Border for a flower bed made of plastic bottles. Flower beds from plastic bottles: a colorful flower garden made from affordable material. Decorative flower bed for the garden

Ordinary plastic bottles sometimes turn out to be a very necessary, useful and cheap material in everyday life. Used plastic does not clog environment, but gets a second life, proving to be a valuable way to make many original things. In this article, we will describe the process of creating spectacular flower beds for parks. country houses and suburban areas. You'll get detailed master class to create a flower bed from plastic bottles with your own hands.

For convenience, when caring for flowers around a flower bed, you need a border that can be built from unnecessary bottles, the very ones that sometimes accumulate in abundance in the household at home and in summer cottages. That it will turn out necessarily beautiful, you can see in the photo.

As a fence for flower beds, this material is very convenient. It retains moisture, preventing it from spreading outside the flower garden. Useful plants do not grow beyond the fence, and weeds are not able to penetrate inside it.

How to make a border

Curb bottles are suitable for a wide variety of types, capacities, uses, qualities and colors, depending on what you have on hand. The main thing is that they are the same among themselves. Hard plastic is preferable, but absolutely everything will do, you just need to show your imagination and taste.

• It is possible to have a fence in the manufacture of a curb, both in a vertical and in a horizontal direction. In the first case, plastic containers do not need initial processing.

For pre-treatment, it is necessary to stock up on paint in sufficient quantities. And not just any will do. Without fail, it must be resistant to water, and the texture is dense. Please note that acetone-based dyes will damage plastic. Oil paint is quite suitable if you are not embarrassed by a specific smell and long drying times. You can use a spray bottle. This will facilitate the work, and the result will completely satisfy you.

For this, a trench is dug, of a pre-selected depth. It all depends solely on your preferences. From how deep you go into the ground, digging with a shovel, the height of the fence depends.

After that, the process of tightly packing the bottles should begin. If you decide to arrange the source material in a vertical manner, proceed in the chosen direction, while filling the stacked bottles with earth, which is compacted at the end of the process. All this is done in such a way that the border turns out to be the depth you need.

When laying the source material in a horizontal way, it will be more difficult for you, because the process itself requires precision. Here the trench you dig will not be as deep. And the necks of the bottles, in this case, are not recommended to be cut. Their bottoms can optionally be turned inside the flower garden or, if you like it more, in a completely opposite way. This method is good because it allows you to strengthen the fence, making it multi-tiered. It is difficult to perform, but it looks much more beautiful. At the very end, the necks of the bottles must be fastened with a net and thoroughly sprinkled with earth.

In the summer for owners of cottages and garden plots it is difficult to find a more affordable item than an ordinary plastic bottle. In the heat of mineral waters and carbonated drinks, people drink in such quantities that it is hard to imagine. Therefore, most likely, when you finish working on the curb, you will still have some amount of plastic debris. And this leftover can be used to build structures to decorate and successfully design the resulting flower bed, and then you will learn how to do this.

And another element of decor

To create this masterpiece, which you can admire for a long time, is not difficult at all. And the swan flowerbed will look just amazing. The figurine of a swan in this case is only decorative element, not more. At the end of the work, you will place it inside the flower bed, as shown in the photo.

To make a flower bed you will need a piece of plywood small size, as well as wooden or plastic slats. The body of the figurine, which will be made in the form of a flower vase, is best made from a disused container. Literally everything is suitable here from unnecessary basins and bowls to old boxes. And even if you don’t have anything like that at hand, just take a plastic film. After tearing out a hole, wrap the inner walls of the recess with it, and put pebbles on the bottom so that water flows freely during irrigation.

If you have a jigsaw, then you can make the neck and head of a bird quickly and in just a few minutes. In the absence of it, you will have a little more difficulty due to the need to operate with an ordinary knife and manually, cutting out graceful curves. But if you first facilitate your work and draw a conceived scheme on the rail, you will greatly simplify the task.

It is very important for the appearance of the figurine to carefully build the plumage of a bird, for this you should cut the slats-slats so that they make segments of the same length. Next, these blanks need to be painted in White color(if you wish, you can make the swan black). And if you decide to create a composition, it is possible to erect two swans of different colors at once.

Decorative flower bed for the garden

It is extremely beautiful to plant some kind of bright flowers: red or yellow. But if you do not like this idea, come up with something creative to your liking, opening up full play to your talents. And if you like variety, then next year you can plant other types of flowers in the flower bed, and the composition will look different every time. Make a choice to your taste, the main thing is that the plants planted by you bloom for a long time and please the eye.

And it is not at all necessary to plant flowers directly into the ground; you can put flower pots inside the structure. And the swan itself, as a decoration for the garden, should be moved from place to place from time to time.

If you follow our advice, then you will surely succeed in bringing this idea to life. And it’s not even necessary to make a flower bed in the form of a swan, you can use images of a wide variety of animals.

Video tutorials on the topic

Now, if you decide to try to implement the ideas described in our article, you can try right now. And to make it clearer and easier for you, watch the video tutorials that we have selected for you. There you will learn many new and interesting details about the design of flower beds with plastic bottles.

Most interesting articles:

Flowerbeds from plastic bottles: a master class with various examples of colorful design

This material is valuable because it is accessible and convenient.

Ordinary plastic bottles sometimes turn out to be a very necessary, useful and cheap material in everyday life. Used plastic does not litter the environment, but gets a second life, proving to be a valuable way to make many original things. In this article, we will describe the process of creating spectacular flower beds for parks of country houses and summer cottages.

You will receive a detailed master class on creating a flower bed from plastic bottles with your own hands.

For convenience, when caring for flowers around a flower bed, you need a border that can be built from unnecessary bottles, the very ones that sometimes accumulate in abundance in the household at home and in summer cottages.

That it will turn out necessarily beautiful, you can see in the photo.

As a fence for flower beds, this material is very convenient.

It retains moisture, preventing it from spreading outside the flower garden. Useful plants do not grow beyond the fence, and weeds are not able to penetrate inside it.

How to make a border

Before starting work, it is necessary to think over its details well.

Curb bottles are suitable for a wide variety of types, capacities, uses, qualities and colors, depending on what you have on hand.

The main thing is that they are the same among themselves. Hard plastic is preferable, but absolutely everything will do, you just need to show your imagination and taste.

