How to level the floor in different rooms. Basic floor leveling. Leveling for laying laminate flooring

Do-it-yourself clothes hanger is a fruitful idea. Theater begins with a hanger; house too. In the sense of spirit, atmosphere, "energy". The reason is simple: the first thing a guest looks for is where to hang outerwear. And if the hanger is clearly home-made, but comfortable, stable and durable, a positive reputation for the owner is provided.

The second argument for making a hanger with your own hands is prosaic: purchase prices are clearly disproportionate to production costs. A homemade clothes hanger will save you quite a visible amount in the budget. It is not difficult to make it, it will take a little material, and waste from repairs will also go into business. The tool in most cases can be dispensed with by hand.

These factors are especially felt if a floor hanger fits in the hallway. In addition, it can also serve as a dryer if its design is frame, see below, because. On such hangers, it is convenient to hang clothes on hangers, and the hanger itself moves away from the wall. If it was possible to shield the house, then a floor hanger is the best option. Price floor hangers significantly higher than the wall ones, but there is nothing in the design that would not allow you to make a floor hanger yourself.

On the floor or on the wall?

It has already been said enough to make a choice, as long as there is enough floor space. However, let's finally compare how attractive a hanger is in a floor-type hallway:

Clothes hung on hangers dry faster, do not stretch; the collar and lining are not torn.
On a hanger approx. 1.5 m fits a seasonal set of clothes for the whole family, which will save on the closet and the area under it.
A shoe rack is naturally attached to the floor hanger, which simplifies the work of equipping the hallway and saves its area.
With correctly calculated dimensions of the hanger, neither the wall from the clothes nor the clothes against the wall are damaged.
The mobility of the hanger does not interfere with the rearrangement of furniture; after moving the hanger, it is not necessary to seal the mounting holes in the wall.

However, floor hangers are different, and not all of them are most suitable for living quarters. For example, for orders (from the old Russian “order” - office, office, office) floor lamp hangers, pos. 1-4 in the figure, it is inconvenient to hang clothes on hangers. Because of small area they are rolled supports, especially loaded with wet winter clothes. To emphasize the functional inferiority of the product, such hangers are called hangers, and they often go on sale under this name.

The best option is the same theatrical wardrobe frame hanger, pos. 5. In the version for residential premises, it is supplemented with shelves for hats, shoes and gloves / scarves; perhaps an additional tie rod, pos. 6. Disadvantage - the "legs" of the hanger get underfoot. In an attempt to get rid of it, hangers were invented - frames on a stand, pos. 7, but generally speaking, they fell even more than the orderly ones hung up. Another option is a hanger-frame without legs, leaning against the wall; we will remember this one. There are also folding frame hangers, but in everyday life they have almost no advantages.

If in the hallway with a place is generally tight, then a wall hanger is still more suitable. Simple wall hanger-sconce, pos. 1 in Fig., is as compact as possible, but not at all more convenient than the order, except that it does not fall from the next jacket to one side. Hanger-shelf, pos. 2 won't fall off if it's attached properly, and neither will hats/caps, but the wall and clothes rub against each other.

Wall hanger panel, pos. 3, saves the wall, but not the clothes. Most of all, leather things wear out on such hangers. Tanners jokingly advise: how, they say, to distinguish a sheepskin coat from full grain leather from it from reverse? The first, with everyday use of a hanger-panel, loses its appearance in 2 winters, and the second - in half a winter. Given the cost of genuine leather products, this is no good. Therefore, hangers-panels on the wall for expensive things are often supplied upholstered, pos. 4. As for wall hangers with an openwork shield, pos. 5, then in this case its meaning is only decorative: it does not protect either things or walls.

There are also floor hangers-panels with a stand, for example. in the form of a cabinet, chest or chest, pos. 1 in fig. on right. This is not the best option: someone will once put something on the lid, and with the clothes removed from the hanger it will be whisked to the floor. Much more practical are floor hangers-panels with a bench, pos. 2. The flower under the seat is a matter of taste of the owners, if only he survives there, but the shoe box or chest for accessories to care for her in the banquette drawer is the place.

