Do-it-yourself garden swing: how to make a reliable, high-quality and beautiful swing? (90 photos). Do-it-yourself garden swing made of wood for giving - everything you wanted to know! Decoration and arrangement

Over the years, sofa swings have not lost their popularity. Such a design idea is to the liking of children and adults. Sitting comfortably on the sofa, it is easier to think over incoming thoughts, read an interesting book, drink coffee, while enjoying the pleasant sights and sounds of nature.

Sofa swings are best made from expensive woods, such as red oak.

Such structures are most often installed in the following places:

living rooms;
children's rooms;
playgrounds;
garden plots;
in the courtyard.

Advantages of hanging sofas

Compared to conventional swings, such installations have many advantages:

ease of manufacture and installation;
space saving;
ease of operation;
high comfort;
high mobility;
additional sleeping place when installing a swing indoors;
great decor addition various premises, garden plots.

Drawing of a garden swing for a summer residence ^ List of materials for the manufacture of a swing.
A - Carrier bar. Dimensions 1500x90x35 mm. Quantity - 1 pc. B - Central stiffening rib for seat support 400x90x35 mm. Quantity - 1 pc. C - Side ribs of the seat 525x90x35 mm. Quantity - 2 pcs. D - Side backrest support 540x90x35 mm. Quantity - 2 pcs. E - Armrest 340x90x35 mm. Quantity - 2 pcs. F - Diagonal fastening 500x90x35 mm. Quantity - 2 pcs. G - Armrest 540x90x20 mm. Quantity - 2 pcs. H - Swing back plank 1300x90x20 mm. Quantity - 2 pcs. J - Seat end plate 1275x90x20 mm. Quantity - 3 pcs. K - Seat bar 1200x90x20 mm. Quantity - 2 pcs.
L - Bolt M10×100. Quantity - 4 pcs. M - Bolt M10 × 140. Quantity - 2 pcs.
N - Bolt with eye M10×50. Quantity - 4 pcs. O - Washers M10. Quantity - 2 pcs. C - Nut M10. Quantity - 10 pcs. "S" - Hook. Quantity - 4 pcs.
Chain (length is determined by the fact of swing suspension).

Back to index

Types of swing installations

The swing device depends on the purpose and material.

Back to index

Design purpose

According to its purpose, the hanging sofa is divided into the following types:

for premises;
for the street;
for adults;
for kids.

Back to index

Type of material used

During the construction of such a swing, the following resources are used:

wood;
metal;
combination of materials.

Back to index

Self-construction of metal hanging devices

Making such devices with your own hands has several advantages:

the possibility of using environmentally friendly resources;
creating a more stable frame;
construction of a swing of a suitable size;
the possibility of building a unique mechanism.

Back to index

Materials used

Drawings of sofa swing elements: handrail, seat support rail, handrail support bracket, swing back plank.

When building metal suspended structures with your own hands, you must purchase the following:

metal pipes over 6 cm in diameter;
metal rod 70 cm long - 5 pcs.;
metal slats according to the size of the back and seat of the swing - from 4 pcs.;
boards along the length of the seat - 5-6 pieces;
nuts;
bolts;
drill;
metal washers;
rope or chain.

Main tools:

welding machine;
Bulgarian;
drill;
a hammer;
spanners.

Back to index

Instructions for making a metal sofa for garden plots

To make a rocking sofa out of metal with your own hands, you need little skills in owning a welding machine, a drill, a grinder.

Back to index

Production of a metal frame

For the construction of a strong, stable swing frame, it is necessary to use high-quality pipe material.

The lower frame of the frame is made of a pipe in the form of a rectangle.
Supports 2.5-3 m long are welded to the corners of the rectangle. They should form one triangle each on the sides of the device.
A crossbar is welded over the support.
The swing is fixed with metal rods that are dug into the ground.

Back to index

Seat and back manufacturing

The frame is welded from metal strips.
Frame cover wooden planks. For this purpose, you can use another material.
Handrails are made from rods or metal strips.
If desired, the sofa can be upholstered with foam rubber, covered with leather or any other fabric.

Back to index

Arrangement of a canopy

To protect the structure from the adverse effects of precipitation, to give comfort, experts recommend arranging a canopy. It is made from metal plates thin pipes, corners. The covering material must retain moisture, not heat up under the influence of high temperatures.

Back to index

Connection of the installation frame with the support

The structure is connected to the support by means of a cable or chain. The cable is passed through the seat, handrails, then attached to the upper crossbar.

Back to index

Self-made rocking sofas made of wood

A wooden sofa has some advantages:

environmentally friendly material;
ease of installation, transportation;
low weight of the structure;
complements the list of decorative garden items;
high security.

Back to index

materials

For construction wooden structure size 170x70 cm, you need to have the following:

boards 5x10x170 cm - 3 pcs.;
boards 5x10x60 cm - 6 pcs.;
boards 2.5x15x170 cm - 10 pcs.;
wooden supports for armrests 5x10x50 cm - 2 pcs.;
armrests - 2 pcs.;
glue;
a hammer;
nails;
bolts;
screws;
primer;
putty;
paint.

Seat bar: side view.

Instruments:

grinding machine;
screwdriver;
paint brush;
drill.

Detailed instructions for the construction of a wooden hanging device

Compared with the manufacture of metal sofas, the construction of a wooden mechanism of this type with your own hands does not require special skills and training.

Seat bar: front view.

Making the seat and back:

Using a screwdriver, a rectangular frame with jumpers is built from the boards. For the strength of the swing, the joints of the boards are treated with wood glue.
The backrest support parts are attached perpendicular to the back of the frame with a screwdriver and glue.
The front of the frame is connected to two armrest supports.
Install armrests. They are simultaneously attached to the corresponding supports, back details.
The material for the back is fixed to the back of the frame.
The seat boards are nailed to the frame.

Back to index

Painting and finishing works

With the help of putty, cover all the cracks of the structure. After drying, the product is sanded, wiped and primed. The final stage finishing works is the painting of garden sofas. They are given a color suitable for the installation site. Most often, the wooden elements of the product are varnished. This emphasizes the natural color of the wood. This color scheme is ideal for garden and yard structures.

