first result: when at least some part is arched. If the tire looks like the photo below, this is already a success. It is developed by consistently turning the edge and standing on the already turned part - so that it does not turn back.

Turning a tire without a rim

Watch the process again in the video. This time, the tire is turned out without a wheel (by the way, they cut it with a knife).

Even by itself, such an inside-out tire looks good. If you paint it, it gets even better. If desired, they can be combined - different colors, sizes, installed in different ways: on a tire or on legs.

Installation options

A high flower bed always looks beautiful. Especially with ampelous plants. It can also be made from tires, and there are several possibilities. In the photo below, there are two ways to fix the cut tires on different levels. The first is to use stumps for this, to which flowerpots are attached with nails or self-tapping screws. The second is to use reinforcement - three to four rods, on which to put rubber. Having set the tier at the right level, it needs to be fixed; on metal, this can only be done with the help of clamps.

Multi-tiered high flower beds from tires

It is not always possible to put a flowerpot on the ground: some areas are so developed that even one square meter is problematic to distinguish. In this case, people came up with various hanging flowerpots, and also from old tires. Only a small part of the whole tire remains, so there is a lot of cutting ... please be patient. For example, you can do hanging planters in the form of a dolphin, a parrot, a rooster and other outlandish birds. For a few ideas, see photos.

Tire planter - parrot, rooster and dolphin

All these tire crafts. Only a small part of them - the heads - are often made of dense foam. Having cut and polished the part of the desired shape, it is fixed with self-tapping screws lubricated with glue (this is a secret, remember), and then they are painted. How to make a parrot from a tire, see the video.

A cut tire can be used to make a garden path that will last for many years.

Garden Tire Crafts

The imagination of people is limitless and they make amazing decorations from old car tires. The most common crafts are figures of birds and animals. And the most beloved, perhaps, character is a swan. It turns out it is graceful and similar, especially if you know some tricks.

Swans from tires

The main task in the manufacture of figures for the garden from tires is the correct marking. For example, those swans in the photo above do not have their heads cut out quite correctly. It can be made more believable by making a sharp beak. An example of cutting a tire is in the photo below. Cutting such lines is certainly harder, but the result is impressive.

How to carve a swan out of an old tire

The tire is cut along the lines drawn, then the wings are turned outward. In this case, the neck bends quite steeply. To be able to change this bend, a metal plate can be screwed to it with self-tapping screws. When everything is covered with paint, nothing will be visible, and the tilt of the head can be changed, which is also quite relevant. Often a swan is “planted” into a nest from another tire. Then it must be attached with screws: the figure should hold well and be stable.

There is one more improvement - wings. They can be left as is, you can cut “feathers” out of rubber, or you can make feathers out of white plastic bottles(from one liter bottle it turns out 6 feathers), attach them to the grid. Then you get such a bird ...

The body of these decorative swans is made of tires, and all parts are made from improvised materials.

How to make a swan from a tire - from cutting to the final finish - see the video.

Using a similar technology, numerous figures can be made to decorate a plot or garden. The easiest way to make a frog: the body - one or two green-painted tires, legs can be made from scraps of sidewalls or some other materials, eyes - whoever comes up with something - someone even made it from plastic cups or small tires, apparently from a baby stroller .

Tire Frog

They also make bears, flamingos, dragons, crocodiles, giraffes, zebras, donkeys ... it's easier to say who they don't. See some tire crafts in the photo gallery.

It is very easy to make a bear from old tires It is very easy to make bears from tires with your own hands Outlandish palm trees turn green even in winter A donkey from a half of a tire - a muzzle from a piece of wood A stork from tires - is not common ... The figure of the Serpent-Gorynych from tires on a booth ... symbolic)) Graceful pink flamingo in the company of chickens ))) Tire dragon - kids will like Zebra and giraffe are made according to a similar principle - the difference in neck length and color

You can make rides for the playground out of tires. Especially a lot of exciting crafts are obtained for boys: self-propelled guns, guns, cars, tractors ... they will definitely like it.

A children's racing car made of tires is also suitable for the site kindergarten The tractor will cause no less enthusiasm A multi-seat sports car A motorcycle with a sidecar made of old tires ... The eternal desire of boys to play war games will intensify if there is a gun on the site .... almost like a real one Such a self-propelled gun will attract, perhaps, not only kids

Tire garden and garden furniture

It's hard to believe, but even furniture is made from tires: ottomans, tables, chairs. all this can be done from an old tire. The easiest way to make ottomans: put several tires of the same diameter (or not) one on top of the other, fasten them from the inside with self-tapping screws. Fill the upper one with dense furniture foam rubber, sew and put on a cover. If you wish, you can attach legs: at least screw the furniture wheels: it’s easier to move and it doesn’t stain the floor, the second way out is to fix the felt from below (on the staples from the stapler).