Clothes and keys

Regarding hangers-panels, an amateur master appears additional opportunity, namely: to provide such a sidewall at the farthest from front door edge. Perhaps not reaching the bottom, with a bevel or notch. The factory ones do not do this: the hanger should be designed for clothes sticking out from the side. One sidewall almost does not interfere with this, but it is not known how the hanger will stand with the buyer, and it is unprofitable to make right and left hangers.

What gives such an addition? Place for the housekeeper, invisible from the threshold. In the same place, on the side, there may be a dressing table or cabinet, but the main thing is that the master's keys will not catch the eye of a casual visitor, and they are in sight, according to criminologists, a serious factor in spontaneous illegal actions, without which, i.e. temptation, the visit of a not entirely trustworthy subject would have done well both for the owners and for him. You can, of course, luxuriously decorated and with secret constipation, but this is a lot of work and material costs. And so - a simple plank with hooks will do. Or just hooks screwed to the sidewall outside of the stowage section.

We will assume that a suitable design has already been selected, and let's take a look at how to make a hanger. Preferably wooden: the material is noble, natural, easy to process. Let's not forget other versions; more convenient in some cases. Let's start with floor hangers as the most functional.

floor standing

Lovers of crafting from the heart, having a milling tool for wood, can immediately take up the floor frame hanger with legs. Made of small-layer hardwood (oak, beech, hornbeam, walnut, birch), it looks chic, and it will take only 360 mm of the floor in width.

A suit hanger works well as a prototype, you just need to make it higher and move the trouser bar up so that you can hang coat hangers on it. Instead of a tie rod and handles, a shelf can be installed, and a shoe shelf is mounted below. Drawings of such a hanger are shown in Fig.:

With the indicated other dimensions, the structural and overall width (dimensions 430 and 460 respectively) can be increased by 1-1.4 m without compromising strength and stability, i.e. the hanger will be already a family width up to more than 1.8 m.

About hooks and trempels

Bags, umbrellas, scarves are also left on the hanger, and a bachelor can also have a skirt with lingerie there. Sometimes life is life. It is also more convenient to hang clothes on hooks for a short time. Therefore, in frame hangers, sometimes runner hooks are put on the main bar (the former trouser bar in Fig; height 1360). They or hangers, depending on the need, are shifted to the side in a crowd. But the hook-runners under the fingers turn out at the most inopportune moment. In a hanger of this design and similar ones, the problem is solved simply: the main bar is for hangers, and fixed hooks are attached to the top board.

Pipes and profiles

Original hangers are obtained from round or shaped metal or plastic pipes, see fig. However, despite all the design tricks, their organic vices do not go anywhere. The same as the orderly hung. But high labor intensity is added: in order to hide the connecting nodes, you have to strain both your arms and your head.

It is better to make a square base of a floor lamp hanger from pipes. With the same withdrawn floor area, the distance between the support points increases by 1.4 times. If the base is still heavier, then the hanger up to 1.7 m high turns into a full-fledged hanger. 60 mm sewer pipes are most suitable.

A short master class in pictures on making the base of a floor hanger from pipes is shown on the next. rice. Pipe sections - 150-300 mm each, depending on how much floor can be given to the hanger. In addition to them, you will need 3 straight tees, 4 right angles and 4 plugs. Connections - on glue for propylene or PVC, depending on the pipe material. Weighting - sand or small gravel.

One of the comments on original design begins with a question like this: “Why couldn’t you just solder?”. Judging by the fact that later in the same comment, 90 angles with a clear claim to professionalism are called bends (plumbing bends are oblique tees), another 2-3 and the same number of exclamation points suggest themselves to the question mark.

