Beautiful flower beds from plastic bottles. Flower beds from plastic bottles. Plastic containers - an indispensable material for creativity

Recently, flower beds have become increasingly popular, for the creation of which plastic or glass bottles. This material attracts attention with its ease of processing and lack of financial investments. After all, everyone has stocks of plastic containers (large or small), and there will always be glass bottles too. It remains to show a little imagination - and the original flower bed is ready. In addition, in such a flower bed, the soil will remain moist longer and it is easy to take care of it - the planted flowers will not go beyond the flower bed, and the weeds will not penetrate from the outside. Some examples of bottle flower beds are discussed in the article.

Flowerbed-animal from one container

A flower bed created from one plastic bottle of various sizes is suitable for those who have little space on the site, besides, such a flower bed can be rearranged or decorated with ready-made flower beds. The shape depends on the size of the plastic container. From bottles of 2 liters, cute little animals are obtained, and from a five-liter bottle - a fabulous pig.

To do this, you need to cut a hole on one of the sides of a plastic bottle, into which flowers will be planted later. On the reverse side (bottom of the flower bed), make drainage holes. From the neck, make a muzzle, and from the cut out piece of plastic - the necessary details such as a tail, ears, legs, etc. It remains only to paint the beast in your favorite color.

Here are the flower beds in the form of animals and even equipment can be made:

Flowerbed of bottles dug vertically

The shape of such a flower bed depends only on desire, you can lay it out in the form of some geometric figure(circle, oval, square) or give the shape of an animal or bird. For the construction of a flower bed, plastic bottles of any size are suitable: for a small flower bed - half-liter containers, respectively, for a larger flower bed it is better to take two-liter containers. Instead of plastic containers, glass bottles of the same color can be used.

The design technology is as follows:

In the area allotted for the flower bed, make markings and dig a not very deep groove along it, the width of which is equal to the thickness of the bottle, and the depth is about half its height.
Fill the container with earth or sand (which is available) - this is necessary so that the bottles are more stable and do not fall out.
Install the bottles in the groove tightly to each other, avoiding the formation of cracks.
Dig a ditch with bottles and trample well.
If desired, paint the protruding part of the bottles.

Below are options for decorating flower beds in this way.

A flower bed of glass bottles laid on a base

The main difference of this flower bed is that, due to its dimensions, it is likely to be stationary. As a base, an old barrel or stacked tires are suitable. If there is a bottom at the base of the flower bed, drainage holes must be made in it.

To build a flower bed, you must:

establish the basis for the flower bed;
prepare a cement mortar (1: 2);
starting from the bottom, apply a solution to the base of the flower bed;
lay out the first row of bottles, pressing them into the cement;
Put the next layer of bottles on top of the first in a checkerboard pattern, and so on - to the desired height of the flower bed.

When the solution hardens, pour crushed stone or pebbles for drainage inside the flower bed (on the bottom), and nutrient soil for plants on top.

There are still a lot of examples of designing flower beds using bottles, the main thing is to show a little imagination, and elegant flower beds will delight with their appearance all year round.

Ideas for decorating flower beds from bottles, video

A plastic bottle is considered not only ordinary garbage, but also a real product for the quick implementation of creative ideas. This is, in essence, great material, thanks to which today it is possible to make especially beautiful ones. But what is the best way to ennoble a flower bed using ordinary plastic bottles? Today there is a large number of variety of options for self-fulfillment unusual crafts for a private country house.

It is recommended to engage in the direct manufacture of the border with the help of two effective ways- vertical and horizontal position of the bottles. Method number one is easier and more affordable. For its implementation, you will need bottles with absolutely any capacity. It is best to use bottles with hard plastic, as they will significantly strengthen when filled. necessary material. The method under consideration involves the use of bottles various shades and quality. To fill the bottles, you only need earth. To create an original masterpiece, you need to fill a two-liter bottle with earth as much as possible. You can use bottles even with a pre-cut neck. They are easier to fill, and the trench will not be needed there with great depth. Although, as a minus, it is necessary to highlight a small strength.