A swing is a truly amazing item that neither adults nor children remain indifferent to. But in the interior of an ordinary apartment there is no suitable place for them.

Even special swing hammocks for residential premises mostly perform a decorative function. But if you place a swing in the country, then you can swing on them in plenty. We share ideas on how to make a garden swing with your own hands.

1. Unusual use of PVC pipes

Metallo plastic pipes small diameter become the basis for making a garden swing with your own hands. You can also make beams from them, to which the swing is attached. But such a design will not be stable enough. Therefore, it is better to make only a seat from pipes. Pipes are easily cut with a hacksaw, and fittings are used to connect them.

2. For the most athletic

Even if the children are already tired of riding a skateboard, then throwing it out is not at all necessary. Just tie ropes to it and use it as a seat for your garden swing. There can be no doubt about the strength of such a structure.

3. Universal pallets

Construction pallets are a unique craft material. From them it will be possible to make a swing-hammock. The design can be very diverse. The simplest solution is to hang the pallet with ropes from a large branch. If desired, one pallet can be divided into two parts, and one of them can be used to make a swing back.

4. The second life of old tires

A swing seat made from an old car tire is a solution whose reliability has been proven over the years. Such a seat is not afraid of rain and sun, but despite its strength, it is quite comfortable. In the tire, holes can be made for ropes or secured with fastening screws. If you don’t want to mess around with this, then just tie the tire with ropes in several places.

5. Floating bench

A garden bench, on which you can sit in the air, can transform the look of even the most ordinary cottage. It is only necessary to saw off the legs from it and fix strong metal brackets in the railing. You will also need to take care of the arrangement of strong beams on which the swing will hang.

6. Stylish and spectacular

To create such a garden swing, you will need a dense fabric, several ropes and wooden sticks. It will also be useful to have minimal sewing skills. Important point: In order for the swing to withstand the weight of an adult, use a dense fabric.

7. If you don't want to part with your favorite chair

A not too massive chair can become an exquisite basis for making garden swings with your own hands. Such a design will be very convenient. But if you want the swing to also become a decoration of the dacha, then decorate it with pillows and a blanket. The swing from the chair is not intended for permanent stay in the garden: after all, the sun's rays, precipitation will not be reflected in the best way on the condition of textile and wooden parts. Therefore, it is better to provide a removable mount for them.

8. Weaving lessons in the country

If the swing is intended for children, then a bicycle wheel can be used as a basis. In other cases, you will need a metal circle or plastic pipes. Segments of the desired shape and size are connected to each other using special fittings. After that, it remains to fill the empty space inside the circle with the interlacing of ropes. They can be arranged randomly or use the macrame technique.

9. Maximum comfort

The most difficult moment when creating such a swing is to find a solid metal circle that will become their basis. The fabric, which is attached to the base in two layers, should also be sufficiently dense. It remains only to stretch the textile on the base and sew. Such fabric swings are able to take the shape of the human body, and therefore will be as comfortable as possible.

10. For the whole family

Such a garden swing, made from a sofa or bed, will be truly comfortable. A whole group of people can spend evenings on them. But in order for the design to be safe, it is necessary to take care of the strength of the swing attachment. After all, their mass will be much more than average.

11. Simple classic option

A board with four holes is the basis for making a simple garden swing with your own hands. You will also need a strong rope. To make the tree last for a long time, do not forget to treat it with protective impregnations or varnish it. So the wooden swing will not be afraid of changes in temperature and humidity.

12. Entertainment for motorists

Cases when the car is unnecessary are extremely rare, but still happen. If a car is available that is unsuitable for further use, then from its back with seats it will be possible to make a garden swing. The hardest part of this process is cutting the car. You will need a special tool, for example, a grinder. Be sure to finish the edges of the metal to avoid injury to swinging people.

There is no better decoration for a summer house or a private house than a swing - an excellent place for an afternoon rest for the whole family. Would you like to install them in your area? In our instructions you will find all the necessary information on how to make a do-it-yourself wooden swing for a summer residence and a garden, and not only about that.

The material is conditionally divided into three parts.

In the first part of the article, we will consider the properties of wood and which breed is better to choose to make a garden swing with your own hands. Next, we will clarify what types of swings are made of wood, and we will also provide a table with the calculation of the strength of the supporting structures so that you can calculate the weight load.
In the second part of the material, we will conduct several step-by-step master classes, from which you will learn how to make the most popular and not too complicated designs. wooden swing for giving. Among them: single wooden frame, from a bar and logs, in the form of a sofa and a bench, from a pallet, a double outdoor swing and a swing-balancer for children, as well as the simplest option from the board.
The third part of the article is aimed at arranging a garden swing. We will discuss their decoration, painting and the choice of covers. You will learn how to make a wooden swing seat with your own hands, how to fix it and repair it in case of cracking. In conclusion, we will consider the main swing roof options for summer cottages and gardens and how to care for such attractions.

Wood as a material: characteristics and properties

To build a good swing, first of all, you need to take care of the selection of quality materials. The most popular is wood - a cheap and practical raw material that will not cause difficulties in use even for beginners, not to mention experienced builders. Outdoor swings for summer cottages made of wood are popular in all types of plots - they organically fit into landscape design, easy to operate. Let's try to figure out what are the pros and cons of using such material.

Advantages and disadvantages of wood

You do not need to have serious carpentry skills to work with wood - for this you only need a few supplies (we will talk about them a little later). Among the advantages of wood it should be noted:

environmental friendliness - such material looks more organic on the site, the more flowers, bushes and trees you place on it;
aesthetics of wooden buildings - with a competent approach to decorating, the result can exceed all expectations;
low price.

However, while listing the advantages, it is impossible not to pay attention to some disadvantages. The most significant of these is the relative fragility of wood. Unlike a metal swing, a wooden swing will require much more careful care. Wood with difficulties endures such natural factors as:

rain;
snow;
direct sunlight;
fungus and mold;
insects;
sharp temperature changes;
decay processes.

That is why it is important to cover the tree with special antiseptics or just varnish, stain.

What breed is better to choose for a swing

Be aware that some breeds coniferous trees can be subject to rotting, which can be fought locally by covering the areas affected by the fungus with a special antiseptic (pinotex has proven itself well).