Nevertheless, the author of the product, albeit not knowing plumbing terminology, solved the problem in a completely engineering way. The hanger does not need tight joints, and a tube of glue will cost much cheaper than renting a soldering iron for propylene. Which, moreover, you need to learn how to use, spoiling a fraction of the material. For greater reliability, you can reinforce the connections with phosphated (black) self-tapping screws: on black, their heads are not visible, and the strength of the hanger will not decrease.

Note: the pommel in the original design is also made of pipes, but, frankly, its design is not the same ... It would be better to drill inclined holes in the rack and insert some strong pins into them using the same glue; wooden, metal.

simple frame

A frame hanger made of pipes can be without legs, just leaning against the wall with an inclination. However, its slope must be negative. There must be at least 350 mm between the wall and the clothes on the hangers. If the slope of the frame is positive (the upper crossbar is adjacent to the wall), then the lower one will "leave" from the plinth by 500-600 mm. In a small hallway, this is a serious inconvenience. In addition, they will either cling to the lower crossbar with their feet and it will beat the floor, or it will have to be fixed to the floor, and this is really bad: any violation of the flooring is fraught with complex and expensive emergency repairs. Have you seen furniture for sale that needs to be screwed to the floor? Is that a special purpose, for example. rack. And then, they also try to get by with fastenings to the walls and, in extreme cases, to the ceiling.

A diagram of a frame hanger with a negative slope of pipes is shown in fig. The materials are the same: line segments sewer pipes 60 mm, 90 angles and straight tees. Withdrawn usable floor area - zero. At the bottom there can be a shoe rack or a banquette. For fastening to the wall, in order not to drill a lot and do without expensive collet anchors, it is better to take a couple more tees: with their help, the holding beams - extensions are attached to the wall with a pair of self-tapping screws in dowels each.

wall

Simple hangers-panels do not require special analysis. How to make a wooden wall hanger, see for example. video.

Video: do-it-yourself wall hanger made of wood

Here we recall, firstly, the sconce hanger. Foldable, it can be very useful if a large company has gathered or the kids have returned from the yard at least squeeze it.

An example of such a structure is shown on the right in Fig. However, its creators were clearly guided by the principle: “Consumption is the basis of turnover Money". The outer (folded) side of the flap bar is inactive and a locking mechanism is needed. And a separate hanger for every day.

Meanwhile, folding wall hangers have been known since ancient Egypt. In the local climate, outerwear was worn occasionally, in bad weather, but after wearing it, it was necessary to dry it. There was no point in keeping a separate hanger for this in the regions where it rains and cold once a year, not every year, so they came up with the one on the right in Fig.

When folded, the compact wall hanger of the Egyptians was fixed with a cypress stick. Now, of course, you can put a ball retainer or just a hook. The main thing is that the hook hooks should be in 3/4 of the circle, then nothing will fall off them even with the bar folded back. And without need, the whole hanger looks like just a stick on the wall; you can hang bags, umbrellas, keys on hooks.

More about hooks

original wooden hanger can be made without metal at all, not counting fasteners. Do not rush to throw away the New Year's pine or Christmas tree (only the blanks will need to be turned upside down):

Video: original do-it-yourself wooden hanger

Best of all, such a hanger will look in the country, in a bar or frame house. Depending on the interior design - and in a city apartment. She will go to the bathhouse perfectly: the touch of steamed skin on metal is unpleasant, and to some extent even traumatic.

Hangers in the nursery

Probably, all children scatter wearable things. There is no need to especially scold them for this: without knowing chaos within reasonable limits, you will not accustom yourself to order. Who is against - answer Friday's question to Robinson Crusoe: "Why doesn't God kill the devil?"

However, teaching children to handle things properly is necessary. Only a children's hanger, so as not to cause obvious psychological rejection, should look somewhat disordered. It is also highly desirable that the child associates it with a favorite game or hobby. Examples of wall hangers in the nursery of the "game / hobby" type are given in pos. 1 and 2 fig.