But helpful tips still useful:

• For a nice design, you can use both darkened and transparent material, but it is better to pre-paint it in a color that is pleasant for you.
• When choosing the size of the bottles, it should be taken into account that with an increase in the material, the size of the flower bed itself will also increase.
• It is possible to have a fence in the manufacture of a curb, both in a vertical and in a horizontal direction.

  In the first case, plastic containers do not need initial processing.

• When laying the bottles, they should be filled with earth. You can pre-cut their neck for easy filling. On the one hand, this method greatly simplifies the process, because the trench for laying bottles can not be dug very deep. But on the other hand, the fence will be less durable precisely for this reason.

For pre-treatment, it is necessary to stock up on paint in sufficient quantities.

And not just any will do. Without fail, it must be resistant to water, and the texture is dense. Please note that acetone-based dyes will damage plastic. Oil paint is quite suitable if you are not embarrassed by a specific smell and long drying times. You can use a spray bottle. This will facilitate the work, and the result will completely satisfy you.

After you have completed all the preparations, you can proceed to the main part - the construction of the border.

For this, a trench is dug, of a pre-selected depth.

It all depends entirely on your preferences. From how deep you go into the ground, digging with a shovel, the height of the fence depends.

After that, the process of tightly packing the bottles should begin. If you decide to arrange the source material in a vertical manner, proceed in the chosen direction, while filling the stacked bottles with earth, which is compacted at the end of the process.

All this is done in such a way that the border turns out to be the depth you need.

When laying the source material in a horizontal way, it will be more difficult for you, because the process itself requires precision. Here the trench you dig will not be as deep.

And the necks of the bottles, in this case, are not recommended to be cut. Their bottoms can optionally be turned inside the flower garden or, if you like it more, in a completely opposite way. This method is good because it allows you to strengthen the fence, making it multi-tiered.

It is difficult to perform, but it looks much more beautiful. At the very end, the necks of the bottles must be fastened with a net and thoroughly sprinkled with earth.

How to make a flower bed a work of art

In summer, it is difficult for owners of cottages and garden plots to find a more affordable item than an ordinary plastic bottle.

In the heat of mineral waters and carbonated drinks, people drink in such quantities that it is hard to imagine. Therefore, most likely, when you finish working on the curb, you will still have some amount of plastic debris. And this leftover can be used to build structures to decorate and successfully design the resulting flower bed, and then you will learn how to do this.

Creating with your own hands a variety of original crafts and placing them in a conspicuous place in country garden, you will be very pleased with yourself and will be able to show off the creations of your hands to neighbors and friends who will come to visit you.

These decorations will be a bright, wonderful and interesting element in the design of parks in country house and household plots for various purposes and sizes.

How to decorate a flower bed with plastic bottles

And another element of decor

To create this masterpiece, which you can admire for a long time, is not difficult at all.

And the swan flowerbed will look just amazing. The figurine of a swan in this case is only a decorative element, nothing more. At the end of the work, you will place it inside the flower bed, as shown in the photo.

To make a flower bed, you will need a piece of plywood of a small size, as well as wooden or plastic slats.

The body of the figurine, which will be made in the form of a flower vase, is best made from a disused container. Literally everything is suitable here from unnecessary basins and bowls to old boxes.

And even if you don’t have anything like that at hand, just take a plastic film. After tearing out a hole, wrap the inner walls of the recess with it, and put pebbles on the bottom so that water flows freely during irrigation.

If you have a jigsaw, then you can make the neck and head of a bird quickly and in just a few minutes. In the absence of it, you will have a little more difficulty due to the need to operate with an ordinary knife and manually, cutting out graceful curves.

But if you first facilitate your work and draw a conceived scheme on the rail, you will greatly simplify the task.

It is very important for the appearance of the figurine to carefully build the plumage of a bird, for this you should cut the slats-slats so that they make segments of the same length. Next, these blanks need to be painted white (if you wish, you can make the swan black).

And if you decide to create a composition, it is possible to erect two swans of different colors at once.

Decorative flower bed for the garden

Once you've completed the bulk of your work, consider the types of flowers that will work with the arrangement. It is very important that everything is combined in style and color. It looks very impressive if you plant flowers of the same color inside a white swan to complete the classic image of this beautiful bird.

It is extremely beautiful to plant some bright flowers inside the black swan: red or yellow.

But if you do not like this idea, come up with something creative to your liking, opening up full play to your talents. And if you like variety, then next year you can plant other types of flowers in the flower bed, and the composition will look different every time. Make a choice to your taste, the main thing is that the plants planted by you bloom for a long time and please the eye.

And it is not at all necessary to plant flowers directly into the ground; you can put flower pots inside the structure.

And the swan itself, as a decoration for the garden, should be moved from place to place from time to time.

If you follow our advice, then you will surely succeed in bringing this idea to life.

How to make flower beds from plastic bottles - original ideas and workshops

And it’s not even necessary to make a flower bed in the form of a swan, you can use images of a wide variety of animals.

Video tutorials on the topic

Now, if you decide to try to implement the ideas described in our article, you can try right now.

And to make it clearer and easier for you, watch the video tutorials that we have selected for you. There you will learn many new and interesting details about the design of flower beds with plastic bottles.

Most interesting articles:

How to make a plastic bottle flower bed fence your own

Than only in the country they do not enclose the beds.

All sorts of materials lying around in the yard are used. By right, a plastic bottle can be considered a hero of our time. On the farm, they are trying to adapt it as a feeder, drinker, watering device, etc. Gardeners are popular with beds made of plastic bottles, on which flowers and garden crops can be grown.

Content

Options for making beds from PET bottles

It is not difficult to make beautiful flower beds from PET bottles with your own hands.

Crafts for the garden from plastic bottles

So, let's look at different options for cultivation suburban area.

Advice! To get a beautiful garden bed, you need to try to collect multi-colored plastic bottles, and combine different fencing options from them.

The simplest border

The simplest fencing of a flower bed can be made with your own hands by simply digging bottles along the contour of the garden.

It should be noted right away that it will take very a large number of containers. Bottles are only one size. It is optimal for a curb to use containers with a capacity of 1.5–2 liters.

Now let's move on to color.

Transparent bottles inside can be painted in any color. It gives vent to fantasy and fiction. To do this, take white acrylic paint, add the color you like, and then dilute to a liquid consistency. It is very easy to paint the inner walls of the bottle.