An excellent raw material for buildings of any type is oak, which has a significant drawback - the high price of raw materials. However, it is very durable, massive and quite easy to work with when decorating.

Another option would also be the construction of a linden swing - it is rarely used for large buildings, because it does not have a sufficient degree of protection from the cold, however, this factor does not play a significant role for a swing. The material itself looks attractive, while possessing the necessary level of strength.

Strength calculation for wooden swing beams

The calculation of the strength of the swing is based on the crossbar on which the swing will be hung. The thickness / height / length of the crossbar is taken into account. In the table below, you can see what approximate loads the support will withstand with these quantitative values.

Types of garden swings made of wood

Swings made of wood are distinguished by a variety of shapes and methods of construction. We propose to draw your attention to the proposed options for country garden swings made of wood, each of them has a number of advantages and disadvantages that must be considered before starting construction.

By installation method

According to the installation method, the swing can be:

stationary
portable
suspended

Summer swings for summer cottages can be stationary - this means that when installing them, you assume that they will stand exclusively in one place (a columnar foundation is laid). Such a building is reliable and strong, it will last a long time. The minus is obvious: it will be problematic to move the swing from the place.

Such a swing is more mobile than the previous version. They are mounted on a pre-prepared support, and, basically, they differ both in a high degree of transportation and in the possibility of folding, for example, for transportation to another place of rest (not all wooden structures have this property).

Aesthetic appeal and ease of operation make this type of swing especially desirable for installation on the site. A significant disadvantage may be the insufficient strength of the proposed support - in other words, on your site you must have a tree of the required size. Often, hanging swing with a wooden seat are installed for children - tree branches are able to withstand their weight without much difficulty.

By destination

A swing for the street to the country house can also be divided according to its intended purpose. Not every design is suitable for operation at the same time even by two people. This classification implies a division into swings:

family;
for kids;
for adults.

	Family swing. They can easily accommodate up to 4 people. They are based on a large bench, which helps to easily place both children and adults on a swing. Powerful fasteners must be installed on the structure and they must be made of durable wood.
	Wooden children's swing. This is a small design designed for light weight - most often they are designed for one or two places, and you can swing on them quite high. These are installed more with an entertaining than a relaxing function. An important component is the safety elements - a comfortable backrest and handrails that will help fix the position of the child.
	Outdoor swing for adults. They are considered one of the indispensable attributes of a site equipped for recreation. Such swings cannot swing widely, but in most cases they have canopies, which makes it possible to enjoy your vacation even in rain, wind or the scorching sun. Sometimes insect nets are attached to such swings - they become like tents, and can compete in comfort even with gazebos.

Properties of different types of wood

A few words should also be said about the types of wood, because not every wood is suitable for creating a swing, because such a building must not only resist the challenges of nature, but also withstand certain loads every day. The tensile strengths of different types of wood are shown in the table below.

	Larch	Pine	Spruce	Oak	Birch	Aspen
When compressed along the fibers	64,5	48,5	44,5	57,5	55,0	42,5
When stretched along the fibers	125,0	103,5	103,0		168,0	125,5
When growing across the fibers radial	5,6	5,4	5,0	8,0	11,1	7,1
When growing across the fibers tangential	5,2	3,5	3,2	6,5	6,5	4,6
With static bending	111,5	86,0	79,5	107,5	109,5	78,0
When folded along the fibers radially	9,9	7,5	6,9	10,2	9,3	6,3
When folding along the fibers tangentially	9,4	7,3	6,8	12,2	11,2	8,6

Wood is also chosen because of the texture - the pattern on the cut, which is obtained when the fibers or growth rings intersect. The texture is closely dependent on the type of wood: in conifers it is simpler, in deciduous it is very diverse. Here are the textures of some rocks:

An important physical factor is the gloss of wood. The greatest brilliance is distinguished by structures made of beech, oak and mahogany (otherwise - mahogany).

Do-it-yourself single swing made of wood

If you are interested in quality construction, then you should pay attention to the instructions and advice from experts. How to make a garden swing with your own hands from wood, we will now describe in detail.

You should start with the fact that a single swing for a garden made of wood is not designed for a large seated weight (up to 120 kg). Most often they are installed for young children. If you decide to install a children's swing, then, among other things, you need to consider a protection system for the baby in order to avoid falls and injuries.

Drawing and project

Do-it-yourself drawings of a garden swing made of wood will be necessary for a more detailed study of the appearance of the structure. The diagram should show:

overall length, width, height;
height of vertical columns;
vertical beam length;
the length of the mounting bars supporting the vertical posts;
the distance between the seat and vertical beams on both sides;
distance from the seat to the ground.

We have prepared for you a project and a drawing of a wooden swing, check it out below.

It will be important to indicate the thickness of the board and the area on which the swing will be located. It is best to create a drawing from several angles - the better you approach planning, the less likely there are errors in the calculations in the future.

Step-by-step instruction

You need to start building a swing for a garden with your own hands by choosing a place. Preferably the terrain should be free of holes and mounds. Otherwise, the swing will be uneven.

	We construct side vertical pillars. To do this, take two bars 3100 mm. The length of the bars (side "a") can be calculated knowing the height of the swing (side "b") - 3000 mm and the angle at which the bars are connected at the top point - 30 degrees (β). The formula looks like this: Base length - 1560 mm.
	Now, between the vertical posts, we push a horizontal beam (a chain with a seat will be attached to it in the future) with a length of 3000 mm. After that, we drill a through hole from the upper edge of the support post and screw in a screw with a nut, strengthening the structure.
	We tilt the structure on its side and drill two through holes in a horizontal beam at a distance of 750 mm from the edges (for the construction of a suspension). We screw the bolts with a washer into them, we wind the eye nuts onto the ends. Now we raise the support to the legs.
	Wooden spacer bars should be installed between the standing bars. We will fix with the help of metal corners and 5 mm screws. We fix the upper spacer with the help of corners.
	In this project, we mount the swing without installing a concrete base, so we cover the bars with bitumen to extend their service life. From above we cover the tree with a stain to give it the desired color.
	Let's take a seat. For the back we make bars with dimensions of 30x13x457 mm. For the seat frame, use bars with dimensions of 51x152 mm. You will need two such frames (seat and back). Attach the slats to the frames and tighten the seat and back with the help of corners. For convenience, you can nail the armrests to the seat. We fasten eye bolts to the sides (2 pieces on each side - one to the seat, one to the back).
	Let's put up a swing. We attach carabiners to the eye nuts and then attach two chains. The length of the chain that is attached to the seat is 1650 mm, and the one that is attached to the back is 1200 mm. Calculating the distance is quite simple, it is only important to remember that a sitting person should reach the ground with his feet.
	Since sitting on a wooden seat is not very comfortable, we advise you to sew special covers that can be removed and washed at any time.