A universal method of this kind is a tree hanger, pos. 3. In the contour of a tree, as in any fractal structure, order and chaos interact and complement each other, creating a harmonious whole. Do not forget to just make the tree stronger, for example. from plywood from 12 mm, and, as it should, with a step of no more than 250-300 mm, attach to the wall with self-tapping screws from 6 mm in propylene dowels. A tree, after all, to climb on it.

Floor hangers in the nursery are undesirable for the same reason: well, they will climb anyway and crash. Therefore, if you already want a floor hanger in the nursery, you need to make one that you can’t fit on, which can be seen in pos. 4 and 5.

About cutting plywood

In any case, parents face problems that small ones don’t care about yet: material consumption and labor intensity. It is no longer easy to draw a complex contour along a grid on a solid sheet of plywood, then it must be accurately cut out, which is even more difficult. And in the end it turns out that 60% or 80% of the material went to waste, no longer suitable for anything. It is necessary, on the contrary, to make a children's tree hanger from waste. Or cut a denser whole sheet.

The method for this has long been known: element-by-element cutting and assembly. If the tree is plywood, for the full strength of the finished product, each part is recruited from 2 layers, leaving resp. folds and grooves, see fig. Fragments of blanks are assembled on PVA glue, wood glue or Express (liquid nails). If the assembly is on PVA, the fragments must be additionally fastened with small nails with a snake in increments of 100-150 mm with an indent from the edges of 30-40 mm.

They assemble a tree hanger on the same adhesives, but now each connection must be fastened with self-tapping wood screws with an envelope. Then the gaps and fastener heads (they must be drowned during assembly) are rubbed with putty from sawdust of the same plywood on PVA. Such a tree, even without painting, only under varnish, will look solid.

Note: just in case, we recall that before assembly, all the wooden parts of any wooden hanger must be sanded with fine sandpaper and treated with a water-polymer emulsion or PVA diluted with water three to five times. After impregnation, before further work, a technological break is made until the part is completely dry (1-3 days, depending on its size).

And one last thing about hooks

In the illustrations above, you most likely noticed curved wooden hooks and other hanger details. It is quite possible to make them at home. In production, dense, small-layer, defect-free wood or waterproof birch plywood (grade BS) is bent heated with steaming or dry, but for homework these methods are too complicated. Only bamboo is more or less simply steamed: the workpiece is boiled for half an hour or an hour in rapidly boiling water, after which it is bent by hand. In case of bending according to the template, the workpiece must be fastened to it quickly, before it has cooled down, with a wide cotton braid or a strip of natural tarpaulin.

At home, it is easier to cut blanks of the required configuration from a sheet of plywood (any) or MDF of the desired thickness, or, twice or four times as many in quantity, from thin sheet material, in order to then gain as much thickness as required. Cut with a finishing allowance of approx. 1 mm. The cut blanks are tightly pulled together in a package in a carpenter's vice or in a locksmith's through gaskets made of thick plywood and processed with a rasp on wood to size, and then with a clean sandpaper. One rasp is enough, with flat and semicircular working surfaces, see fig.

The workpieces are assembled into parts in the manner described above. The end surfaces, if you need to hide the layered structure of plywood, are sealed with strips of self-adhesive film under the tree. After that, the part is varnished twice or thrice with water-based acrylic varnish; nitrolac can ruin the self-adhesive. It is not worth edging (edging) with a plastic furniture edge: you need to accurately select the groove for the edge anchor, which requires a milling machine, but on curved surfaces of large curvature and short length, the edge still does not hold well. And the details pasted over with self-adhesive, under varnish, from solid wood, even the master cabinetmaker will not immediately distinguish.

How to make a wooden hanger with your own hands? It's very simple, we'll show you how. It would seem, what is a hanger in the house? Almost no one notices it, although it is quite a weighty and functional item. You will be surprised how you can improve it, and even make it yourself. Special skills are not required there, so anyone can do it.