A little liquid paint is poured into the container, closed with a cork and shaken vigorously. After achieving the desired effect, the excess paint is drained.

Advice! If you are lucky enough to collect multi-colored plastic containers, the staining process is eliminated. The plastic retains its factory color for a long time, without fading even in the sun.

A border of plastic containers can be made in three ways:

• In each bottle, the part tapering to the neck is cut off.

  A container with a bottom is tightly clogged with damp soil, and inverted, they are dug along the contour of the bed.

• In order not to cut off the neck of each bottle, you will need a lot of dry sand or soil.

  All containers are filled with loose filler to the very top, after which they are twisted with corks. Further work consists of the same digging bottles upside down.

• From brown or green bottles with your own hands, you can make the simplest heating of the garden. The entire container is filled with plain water, tightly twisted with corks, after which they are dug in along the contour of the garden in a similar way. Since the dark color attracts the heat of the sun well, bottled water will heat up during the day. At night, the accumulated heat will warm the soil of the bed along with the root system of growing plantations.

All options for made borders will last for many seasons. If necessary, the bed fence can be easily removed from the ground to be moved to another place or simply thrown away.

Making a vertical flower bed

In a small summer cottage, a vertical flower bed allows you to save space, but at the same time grow as many flowers or strawberries as possible.

There are many manufacturing options vertical flower beds, but in any case, you will need a strong support to secure the bottles.

Any vertical structure will act as it. It can be a building wall, a fence, a mesh fence, a pole, or a downed wooden shield.

Consider two options for the manufacture of vertical beds:

Having shown imagination, you can make high beds of complex shape from plastic containers with your own hands. Suppose, after the manufacture of an ordinary vertical bed, there are a lot of bottoms cut off from bottles.

They make an excellent flower vase. As the base of the structure, you will temporarily need a large children's ball. The bottoms of the bottles are glued together with a hot gun, but they are not fixed to the ball. It is needed only to give shape to the garden. From the bottoms you should get a ball, as shown in the photo, but a large neck remains at the bottom for filling the soil and planting plants.

The finished ball is turned upside down, the ball is blown off and taken out from the inside.

The resulting spherical flowerpot is installed in a permanent place. For reliability, the bottom can be cemented. The bottom of the flowerpot and the side walls are covered with geotextiles.

It will prevent the soil from spilling out, plus it will allow excess water to leave the garden after rain. Fertile soil is poured inside the flowerpot and plants are planted.

Advice! Using a similar method, the garden bed can be given any shape, for example, boats.

Hanging flower beds

Ornamental plants and flowers look beautiful in hanging beds.

In fact, this design resembles a planter, only instead of a flower pot they hang a plastic bottle. The container can be positioned with the neck up or down, as you like.

Consider one of the examples of making a suspended garden bed:

• A large through window is cut out in the side walls.

  From below, the side is left higher to make a place for the soil.

• From above, the bottle is pierced through and through the holes a rope is pulled for hanging.

  Instead of a cord, a chain or simple wire will do.

• A drainage hole is drilled at the bottom of the bottle. Excess water after watering will drain through it. If the container with the flower will hang under a canopy, you need to take care of a small pallet. Otherwise, after each watering, dirty water will drip onto the floor or a passing person.

I pour the soil inside the prepared bottle, plant the plant, and then hang it on a nail or hook.

Original flower beds from large bottles

If there are small children at home, you can make a fabulous flower bed for them with your own hands.

The heroes of modern cartoons are locomotives, robots, cars, etc. All these characters can be made from large five-liter containers. Typically, these bottles are made from transparent plastic, so you will have to bring beauty with paint.

The easiest way is to make a train with wagons, a boat or a pig out of bottles. The basis of the design is a container laid on its side with a hole cut out from above for planting flowers.

Wide corks taken from five-liter bottles will replace the wheels of a train or car. If the bed is in the shape of a piglet, the ears are cut out of a colored bottle, and a patch on the cork can be drawn with a marker.

The video shows a master class of flower beds from bottles:

Two more ways to make a vertical bottle garden

Now we will look at two more ways to make a bed out of plastic bottles so that it takes up a minimum of space in the yard and is beautiful.

By right, these structures can also be called vertical.

Boat wall

This method of making vertical beds is suitable even for decorating walls finished with expensive decorative plaster.

The thing is that the wall does not have to be drilled to secure the bottles. All containers are suspended on ropes according to the principle of a rope ladder. For each row, it is optimal to use one of your own color of plastic containers in order to achieve aesthetics.

To make beds in all bottles, one is cut out on the side big window. In horizontal form, the container resembles a small boat. Further, small but strong hooks must be fixed to the eaves of the building. They must support the weight of the boats with soil.

On each bottle, through holes are made in the neck and bottom area, through which a nylon cord is pulled. Under the capacity of each row, a thick knot is tied on a rope. He will not let the bottle slide down.

It is optimal to make each ladder step between the boats 50 cm, and all adjacent rows must be suspended with an offset up or down by 25 cm.

On the wall, you will get even horizontal rows of boats, but the bottles themselves will hang in a checkerboard pattern relative to each other. This arrangement will help to optimally cover the entire wall area, while maintaining a large space between the bottles in a vertical row for the free growth of plants.

Pyramid bed

To make this bed model, you will need to build a pyramid. What size it will be depends on the owner. If the farm has wooden beam, from which you can assemble the frame of the pyramid. On the jumpers, horizontally stacked five-liter bottles with a cut-out window for plants are fixed with self-tapping screws.

A flower garden pyramid can be made from boards. On each tier, the workpieces are placed flat or at a slight angle. Under the flower pots in the boards, holes are drilled with a drill with a round nozzle.

The bottles are cut in half, the neck is thrown away, and the lower part is inserted into the prepared holes. To prevent the pots from falling out of the pyramid, the upper edge of the bottle is folded over, after which it is fixed to the board with a stapler or self-tapping screw.

Conclusion

There are a lot of options for making beds from plastic containers. There are no requirements for these designs, so each master shows his own talent.

DIY crafts from plastic bottles
How to make a garden fence out of plastic bottles
Beds from plastic panels to give their own hands
DIY flowerbeds from plastic bottles photo
Beds from plastic bottles
Motorhome - catalog of motorhomes buy in Moscow

Bottles for bottles from plastic bottles: a master class with various examples of colorful shapes

This material is valuable because it is affordable and convenient.