In order for both racks to have the same angle of inclination, we recommend that you first lay out the structure on the ground and then outline the necessary boundaries

Do-it-yourself swing from timber and logs

Timber is a material in which reliability is successfully combined with an attractive appearance. From it you can easily make a swing for both children and adults. Due to the fact that this material is quite massive, do-it-yourself wooden swings can turn out to be as beautiful as purchased ones and as strong as iron ones.

Advantages and disadvantages

Let's decide on the main pros and cons of a log swing. Let's start with the positives:

the swing is stable;
such structures are difficult to damage not only to people, but also to adverse weather conditions, for example, strong winds;
attractive appearance. As a rule, such swings look quite impressive, which makes them a real decoration of your garden plot.

Disadvantages, alas, are also present: a tree, as you know, is very sensitive to all kinds of insects, and protecting logs from pests is somewhat more difficult than ordinary boards. Wood, among other things, tends to rot over time.

Antique wood swing

If you want to make your yard a work of art, we recommend that you pay attention to the stylization of antique wood swings. For this you need:


	2. Make notches and notches on all swing beams.
	3. Cover with the first layer of stain, let dry, then cover with one more layer and leave until completely dry.

Let's make a garden swing with our own hands step by step

We suggest you build a wooden swing in the form of a bench, which are shown below.

First, prepare a flat platform for the swing. Use a building yardstick and pegs to mark the boundaries of your structure. Study the drawing of a swing made of timber with dimensions that we have compiled before proceeding with installation.

It is necessary to prepare material for installation. You will need 4 beams 2070 mm long and 100 mm in diameter. They will be the support of the structure and are connected at an angle of 30 degrees in the form of an isosceles triangle (letter A). Base length - 1035 mm. The length of the partition at the base is 1035 mm. The length of the A-shaped partition is 455 mm (20 mm protrusion on each side). The width of the structure is 4500 mm, the width of the bench is 1500 mm. The diameter of all bars is 100 mm (it is not clearly visible in the photo, but we recommend using this particular size).

	We make vertical racks for a swing. We take two beams 2070 mm long and place them on the ground in the form of an isosceles triangle. After that, using a compass and a pencil, we mark out a single circle on two bars with a diameter of 100 mm (each bar should have a semicircle with a radius of 50 mm). Using a grinder, cut out the marked area and sand it. We check how the horizontal beam fits into the recesses, if it protrudes, we file a little and clean the vertical racks. We do the same with the other side.
	Now we put the racks vertically and fix the horizontal beam with long bolts with washers and nuts. Fasten on the other side in the same way.
	We make horizontal partitions. On vertical racks we make recesses with a chisel and a hammer. It should turn out like in the picture.
	The first partition is A-shaped. To begin with, it is necessary to make a recess in it, since a diagonal support will enter it. We make a recess in the vertical pillars (for the upper and lower partitions). Next, we adjust the diagonal bar to fit the hole in the A-shaped bar. At the end, we cut it off at the end at an angle of 45 degrees and fasten it to the bolt.
	The top brace should be 1110 mm from the base, the bottom brace at a height of 50 mm. . We put the structure on its feet. At a distance of 1500 mm from the ends, we drill a hole and thread two bolts. We twist everything with eye nuts.

Swing in the form of a sofa

This type of swing really impresses most summer residents with its attractive appearance. We will not consider how to make a swing sofa for a summer residence with our own hands, step by step, because. have already described how to make wooden supports, and this is 75% of the structure. Using the drawings provided by us, you can make stand-ups for such a swing. However, we will dwell on sofas for such swings in more detail.

Tips for building a sofa swing with your own hands

Such swings need to be varnished from time to time - this will protect them from both insects and cracks.

Pallet swing

A swing in the yard from a pallet for a summer residence is a success with those who know a lot about saving and design ideas- such a design will be inexpensive, and will attract attention from neighbors. How to make a swing from pallets with your own hands? Let's deal with this issue.

Which pallets to choose for a swing

Garden swings can be made from virtually any pallet. There are three types of pallets:

European (1200x800);
Finnish (1200x1000);
American (1200x1200).

The latter are the strongest of the presented, but at the same time the heaviest. Finnish swings are best suited for swings - they are equally strong and light. It is advisable to use new pallets, but if you don’t have any at hand, you can use used ones, having repaired them in advance.

Rigidity. Pallets must retain their shape during deflection and not break, otherwise the swing is unlikely to support the weight of even an adult.
Price. No need to spend a large number of money for the purchase of pallets, as well as not need to save too much on their purchase. Here you should stick to the golden mean.

Do-it-yourself step-by-step instructions for swings from pallets

A simple but very comfortable design is a pallet swing sofa. Prepare pallets for work. Remove excess debris and excess nails from them (if pallets have been used before).

	We are preparing a general drawing-project of a swing with a seat and a frame. In this case, the width is 3000 mm, the height is 3000 mm, 4 crossbars are used as a-shaped supports, set on two sides in the form of isosceles triangles at an angle of 30 degrees at the upper attachment point. (the shop is not the same as in the drawing, but the same size. The correct shop is in paragraph 2).
	Explore detailed drawing the swings themselves from pallets, provided by our editors.
	We cut the pallets according to the drawing with an electric jigsaw.
	We knock down two pallets with nails between each other, as in the photo. If two pallets are taken for the seat, then take care of the load-bearing logs nailed from below (they will take on the weight of people).
	Make armrests. We use 4 bars of 80 mm in height and 35 mm in diameter. Nail them to the seat as in the photo. On top of each side we nail two boards, pre-sanded. We wind the eyebolts, on which the chains will subsequently be attached.
	We make vertical pillars. The creation scheme is the same as in the previous cases - we cut off the edges of two inclined beams, and put a horizontal beam in the center. Then fix with screws. We strengthen the edges of the horizontal beam with metal corners.