Materials for work: what kind of wood to make a hanger

Depending on the type of hanger, we may need different materials for work. There is a general handy list that will be useful enough for any of the jobs in this category.
The arsenal of tools looks something like this:

The material from which the hanger is made.
Self-tapping screws.
Screwdriver.
Saw grinder, with which you can cut the desired parts of the hanger.
Dowels, if the structure is wall-mounted.
Screwdriver or drill (best electric).
Level, tape measure, pencil.
Sandpaper for surface cleaning.
Hooks.

Do-it-yourself outdoor wooden hanger

Wooden things have always been of high quality and durable, as well as useful in everyday life. This also applies to hangers, so we will now try to build a wooden floor hanger with our own hands.
This work will not take us much time. It will take approximately 20 free minutes, as well as all the necessary materials.

To create a wooden floor hanger, we need:

Six knees (copper).
Four tees (copper).
Four plugs (must be the same inlet diameter).
Wooden round stick of the same diameter. The total length should be 5.3 meters, cut into pieces: 2 pieces of 125 cm, two more of 70 cm, 4 parts of 20 cm, and the last 6 pieces of 10 centimeters each.

The workflow is very simple. Following the drawing plan, we must assemble all the structural elements. To facilitate the task, they are marked in the figure with letters.

"A" - 125cm.
"B" - 70cm.
"C" - 20cm.
"D" - 10 cm.

To further secure our floor hanger, use wood glue. Copper inserts will look interesting, which, on the one hand, will attract attention, and on the other hand, will be quite strong in operation.

DIY wooden hanger

An integral part of any corridor, as well as an item that is simply necessary in every apartment.

You can build a wall hanger yourself using all the necessary tools. The material option can be different, wood is the best of course. In the "cheaper" option, you can use chipboard.

Among the tools that we will definitely need are:

Screwdriver or screwdriver.
Drill.
Drill set.
Roulette with a pencil.
Hooks.

It is done very simply - just measure the desired distance and drill hooks to the board, and then hang the finished hanger on the wall. But there is more interesting options such crafts.

Wall hanger made of hammers

In this craft, we will need everything the same as in the previous version, only instead of hooks we will use old hammers, from which we will need to cut off the handle, leaving a short end, which we will attach to the board.

Working process:

Approximate period of time for which it is realistic to do wall hanger about 2-3 hours (this is with a shelf).

Extraordinary ideas for a wooden hanger

Floor and wall hangers are considered classics, but when you're in the mood for something out of the ordinary or creative, you can consider the following designs.

Master class "Hanger made of real wood"

By the word "tree" is meant not only wooden material(board), namely pieces of real natural wood. Oak chocks are best suited for this work, perhaps even with knots that will serve perfectly instead of banal hooks.

Working process:

The hanger will undoubtedly attract attention, as well as brighten up the boring atmosphere of the room. Most often, this option is placed in a country house or in the country, less often in apartments or mansions.

Photo of wooden hangers in the interior

As you can see, you can make a wooden wall or floor hanger - for clothes or jewelry, for children and adults, for a dressing room or for a hallway. It could be both a classic and some kind of unusual wooden hanger - from skis, hammers, old things, a fence or doors, from pallets, and so on. The main thing is to connect your imagination, and for inspiration, I suggest looking at photos of various wooden hangers that you can make yourself.

We can conclude that there are a lot of options for hangers, as well as ideas for their implementation, and each of them is unique in its own way. Therefore, choose which of the ideas is best suited to your home and start making your own masterpiece. Drawings and improvised materials will help you with this. The main thing to have original idea and the mood to embody it.

One of the convenient ways to store clothes is a floor hanger. You can put it at the entrance and leave outerwear here. Other models are more suitable for bedrooms, dressing rooms, children's rooms.

Types of floor hangers and their location

Some types of floor hangers are placed in certain rooms. For example, hangers for outerwear are placed in the hallway near the door. This is convenient: you can immediately get rid of clothes. The floor hanger-rack for hangers is more versatile. Such products can be placed in the corridor, in the dressing room, even in the nursery or bedroom. They accommodate a large number of clothes and they can replace a wardrobe.