Ordinary plastic bottles are sometimes very useful, useful and cheap.

The plastic used does not pollute the environment, it takes on another life, which turns out to be a valuable way to create many original things. In this article, we'll walk you through the process of creating spectacular home park and suburban prefabs. You will prepare a detailed master class on creating a flower bed from plastic bottles with your own hands.

For the convenience of caring for flowers around the flower bed, you need a border, which can be made from waste bottles that sometimes accumulate in different houses of the house and in suburban areas.

You can see the photo in what is absolutely necessary.

This material is very convenient as a flower bed. It retains moisture, prevents it from spreading through the color.

Useful plants do not grow above the fence, and weeds cannot enter it.

How to make a border

Before you begin, you need to carefully consider your details.

The edges of the border will match different types, every opportunity, purpose, quality and color, depending on what you have on hand. The main thing is that they are identical to each other.

Hard plastic is better, but whatever it does will show its imagination and taste.

Useful tips are still useful:

• For a good shape you can use a dark and transparent material, but it is better to paint it in a pleasant color.
• When choosing the size of the bottles, it should be noted that the size of the flower bed will increase with the increase in material.
• Guardrails can be positioned both vertically and horizontally when the curve is running.

  In the first case, plastic containers do not require initial processing.

• When laying the bottles, they must be filled with soil. Previously, you can cut out the door for easy charging. On the one hand, this method greatly simplifies the process, because the trench for laying the bottles cannot be dug deep. But, on the other hand, the fence will be less accurate for this reason.

For pre-treatment, you need to accumulate enough paint.

And not at all. Without breaking, it should be waterproof and the texture is dense. Please note that colors based on acetone solvents will degrade plastic. An oily color is very suitable if you do not soften the special smell and long periods of drying. You can use a spray container. This will make your work easier and the result will satisfy you.

After completing all the preparations, you can continue the main part - the location of the border.

To do this, dig a bright, pre-selected depth.

It all depends on your desires.

The best plastic bottle craft ideas to give them a hand

Due to how deep you go into the ground when digging with a shovel, the height of the fence depends.

After that, the process of tightly packing the bottles should begin. In case you decide on a vertical layout of the raw material, work in the chosen direction while you sleep with the bottles, which are provided with soil that shrinks at the end of the process.

All this is done in such a way that the border shows the depth you need.

When laying the source material horizontally, you will have more problems, because the process itself requires precision.

This ditch you're digging won't be that deep. And the neck of the bottles, in this case, is not recommended for trimming. Their bottom can be turned into a flower garden at will or, if so, the opposite is preferred.

This method is good because it allows you to strengthen the fence and make it layered. It's hard to do, but it looks much better. At the very end of the bottles, it should be sealed with a net and carefully sprinkled with soil.

How to make a flower artwork

During the summer, summer home owners and garden community owners are hard pressed to find a more affordable item than the average plastic bottle.

In warm mineral waters and carbonated drinks people drink in quantities that are hard to imagine. So chances are, when you're done curbing, you still have plastic leftovers.

And this residue can be used to create structures for decoration and to successfully create a flower bed, and then you will learn how to do it.

You create your hands from different original crafts and place them in a prominent place in the garden, you will be very pleased with yourself and you will be able to show off your hand creation to neighbors and friends who visit you.

These decorations will be a bright, wonderful and interesting element in the design of parks in the country and in estates of various purposes and sizes.

How to decorate a flower garden with plastic bottles

And one more element of decoration

If you want to create this masterpiece that you can admire for a long time, it's not difficult at all.

And the swan will be just wonderful. The number of the swan in this case is just a decorative element, nothing more. At the end of the work, put it on the flower bed, as shown in the figure.

To complete the workpiece, you need a piece of small plywood, as well as wooden or plastic slats.

The body of the figurine, which will be transported as a flower vase, is best made from an empty container. Everything here comes literally from unnecessary pools and cups to old boxes. And even if there is nothing like that, refer to the plastic film. Punch a hole, turn internal walls depression and place a pebble on the bottom so that the water flows freely during the rinse.

If you have a puzzle, you can quickly and in a few minutes make the neck and head of a bird.

In the absence of it, it will be a little more difficult for you to work with ordinary knives and manually, carving graceful curves. But if you first simplify your work and prepare a plan on the stand, you will greatly simplify the task.

It is very important that the appearance of the figurine builds beautiful bird feathers, so it is necessary to cut the planks so that they are obtained from segments of the same length.

In addition, these empty surfaces should be painted white (if you want, you can make the linen black). And if they decide to create a composition, two swans of different colors can be placed.

decorative garden garden

Once you've completed most of your work, consider the types of colors that will fit this composition.

It is very important that everything is combined in style and color. It looks very impressive if you planted flowers of the same color in a white swan, so the classic picture of this beautiful bird is over.

It is very pleasant to plant light flowers in a black swan: red or yellow. But if you don't like this idea, imagine something creative for yourself to take full advantage of your talents.

And if you like variety, then in next year in a designer flower bed, you can plant other types of flowers, and the composition will look different every time. Make a choice according to your taste, the main thing is that the plants you planted flare up for a long time and are pleasing to the eye.

And no need to plant flowers directly in the ground, you can put flower pots in the plan.

And I swear, like a garden ornament, from time to time to move from place to place.

If you follow our advice, you will definitely recognize this idea. Also, it doesn't have to be floral in the shape of a swan, you can use images of different animals.

Related video tutorials

Now, if you decide to implement the ideas described in our article, you can try it right away.

To make it more clear and understandable, take a look at the video tutorials we have selected for you. There you will find many new and interesting details about the formation of flower beds with plastic bottles.

Sent by: dive 27.03.2016, 23:27

Do not throw away empty plastic bottles. Many useful and beautiful things can be made from them. For giving, a garden and a kitchen garden these bottles are just a godsend! For example, flower beds decorated with bottles look great. Design options are varied. To get started, to get your bearings, you can watch master classes - flower beds from plastic bottles with your own hands.

The first thing to do with each bottle before work is to wash, dry and remove all labels. How to decorate a flower bed with plastic bottles? You will find out about this very soon.

Making a fence

One of the main uses of bottles in flowerbeds is fencing. In any conceived order, the bottles are placed vertically around the flower bed.