Next, you need to dig a trench with the desired depth. The height of the fence directly depends on the depth of the pit. Bottles must be tightly packed, sprinkled with earth and rammed.

When laying horizontally, you must concentrate carefully, as there is a heavier mechanism. It is also necessary to dig a trench, but with a shallower depth.

The neck does not need to be cut. With this method, you can achieve the presence of a multi-tiered fence. This looks very aesthetically pleasing in real practice, but it is more problematic to execute. It is best to fasten the neck of the bottle with a mesh and drop it with earth.

Making flower beds - lakes with plastic bottles

Excellence - maximum saturation. Of course, the finished lake is decorated with a variety of flowers, birds, but it does not look organic if you do not follow the color scheme.

In this situation, the outer part of the bottle is not covered with paint. Acrylic paint works great. Such a bottle is filled with light sand. It is advisable not to touch the neck, otherwise it will not be possible to mix the paint. It is good when the bottle is pre-painted in blue, blue or green. The location of the lake is desirable to choose a flat one. But deeper terrain is not considered a problem, as the bottles are perfectly adjustable according to the height. You can also remove the excess land along the edge of the lake, and at the same time make an elevated type of curb. The bottles used should be installed in a hexagonal fashion. From plastic material, you can easily build a sculpture for the garden.

One of the most optimistic plastic flower crafts. At self erection Plastic flowers are perfect for colored bottles. A translucent type of flower with dyed petals also looks great. For the middle of the bottle, light, yellow and milky colors are great. At the container, cut the edges strictly in shape, and fold the bottles in a multi-tiered plan, so that the petals come out as a result of multi-layered. The texture of the petals in the boiled liquid changes. If you are processing plastic material at high temperature regime, then toxic substances will be actively released.

The cooled petal is bent with tongs and other devices. If you want to make the petals green, then you need to look for a green or dark bottle. From the brown bottle, the final result will be the presence of autumn. Dark bottles will look very advantageous.

Making a flower bed - container

The considered flower garden - the container has a relatively small size, for this reason it can be placed in any desired place. Due to its lightness and mobility, it will be admired by the people around. The capacity for application can vary from three to ten liters.

This container can be made in the form of any forest animal. To work, you will need high-quality glue, ordinary scissors, a bulk bottle and acrylic paint.

This flower bed is great for lawn owners. Initially, you will need to create an earth pile. On a hill, you can also install a bottle. Plastic must first be painted over. The main thing is to avoid red and brown shades.

When filling with earth, it is desirable to cut off the neck. To work on the central part, only dark-colored material is required. The next step is to lay the head of the bug, starting from the edges. Next, a red bottle is laid, tamped down and a fence is made.

Flower garden - a little animal from a plastic bottle

This one serves as a flower pot for the street. Only one plastic bottle is needed for the workflow. All used elements are attached with glue. When making an animal - a flower garden, a large amount of paint will be required. Purchased paint must have good water resistance.

You can buy a special oil paint but this type of paint takes a long time to dry. To obtain color overflows, it is recommended to use paint with a spray bottle. It creates haze and brightness, and dries much faster.

How to make a gnome from a plastic bottle?

A bright, well-groomed flower garden is an adornment of any dacha and personal plot. In arrangement landscape design available materials can be used. For example, create beautiful flower beds from plastic bottles with your own hands. Using recycled materials, it is easy to decorate a nondescript wall or fence, make an unusual flower garden fence, a hanging planter or a full-fledged flowerpot. First you need to choose a flower bed model and familiarize yourself with the technology of its manufacture.

Framing a flower garden with PVC bottles

The advantages of flower beds from plastic bottles

Arranging a flower garden using plastic containers has a lot of advantages. A prime plus is accessibility consumable. Each family in one quantity or another purchases drinks, water or household chemicals in polyvinyl chloride bottles. Most consumers throw away an empty container, but some craftsmen improvise - create unusual flower beds from plastic bottles without investing additional funds.