For decoration, you can put a few pillows on the seat or sew a separate cover so that you can comfortably spend time on the swing.

Double outdoor swing

Double outdoor swing on wooden posts - an option for a family where children do not want to ride in turns at all. They are just as easy to make as singles, you just need a little more time.

Double street swings also require additional calculations - in the drawing for the project, do not forget to consider the location of the seats so that they do not touch each other when swinging.

If the swing is a solid bench, then keep in mind that they will be quite heavy, so you should calculate the load on the mount in advance. We advise you to study the table provided in the section “strength calculation for wooden swing beams”. Structures of this kind have their own characteristics:

Wider top bar. If the seats are not connected to each other, we recommend making a length of 4500 mm, if the seats are connected - 3000-3500 mm.
Reinforced base (columnar foundation).

Materials and tools

We propose to make a double garden swing for a summer residence original - for two children with separate seats. Thus, children will get maximum pleasure while relaxing together.

Instruments:

shovel;
building meter and pegs;
manual drill;
bucket;
capacity for mixing concrete;
saw or grinder;
hammer (normal and rubber);
drill with drills;
wrench;
grinder with a disk for metal;
welding machine;
screwdriver

Materials:

bars 100x100x3000 - 4 pcs;
timber 70x200x4000 - 1 pc;
bolts with eye nuts;
carabiners for chains;
metal chain 3000 mm long;
plywood sheet 3 mm;
paint (blue, red);
corrugated pipe 10 mm and 50 mm thick.

Step-by-step instructions for a double street swing with your own hands

Building a swing for a garden with your own hands begins with choosing a suitable place on your site. Make sure that the area is open and permanent buildings are at least 5-7 meters from the site.

	1. We are preparing a project. After that, on the site we mark the boundaries of the swing with pegs. To make the design more attractive, you can paint it in bright colours, but more on that later.
	2. For the upper part of the swing frame, we use a professional pipe with a diameter of 50 mm. It is necessary to weld two parts 600 mm long at an angle of 45 degrees to the crossbar (if it is from a professional pipe) to get an isosceles triangle. If the crossbar is made of timber, then we use nuts and bolts, pre-drilling holes of the desired diameter. At a height of 250 mm from the base of the tubes, weld a spacer so that an A-shaped structure is obtained as in the photo. If you use a crossbar made of timber, then it will be able to withstand a weight load of about 250 kg.
	3. We drill 4 holes for bolts with eye nuts.
	4. It is necessary to prepare vertical supports from a bar for a double garden swing. We attach them to the triangles from the professional pipe. We drill 5 holes in each triangle and tighten the screws. We do the same with the remaining legs. At the end, we cover the lower part of the bars with an antiseptic for a longer service life.
	5. We take plywood and a jigsaw. Using a pencil, draw an equilateral triangle with sides 600x600x500 mm. Cut out the triangle and round its corners. After that, using self-tapping screws, we attach to vertical bars by closing them.
	6. Now you need to make a columnar foundation. Via hand drill we make holes with a depth of 400 mm. At the bottom we fall asleep a layer of sand (100 mm). Next, install the legs of the swing and pour the concrete solution. We are waiting for 2-3 days until it hardens.
	7. Installation of seats. To do this, take several steel rods with a diameter of 10 mm and bend them as shown in the figure. Then, by welding, we combine them into a single structure. At the top, along each of the edges, we weld fasteners for chains. Repeat the process for the second seat.
	8. Finally, you need to connect the seats to the upper horizontal beam using chains. We measure 4 segments of 1800 mm. Next, we attach with the help of carabiners to the eye nuts. It remains to decorate the swing. We take blue and red paint and paint the seats, as well as the racks. Let dry for a day and enjoy.

Wood swing balancer

You already know how to build a swing for a dacha with your own hands, but if you don’t want to deal with suspended structures, then we can offer a balancer-type design - an option for sharing leisure time with a child or for general children's entertainment.

Features of balancers

Children's homemade wooden swings of this kind are good because they are difficult to break or damage. At the same time, it should be borne in mind that such entertainment is only suitable if you have two children or you are constantly focused on playing with a child, since it makes no sense to ride a balance beam on your own.

In addition, balancers are several times more traumatic than conventional designs, and therefore it is not necessary to neglect safety rules when using them. For balancers in safety frames, handrails and backrests are made.

Step-by-step instruction

Do-it-yourself swings on the street are done as follows:

	1. Draw a drawing of your future swing-balancer. Specify the dimensions of all structural elements, as well as angles and radii.
	2. Take a board 1500 mm long and sand it with sandpaper. Next, you should cut out small recesses 20 mm thick and 100 mm wide. The recesses should be located 280 mm from the ends of the board.
	3. We cut out the details for the recesses with the dimensions as in the drawing.
	4. Now you need a board 20 mm thick, measure as shown in the figure. Next, using a saw, cut off unnecessary parts of the board. At the end, take a brace and drill a hole. We sand it. After that, using self-tapping screws, we fix the parts to the recesses.
	5. We make vertical posts for the base of the swing. We take a board 650-680 mm long, 50 mm high and 60 mm wide. We sharpen the end of the board in the form of a stake with the help of an ax, at the other end with the help of a brace we drill a hole with a diameter of 25 mm.
	6. We take a device for attaching the board to the support posts with dimensions of 40x60 mm and a length of 160 mm. We sand and rub the ends in such a way that we get a pointed rectangle. Then, using a saw, we saw off a small piece from the end 3-5 mm long. We do the same on the other side. Next, using a long 25 mm drill, we drill through
	7. Now you need a steel bar with a diameter of 24 mm and a length of 180 mm. Using a die, we make threads at both ends by hand. Thread length - 5-6 mm. We drive it into a drilled 25 mm hole in the bar so that it fits very tightly;
	8. We assemble the structure. Connecting long board and the bar together with the help of bolts (we drill a hole through and connect). We drive the rod into vertical posts and tighten the nuts. For more strength, you can weld them on.