You can put bottles in the shape of an animal, for example, such a flower bed is a swan.

Bottles of the same size should be used. If they are of different colors, then it is necessary to alternate them systematically, otherwise the flower bed will look sloppy.

You can make flowers from plastic and decorate bottle fences with them. It will be very elegant.

Beautiful flowerpot

You can arrange the bottles in the shape of a flowerpot, as in the photo.

The bottle is not an environmentally friendly material, it does not decompose well in the ground. But for the garden, this disadvantage turns into a virtue. The roots of weeds cannot climb through this barrier, the earth does not dry out so quickly, the barrier is stable, it lasts a long time, and if any of its elements fails, it is not difficult to replace it.

Flowerbed from a bottle

You can make small flower beds from bottles. Their forte- mobility.

A flower bed can be lined with bottles, like a picture, and be a decoration of the garden in itself, even without flowers. Here is one of the options.

"Ladybug"

Now you can take a closer look at how to make just such a flower bed. You will need transparent bottles, which will need to be painted in red, black and white.

The size is not very big. 2 bottles need to be painted white - these are the eyes. Black bottles are needed for the head and spots, and red ones for the wings.

The flower bed should have a stone border so that the soil does not wake up. Pour it inside the flower bed, giving a semicircular shape to the body of a ladybug. Draw a diagram on the ground and, according to it, screw in the bottles, cork down.

This is what the insect should look like in the end.

Similarly, you can post any pictures. We can now consider one.

artificial lake

Here are used, painted in blue, cyan and turquoise colors, bottom halves of bottles.

The larger the lake you want to make, the more halves you will need.

Plastic bottle flower beds have become popular with the advent of this material. Craftsmen create real masterpieces in the form of animal figures from empty containers, lay out a mosaic. Summer residents are lazier just making small fences for flower beds. In any case, the flower bed is transformed, becomes brighter, takes on a specific shape.

Advantages of flower beds from plastic bottles

If it is difficult to decide whether it is necessary to make such a flower garden, you should familiarize yourself with a number of advantages of the simplest invention:

• An environmentally friendly decoration of a flower bed made of plastic bottles does not poison the air and soil. PET containers do not decompose in the ground, are resistant to sunlight and low temperatures.
• The long service life of the fences allows you to grow perennial flowers in the flower bed. The boards prevent the growth of plants outside the flower bed, and also prevent the penetration of weed roots.
• Fencing made of plastic containers reduces the rate of drying of the soil in the heat.
• If several bottles in the fence are damaged, they can be easily replaced with new containers.

Usage plastic material for arranging flower beds carries more positive qualities. Cons here is almost impossible to identify.

Advice! In order to be 100% sure of the environmental friendliness of bottles, only food containers should be used to decorate flower beds.

Preparation of materials

To make the flower bed look beautiful, the material for its fencing must be properly prepared:

To create most crafts for a flower garden from plastic bottles, the container is usually buried upside down. The elements are placed as close as possible to each other so that there are no gaps. The decorative structure is periodically poured from a watering can to wash off the accumulated dust with water.

How to make a flower bed out of plastic bottles

There are as many ideas for creating flower beds as there are summer residents. Each person comes up with his own original invention, and someone copies from the Internet.

Vertical flower bed made of plastic bottles

Plastic containers are used in small areas to create vertical flower beds. Each bottle plays the role of a flower pot. The containers are fixed with wire to a vertical support. Most often it is a fence or a wall of a building. Sometimes a support structure is specially installed for a flower bed.

There are two options for attaching bottles:

1. Horizontal. With this method of fixation, a window is cut out with scissors in the side of the plastic container for filling the soil and planting plants. Tanks in a horizontal position are fixed in rows or in a checkerboard pattern.
2. Vertical. The flower bed is created from individual pyramids. The bottom of the plastic container is cut off. A drainage hole is pierced in the cork. Each pot is covered with soil, tied with wire vertically to the support with the neck down. The first element is attached from below. Each subsequent container is inserted with its neck into the previous lower container so that the cork touches the soil. The last upper bottle is not filled with soil, but water is poured for drip irrigation. Plants are planted in windows cut out on the side wall of each bottle.

Flowerbeds from PET bottles look beautiful. They are used for vertical gardening. The disadvantage is the rapid depletion of the soil. Plants need to be fed more often, monitor watering.

Horizontal bottle placement

The unusual idea of ​​​​creating a flower bed in the form of a well involves laying bottles horizontally on cement mortar. To make the masonry even, you will need a temporary template. Any large container will play its role: a barrel, car tires stacked in a stack, or another similar structure. After the laying of the walls of the flower bed is completed, the template is removed. The resulting frame is suitable not only for growing flowers. Here you can plant low-growing shrubs.

To create a beautiful flower bed from plastic bottles for the garden, follow these steps:

• Sand is poured inside plastic containers of the same size, tightly corked. From 2 parts of sand and 1 part of cement, the solution is kneaded.
• The first row of bottles is laid out on compacted sand. It is important to align each element, otherwise all subsequent rows will begin to “move out”.
• The second and all subsequent rows are laid on cement. It is enough to lay a layer of solution 3 cm thick. The bottles are laid horizontally in a checkerboard pattern. The bottoms should be directed in one direction: outside or inside the flowerpot.
• After completing the masonry, the top row of the flower bed is poured with concrete. Shells, cones, colored pebbles, sea pebbles are embedded in a raw solution for decoration.

A template from a flower bed in the form of a well is removed carefully after the solution has solidified.

Multi-tiered flower beds

For a multi-level flower bed, the use of multi-colored bottles is especially important. Finished construction looks like a huge cake. The idea of ​​​​creation involves burying plastic containers with their necks into the ground according to the method of creating a fence, but in this case there are at least two of them, and they are installed in tiers.

To beautifully decorate a flower bed with plastic bottles, do the following steps:

• From a plastic container form a fence of the first tier. Capacities are instilled with the neck down. To prevent the fence from falling apart under the pressure of the earth, it is pulled together with a rope or wire.
• Soil is poured inside the fence and immediately they begin to dig in a plastic container of the second tier. In terms of size, the structure is made smaller, but of the same shape, for example, a circle.
• If the flower bed will consist of more levels, the procedure is repeated.

Advice! It is undesirable to make a flower bed above four levels. The design will turn out to be bulky, over time it will begin to “disperse” under the pressure of the soil.