Below are step by step photos, which depict the main stages of creating a table or ottoman from a tire. You will need two more circles of plywood or fiberboard suitable diameter, hemp rope is used for decoration. Of the materials at hand, you will need glue and a glue gun, as well as varnish and a brush for applying it. To connect the circles with the tire, you will need a screwdriver and self-tapping screws - 8-10 pieces on each side.

Ottoman or table from old tire

Next, we take a glue gun and warm up the glue, apply it to the sidewall. If there is no such luxury in the household, take glue, which is in a larger tube, such as "liquid nails". It is easier to work with a mounting gun. Apply the strip on the sidewall, glue the hemp rope. Yes, all the way to the top.

Glue the sides with hemp rope

Using the same technology, we decorate the cover of the table (ottoman). You need to start laying from the middle: apply glue, lay the rope.

Decorate the table top

Finishing work - applying varnish. We do slowly, soaking well. Here is what should be the result. If you made a table, you can put glass on top - a rope, even varnished, is not the best best coverage for the table, although beautiful ...

Such an ottoman-table turned out to be both an old tire and a hemp rope

Variety can be achieved through a cover. It can be sewn from a vending dense material.

Cute puff…

You can knit - a large knit looks interesting.

Knitted cover of large knitting - looks interesting

If you don’t feel like sewing and knitting, you can use old knitwear cut into strips. They are cut into long strips 3-5 cm thick, wound into balls and then wrapped around an ottoman. It turns out interesting, especially if several colors are combined.

Cut the old knitwear into strips, wind it into balls, wrap the ottoman with a top. The result is in front of you

Same technique in different colors

If you need a taller ottoman, twist the two tires together with self-tapping screws, and work on them in this form.

How to make a high ottoman

This is the result of labor

See the video for another option.

stroychik.ru

DIY tire flower beds step by step instructions with photos and videos

It is always nice to make something beautiful and useful out of junk things. A good example of such creativity is beautiful flower beds from tires. They are easy to make and the benefits are huge. But the fantasy of country masters is not limited to this. From old wheels, which often just lie on the road and pollute environment, they make outdoor furniture, garden sculptures and even rebuild small children's towns.

What are tire crafts

Such a simple and unsightly material at first glance, like old car tires, in fact, seems to be specially created so that every summer resident can feel like a real artist and decorate his site with real designer flower beds and original author's sculptures. Without exaggeration, anything can be cut out of tires. Such crafts are on a par with those made from plastic bottles. all year round will delight the eyes of the owners and guests of the cottage, and most importantly, will not require special financial investments.

It’s also nice that the benefits of the idea of making DIY crafts from tires are double: on the one hand, we recycle the wheel that polluted the environment, and on the other, we get the original garden decoration or flower bed.

Crafts from used rubber tires amaze with their variety and how rich the imagination of their authors is. Here are the most common ones:

In the photo - flower beds from tires

Small flower bed. The easiest way to make flowerbeds from tires is to leave the tire as it is, just brightly decorate it and fill it with earth. Nothing complicated. Even a weak woman or child can handle this, and such a flower garden will look great.

In this photo - cups made from old wheels

Flower beds from old tires in the form of various objects. Make them harder. The tire is cut into two unequal parts and the larger one is turned inside out. It is worth noting that the edges of the tires can be made in various shapes, it's all about imagination and sleight of hand. In this technique, flower beds are made in the form of a mug, flower, vase. A huge rubber cup made of tires looks very funny. And some craftsmen, in this way, build a whole tea set on their site.

Turtle from old wheels

Flowerbeds and sculptures in the form of animals and fairy-tale characters. A funny frog made of tires, a kind gnome, a mysterious unicorn, beautiful swans, a three-headed dragon, a turtle, a luxurious carriage, a huge telephone - it's easier to list what is not made of this available material. The only condition is to think over the composition from the very beginning so that there are no unpleasant surprises later.

In the photo - multi-tiered flower beds or berries

Multi-tiered flower beds of several tires. The simplest in execution is three-tier, but the number of parts can be more. Several tires of the same or different sizes are placed on top of each other or in a checkerboard pattern. A well made of tires looks spectacular, stylized as a real one and equipped with all its inherent attributes: a chain, a shaft with a visor, a bucket. Such a flower garden can also be used as a vertical bed for growing berries and vegetables.

Flowerbeds from tires for strawberries

A flowerbed for strawberries from tires will take up a minimum of space and give a rich harvest. It is perfect for growing seedlings, herbs, peppers. From such a flower bed, you can make a fence for a raspberry or currant bush, or make several of them and delimit the garden into cultural zones. It is worth mentioning that a tire well is often made not only decorative, but also masks a drainage pit or septic tank.