The assembly of the wooden garden swing is completed - now you and your children can enjoy the new toy in the yard!

Board swing - the easiest option

A few words about how to make a swing from boards in the country with your own hands. More precisely from a single board. The design is one of the most popular among summer residents and country builders.

Assembling a wooden garden swing usually requires some amount of time and materials. Here you only need one board and a rope. We will fasten this structure to a tree (an oak or any other massive tree will do).

Unusual swing options

If you want to make something special for your children, we recommend that you pay attention to the unusual designs of homemade garden swings for summer cottages. Their main difference is in the material that is used either for the seat or for attaching the seat to the frame / wood.

You can create a swing with your own hands in a tire garden, for example.

An excellent option for a wicker round swing is a tire suspended from several fasteners with a rope or chain. In order to make such a design, you will need to punch the tire through and through the resulting holes to thread a rope or chain, securing it.

Another unusual swing option is floating benches. These are the most common benches suspended from a tree on ropes or chains. We recommend making such a garden swing from rattan or vines and then hanging it by carabiners from the ceiling of your veranda or on a tree.

Another option is to make a swing in the form of some object, such as a car or an airplane. It will take more time for such a design, but in the end your children will constantly play on them. To do this, you will need to spend a lot of time on the manufacture of individual parts, as well as connecting them together. However, the result will justify all your efforts.

Decoration and arrangement

Wooden swing for relaxation can be decorated different ways. It could be like decorative pillows thrown on the seats, and intricate carvings along the edges of the bars. Lamps next to the swings, including floor lamps, look especially impressive. There are options to experiment with the rope - perhaps it can be braided with something bright.

Finishing Features

A beautiful wooden swing cannot be imagined without decoration and decoration. At the same time, even a non-professional can try himself as a carver - for this you need to have an electric jigsaw and a little imagination. Remember that hardwoods are somewhat easier to work with - although they are more reluctant to finish, the end result will look much better.

You can paint the swing with the following materials:

wood/metal paint;
stain;
antiseptic.

Painting

It is best to paint a garden swing immediately after filling. Paint should be chosen specifically for wood - it will not only lie better, but also protect the material from pests. At the same time, the paint, unfortunately, is not so durable - the swing will have to be repainted every few years.

Paint is considered a good protection against pests and insects, and the look of a painted swing is aesthetically pleasing.

Choice of covers, mattresses and pillows

Swing covers are most often chosen bright colors- there is no error in this, but it should be borne in mind that the material may fade in the air. It is best to choose fabric for garden swings from those that are considered waterproof (like a tarpaulin or raincoat fabric). There is no chance that you will always take the pillows into the house on time, and the rain will not be so terrible for canvas, and it is much easier to dry them later.

Pay attention to the fact that people will come into contact with the fabric, and not only natural factors - in order to sit on a swing not only comfortable, but also pleasant, you need to make sure that natural raw materials are present in the fabric - for example , cotton or viscose.

The dimensions of the cover should be 3-4 mm larger than the parameters of the seat so that you can adjust the cover. To attach the cover to the bottom of the wooden seat, we recommend using a construction stapler.

swing seat

If you don’t want to buy seats in the store, we suggest considering the option of how to make a swing seat with your own hands using improvised means. Pay attention to the fact that wooden seats will be more advantageous than metal ones - they are safer and more comfortable. On the other hand, their strength will be constantly tested, and it would be good to take this fact into account when designing. For a comfortable ride, it is recommended to sheathe the seats soft cloth It also helps to avoid unnecessary injury.

Types of seats for swings

According to the design of the seat for the swing, they differ:

with a back - for both children and adults;
without a back. Relevant for teenagers - for kids it can be too dangerous;
with armrests and without them;

By size:

for garden swings - in the form of a bench or sofa;
single seat for an adult or teenager - no more than 600 mm in width;
for children's swings - single with a width of not more than 500 mm, or even less.

According to the material of manufacture:

plastic;
tarpaulin;
wood.

How to make a DIY swing seat

Do-it-yourself swing seat is extremely simple. You can knock it down from the boards:

You will need:

	Prepare the seat frame. To do this, sand all the bars and then knock them down with nails (or screw in screws).
	Nail the horizontal bars. The distance between each bar is 3 mm.
	Attach the bars to the seat, each of which is attached to the crossbar for the armrests.
	We recommend fixing the back at an angle of 110 degrees.

The seat is ready. After that, it is best to cover it with a special septic tank or stain / varnish.

If the seat on the swing that you made turned out to be unreliable (or you see that it will soon become so), then it is worth repairing it.

The most important thing is to remove the fabric and patch up the holes, after washing it. You can use raincoat fabric or other strong material to patch holes (if the seat on the garden swing is torn). Often, funny applications are attached to the place of the holes - they are sold in the store.
Repair of a seat on a garden swing can be completely cardinal: you can remove the seat completely and wrap the frame with a nylon cord. You will ride on such a swing for a very long time - the cord is very strong, and in which case, it will not take as long to make a constriction as to do patching.

How to fix the swing to the horizontal bar?

We discussed how to assemble a country garden swing - it's time to clarify how to fix them. The dimensions of the drill, bolts and nuts, depending on the design of the swing.

If you are attaching to a horizontal bar from above:

We drill a hole through with a drill;
We insert a bolt with a washer;
We wind the eye-nut from the underside of the crossbar.

If you attach to the seat:

We drill a hole for fastening;
We pass a bolt with a washer;
We screw in the eye nut.

To prevent the nut from being pressed through, it is advisable to put a washer under its cap.

In the store you can find special mounts of various shapes and devices. There is only one drawback to such a mount - the swing begins to seriously creak during operation if the mount is not lubricated in time.

Outdoor swing roof

A do-it-yourself roof for a swing in the garden is done almost as quickly as the swing itself. When creating a roof, it is best to focus on the shape of the building and its purpose. Consider several options for materials for a wooden swing with a roof for the garden.