Standing hangers for suits, shirts and trousers are most often “registered” in bedrooms or nurseries (if the child is a schoolboy). This is where we usually dress before leaving the house. Hangers and chairs are also placed there. This is, in fact, one of the options for suit hangers. Just the legs and stops took the shape of the seat.

What materials are they made from

Floor hangers are most often made of metal or wood. Both of these materials are strong, ductile, durable and relatively inexpensive. Some parts - plugs, parts of hooks - can be made of plastic.

Most often you can see floor hangers made of metal and wood.

Plastic inserts are more common on lower cost metal hangers. If not elements of the supporting structure are made of plastic, this is not bad and you can buy such floor hangers without hesitation. If the elements of the supporting structure are made of plastic, it is better to look for another model.

Metal hangers

The largest selection of floor hangers made of metal. They are usually made from thin-walled round or square section. The metal used is most often black, covered with a protective coating. It can be paint (most often - powder coating), nickel plating, chrome plating. AT last years a new protective coating appeared - a film made of plastic (PVA). This is also a good option, since the film is impervious to moisture and air. It is easy to care for such products, as the surface is smooth, without pores.

If the floor hanger will serve to accommodate heavy winter clothes, pay attention to the thickness of the metal when choosing. The minimum in this case is 1 mm. If the pipe wall thickness is not indicated in the product description, the wall is most likely very thin and suitable for light clothing. Indirect signs that will confirm your guesses are the weight of the product and the price.

Wooden

Wooden hangers can be carved from solid wood, or can be prefabricated. The first option is much more expensive. Teams are 2-3 times cheaper, but they do not differ too much in appearance. The presence of joints in products of normal quality is hardly noticeable, so with a limited budget it is quite possible to purchase economy class products.

Wooden floor hangers are well polished, coated with a protective coating. Usually varnish or oil is used. The varnish creates a protective film on the surface, so it is easy to care for such products. Oils for wood do not create a protective film, but protect no worse. When processed with oil, the structure of the wood is clearly visible - all the fibers, the pattern.

Standing clothes hangers in the hallway

Floor hangers for outerwear in the hallway most often represent a rod, on which hooks for clothes of different lengths and shapes are planted around at different heights. For stability, the design is equipped with a round (rarely square) weighted base. They can be made from wood or metal.

The height of the floor rack is 150 cm and above, and the base is a circle with a diameter of 35-45 cm. In order for the hanger to be stable, you need to pay attention to the fact that the lower part is weighted. And anyway, such designs require careful attention: you need to hang clothes evenly. Otherwise, the hanger may fall.

There are floor hangers for outerwear of this type, but made differently. Several pipes or metal strips are bent with a certain radius. Wherein top part is smaller than the bottom one. This design is more stable, but requires more space, which is not always possible in a small hallway.

Clothes hanger racks

A hanger rack for clothes on a coat hanger is a handy thing if there is not enough space in the closets. They consist of a rectangular base, one or two cross-tubes, on which hangers with clothes are hung.

Hangers-racks are made of metal and wood. There are metal pipes, there are forged ones. Some models of metal racks for clothes have adjustable height. For long clothes, their rack can be raised higher. The maximum height is 150 cm. For short clothes, you can put it at a height of 80-90 cm. This is the minimum height, but there are also intermediate positions.

In some cases, a floor hanger on wheels is useful. It is easy to move from place to place without removing hung clothes. There are children's models of floor hangers of this type. They differ only in height and more "cheerful" colors. Even children's floor hangers can be made of plastic. Children's clothing does not weigh that much, so the strength of the plastic is more than enough. And for the price, plastic floor hangers are the most inexpensive.