At each level of the flower bed, flowers of the same height are planted. Moisture-loving plants are sent to the lower tier. Flowers are planted on top that do not suffer from a lack of moisture.

Hanging flower beds

By the vertical method are made hanging flower beds. Bottles play the role of pots. Plastic containers can be hung vertically or horizontally. The ropes should allow the florists to turn freely on all sides towards the sun. In each flower garden, a drainage hole is pierced with a nail. Planters are arranged so that after watering, water does not drip on the head of passing people and does not flood the structural elements of the building.

Fence for a flower bed made of plastic bottles

The simplest fence for a flower bed is a fence. The plastic container is instilled with the neck down. First, the area is leveled, markup is applied. Under the bottles dig a trench. Plastic containers are placed tightly to each other. Check that the tops of each element are at the same height. The trench is covered with soil, rammed. Substrate is poured inside the fence, flowers are planted.

Mosaic from plastic bottles

A mosaic looks beautiful from multi-colored plastic containers. In fact, the structure is an additional decoration of the flower bed. Mosaic lay out figures of flowers, insects, animals. Craftsmen create complex compositions in the form of a lake with swans, a flower meadow.

To decorate a flower bed with plastic bottles, first create a scheme. From paper, it is transferred to a site where an additional mound of loose soil has been previously made. Plastic containers are painted to the desired color to create a composition. Guided by the scheme, each bottle is immersed with its neck into the ground. Only a colorful bottom remains on the surface. Undersized flowers are planted near the mosaic so that they do not cover all the beauty.

flower bed

The technology for creating a flowerpot is similar to the method of building a well with horizontal stacking of bottles. A template is required. A large plastic florist would be a better element. To the top, it goes to the expansion, which will allow you to better extract after lining. In addition, the curly shape will give the flowerpot aesthetics. The container will have to be laid with a slight offset, exactly copying the contours of the florist.

It is better to lay the containers with the bottoms outward to create an attractive pattern. They are pre-stained. The top of the flowerpot is similarly decorated with stones. The composition of moss and cones looks beautiful.

Mini-flower beds in the form of animals and insects

There are many ideas for creating mini-flower beds. The main requirement is to give the structure an appearance that mimics an animal or insect. The element can only act as decoration or flower pot for multiple plants. Most often you can see in the photo flower beds from 5-liter plastic bottles made by a piglet, a hedgehog. Mosaics are laid out from smaller containers.

In the video, an example of designing a flower bed in the form of a swan:

Flowerbed-piggy from a plastic bottle

A beautiful pig is obtained from a five-liter bottle. A rectangular window is cut out in the side part. Two triangular petals are left in front, imitating ears. The cork will serve as a patch. Elements of the face are drawn with a marker.

Flowerbed-hedgehog from plastic bottles

To create a hedgehog, a window is cut out in the same way in the side. Draw a face with a marker. The role of thorns will be performed by green ornamental vegetation. A family of hedgehogs can be made from bottles of different sizes and beautifully placed among the greenery of a flower garden.

Flowerbed of bottles in the form of a ladybug

Insect figures are usually laid out in mosaics. From a combination of bottles dyed red, black and yellow succeed ladybug. A fence made of white plastic containers looks beautiful along the contour of the mosaic.

Ideas for decorating flower beds with plastic bottles

Conclusion

Flowerbeds made of plastic bottles are mobile. If necessary, they can be easily moved to another place. If the flower garden is no longer needed, the fence can be easily removed from the ground, returned to the landfill, from where the material was extracted.

If you want a bright strawberry bush to decorate your cottage at any time of the year, a stork to rise, daisies to turn white, and a firefly to burn in the evening, then find out how all this can be done from plastic bottles.

Broom from plastic bottles

It will certainly come in handy in the household. She can sweep not only garbage from the hut, but also collect fallen leaves, rubbish from garden paths.

To make such a strong whisk, you will need:

• 6 plastic bottles;
• scissors;
• hammer;
• cutting.

First of all, wash the bottles under warm water, remove the labels from them. Now cut off the bottom of five bottles, cut off the necks from four. Starting from the bottom, cut the canvas of the containers into strips 1.5 cm wide. For the broom to have sufficient rigidity, stop before reaching the shoulders, as shown in the photo.

Do not cut off the neck of the fifth bottle, make a fringe on it in the same way. Now put 4 bottles on top of it. Prepare the sixth differently. Cut it below the shoulders, leaving the neck.

Put this sixth bottle on the blank of five containers. Insert the stem into the neck. Now squeeze the blanks a little so that the broom becomes flatter.

The final touch remains, make a few holes with an awl in the working part of the panicle, put a wire here, fix the product on the handle. Here's how to make a broom out of plastic bottles.

How to make a stork

This is what a wonderful stork can decorate your garden, city yard.

If you still have floorboard trimmings after building a house or repairing, they will come in handy. Here is what you need to prepare in addition to them:

• plastic milk bottles;
• green and red electrical tape;
• self-tapping screws;
• block of wood;
• 2 metal rods;
• glue gun;
• eyes for toys.

Cut off the bottom and neck of the bottles. From the resulting canvas, make four feathers. To do this, first cut the bottle on the side, then divide the resulting canvas into rectangles with scissors. Round the bottom of each and frame the feathers with a fringe by cutting the edges of the blanks.

Draw a stork template on paper or cardboard, attach it to the board, outline it, cut it out with a jigsaw. Draw a wing separately, also cut out 2 such details, screw them to the stork's body with self-tapping screws.

Leave the bird's beak unformed for now, starting from the head, glue the body and wings of the stork with blanks from plastic bottles. Note that the plumage of the bird on the head is different from the plumage on the body. For the head, shorter blanks are made.

To decorate the wings, you need to make not only white, but also black feathers. You will make the last ones by taking a shampoo bottle of that color. The same, but long, you will need when decorating the stork's tail.

Wrap red tape around the bird's beak. Glue the eyes, attach two metal rods in place of the legs. Fix their lower part on the bar.

Here's how to make a stork so as not to spend extra money on buying such a garden figurine.

Decorative flower beds - the first idea

Beautifully decorated flower girls are pleasing to the eye. Plastic bottles will also help in their creation. If you do not have a summer cottage, you can implement the idea below in the summer on the local area in the city, on your balcony and even on the windowsill.

