Do-it-yourself wooden swing. How to make a garden swing with your own hands: useful tips, step-by-step instructions and subtleties of work Make a wooden swing with your own hands

Building a swing with your own hands will allow you to create a universal relaxing tool and provide a good rest in the country or in country house.

The presence of free space in the country or personal plot gives a lot of advantages. Some prefer to set up a vegetable garden in its place and enjoy useful properties hand-grown vegetables. Others prefer to equip it as a recreation area by building a garden shed and ennobling it. All of these options have their advantages and are safely used to fill the site. In turn, the creation of a comfortable and practical place for outdoor recreation allows not only to optimize the territory, but also allows a person to isolate himself from the everyday bustle.

Varieties of swing

Garden or country swings create additional comfort on the site. At the same time, such a device will appeal to absolutely everyone, from small children to adults. For children, it is entertainment that can brighten up their leisure time. In turn, they bring relaxation and comfort to adults, which is extremely important in today's fast and ever-rushing world.

Similar products can be purchased from ready-made in almost any building supermarket or order them on the Internet. Having made a purchase in this way, all that remains is to install the structure, and even then some organizations offer to do it on their own. Such a solution makes it possible to obtain a full-fledged street swing in the shortest possible time, but it also requires large material costs, which is far from always relevant in conditions modern realities.

An alternative to a similar solution is the construction of a swing with your own hands, which allows you not only to save a significant part of the material resources, but also makes it possible to independently choose the shape and design of the future building. As a rule, such systems are made of two types of materials, which are inevitably available on the backyard or suburban area. These means are wood, metal or their combination. In most cases, it is with the help of these materials that garden swings are erected.

It should be taken into account that a modern swing for your own garden can be very various forms and dimensions, since the main criterion for their creation is your own imagination. This gives room for experimentation and sometimes leads to the formation of completely unprecedented forms. What are the sofa swings that are rapidly gaining popularity these days. In general, the highest demand in modern world use the following options for country swings:

traditional;
nest swing;
cocoon swing.

At the same time, the most popular is still the traditional version, the creation of which with my own hands we will consider further.

Do-it-yourself swing: stages of work

As mentioned above, most often do-it-yourself swings are made using wood or metal, since these materials are the most affordable and inexpensive. In addition, they guarantee an optimal product, which will be characterized by increased durability and comfort. To impart these qualities to the future design, one should take the development of the project and its subsequent implementation with great responsibility. Generally, hanging swing do-it-yourself should be carried out on the basis of the following scheme, which most fully and in detail describes the entire procedure for carrying out work. It consists of the following steps:

preparatory work;
drawing up a principal plan;
collection of tools;
installation of racks and crossbars;
creating a seat;
final assembly of the structure.

Building a swing in your own garden on the basis of the above plan makes it possible to significantly save work time and at the same time get an excellent result. At the same time, the creation of similar structures with your own hands will be impossible without the skills to work with tools and a clear understanding of the purpose of each process. It follows that before starting the construction of a swing, it is necessary to decide on their final design and application. This is the only way to be sure of the reliability of the future product and its practicality.

Preparatory work

How to make a swing in the garden? Initially, before carrying out the work itself, it is necessary to prepare. You should select the place where the structure will be installed and create optimal conditions for its construction. At the same time, determining the place of construction of the building plays a huge role, allowing you to obtain additional characteristics of comfort on the site. So, building away from the recreation area is unlikely to create the best ratio of comfort and practicality on the site. Therefore, the swing area should be located in close proximity to the canopy or even installed directly under it. After determining the location, it is necessary to prepare the site for work, which requires the following actions - cleaning the territory, leveling the surface and eliminating its defects.

As soon as this stage is completed, you can proceed to the next stage, which is to display the basic plan of construction. It can be based both on the compilation of a detailed visual model of the system, and represent an ordinary planogram. In general, do-it-yourself drawings are quite simple to create. Their main criterion is the choice of the correct aspect ratio and dimensions of the main parts. Also, this stage includes the choice of material for the construction of the structure, which can be a bar or metal pipes. In our case, the optimal solution would be to use a tree, so we will focus on it.

Wooden swings and their creation require the use of a fairly wide list of tools.

This aspect is due different types work and a large number of processes to be done. So, to build a swing with our own hands, we need the following set of tools:

shovel;
Master OK;
bucket;
hacksaw;
roulette;
pencil;
hammer;
screwdriver;
drill;
keys set;
plumb;
level.

As you can see, the above list is quite large, which causes the complexity of the upcoming work. At the same time, the collection of all the necessary equipment makes it possible to significantly reduce the total time for the construction of the object, so that the construction will be faster and more productive.

Installation of support legs and creation of a seat

Having finished the preparatory part, you can build a swing from a bar. To do this, it is necessary to dig four holes, in which support posts will subsequently be installed to ensure the stability of the system. There should be at least four of them - two on each side. In this case, the distance between them is determined by the height of the support and the size of the log swing as a whole. The same applies to the number of supporting elements. So, large and massive structures, which involve the creation of several places for skiing, require additional reinforcement, which is carried out by installing auxiliary support elements. As a rule, they are installed between the seats to provide optimal conditions for its movement.