Folding models - an outlet in case of receiving guests

For those who receive guests in in large numbers it can be problematic to place their outerwear. For such cases, there is a folding rack for coat hangers for outerwear. When folded, it takes up very little space and can be stored in a pantry.

Floor suit hanger

The problem of storing a business suit is easily solved with the purchase of a special floor hanger. It is somewhat similar to racks, only with special hangers for a jacket and a crossbar for trousers.

There are stands for a suit made of wood, metal and plastic. Plastic in this case is not bad: a large load is not expected, so the strength of modern plastics is more than enough.

If we talk about useful options, this is a shelf or a box. It is convenient to store business trifles in it: glasses, cufflinks, wallet, car keys, etc.

They put floor hangers for a suit, usually in the bedroom, in the dressing room. It may be convenient to have such a device in the office. There are different models, you can choose for any style of interior. And some options look like a designer decoration themselves.

Hanger-chair and hanger-bedside table

There are quite unusual models of hangers. They are combined with pieces of furniture. For example, there is a chair hanger. The models are different: with a hanger for a suit, just a bar for hangers or with a rack for outerwear. For small apartments, this is a very good option. It takes up as much space as a regular chair or bench, and also serves to store clothes.

Floor hanger with chair and bedside table - for full use of the hallway space

Another option: a nightstand with a hanger. The lower part of such a floor hanger is much heavier than its upper half, so it will not tip over from a couple of coats. The second plus of such furniture is the optimal use of space. The trouble with all floor hangers is that the lower 50-60 cm remain unused. In the case of a coat rack, this is not the case. It's another one good way rational use of space for small hallways.

Coming home, the first thing we do is take off our outerwear and hang it in a closet or on a hanger. The latter option has some significant advantages: it takes up little space, provides quick access to things, is easy to install, and is suitable for corridors of various shapes and sizes.

Due to the simplicity of the design, it is not at all difficult to build a hanger in the hallway with your own hands.

Advantages of self-production:

H low cost of the product;
AT the ability to achieve the best combination with the interior;
And individuality of the hanger: your friends and acquaintances will not have this;
R academic work is highly valued.

Original wall hangers in the hallway are an important and integral element of the interior.

Before proceeding with the manufacture, you need to analyze the shape of the corridor. If it is elongated enough, it is better to give preference to a long hanger with compact shelves or no shelves at all. For large rooms, you can choose any model.

It is also worth considering the features of the interior: style, details, prevailing colors.

The simplest type of hanger is a wooden board with hooks attached to the wall. It is allowed to have a shelf for hats, sides located above or below it. The basis of the design can be taken as a homogeneous large wooden plank, as well as several smaller ones, fastened together.

In the traditional version, the wall hanger is a bar on which hooks and pins are located.

If you want to show your creativity, you can make a custom model. For example, an excellent hanger for a nursery will turn out if you create a blank in the form of a cloud, tree or twig. For the corridor, it would be better to cut out something else: horns, a fence or an inscription.

Wall hangers in the hallway and coat hooks are selected according to the style of the interior of the room.

Materials and tools

Now, in almost every hardware store, the buyer is provided with such a rich assortment that it will not be difficult to purchase everything necessary for a wooden hanger to be created with your own hands in the shortest possible time.

Do-it-yourself wall hanger in the hallway - simple work with pleasure from the result.

To do this, you should buy or prepare the appropriate tools:

jigsaw
Hacksaw;
Blowtorch;
Sandpaper;
Screwdriver or hammer;
Awl;
Pencil;
Roulette.

Tools to help you get the job done.

From the materials you will need:

A piece of wooden board;
screws;
Hooks.

Materials for the future hanger.

For decoration:

Primer;
Paint brush or roller;
Lacquer or other coating;
Blanks for decoupage, scissors, glue, textured sponge.

Materials for decorating hangers.

hanger manufacturing process

A classic do-it-yourself hanger for the hallway does not require significant effort. Production takes a minimum of time. Initially, it is necessary to think over the design in detail, it is recommended to make a drawing on graph paper and calculate the consumption of materials.