This flower bed-container is also made of plastic containers, but rectangular in shape. Prepare the following for work:

• 3-4 plastic bottles;
• awl;
• scissors;
• glue;
• white paint.

Cut off the necks and sides of two bottles, leaving the "sides". Match 2 containers, glue the place of their connection as shown in the photo.

Similar plastic flower beds may be based on not two, but more bottles. Then the middle elements of the flower garden are cut out without "sides".

Now you need to make holes in the bottom of the blanks with an awl to drain excess water. If such a decorative flower bed will be at home, then you need to put it on a pallet or tray.

A beautiful fence is also cut out of plastic bottles. Its vertical fragments have a width of 4 cm, and the height should be 5-7 cm more than the height of the sides of the containers. The upper part of such a picket fence is pointed, the lower one is rounded.

Now cut the rest of the bottles into long strips. Attach them horizontally to a vertically located picket fence, glue. If the bottles are transparent, first paint them white or any other color, let the paint dry, and then cut out the elements of the fence. After that, glue it to the flower girl.

You can leave the flower bed like this or decorate it with flowers made from plastic bottles. When filling containers at the bottom, first put drainage in the form of small pebbles, then a small layer of coarse sand, and then fill in fertile soil.

The second option of a flower bed made of plastic bottles

This idea will certainly appeal to lovers of classic forms. Cut off the necks of two eggplants, but do not throw them away. The photo shows how they need to be shaped so that these parts turn into the legs of a mobile flower bed.

At the bottles themselves, cut out the sides, but leave along the side near the bottom and near the shoulders. Slide these parts of the two containers one into the other, remembering to secure with glue. Use it to attach the legs.

It remains to cover your creation with paint, let it dry, fill it with a small layer of drainage, light soil and plant your favorite plants.

When purchasing glue, see if it is suitable for plastic. The same applies to paint, because not every one fits well on this material.

Crafts for giving

After winter, there are still few bright colors in the garden. These naughty plastic bottle crafts will help fill this gap. These funny little mice will become both small flower beds and garden decoration.

For this garden craft you will need:

• plastic bottles;
• acrylic paints;
• scissors;
• glue;
• fishing line;
• buttons;
• felt-tip pen.

Lay the plastic bottle horizontally, cut off the side of it, which is now the top of the container, but don't throw it away just yet. Draw 2 ears and a tail on it.

Color the tail and body of a mouse from a plastic bottle in grey colour and the ears are pink. Glue all the details in place, use 2 dark buttons for the eyes. Draw a mouth for the craft, glue pieces of fishing line on the nose that will become the mustache of the toy. After that, it can be used for its intended purpose.

The next flower garden for giving is done in almost the same way. Also cut out the side of the bottle, ears, tail for these funny piglets, then paint them in pink color. When the paint dries, fill the container with earth and plant flowers.

There are crafts for giving that look good during the day, and even more spectacular - at dusk, due to the fact that a neon lamp is lit inside.

Here are the materials needed for work:

• green plastic bottle;
• black or green wire;
• yellow paper;
• gold decorative wire;
• neon lamp;
• scissors.

Wash the bottle with warm water, remove the label. Now cut 3 strips of wire, twist them on the container as shown in the photo. The bottom of the wire will become the legs of the firefly, and the other parts of the wire will be draped with a rectangle cut out of yellow paper.

Draw wings on cardboard, cut them out and glue them on the back of the insect. Glue 2 beads to the lid, which will become the eyes of the firefly. Twist the golden wire in the form of his antennae. Bend the neon stick to light up, insert inside the container, secure it upper part inside the neck with tape.

Here's how to make a firefly out of a plastic bottle. It will look beautiful next to decorative plants, also made by hand.

Strawberries and flowers from plastic bottles

These beautiful daisies will turn out when using empty containers from under dairy products. Of course, first you need to wash them well and remove the labels. To make one flower, put in front of you:

• 3 white plastic bottles;
• cover;
• scissors;
• wire;
• felt-tip pen.

Cut off the lower parts from the containers; we will not need them when making flowers from plastic bottles.

Leave the neck on one bottle, cut it off from the other two.

Lid orange color perfect for the center of a flower. It will only be necessary to erase the numbers indicating the date of production and the expiration date of the product. This is easy to do with acetone or paint thinner.

Now make 8 petals on each blank. To make them the same, use a stencil or first outline them with a felt-tip pen, and then cut them out. Then it will also need to be erased. Put on the first blank, on which the neck is preserved, the second, then the third. Remove the petals first to make the flower more voluminous. Close the lid.

Using a drill or a hot nail, make 2 holes in the lid, thread a soft wire through them, wind it on a hard one, which will become the stem of the plant. That can be wrapped with green electrical tape or painted in that color. It remains to cut and fix the leaves from the green bottle on the trunk, make 2 more daisies, and the hand-made flowers are ready.

Such bright juicy berries will also be a wonderful decoration for a summer cottage at any time of the year.

This strawberry bush is made very simply. The bottom is cut off from the bottle, set aside. The middle part of the container is not useful, it and the neck must be cut off and thrown away. But the remaining fragment from the neck to the bottom of the shoulders, insert into the bottom of the container. 2 more berries are also made, or as many as you wish to create.

Now these blanks need to be painted red, and when this tone dries, make dots of white or dark color.

A sepal is cut out of a green bottle and put on the recesses of the berry. In his and her center with a drill or with a nail and hammer, you need to make a hole, combine them and thread the wire. On the other hand, leaves cut from a green plastic bottle are put on it. Below the wires are connected and the lower edge is stuck into the ground. As a result, what a wonderful craft for the garden you will get!

There are others interesting ideas for giving. From the video you will learn what else you can make flowers from plastic bottles:

This video shows how to make bees from small plastic bottles:

The following master class will teach you how to create country figures of storks from the same material:

Well-groomed and bright flower garden- a great decoration for any personal plot or flower beds. During the arrangement landscape design it is necessary to use any readily available improvised materials. For example, create your own beautiful flower beds from plastic bottles for ground flowers. With the help of recyclables, you can very easily decorate a nondescript fence or wall to do something unusual appearance hanging planter, flower garden fencing and even a full-fledged flowerpot. However, before starting work, you should first choose a flower bed model, as well as familiarize yourself with the technology for its manufacture.

The use of plastic containers in the arrangement of a flower garden has several advantages.