How to care for a swing

During construction (as well as during subsequent operation), it should be borne in mind that a tree for a swing does not differ in the same strength and reliability as, for example, metal. Therefore, you need to pay attention not only to how you will bring down the swing, but also to how to properly care for them.

Once every few years (usually a period of 3-4 years is taken as a basis), it is desirable to treat the surface special tool against decay.
With some periodicity, we advise you to repaint the structure, refresh the colors.
Do not forget about metal parts (for example, handrails on swing-balancers) - they will also need to be treated with a rust and darkening agent.
Fabric covers should be washed periodically - once every one and a half to two months.

What and at what price to buy a wooden garden swing for a summer residence?

At the end of our material, we have prepared a small selection so that you have an idea how much a garden swing costs and which one is better to buy. Let's start with the most expensive and elite.

Name	Price	Description
	308 100 rub	Construction dimensions: 290x190x210 cm. Permissible load 300 kg. Made of larch (laminated timber). The frame is varnished, and all materials are environmentally friendly. VIP option for elite sites.
	RUB 172,900	The dimensions of this garden swing are 264x180x207 cm. It can withstand a maximum load of 300 kg. Made of coniferous wood, all materials are environmentally friendly.
Garden swing “Aristocrat”	RUB 106,799	Dimensions 224x167x200 cm. Withstands 200 kg. environmentally friendly luxury furniture, made from solid spruce. Additionally covered with antiseptics that protect against decay.
	RUB 95,401	It has dimensions: 250x155x245 cm. It can withstand a maximum load of 200 kg. Made of natural coniferous wood, covered with acrylic lacquer.
Outdoor swing Kampfer Talking	47 039 RUB	Swing dimensions: 240x260x240 cm. The maximum allowable load is 150 kg. The posts are made from cedar. The kit comes with an awning.
Swing Gloria	30 676 rubles	Dimensions: 221x265.5x212.5 cm. Maximum load capacity 200 kg. Also treated with special impregnation and moisture.
Garden swing Avola	23 690 rubles	Dimensions: 208x165x204 cm. Made of solid timber (pine). Oxford fabric awning. The swing is treated with compositions against moisture and drying out.

Swings in children and adults at the same time cause a feeling of delight and peace. But to do it yourself for a summer residence is not just a seat suspended on strings, but a real one. comfortable sofa, not an easy task. Here you need to think a lot in advance: choose the right place on the territory of the dacha, calculate the load (about 150 kg), the width of the bench, find strong material for suspensions and supports.

The design of the metal frame would fit perfectly - it is compact, strong. But not everyone knows how to work with this material with their own hands. Therefore, most often independent production swing sofas for summer cottages are made of wood.

Robust design for adults and beyond

We propose to assemble with your own hands the optimal model of a swing sofa. It is not too simple, but comfortable, reliable, there is nothing superfluous in it. Follow the instructions, show a little patience, diligence - your loved ones will appreciate the efforts, and the result of the work will please you for a very long time. In addition, if you want to get a good thing, take care of the quality of the materials used. Carefully consider the choice, give preference to dry and even lumber with the most dense texture. Swings are installed in the yard of the cottage, they remain there in summer and winter, in the rain, snow, sun, etc. Therefore, in order to last for a long time, fittings and fasteners must withstand not only heavy loads, but also have a protective coating.

We make a seat

First you need to make the wooden sofa itself, that is, a spacious seat with a back. In fact, this is the main detail. In the end, it can be hung on a branch of a large tree or on the porch of a summer house.

You will need tools:

Miter saw;
jigsaw;
electric drill with drills;
a device that helps to connect parts using confirmations;
protective equipment - gloves, goggles;
roulette;
level;
stain, paint.

Prepare lumber, preferably from pine, cedar, and other softwoods. By letter designations, you can easily find every detail of the design:

4 long pieces (A) for 2 frames of 2x3x60 inches (5.08x7.62x152.4 cm);
4 armrest holders (B), 2 pieces 2x3x13.25 inches (5.08x7.62x33.655 cm), 2 pieces 2x3x11.5 inches (5.08x7.62x29.21 cm);
2 armrests (C) 2x3x23.5 inches (5.08x7.62x59.69 cm);
7 long swing seat bars (D) 1x3x60 inches (2.54x7.62x152.4 cm);
2 short back frame pieces (E) 2x3x22.5 inches (5.08x7.62x57.15 cm), 1 piece - 2x3x60 inches (5.08x7.62x152.4 cm), 1 piece 2x6x55 inches (5.08x15.24x139 .7 cm);
10 back slats (F) 1 x 3 x 14 inches (2.54 x 7.62 x 35.56 cm).

When preparing to start work, be sure to grind the cut blanks. Do not forget to pay attention to the ends - they should be smooth and even.

Description of work

First of all, you need to make a swing bench for giving with your own hands. We will assemble the lower part of the sofa from two 60-inch and four 17-inch parts. First, drill holes for confirmations, observing a right angle. To strengthen the structure, use glue with waterproof characteristics, lubricate all surfaces to be joined. Then proceed to fixing the parts with galvanized screws. This is a good choice, as the coating will protect metal products from corrosive changes under the influence of moisture, temperature changes.

It is necessary to make supports for the armrests at the ends of the frame. To make the arrangement more convenient, cut off some of the tall elements for a slight bevel (toward the back) of about 7 degrees. Install the supports by fitting them firmly against the tabs of the long frame members. Screw in the galvanized screws, having previously smeared the joint with waterproof glue.

Assemble the back frame. To do this, on 3 outer parts, you should make cuts at an angle of 45 degrees with your own hands. Then alternately drill holes for zinc-coated confirmates with a drill, cover the surfaces to be joined with a waterproof adhesive and immediately install the screws.
Using a tape measure and a pencil, mark the inner ends of the upper and lower parts of the frame to evenly place the planks between them. Check if the marks are correct by placing the board.
When attaching the seatback, it is necessary to make a rigid connection at a slight inclination. You will have to carefully cut the part of the box closest to the back and the seat lamella, longitudinally beveling about 7 degrees. Align the parts, connect with glue and galvanized screws.