You need to transfer the drawing with a pencil or marker.

Then you should get a wooden sheet (or board) and put it on stable supports so that a few centimeters remain between it and the surface of the floor or table. Armed with a jigsaw, cut out blanks of the required shape, observing the contour. If you want to make the edges embossed, you need to go through them with the same tool.

It is necessary to process the roughness, sand the cut points and sand.

Next step - giving the desired appearance. For firing the boards, you will need a blowtorch, which is successfully replaced by a gas burner. At this stage, care must be taken not to injure the fingers, and not to spoil the material. Then you need to get paint or varnish and cover all the sawn parts.

After drying, the assembly of the product is carried out using screws.

The hinged method involves mounting small rounded metal strips, called "ears". Holes are drilled in them for fastening in dowels with screws. The reliability is determined by their length.

A DIY wall hanger can be fixed in several ways.

Another, no less popular way is to do through holes. After their creation and processing, screws or nails with a long leg are skipped and the hanger is attached to the wall.

For fastening, as a rule, screws or small nails are used.

To complete the work you need to attach metal hangers. You can arrange them randomly, in one or more rows.

It can be fixed with the following devices:

"Suckers";
adhesive strip;
Magnets.

Such methods do not cause difficulties and take little time. In this case, the fastening is not very reliable and is suitable only for hats.

Any bold design options will favorably emphasize the relevance and originality of the interior.

Making hangers from longitudinal and transverse boards

This design resembles a lattice; it involves the manufacture of a base attached to the wall from horizontally and vertically arranged elongated boards. In this case, it is conditionally possible to distinguish two layers: the first- transverse, second- with longitudinal.

Drawing of a wall hanger with dimensions.

To create a wall hanger with your own hands, you will need to stock up on a few long boards. It is better to give preference to lumber with a width of 10-20 cm and a length of 1 m. Having decided on the size, you should get the required number of blanks.

How to assemble the hanger.

After that, it is necessary to process them so that there are no bulges, chips and roughness, giving Special attention edges. Then it is necessary to decompose first the first layer, observing parallelism and the same distance between the planks. If everything suits you, it's time to move on to the second level. Armed with a screwdriver (or, in its absence, a hammer), fix their position at the intersection.

A simple hanger option for self-production.

Hooks need to be attached to the top boards. If they have a vertical position, then it is better to place the hooks in the upper part in one row. For a hanger, the outer side of which is formed by vertical planks, you can create several levels by attaching hooks to each of them.

Hanger dimensions with shelf.

decoration

You can complete the production by giving the product the original appearance. The most interesting surface will be if:

Before proceeding with the coating, the wood should be cleaned of traces of dust, dirt and grease.

DIY materials for decoupage hangers.

We need to prime our wooden hanger with white acrylic paint.

Glizale is a transparent paint that, with some effort, forms a textured surface. Before starting work, you should dilute the glizal with water, according to the instructions. Then the mixture is applied to the prepared workpiece and a pattern is created using a textured sponge. It is necessary to act quickly, otherwise the coating will harden in half an hour. For artificial aging of wood, a type of varnish such as craquelure is used.

It is applied to a pre-painted surface, which as a result is covered with small cracks.

Decoupage allows you to create wooden products suitable for any interior. Most often they resort to it when they want to get furniture with the effect of antiquity and complex patterns. To decorate such a hanger, you will have to arm yourself with scissors and blanks with a pattern.

Having cut out paper patterns, it is better to lay them on the surface, evaluate how they will look.

If everything suits- smear the wrong side with glue, attach to the tree and level it so that bubbles do not subsequently form, then cover with furniture varnish and leave to dry completely.

Which finish to choose is up to you. After the varnish has dried, screw the handles into place.

If you have artistic skills, you can draw a picture acrylic paints. Initially, the background and large elements are created, then the details are drawn. It is better to complete the work by applying varnish and craquelure.