Perhaps the most indisputable plus is the ease of accessibility. consumable. Absolutely every family in large or small quantities buys cooling drinks, drinking water or household chemicals in bottles that are made of polyvinyl chloride.

Many people simply throw away the container after using the product, but some of the craftsmen improvise - create amazing flower beds from plastic bottles without investing a dime of extra money. Do unusual flower garden with their own hands, anyone who has a great desire and due patience can do it.

Bottle flower beds have other features that explain the popularity of this "know-how" among gardeners and summer residents:

With your own hands, you can easily make many options for a small fence for a flower bed out of plastic bottles. The choice is limited only by the size of the site and the imagination of the performer. The originality of the garden can be emphasized by multi-tiered and hanging compositions, as well as flower beds in the form of various animals or figurines.

Fences for flower beds

A fence made of bottles can be made horizontal or vertical method. The second option is considered the simplest, it involves burying the container with the neck down into the ground. This method is best suited when creating flower beds, which are distinguished by a complex shape, as well as when delimiting a plot into beds.

A kind of border made of plastic containers for a flower bed will allow you to realize the most daring idea of ​​the designer. It can be a flower garden in the shape of a crocodile, a bright butterfly, a pond with swans, stars and much more.

This creation process can be broken down into the following steps:

1. Sketch development. We display on paper a plan for arranging bottles - their color, quantity and shape of the future flower garden.
2. Material preparation. We clean the bottles, tear off all the labels, thoroughly wash and dry. If necessary, you can paint the container in bright colors.
3. Plot marking. We designate a contour on the ground, for example, with sand.
4. Fence Installation. We dig a shallow ditch along the perimeter of the flower bed, the width of which should be equal to the thickness of the bottles. Fill the container with pebbles or sand. We consistently dig the bottles into the ground, joining them very tightly with each other.

Despite the simplicity of execution, the result will please only with a neat and well-groomed appearance of the created flower bed.

By placing the bottles horizontally, you get a full-fledged flowerpot that can be used for planting flowers or small shrubs. Before you start lining the flower bed with plastic containers, you need to choose a support for rigidity: a large tire, a barrel without a bottom, or a polycarbonate sheet.

Production order:

As soon as the fence made of plastic containers for the flower bed is ready, we place a drainage layer on its bottom, and pour fertile soil on top. It is recommended to decorate the structure from the sides with moss, shells or cones.

The original and rather unusual decoration of the suburban area are hanging flower beds made of plastic. They are used to decorate a nondescript wall, space zoning and create the effect of a hedge.

There are two main implementation methods, as in the previous case: vertical and horizontal suspension.

Creating "hanging gardens" with your own hands with horizontal suspension:

1. Mark the contour on the bottle with a felt-tip pen.
2. Cut out a hole for planting flowers.
3. We make two pairs of holes and thread a fishing line or strong thread through them.
4. We adjust the length and fix it by installing the ring at the bottom and tightly tightening the knot.

In such containers, you can plant herbs, undersized plants or ampelous flowers.

Vertical flower beds made of plastic containers are made using a similar technology:

1. We cut two holes on the side of the bottle, leaving a bowl below, into which the soil will be poured.
2. We do at the base of the neck through hole and thread a cord through this hole.
3. We adjust the length of the rope, hang the pot on a metal hook or fix it on a horizontal bar.

To decorate a gazebo or equip a patio, you can use single planters. To do this, we need: a buckle and a crochet hook, stickers, spray paint, a stationery knife, a 1.5 liter bottle.

Sequencing:

1. Cut off the bottom of the bottle, align the edges with scissors.
2. We drill holes in the resulting glass, making a small indent from the edge (5-10 mm). The distance between the holes should be 12-14 mm.
3. We repaint the pots or decorate it to your taste. Leave the workpiece for some time to dry completely.
4. We tie the upper edge of the planter with yarn, using contrasting colors for this.
5. We pass a dense thread through the hole or we tie the rope ourselves.
6. We place the flower with the pot in the finished pots and hang the product.

From flower pots with muzzles of various fairy-tale animals, you can decorate a playground. It is recommended to involve your little helpers in creating such a fake with your own hands - children will take part in decorating the garden with great enthusiasm. Children can be entrusted with decorating plant pots or choosing images.

Multi-tiered flower bed

A multi-level composition resembles a pyramid in shape, which consists of several tiers. The lower step has the largest diameter, and the upper one has the smallest. The number of tiers is usually chosen arbitrarily, but it is worth considering the variety of colors for planting and the dimensions of the structure.

The flower bed is made in the following order

1. We select and sort bottles. It is desirable that the capacity of the same displacement is used in one tier.
2. Remove the labels and wash the container well.
3. We determine the boundaries of the flower garden and perform the markings corresponding to them.
4. We form a ditch of a large circle along the contour. The depth of the trench should be between 8 and 10 cm.
5. We install the first tier from plastic. To strengthen the structure, you can drag the fence with wire.
6. We pour the soil inside the barrier and tamp it well in the center.
7. We mark the border of the second tier, making a circle of smaller diameter.
8. We install the bottles, gradually forming the next step.
9. We pour the earth and erect the third tier in a similar way.

Some nuances should be taken into account when building a multi-tiered flower garden:

1. It is recommended to plant flowers of the same size in one tier.
2. On the lower tiers, it is best to arrange plants of dark shades, and light ones - higher.
3. Plants that tolerate well high humidity must be planted on the lower step. After rain or watering, part of the water flows down and accumulates there. Moisture-loving plants include: irises, geraniums, astilbes, forget-me-nots, primroses and violets.
4. Asters, marigolds, nasturtium and kosmeya feel best at the top of the composition. These plants are able to easily tolerate the lack of moisture.
5. It is very important to harmoniously distribute color accents. For example, contrasting two-color flower beds look very nice. With the transition of color from dark to light and from cold to warm, the compositions are very effective. For example: turquoise - purple - red or blue - orange - yellow.

It is advisable to select plants that bloom at the same time. Information on the timing of flowering and planting can be found on the seed packaging.

Paint selection

In "plastic craft" You need to be very careful when choosing colors.. It is very important that your product looks high quality and spectacular, the coating should not peel off from the rain and fade in the sun. To do this, you should choose paints that have an acrylic composition or use stained glass paints - the most expensive, but very high-quality material for decorating any plastic crafts.