Attach the long slats to the finished swing seat frame. In the place of contact with the armrest supports, the lamellas must be cut. Attach the lamellas to the frame with glue and galvanized confirmations, after making holes with a drill.
Round off the outer edges of the armrest blanks. This will give accuracy to the product and make it safer by eliminating sharp corners. Trim the armrests from the back with a 7 degree bevel. Smooth out all of their ends. Prepare holes for confirmations, countersink them, apply glue and make connections using galvanized Euro screws.

It's time to move on to building your own support. This is the load-bearing part of the entire design of the swing sofa for giving, which carries the entire load, therefore it must be made of appropriate materials. We make the base of a strong wooden beam, and the fasteners and suspensions are made of galvanized metal.

Tools and materials

Use the main type of lumber for do-it-yourself assembly of the swing sofa support wooden beam section not less than 4x4 inches (10.16x10.16 cm). From it, cut blanks, the location of which is shown by the diagram below the list:

4 long supports (A) measuring 106 inches (269.24 cm);
2 lower cross mounts (B) 33" (83.82 cm) long, 2 upper - 11.5" (29.21 cm);
2 corner bars (C) 30.5 inches (77.47 cm);
1 crossbeam (D) 108 inches (274.32 cm) long.

If you want to change the dimensions of the proposed product to suit your dacha, this can be done by making adjustments to your scheme. But the distance between the edge of the seat and the side support should not be too small. This can be traumatic for children, and when rocking, the sofa will hit part of the supporting structure.

When assembling with your own hands, you will need almost the same tools that you used to create a wooden swing sofa. In addition, it will be useful:

metal fittings for fasteners;
shovel, for digging holes when installing the finished product;
concrete to fix the swing racks, to give them stability.

Description of work

We start with the A-frame. Trim the bottom edges of the supports approximately 17 degrees. If you need a different angle, please. But make sure that the structure remains stable.
Make cuts in upper parts both supports. First, mark the cut lines on the bars. Then use a circular saw to remove any excess. It is difficult to do such work with your own hands with ideal quality, so use grinding to make the surfaces smooth.
The next step in the project is to connect the A-pillars in pairs. To do this, put them together, try on at what angle to make saw cuts in transverse fasteners. If you measured 17 degrees at the bottom of the racks, then the same amount will be needed here. After the final fitting of the parts without gaps, prepare holes for confirmations in the racks and transverse fasteners. Make connections using 2 galvanized screws for each, pre-coat the joints with waterproof glue. Using clamps or other holders, fix the fasteners until they are fully bonded, the glue dries.

Having assembled the A-pillars, you need to take care of their reliable installation. This is a question of the integrity, functionality of the product, and most importantly, the safety of its use by adults and children. Most reliable way fixings - concreting.

Dig holes in the ground at least 0.5 meters. Place the ends of the supports in them. Using a level, adjust the bars so that the A-pillars take up correct position. Temporarily secure it with brackets. Fill the holes with concrete, level the outer surfaces with a spatula. Leave for several hours until the solution is completely dry.
After the concrete has dried, install the top beam into the prepared grooves of the A-pillars. Check: the angle between the beam and the support must be right. Attach the ends of the beam to the side posts with glue and 6 galvanized confirmations. Level check the horizontal position of the beam.
To strengthen the supporting structure, increase rigidity, we fasten its corners with supporting bars. First you need to make 45-degree bevels at the ends of the blanks, and do not cut to the end on the lower parts to get a groove for a strong stop (see the diagram below). Then prepare holes on the parts at the joints. Install the bars on the glue and euro screws.
Pay attention to the finishing of the swing, give it a gloss. Fill up irregularities, sand rough places, smooth sharp corners. Cover the product with stain. Then a layer of varnish or paint.
Use a reliable chain and metal fasteners to hang the garden swing sofa on a support.

To make riding on a swing more pleasant, sew a bright removable mattress on the sofa with your own hands, matching the color of the pillows. Soon your creation will become a favorite vacation spot in the country.

Today, swing sofas are again in our everyday life, while in the most non-standard solutions and design ideas. Often, when arranging a room for their child, most parents order the manufacture of a unique hanging sofa that is attached to the ceiling. Such a mini-sofa, which smoothly swings, delivers a lot of joy and pleasure, both to your child and to an adult. If you remember, then all children subconsciously get used to rocking while still in their mother's womb - this calms them and gives them peace.

Where swing sofas are appropriate

Not only children, but also adults cannot deny themselves the pleasure of sitting on a swing sofa, which is located in the garden, under the crown of an old oak or lush birch. Oriental, colonial or modern style such a swing can make the children's room more functional and attractive.

How to make a garden swing sofa

The most popular type is the garden swing, which fits seamlessly into any garden interior. They can be built independently, you just need to choose the right materials.

To make a garden-type swing sofa, you will need a massive strong beam, a set of screws and self-tapping screws to fasten the entire structure, as well as plywood sheets and bars for the armrests and backrest. You will definitely need to choose a reliable cable that will be made of metal or another synthetic fiber, or you can simply use a chain with large links.

Initially, the support structure of the sofa swing is assembled, then all the details are attached and fixed with screws. To decorate such a garden swing, a variety of pillows of different sizes and colors are suitable - it all depends on your desire. A light mattress and blanket can complement the design of the swing and are indispensable items if you decide to spend the night outdoors.

No less popular are hanging swing sofas, which are mounted under the ceiling in the house. You can optionally order the production of a hanging swing bed for the bedroom - This bed will give you a comfortable sleep. This option will give your bedroom a special chic.

How to choose a swing sofa

The design must be as reliable as possible. Every detail is of high quality and durable, and the installation can only be trusted by professionals.

By purchasing pendant model sofa swings, opt for a model that suits your style. The swing can be fixed in one place or later moved if desired. When choosing a color, keep in mind that the most easily soiled are light and dark tones.

Be sure to consider the maximum allowable weight for the swing. If several people will ride at once, then the design should be highly stable and roomy.

Pillows with removable covers are suitable as decor, which are easy to remove and wash. The frame material is also important. It is better to choose a noble tree so as not to worry about the purity and safety of the product.

Sofa swing: photo

Being engaged in the arrangement of your home, do not be afraid to move away from the standards, use bold design solutions!