Plastic container - available material flowerbed design

There are other advantages that explain the popularity of such a "know-how" among summer residents and gardeners:

PVC bottles of various sizes - versatile material. They are suitable for creating a flower garden fence, building a mini-fence, growing seedlings and decorating the site. From the bottles it will be possible to make a flower bed of almost any size and shape.
Perennials planted in "plastic" structures grow and develop within the specified limits, without growing over the site. This quality greatly facilitates the care of plants and prevents weeds from entering the flower garden.
The fence helps retain moisture, so that the soil does not dry out.
In case of damage, the flower garden is easy to repair. It is enough to replace the broken element with a new one.
With the help of bottle fences, it will not be difficult to zone the space of the site, delimit the plantings and outline the boundaries of the path.
Reusable use of plastic products indirectly protects the ecological environment. PVC material is difficult to recycle - the period of its decay in nature is about 100 years.
Plastic does not need special preparation before use in horticulture. Bottles are easy to handle - they are easy to cut, glue or paint in the desired color.
PVC bottle only at first glance is a flimsy and unstable material. However, it is not. A container filled with sand or water can withstand heavy loads. Over time, the flower bed in the country will not lose its original shape, will not collapse and will not succumb to corrosion from an excess of moisture or temperature fluctuations.

Multi-tiered flower bed for vegetable crops

What flower beds can be made with your own hands

With your own hands, you can create many options for a fence for a flower bed from plastic bottles. The choice is limited by the imagination of the performer and the size of the site. The originality of the garden is emphasized by hanging and multi-tiered compositions, as well as figurine flower beds.

Fencing from plastic bottles for flower beds

A fence for a flower bed made of bottles is made using a vertical or horizontal method. The first option is the simplest and involves digging the container into the ground - with the neck down. The method is optimally suited for creating flower beds of complex shape and delimiting beds on the site.

bright garden beds

A peculiar border for a flower bed made of plastic bottles allows you to realize the most daring design idea. It can be an artificial reservoir with swans, a bright butterfly, a flower garden in the shape of a crocodile, stars and much more.

The entire implementation process can be divided into several stages:

Sketch development. On paper, display a plan for arranging bottles - their number, color and shape of the flower garden.
Material preparation. Bottles must be cleaned, labels torn off, washed and dried. Paint if necessary.
Site marking. On the ground, mark the contour with sand.
Fence installation:

dig a shallow ditch along the perimeter of the flower bed, the width of which is equal to the thickness of the bottles;
fill containers with sand or pebbles;
bottles consistently dig into the ground, joining tightly to each other.

Complex flower arrangement

Despite the ease of execution, the result pleases with a well-groomed and neat appearance.

With a horizontal arrangement of bottles, a full-fledged flowerpot is formed. Before you cover the flower bed with plastic bottles, you need to pick up a rigid support: a polycarbonate sheet, a barrel without a bottom or a large tire.

Deep plastic pot

Production order:

Prepare a cement-sand mortar by mixing the components in a ratio of 2: 1, respectively.
Wash the bottles and fill them with sand.
Lay a layer of cement along the inner contour of the mold.
Insert bottles into the solution, filling the entire form with plastic containers. Both the neck and the bottom can be attached to cement - it depends appearance compositions.
The second and subsequent rows are stacked in a checkerboard pattern.

When the fence of plastic bottles for the flower bed is ready, drainage should be placed at the bottom, and fertile soil should be poured on top. Decorate the sides of the structure with cones, shells or moss.

wall decoration hanging planters

Hanging flower beds for an unusual garden decoration

Unusual decoration option suburban area – hanging flower beds from plastic. They create the effect of a hedge and are used to zone a space or decorate a nondescript wall.

As in the previous case, two implementation methods are possible: horizontal and vertical suspension.