Experienced craftsmen and craftswomen know many secrets that help them create garden sculptures and flower beds from tires with their own hands. They understand better than anyone how to make unique and inimitable author's crafts out of old rubbish that no one needs. Here are just a few of those secrets:

Imported tires are best suited for work, as the rubber on them is softer and easy to cut. But in their absence, domestic products will fit. In principle, they are quite easy to process and allow you to give crafts from them different shape.
Tires designed for use in winter conditions are more pliable, easier to cut and easier to handle than those used in summer.
The longer the tire has been used and the more worn it is, the thinner, softer and easier it will be to work with: cut and turn.
Before you start creating crafts, the material must be prepared: thoroughly cleaned of dirt, and degreased before painting.
To cut car tires, use a sharp knife with a thin butt. You can check how well it is sharpened by running the blade over a notebook sheet, holding it on weight. If the knife does not cut or tear the paper, it is not sharp enough.
It is more convenient to cut a car tire for garden crafts if you periodically lubricate the knife with machine oil. So it will be easier to enter the rubber. The oil is suitable and used.
When you need to cut out some curly elements, markings are applied to the tire. It will help to achieve a more accurate and accurate result. It is most convenient to apply it with ordinary white chalk, in extreme cases, with a marker.
The durability of the craft depends on what paint to paint the rubber with. For the old wheel tires suitable for both automotive paints and any outdoor paints.
Before painting a tire, it is recommended that its surface be primed. A primer with the addition of a small amount of PVA will increase the strength of the coating and reduce paint consumption.
Paints in aerosol cans speed up the staining process up to 20-30 minutes, and the painted layer itself is made more uniform.
decorative trim can be made from improvised materials. For example, glue the surface with pebbles, bottle fragments, or lay out pictures from colored plastic bottle caps.

It is better to paint a flower bed from a tire not only from the outside, but also from the inside. So they will look more aesthetically pleasing, and black rubber will not be visible from the inside.

Of course, each master has his own secrets, and it is unrealistic to list them all. And when you get into this exciting business - tire sculpture, they will certainly appear in yours.

Several workshops on making crafts from old tires

As mentioned above, tire crafts are diverse. Their appearance and the destination is limited only by the imagination of the master. We suggest you familiarize yourself with the basic models. After reviewing them, you will learn how to make a flower bed out of tires with your own hands and you will be able to create original, different and useful garden accessories yourself.

Simple flower bed

A small flower bed made like a chamomile from one tire is the simplest base model. You can make several such flower beds, arrange them hardly and decorate the approach to the house. Sometimes they are placed on paved or paved areas.

We will need:

One old tire.
Sharp knife.
Marker or chalk.

Mark the place of the cut with a marker. We will cut the tire along them, from thickening to thickening.

Before cutting tires, make sure that they do not have metal cords that can ruin the knife. Usually they are inserted into tires for trucks.

We cut the tire around the entire circumference with even zigzag petals of any shape of your choice (triangular, oval, semicircular).

We turn the tire over and work with its reverse side. Leading the knife along the thickening, cut out a circle from the back of the tire.

Then, around the entire circumference inside the tire, approximately every 20-25 cm, we make transverse cuts from the cut edge to the bend (the end of the tread).

After that, the tire must be turned out. The flowerbed is ready. It remains only to paint it, giving it a more attractive look, fill it with earth and plant plants.

For more clarity, watch the following video:

https://youtu.be/CYtQYhNb0NA

Garden flowerpot from an old wheel

From an old wheel, you can make a beautiful garden vase in a short time. Such flowerpots look better in a pair in front of the house, on opposite sides of the door or porch. Consider a step-by-step master class on their manufacture.

We will need:

Tire with disk.
Sharp knife.
Chalk or marker.

With a chalk or a marker along the entire frontal circumference of the tire, we mark a zigzag line, along which we will begin to cut. Thanks to her, the flowerpot will look like a large flower with many petals.

Cut the tire along the marked line with a sharp knife. To facilitate the process, the knife is periodically dipped in engine oil (used oil is also suitable).

After the wheel is cut, we check if there are any sections that are not completely cut out, and proceed to turn it inside out. It is better to do this together with an assistant, slowly, in parts.

After we managed to unscrew the tire for the future flower bed, it turned out that there is a chamber in the wheel. It needs to be cut out and thrown away.

The vase is ready. His bowl came from the main part of the wheel. It is not necessary to remove the disc from the tire. It serves as an elevation and stand for the vase, and the remains of the tire at its base provide additional support.

We just have to clean, degrease and decide how beautifully to paint our new garden vase. When you fill the bowl with earth, do not forget to put a gasket on its bottom so that the earth does not spill out and make several holes in it to drain the water.