Do-it-yourself "hanging gardens" with a horizontal arrangement:

Mark the contour on the bottle with a felt-tip pen.
Cut a hole for planting flowers.
Make two pairs of holes and thread a strong thread or fishing line through them.
Adjust the length and fix it by installing the ring from below and tightening the knot tightly.

Hanging horizontal planter device

Ampelous flowers, undersized plants or herbs are planted in hanging containers.

Vertical flower beds from plastic bottles are made using a similar technology:

Cut two side holes, leaving a bottom bowl for soil.
At the base of the neck make through hole and thread a string through it.
Adjust the length of the rope and hang the pot on the prepared hook or fix it on a horizontal bar.

suspended vertical flower bed

Single planters are suitable for decorating a gazebo or arranging a patio.

It is necessary to prepare:

bottle - 1.5 l;
stationery knife;
spray paint;
stickers;
yarn and crochet hook.

Master class on creating flowerpots

Sequencing:

Cut off the bottom of the bottle, trim the edges with scissors.
Drill holes in the resulting glass, indenting 5-10 mm from the edge. The distance between the holes is about 12-14 mm.
Paint the pots or decorate to your liking. Leave the workpiece to dry completely.
Tie the top edge of the pot with yarn in a contrasting color.
Pass a thick thread through the hole or tie the rope yourself.
Place a flower pot in the finished flowerpot and hang it up.

Making flower pots "funny little animals"

The playground can be decorated with flower pots with muzzles of different animals. It is advisable to involve little helpers in creating crafts with your own hands - children will be happy to participate in decorating the garden. Kids can be entrusted with choosing an image and decorating flower pots.

Multi-tiered flower bed to save space

The multi-level composition resembles a pyramid consisting of several tiers. The lower step has the most large diameter and the top one is the smallest. The number of tiers is chosen arbitrarily, while taking into account the dimensions of the structure and the variety of flowers to be planted.

The procedure for making a flower bed:

Pick up and sort bottles. In one tier, it is desirable to use a container of one liter and color.
Remove labels and wash containers.
Determine the boundaries of the flower garden and markup.
Form a ditch along the contour of a large circle. Trench depth - 8-10 cm.
Install the first tier of plastic. To strengthen the structure, the fence can be pulled with wire.
Pour soil inside the barrier and compact it in the center.
Mark a circle of smaller diameter - the border of the second tier.
Install the bottles, forming the next step.
Pour the earth and build the third tier in the same way.

Multi-tiered flower bed made of plastic containers

When building a multi-tiered flower garden, some nuances should be taken into account:

In one tier, it is desirable to plant flowers of the same size.
Plants of dark shades are best placed in the lower tiers, and light ones - higher.
On the lower step, plants should be planted that tolerate high humidity. After watering or rain, some of the water will drain and accumulate at the bottom. Moisture-loving flowers include: violets, primroses, forget-me-nots, astilbes, geraniums and irises.
At the top of the composition, marigolds, asters, kosmeya and nasturtium will feel good. These plants easily tolerate the lack of moisture.
It is important to harmonize color accents. Two-tone contrasting flower beds look beautiful. Spectacular compositions are obtained when the color changes from cold to warm or from dark to light. For example: turquoise - purple - blue or red - orange - yellow.

Advice. It is advisable to choose plants that bloom at the same time. Information about the timing of planting and flowering is indicated on the seed packaging.

Artificial flowerbed " Ladybug»

Ladybug flowerbed

From a plastic container, you can make a bright and cheerful flower bed in the form of a ladybug. The stylized element will perfectly fit into the surrounding landscape of the site. An additional plus is the off-season and unpretentiousness of artificial decor.

To create a flower bed in the courtyard of a private house or in the country, you will need:

containers of the same displacement (0.5, 1 or 2 liters) - the volume is selected depending on the dimensions of the flower bed;
acrylic paint in red, white and black;
scissors, sand and cobblestones to form the outline of the composition.

The arrangement of the elements of the "ladybug"

Step-by-step instruction:

Prepare bottles. Cut off a third of each, leaving the lower part, and paint in the desired color. The blanks must dry completely.
Draw a contour on the site, taking into account the dimensions of the finished product. If a two-liter container is used, then the length of the “ladybug” will be about 170 cm, and the width will be 150 cm. When working with a half-liter container, these parameters will be 100 cm and 90 cm, respectively. You can perform an accurate calculation yourself, starting from the scheme proposed below.
Place stones around the perimeter of the future composition - the border will prevent the soil from spilling out of the flower bed.
Mix sand with earth and fill the “flower garden” with the composition, forming a hill small size. Slightly moisten and compact the base.
Draw the contours of the insect on the ground with a stick, indicating the location of the wings, muzzle and eye.
Lay out the elements of the "ladybug" like a mosaic, following the outlined boundaries and the scheme of the composition.

Composition on a wheel

A large wheel is suitable as a base and at the same time a curb for the entire structure. If you paint it green, you get the illusion of a "ladybug" on the lawn.

Don't limit yourself to this example. Contour plastic flower beds accept many images: symbols, animals, constellations, natural phenomena. The decoration of the estate will certainly be an artificial lake made of blue PVC bottles. Flowers, birds and plants planted on the banks of the "reservoir" will add naturalness and picturesqueness to the composition.

Artificial reservoir on the site

Flowerbeds from large plastic bottles

Large plastic containers with a volume of 5 liters or more are great for creating original animal-shaped flower beds. A funny hedgehog is very easy to make. Five-liter containers must be painted in grey colour and cut a hole for planting. It is better to plant in a homemade flowerpot lawn grass- lush vegetation resembles thorns.

Decorative element landscape

A popular design technique among summer residents is a pig flower garden. Large piglets are obtained from bottles with a capacity of more than 5 liters, and small “heels” are obtained from bottles of 1.5-2 liters.

To create one mini-flower garden for a summer residence, you will need:

PVC containers: 1 pc. for 5 l, 4 pcs. 0.5 l;
scissors;
pink paint and brush;
ear, eye and tail templates.

Making a flower garden with the help of flower beds-pigs

Master class on creating a flowerpot with your own hands:

Paint the assembled figure with pink paint on the outside of the product.
Before the paint dries, position the pig's nostrils and eyes.

Ready-made flower bed in the shape of a pig

Install the finished flowerpot in the front garden and plant flowers in it. Various options flower beds-pigs are presented in the video.

Video: Flower beds from bottles to give

Original flowerpot in the form of a donkey

It is somewhat more difficult to make a donkey. But the result is not just a flower garden, but a full-fledged garden sculpture.

Mobile flower garden "Donkey with a cart"

To create a donkey you will need:

five-liter bottle;
3 pcs. two-liter containers - for the head, ears and neck;
4 half-liter PVC bottles from kefir - for the legs;
yarn - for the mane and tail;
acrylic paint, adhesive tape, wire, glue, scissors and self-tapping screws.

Making a donkey from plastic bottles

Having collected all the elements together, you need to color the figure of the donkey, fix the mane and bridle. Pour sand into the container for the legs so that the craft does not tip over.

The solution is simpler - flower beds of five-liter plastic bottles in the form of a train.

Multi-colored trailers made of PVC bottles

How to paint plastic bottles for flower beds

"Plastic craft" requires careful paint selection. It is important that the finished product looks spectacular, does not fade in the sun, and the coating does not peel off from the rain.