Video instruction for making a flowerpot:

https://youtu.be/5qiq59BKY8M

Swan from an old tire

The most popular garden tire sculptures are swans. They are usually placed next to artificial pond which gives the area a stunning look. You can plant grass in the bird itself, then it will give the impression that it is peeking out from behind the vegetation. Detailed information will help to make it. step-by-step instruction with photo.

We will need:

Sharp knife.
Electric drill for making holes for entering the rubber of the knife.
Sander or file.
Electric jigsaw.
Chalk or marker (marker is better).
Wire 5-6 mm in diameter (hard, to shape the neck of a "swan").
Plastic clamps (for shaping the head).
Roulette.
Gloves.

According to the scheme, we mark the contours of the future swan on the surface of the tire according to the following video, in which the author uses sizes in inches, calling them in the international measurement system - inch. Inch (1 inch) = 2.54 cm.

https://youtu.be/ydcioha556g

How beautiful and accurate our sculpture will turn out depends on the accuracy of the markup.

Let's start cutting. At the initial section, we drill 3-4 holes with a drill at a distance of 3-5 cm and cut the tire between them with a knife. We insert a jigsaw into the resulting cut and begin to cut out the swan.

After all the contours are cut out, we turn the tire out. We try to do it carefully, because careless movements in the thinnest places can tear it.

To make the bird's figure look more neat, we smooth all the cuts along the contour with a grinder.

To shape the neck of a swan, we insert a wire into it. To do this, we drill holes in the center of the neck and to the end of the body every 20 cm. We impose the wire and fix it in the holes with soft staples.

We form the head. We make longitudinal cuts and holes, as shown in the photo, and using the same wire or plastic clamps, we shape the head of a swan.

Our tire swan is ready. It remains to paint it and make a stand.

The swan can be dyed White color or do not paint at all, leaving black. We make the beak red. Swans look very nice in a pair: black and white.

Without a stand, soft rubber swans will not stand. As it, you can simply take any tire and paint it, for example, in blue. Thus, it will symbolize the pond. And you can not be too lazy and make it curly.

We make a figured stand in the same way. We mark the contour on the tire along which we will cut, cut the tire along it, turn it inside out and paint.

https://youtu.be/cBGHZB1_9Hc

In a similar technique, any figures can be made from tires: animals, birds, fairy-tale creatures.

But, if you don't want to mess around with complicated markings and cutting, you can do it easier. For example, to assemble a cute frog from whole tires.

In the photo - a flower bed in the form of a frog

A frog made of tires is very simple. From one or more tires, a larger body and head are assembled, from small wheels, for example, from a baby stroller - eyes, and from rubber scraps of paws.

flowerbed chamomile

A decoration that is easier to make than this flower bed is hard to come up with. Despite the fact that it will need several car tires, it can be assembled in just 15-20 minutes, it looks pretty, neat and will never be superfluous.

We will need:

Three old tires of the same size.
Sharp knife or grinder.

All tires, having previously marked the places of cuts, are cut in half. Before cutting, find out if there are metal cords in the rubber. The knife will not take them, so use the grinder.

To give the future flower bed aesthetics, you can paint the tires. It is better to do this in advance, immediately after cutting.

From 5 halves we form a fence in the shape of a flower and fill it with earth.

Video about the process of creating a flower bed-chamomile:

https://youtu.be/NZ34infaCnQ

cvetydoma.ru

How to cut a tire

1 Topic by Brick 2012-12-11 04:07:22

Hello people! Advise how to cut car tires! I tried to cut the tire with a metal disc on a cutting machine, so the disc burned out very quickly along with part of the rubber.

And how can you make holes in the tires?

2 Reply from Crazy Hands 2012-12-11 04:07:50

Tires are cut depending on their type. Radial tires with a textile cord can be cut with a knife, diagonal tires with a steel cord can be cut with a hacksaw. The tool must be wet and the tire must be treated with soapy water. And the tool for cutting holes depends on the required diameter and the tool available. For example, a tire can be cut through with a sharpened pipe of the desired diameter. It all depends on the size and, accordingly, the thickness of the tire, as well as on the place where the hole is made.

3 Reply from Andkorn 2012-12-11 04:08:43

Hey! There is such a method of cutting tires, tested in practice: take the usual electric jigsaw with the roughest sawing on wood, with wetting with machine oil. It is better to work together, pulling off the cut off part, otherwise it will greatly interfere with work. The tire is cut in five to ten minutes. The hole is also so easy to make, the main thing is to punch the initial hole for the “entry” of the file.

4 Reply from Ya_123 2012-12-11 04:09:29

For the electric jigsaw, there are special wavy knives, just for rubber and other similar materials.

5 Reply from Nafanya 2012-12-11 04:10:05

And you can heat a sharp knife and cut, and so heat and cut as many times as you need.