The choice of paint for decoration

The following paints are suitable for coloring garden crafts:

acrylic composition. Adheres instantly to most surfaces, including plastic. To protect the surface and give it a gloss, it is desirable to cover the PVC product with a colorless varnish.
Colored acrylic varnish. Allows you to get a bright shade with one coloring. Many consider varnish to be the best way to paint plastic.
Aerosol paint for graffiti. Easy to use, but requires additional surface treatment with varnish. This option is more suitable for small garden fences.
Automotive enamels. They do not fade in the sun and ensure the attractiveness of the painted surface for several years.
enamel compounds. An affordable option for painting large areas. You can purchase white enamel and add color to it as needed.
Stained glass paints. The most expensive way to decorate plastic crafts. It is advisable to use it when creating small details of pictorial compositions.

Painting plastic with a brush

Staining methods inside and out

Staining is carried out by different methods:

spraying from a can - it is convenient to work with stencils and make gradient color transitions;
painting with a brush - creating a smooth coating, applying patterns to crafts;
painting with a sponge - allows you to achieve surface texture;
painting with acrylic from the inside - the result is a deep color.

Technique for painting plastic bottles from the inside:

Pour a little paint inside a transparent container.
Shake the bottles so that the bright pigment is evenly distributed over the walls.
After complete drying, fill the containers with white sand - this will ensure color saturation.

Important! Whatever technique is used for painting, plastic containers must be prepared - cleaned and degreased with alcohol or acetone.

Painting plastic containers from the inside

To create bright and functional elements of landscape design, it is not necessary to spend a lot of money. Used PVC bottles will serve as the basis for the construction of original flower beds and flower beds. It is enough to show imagination and spend a little time to make a country masterpiece.

Throwing away unnecessary, at first glance, things is hard: the hand does not rise. And throwing away a beautiful thing is generally unrealistic. Might be useful? With time beautiful bottles, left over from holidays and parties, begin to accumulate and spoil life. That's right, the bottles should not be in the apartment, their place is in the country. There they will quickly find a use. For example, you can make flower beds out of plastic bottles, using them as a fence or as containers in which garden plants will grow and bloom.

To fence the flower bed, it is better to take one and a half liter bottles of the same shape. You can use containers of different colors, but then you have to alternate them in a certain sequence so that the finished flower bed looks neat. By the way, bottles of different volumes can also be alternated.

Bottle flower beds look very good. Elements of such a fence can be decorated with flowers, which are also cut out of plastic bottles. The shape of the future flower garden does not really matter. It can be a circle, oval, rectangle or any other shape. The main thing is that the structure should have clearly defined boundaries and a sufficient size.

Plastic bottles make beautiful flowers that can be used to decorate a flower bed fence: delicate, bright, varied and always amazing with novelty

Vertical bottle placement

This option for using plastic bottles is the most simple and obvious:

Bottles must be freed from labels, washed and dried well. Now the material for the construction of the fence is ready.
For better stability and structural strength, sand or earth can be poured into the bottles.
The finished elements of the fence are dug in around the perimeter of the flower bed so that the bottle is securely fixed and does not stagger.
The next container is placed close to the previous one: there should be no gaps in the structure. The bottles dug in succession gradually form the entire fence.

With all the ease of execution, the result will pleasantly surprise: the flower bed looks neat and well-groomed.

Vertical fencing is easy and simple: affordable, resistant in all weather conditions and quickly erected - it will help to beautifully highlight the flower beds

There is interesting video on this topic:

Horizontal bottle placement

It is a little more difficult to make such a flower bed, but it looks very attractive and unusual.

For a flowerpot, you definitely need a base: usually half a barrel or even stacked tires are perfect for these purposes.

Work procedure:

Such a flowerpot requires a foundation. To do this, you can take an old metal barrel, cut in half - there are already two flower beds. Even stacked car tires will do. The size of the container will become decisive for the parameters of the flower bed itself - this fact must be taken into account.
The bottles are clean, dry and ready for use and should be placed close to the container.
Let's prepare a solution of cement and sand in a ratio of 2: 1. We will cover the container with them sequentially from the bottom up. The solution layer should be sufficient to ensure that the bottle neck is well fixed in it. The container must not be plastered all at once, because the solution may harden before the bottles are immersed in it.
Starting from the bottom row, slowly, but without delay, we fix the bottles with their necks in the solution that is applied to the container. It is important to lay the very first layer correctly, then it will be a support for the next one. The bottles stacked in a checkerboard pattern will create a spectacular frame for the flower bed.
The work is not difficult, but it should be treated responsibly. Let the solution set, otherwise you will have to start all over again.
The top layer of the bottles does not look too neat, because the “wrong side” of the work is visible - a cement screed into which the bottle necks are immersed. It is better to hide this flaw at the moment when the inside of the flower bed is filled with soil. The necks in the cement are decorated with moss, pebbles, shells or cones - any material will fit through which this part of the flower bed will not shine through.
In the flower bed itself, the filler must be placed in layers. The bottom layer is a drainage, for which small pebbles, expanded clay, brick fragments will fit. Top with fertile soil. It is better if the resulting flowerpot does not have a bottom: the water will not stagnate in it and the roots of the planted plants will not turn sour. If there is a bottom, you just need to remember to make a few holes in it.

A flower bed with a bottom is good for its mobility. If she gets bored in one place, she can always be moved to another.

Look, this flowerpot is a real work of art, but it is based on an old wheel and brown plastic bottles.

Benefits of using plastic containers

Plastic fencing has many advantages, the first of which, of course, is its availability. We often just throw away bottles, but here we used them, and even wisely. Such an elegant solution to the problem of garbage as decorating a flower bed with plastic bottles deserves close attention.

Discarded plastic bottles significantly pollute environment, therefore, their correct use is very important for maintaining ecological balance.

Other advantages of this use of plastic bottles include:

, planted in a flower bed, will not grow beyond its limits, and the roots of weeds will not overcome the plastic barrier. This fact will greatly facilitate the work of caring for a flower bed.
A kind of plastic fence will not allow the earth to dry out.
The fence consists of separate elements, each of which can be easily replaced in case of failure.
Plastic containers are a threat to the environment because they do not decompose naturally. This resistance of the container, used as a barrier, can no longer be considered a disadvantage, but a virtue.

By the way, you can even make a flower bed from one plastic bottle if its capacity is large enough. It can simply be used as a flower pot. Just do not forget to make drainage holes in the bottom.

Two mice or a whole brood of piglets - all these are flowerpots or flower pots, which are based on ordinary plastic bottles

Flowerbed "Ladybug" made of plastic

For the flower bed "Ladybug" you need plastic bottles of red, black and white color. Since it is rather problematic to assemble such containers of the same size, we will focus on transparent bottles that will be painted in the desired colors.

Bottle size matters. Using too large containers, the author of the flower bed will be forced to increase the size of the composition. This is not good, because it will take up a lot of space and will not be as elegant as we would like. Let's focus on small bottles.

We start by painting the bottles in the right colors. Only two white bottles are needed - these will be the eyes of the insect. We use black containers for his head and spots on the wings, and red ones for the wings themselves.
We lay out the perimeter of the future flower bed with a border so that the soil does not wake up outside.
Pour soil inside the flower bed. He needs to give a semicircular shape to the cow's body.
According to the scheme depicting an insect outlined on the ground, we begin to place the bottles with the cork down, screwing them into the soil.

In the process of work, we do not forget not only about accuracy, but also about the general idea of \u200b\u200bwork: after all, it should turn out to be a ladybug.

Having this scheme, it is not difficult to navigate and correctly calculate the need for bottles and paint, the scheme will also come in handy for the subsequent placement of bottles

Here is such a wonderful flower bed that can decorate your garden if you use plastic bottles that are unnecessary in the household wisely

You can make a flower bed out of bottles with your own hands in a different shape. Using bottles, we can lay out ornaments or images. The principle will be the same as for cross-stitching or knitting a pattern on knitting needles.