6 Reply from Crazy hands 2012-12-11 04:10:37

Well, people will write. What hot knife?! All the heat of the knife will be used to melt the rubber, and this melted rubber will stick to the knife, hindering its movement, so this kind of cutting will be much more laborious. It's better to just cut with a cold knife. Although this issue a few seconds after the start of such work, the carver will no longer worry, because he will be poisoned by the toxic fumes released when the rubber is heated and will lose consciousness.

You need to start cutting the tire with a shoe knife. We carry out several times on the same cut, pressing on the board so that the cut diverges and cuts through. Now we insert a good knife into the cut, sharpening towards ourselves (I made a special cutter from an industrial hacksaw blade) and cut with an “up-and-on” movement, simultaneously bending the cut to the side. cut the tire how to cut bread - do not. Rip up the rubber. And it is not necessary for a knife to be razor-sharp: a slight sawtooth of burrs is only good.

I recommend turning the tire out for the winter and letting it mature. Otherwise cut, it will become a wave. It is necessary to remove the trough shape, which will give a long aging of the hoop. And you can do it differently. Make a bunch of cuts on the inverted tire ...

You can cut hoops into ribbons with an ordinary, small grinder. Take care only that the wind is not on the neighbors, otherwise you cannot avoid an untranslatable pun (on one of local dialects) because it's a stinky business. BUT! The rubber is nicely cut off by a grinder, the metal cord is also striped with it and ... In general, cutting a tire is a quick business if you see how once. And to make it completely clear - here's a video for you, where the tire cutting takes place in real time.

http://robinzoid.ru/kak-razrezat-pokryishku/

Tire Pitfalls

When processing and manufacturing products from an old tire, there are pitfalls that are hidden from view, and appear only directly in the process. This article is devoted to these stones.

Trick number 1. Material - rubber.

The tire must be rigidly fixed, or at least to fix the part that is currently being cultivated. In our case, an original technique for cutting tires has been developed. Based on this, it is necessary to cut the tread first of all while the tire has maximum rigidity. If there is, you need to cut the protector and not rest against anything, a bull glass jar will come to the rescue, although after sawing 5-6 centimeters, the jar needs to be moved.

The threads of old and new tires are different, and the results i.e. the properties of the cutting elements are different. For clarity, if you make a swan from a bald tire, then the head of the swan falls into the front, and if from an almost new one, on the contrary, the head is thrown back.

Trick number 2. The presence of a metal cord and the thickness of the tread.

The metal cord is located only over the entire area of the rubbing surface. The metal cord, together with the thickness of the tread itself, creates additional difficulties when cutting the tire.

Using a hacksaw for metal, cutting a tire is very, very difficult, and in some places it is completely impossible.

When processing the main rubbing surface, use:

electric jigsaw (the most successful option - rubber does not burn, and is well processed). Having tried several jigsaws, I was surprised that not every jigsaw can cut a tire.
grinder (in some cases it is convenient, but rubber burns - a lot of smoke)

But the sides of the wheel are easily cut with an ordinary knife. Rarely, but aptly, there are tires without a metal cord at all - probably 1 out of 40.

Trick number 3. The ring on which the tire sits on a metal disk.

The ring is a hardened stranded metal rod bent into a ring. Cutting with a hacksaw for metal is unrealistic, but it can take a long time. The only way out is to use Balgarka. I think it's called the seat ring. Many immediately want to get rid of the ring in some cases, the stiffness of the ring is used in the design.

Trick number 4. Tire painting.

You can paint the wheels with any paint. Nitro enamel dries quickly, and allows you to immediately place and use the figures. But since rubber has to be painted, which deforms during transportation, the paint also cracks and bursts - regardless of the type of paint. Because chemical reaction goes constantly, so the colors fade, white becomes with a yellow tint, so it is better if it is possible to repaint the figures every year.

Trick number 5. Injuries.

Since the cord is metal mesh, therefore, metal hairs are formed on the cut, which strive to cut through the skin. Metal shavings are not a pleasant splinter. Be especially careful with the eyes when sawing with a jigsaw.

Trick number 6. Energy costs.

I would like to immediately warn, but not to scare or dissuade, that the tire weighs quite a bit, and working with a cord and a metal nozzle ring implies the presence of male hands. On average, wheels of 13, 14, 15 radii - the most popular ones weigh an average of 5 to 8 kilograms, and if you judge that one cutting can take about 1 hour, then you will have to turn the wheel more than once.

We conclude from the above.

For processing, cutting the old tire, you must:

a desktop on which the old tire will be cut (see catch 1) or at least just a table;
a hacksaw, a jigsaw, a drill, a grinder (see catch 2.3) - in a word, you may need everything;
hand protection (gloves), eyes (mask, goggles) + all protective equipment necessary when working with power tools.
perseverance and patience, and not least physical strength (try turning the wheel several times)

http://delashop.ru/content/view/28/36/

Reader Tips:

It is easy and simple to cut even Belaz rubber. I bought a RAGE disc and put it on a simple hand-held circular saw. You can also buy with the original RAGE circular saw, but it's cheaper to just buy a disc, as I did.
if cut - Across - then a grinder and a disc for metal.
did not cut once. the disks did not burn out :-) only a bunch of black muck flies around :-(
if it's fast.
if there is no grinder - an ordinary hacksaw for metal.
for metal is needed because when the cut is across the tire, you need to cut the metal cord.
If you cut ALONG (along the circumference), then ... FIG knows he didn’t cut it. perhaps a sharp knife and soap as advised above or a jigsaw.
this again - if you don’t run into a cord.
Good hour! An electric jigsaw with the coarsest saw blade for wood and machine oil. A tire from a Belarus tractor for about 10 minutes, it’s more convenient for two, pulling off the cut off part.

You can watch a video on how to cut a tire

It is always nice to make something beautiful and useful out of junk things. A good example of such creativity is beautiful flowerbeds made of tires. They are easy to make and the benefits are huge. But the fantasy of country masters is not limited to this. From old wheels, which often just lie on the road and pollute the environment, they make street furniture, sculptures for the garden, and even rebuild small children's towns.

Such a simple and unsightly material at first glance, like old car tires, in fact, seems to be specially created so that every summer resident can feel like a real artist and decorate his site with real designer flower beds and original author's sculptures. Without exaggeration, anything can be cut out of tires. Such crafts, along with those made from plastic bottles, will delight the eyes of the owners and guests of the cottage all year round, and most importantly, they will not require special financial investments.

It's also nice that the benefits of the idea of making DIY crafts from tires are twofold: on the one hand, we recycle the wheel that polluted the environment, and on the other, we get an original garden decoration or flower bed.

Crafts from used rubber tires amaze with their variety and how rich the imagination of their authors is. Here are the most common ones:

In the photo - flower beds from tires

In this photo - cups made from old wheels

Turtle from old wheels

Flowerbeds and sculptures in the form of animals and fairy-tale characters. A funny tire frog, a kind gnome, a mysterious unicorn, beautiful swans, a three-headed dragon, a turtle, a luxurious carriage, a huge telephone - it is easier to list what is not made from this affordable material. The only condition is to think over the composition from the very beginning so that there are no unpleasant surprises later.

In the photo - multi-tiered flower beds or berries

Flowerbeds from tires for strawberries

Imported tires are best suited for work, as the rubber on them is softer and easy to cut. But in their absence, domestic products will fit. In principle, they are quite easy to process and allow you to give crafts from them a different shape.
Tires designed for use in winter conditions are more pliable, easier to cut and easier to handle than those used in summer.
The longer the tire has been used and the more worn it is, the thinner, softer and easier it will be to work with: cut and turn.
Before you start creating crafts, the material must be prepared: thoroughly cleaned of dirt, and degreased before painting.
To cut car tires, use a sharp knife with a thin butt. You can check how well it is sharpened by running the blade over a notebook sheet, holding it on weight. If the knife does not cut or tear the paper, it is not sharp enough.
It is more convenient to cut a car tire for garden crafts if you periodically lubricate the knife with machine oil. So it will be easier to enter the rubber. The oil is suitable and used.
When you need to cut out some curly elements, markings are applied to the tire. It will help to achieve a more accurate and accurate result. It is most convenient to apply it with ordinary white chalk, in extreme cases, with a marker.
The durability of the craft depends on what paint to paint the rubber with. For old wheel tires, both car paints and any outdoor paints are suitable.
Before painting a tire, it is recommended that its surface be primed. A primer with the addition of a small amount of PVA will increase the strength of the coating and reduce paint consumption.
Paints in aerosol cans speed up the staining process up to 20-30 minutes, and the painted layer itself is made more uniform.
Decorative trim can be made from improvised materials. For example, glue the surface with pebbles, bottle fragments, or lay out pictures from colored plastic bottle caps.

It is better to paint a flower bed from a tire not only from the outside, but also from the inside. So they will look more aesthetically pleasing, and black rubber will not be visible from the inside.

Of course, each master has his own secrets, and it is unrealistic to list them all. And when you get into this exciting business - tire sculpture, they will certainly appear in yours.

Several workshops on making crafts from old tires

As mentioned above, tire crafts are diverse. Their appearance and purpose are limited only by the imagination of the master. We suggest you familiarize yourself with the basic models. After reviewing them, you will learn how to make a flower bed out of tires with your own hands and you will be able to create original, different and useful garden accessories yourself.

Simple flower bed

A small flower bed, made like a daisy from a single tire, is the simplest basic model. You can make several such flower beds, arrange them hardly and decorate the approach to the house. Sometimes they are placed on paved or paved areas.

We will need:

One old tire.
Sharp knife.
Marker or chalk.