Used plastic and glass bottles can gain new life if you try to make flower beds from plastic bottles with your own hands. Of course, a large "army" of bottles should not be kept at home, because with their help you can make flower beds and crafts for the garden with your own hands in a couple of days. You will learn how to decorate a garden or make a path to the house from plastic bottles below.

Flower beds from used raw materials have many positive aspects. The most important thing is the availability of the material, because almost every family buys drinks in plastic or glass containers. Secondly, the craft made does not allow perennials grow chaotically, i.e. beyond strictly allotted limits. Weeds also have a hard time getting past the plastic barrier. This will save you time on spring work when planting and weeding a garden or flower bed. Thirdly, a flower garden with plastic fencing does not allow the soil to dry out.

Another very important advantage of such a fence is the ability to replace any fragment of the structure when it fails. Plastic is a material that does not decompose naturally, so reuse is more of an advantage than a disadvantage. It is not difficult to make such a structure in the garden with your own hands, since plastic is easily cut and dug into the ground.

What are the types of structures

To date, there are a lot of options for decorating the border of a flower bed or flower garden with plastic bottles. Using PET raw materials and your imagination, you can make a fence of almost any shape and size. Most often, crafts are made in the form:

circle;
rectangle;
square.

Of course, you can get more creative and make something in the form of a designer in the shape of a butterfly, sun or any other shape, since plastic will endure everything.

It is easiest to work with bottles of the same shape and color. However, you can also make a multi-colored flower garden by alternating PET bottles in a certain sequence so that the design is neat and attractive. Types of placement of plastic bottles to form a flower garden: vertical crafts, horizontal crafts.

Video "Instructions for making a flower bed"

Video instruction on how to make a flower bed yourself.

Flower bed installation process

A vertical fence is most often used as a border for an existing flower bed, while a horizontal structure is created along with the flower bed. It is much easier to make a vertical craft, as the shape of the bottle matches common theme designs. Before installation, stickers are removed from the bottle, then it must be washed and dried. To make the structure more stable, sand can be poured into the tank. The installation of the fence takes place in two stages:

Determination of boundaries and their marking. At this stage, we determine the shape and boundaries of the flower garden, make a sketch on paper, and then measure the required distance along the perimeter and form a groove 8-10 cm in depth. The width must correspond to the diameter of the bottom.
Filling a PET bottle. The container is filled with sand, pebbles or any other filler and set butt to each other along the marked contour. Thus, do-it-yourself flower beds are formed from plastic bottles of a vertical type for a garden.

Placing PET bottles horizontally is a little more difficult than the previous option, as some skills and auxiliary materials are required. Such a barrier looks very beautiful, and its protective functions are much stronger. As additional materials for registration, you will need a base and fasteners. A cement substance is often used as a fastening material, and an old leaky barrel or a used tire can be taken as a base. The boundaries of the flower bed in this case are determined by the diameter of the base. The base is covered with fastening material to the thickness of the neck, while the plugs must be removed.

The cement substance is prepared from cement and sand in a ratio of 1 to 2. If possible, you can use ready-made assembly adhesive. We start to apply the solution and fix the bottles from the bottom, gradually rising to the top, since each circle acts as the basis for the next row. Strive to do everything carefully and carefully, especially with the first bottom layer. We form each row of crafts after the previous one dries. To decorate the last row of bottles, use moss, pebbles, or special decorative elements for the garden and flower beds. So, like a designer, you can decorate the backyard with used plastic bottles with your own hands.

How to arrange a decorative component

Once the fence is installed, the main part of the work can be considered completed. In principle, such a flower garden will more than fulfill its protective and enclosing function, however, you can show your imagination and decorate the resulting structure. To do this, you can use multi-colored paint, pebbles, or make various figures from plastic with your own hands, for example, tulips. To do this, the neck of the bottle is cut off in the form of a flower petal, and then each flower is painted acrylic paints. With such a decor, hand-made flowers will look bright both in warm weather and in winter.

Video "Master Class"

Master class how to do it yourself original flower bed using plastic bottles.