Mark the place of the cut with a marker. We will cut the tire along them, from thickening to thickening.

Before cutting tires, make sure that they do not have metal cords that can ruin the knife. Usually they are inserted into tires for trucks.

We cut the tire around the entire circumference with even zigzag petals of any shape of your choice (triangular, oval, semicircular).

We turn the tire over and work with its reverse side. Leading the knife along the thickening, cut out a circle from the back of the tire.

Then, around the entire circumference inside the tire, approximately every 20-25 cm, we make transverse cuts from the cut edge to the bend (the end of the tread).

After that, the tire must be turned out. The flowerbed is ready. It remains only to paint it, giving it a more attractive look, fill it with earth and plant plants.

For more clarity, watch the following video:

Garden flowerpot from an old wheel

From an old wheel, you can make a beautiful garden vase in a short time.
Such flowerpots look better in a pair in front of the house, on opposite sides of the door or porch. Consider a step-by-step master class on their manufacture.

We will need:

Tire with disk.
Sharp knife.
Chalk or marker.

Cut the tire along the marked line with a sharp knife. To facilitate the process, the knife is periodically dipped in engine oil (used oil is also suitable).

After the wheel is cut, we check if there are any sections that are not completely cut out, and proceed to turn it inside out. It is better to do this together with an assistant, slowly, in parts.

After we managed to unscrew the tire for the future flower bed, it turned out that there is a chamber in the wheel. It needs to be cut out and thrown away.

Video instruction for making a flowerpot:

Swan from an old tire

The most popular garden tire sculptures are swans. Usually they are placed near an artificial pond, which gives the site a stunning look. You can plant grass in the bird itself, then it will give the impression that it is peeking out from behind the vegetation. A detailed step-by-step instruction with a photo will help to make it.

We will need:

Sharp knife.
Electric drill for making holes for entering the rubber of the knife.
Sander or file.
Electric jigsaw.
Chalk or marker (marker is better).
Wire 5-6 mm in diameter (hard, to shape the neck of a "swan").
Plastic clamps (for shaping the head).
Roulette.
Gloves.

How beautiful and accurate our sculpture will turn out depends on the accuracy of the markup.

After all the contours are cut out, we turn the tire out. We try to do it carefully, because careless movements in the thinnest places can tear it.

To make the bird's figure look more neat, we smooth all the cuts along the contour with a grinder.

We form the head. We make longitudinal cuts and holes, as shown in the photo, and using the same wire or plastic clamps, we shape the head of a swan.

Our tire swan is ready. It remains to paint it and make a stand.

The swan can be painted white or not painted at all, leaving it black. We make the beak red. Swans look very nice in a pair: black and white.

We make a figured stand in the same way. We mark the contour on the tire along which we will cut, cut the tire along it, turn it inside out and paint.

In a similar technique, any figures can be made from tires: animals, birds, fairy-tale creatures.

But, if you don't want to mess around with complicated markings and cutting, you can do it easier. For example, to assemble a cute frog from whole tires.

In the photo - a flower bed in the form of a frog

A frog made of tires is very simple. From one or more tires, a larger body and head are assembled, from small wheels, for example, from a baby stroller - eyes, and from rubber scraps of paws.

flowerbed chamomile

We will need:

Three old tires of the same size.
Sharp knife or grinder.

All tires, having previously marked the places of cuts, are cut in half. Before cutting, find out if there are metal cords in the rubber. The knife will not take them, so use the grinder.

To give the future flower bed aesthetics, you can paint the tires. It is better to do this in advance, immediately after cutting.

I think it will be clear from the picture: why cut the tire. Indeed, they do not rot and do not spread from the sun-frost. Accidental blows, unlike asbestos-cement sheet, do not harm them. After all, there are many applications for rubber bands. Even if you don’t turn over the beds, like mine. Even if not cut the tire on a ribbon, hoops obtained from it, can be used as a compost bin or vertical bed. Yes, I hear a lot that, they say, it’s harmful, terrible and all that ... I don’t know. But my ants, it is near the rubber, that they arrange their summer masonry-incubators, where they keep their pupae. Whether from rubber harm - I do not think that they would have worked like that. And if they are not afraid, then I somehow do not fit.
OK. Everyone decides this question for himself. But who decided to cut the tire for their needs - so a few tips:
You need to start cutting the tire with a shoe knife. We carry out several times on the same cut, pressing on the board so that the cut diverges and cuts through. Now we insert a good knife into the cut, sharpening towards ourselves (I made a special cutter from an industrial hacksaw blade) and cut with an “up-and-on” movement, simultaneously bending the cut to the side. cut the tire how to cut bread - no need. Rip up the rubber. And it is not necessary for a knife to be razor-sharp: a slight sawtooth burr is only good.
I recommend turning the tire out for the winter and letting it mature. Otherwise cut, it will become a wave. It is necessary to remove the trough shape, which will give a long aging of the hoop. And you can do it differently. Make a bunch of cuts on the inverted tire ...
You can cut hoops into ribbons with an ordinary, small grinder. Just take care that the wind is not on the neighbors, otherwise you cannot avoid an untranslatable pun (in one of the local dialects) because this is a stinky business. BUT! The rubber is nicely cut off by a grinder, the metal cord is also striped with it and ... In general, cutting a tire is a quick business if you see how once.
As an example, why cut tires are needed, I can bring to your attention

It is always nice to make something useful out of a junk item, and if the craft turns out to be beautiful as well, the pleasure is double. One example is tire crafts. They make decorations for a country or garden plot, various flowerpots and flower girls, build children's attractions and even make country furniture - tables and chairs.

Flowerbeds and flower beds from tires

Let's start with the most, perhaps, simple flower beds and flower beds. Do you think it is difficult to make a multi-tiered one? Maybe, but not from tires. Take several pieces of different sizes, paint them in bright colors and fold them in a slide - one on top of the other. To prevent your slide from falling apart, fasten the tires from the inside with a screwdriver and self-tapping screws. Two per connection will suffice. Inside you fill up the soil, plant the plants. So that the soil does not spill out, you can lay the tire inside with a piece. It will remove excess water, but will not allow the earth to get enough sleep. A beautiful tiered flower garden is ready.

Another option for flowerbeds of tires in the form of chamomile is in one tier. To do this, you will have to cut the tires.

How to cut tires

In general, when making crafts from tires, they often need to be cut. This is far from easy. It is more or less easy to cut off the side surface from the tread. People with strong hands and good knives do it by hand. Good, by the way, training for the hands and the entire shoulder girdle. If you already cut with a knife, lubricate the blade with grease: rubber constantly “jams” the metal, and the blade coated with grease slips well.

If you have to cut the tread, it is useless to do it with a jigsaw or even more so with a knife. At least with an ordinary knife. Blades made of special steel can even cut iron cord, but hardly anyone wants to disfigure such a tool on an old tire. Therefore, most often they work as a grinder. To avoid trouble, the protector is fixed: always think about safety. If the sidewalls are already cut off, the tread band is quite elastic and can be compressed with a clamp. Cut, it does not spring.

Flowerpot from the wheel: turn out the tires

If there is a tire with an old rim, you can make a flowerpot on a leg out of it.

Why turn out? The inner surface is smoother, and the shape can turn out to be more interesting, especially if the edge is not linear, but jagged. You will get a gracefully bent decoration.

For details on how to turn a tire, see the video.

They twist it like this: they step on the inside of the tire, take the edge with their hands and pull it up and towards themselves. It is important to achieve the first result: when at least some part is arched. If the tire looks like the photo below, this is already a success. It is developed by consistently turning the edge inside out and standing on the part that has already been turned out so that it does not turn back out.

Watch the process again in the video. This time, the tire is turned out without a wheel (by the way, they cut it with a knife).

A high flower bed always looks beautiful. Especially with ampelous plants. It can also be made from tires, and there are several possibilities. In the photo below, there are two ways to fix the cut tires at different levels. The first is to use stumps for this, to which flowerpots are attached with nails or self-tapping screws. The second is to use reinforcement - three or four rods, on which to put rubber. Having set the tier at the right level, it needs to be fixed; on metal, this can only be done with the help of clamps.

It is not always possible to put a flowerpot on the ground: some areas are so developed that it is problematic to single out even one square meter. In this case, people came up with various hanging flowerpots, and also from old tires. Only a small part of the whole tire remains, so there is a lot of cutting ... please be patient. For example, you can make hanging planters in the form of a dolphin, parrot, rooster and other outlandish birds. For a few ideas, see photos.

Tire planter - parrot, rooster and dolphin

All these tire crafts. Only a small part of them - the heads - are often made of dense foam. Having cut and polished the part of the desired shape, it is fixed with self-tapping screws smeared with glue (this is a secret, remember), and then painted. How to make a parrot from a tire, see the video.

Below are step-by-step photos that capture the main stages of creating a table or ottoman from a tire. You will need two more circles of plywood or fiberboard of a suitable diameter, a hemp rope is used for finishing. Of the materials at hand, you will need glue and a glue gun, as well as varnish and a brush for applying it. To connect the circles with the tire, you will also need self-tapping screws - 8-10 pieces on each side.

Using the same technology, we decorate the cover of the table (ottoman). You need to start laying from the middle: apply glue, lay the rope.

Finishing work - applying varnish. We do slowly, soaking well. Here is what should be the result. If you made a table, you can put glass on top - a rope, even varnished, is not the best cover for a table, although it is beautiful ...