In the process of creating a swing from a bar, wooden racks are poured with concrete in the shape of the letter "L", which provides them with additional reliability and stability. In addition, several transverse strips are fixed between them, providing an astringent function. As a rule, they are fixed in two or three places on the surface of the racks. At the same time, the poured supports must stand for several days so that the solution is completely dry and becomes monolithic. It should also be noted that in hot weather it must be periodically watered to prevent cracks and chips from appearing on it.

While the supports are hardening, you can proceed to the creation of the seat itself. Do-it-yourself wooden swings for summer cottages may involve the use of a variety of seat models. Recently, varieties such as a cocoon or a nest have gained particular popularity, allowing you to get a lot of positive emotions from the rocking process. However, their application is not as versatile as using a traditional seat, which is suitable for absolutely everyone, from the smallest to the elderly.

Therefore, our swing made of wood will be equipped with a similar kind of seat. To create it, you can use a variety of available tools available: old pallets or boxes. If there are no such materials at hand, then the seat itself must be made independently. In its structure, it resembles an ordinary box, in which one side is missing, and such a model is assembled quite simply - with the help of self-tapping screws and wooden planks.

Assembly and processing of the structure

When the supporting parts are completely settled, and the seat is ready, you can proceed to the last stage of building a swing in the country. It consists in the final assembly of all elements and the formation of a monolithic structure. It is necessary to start assembling a wooden swing with the installation of a longitudinal beam, which lies on the racks with its ends, as a result of which a crossbar is formed. It is on it that the seat itself will be fixed. For greater reliability, the beam itself is fixed with fasteners, ensuring its immobility and strength.

rope;
chains;
pipes.

Most often Garden swing do-it-yourself wood is created on ropes, cables or chains. At the same time, chains are distinguished by good performance, since they are the most durable and reliable products. Based on this, fastening for a swing in the garden is best done using metal chains. To do this, they must be fixed on the one hand on the surface of the crossbar, and on the other directly on the seat. As a rule, for maximum safety and practicality, the seat is fixed in four places with separate parts chains. Each one is attached to wooden base seats with metal bolts, and its ends are assembled in twos and are also fixed, but already on the surface of the crossbar.

In this embodiment, the swing is completely ready and can be used for its intended purpose. However, the appearance in this design leaves much to be desired, so they need to be decorated. To solve this problem, you can use a variety of varnishes and paints, which will not only make the swing more colorful, but also significantly increase the service life. Thanks to such rather simple manipulations, for many years to come she will be able to bring joy to all people who have a rest in their summer cottage or garden plot.

Photo gallery

We bring to your attention original photo ideas decorating garden swings.

Solid, suitable for the general style of the landscape, a wooden swing in a summer cottage is a joy for children and adults. Purchased public models usually do not differ in quality and variety. It is much more interesting and useful to approach the process on your own and make a country swing, giving your site a unique flavor. After all, there is nothing particularly difficult in this.

Wooden swings are divided into three main types:

- frame, standing on stationary supports (classic version);

Frame swing

- hanging on ropes or cables, such as "bungee";

Suspended swing, "bungee"

swing-"scales" or balancing. This type of swing is for two.

Any model is played up in such a way that all the neighbors will envy, and the household will choose their favorite corner of the garden or yard.

Where to place?

If the choice is made in favor of the classic "bungee", we hang it on the nearest tree, which inspires confidence in terms of strength. When choosing a place for other types of structures, it is reasonable to consider the following factors:

sufficient distance from walls, fences, trees, wires, thorny bushes and pointed objects;
illumination. It is desirable that the sun hit the site until the evening. So wooden material insured against dampness;
it is better to immediately pick up a smooth surface relief so that you do not have to carry out additional work;
the place should not be "blown through with all the winds." Drafts are fraught with quick colds.

It is good if there is sand or a soft lawn under the swing. This will help in the event of a fall not to get serious injury on a stone or rebar.

Drawing

You can do without it. But if a serious project is conceived with a claim to long-term service, then it is better to prepare a drawing of a swing for reasons of saving material. Designing a homemade swing is not difficult.

General provisions that reflect the drawings of a garden swing made of logs:

frame structure;
sizes. For a swing, this is the height and area of \u200b\u200bthe base;
places of fastenings and reinforcing elements should be marked;
number of seats and their type;
the length of the suspensions and their type.

An example of a drawing of a wooden swing

Material selection

It is important to focus on the quality of the material from which the swing will be made. High-quality wood will not only ensure the durability of the structure, but also guarantee the safety of use.

Species such as cedar, oak and larch will not deceive expectations. Spruce, pine and birch are also strong enough.

Lumber must be chosen dry, without traces of mold or foci of decay. There should be no falling knots, crevices, holes made by pests. A large volume is not required for a wooden swing, so you can check every board and beam.

Instruments

To make a wooden swing you will need:

A strong branch

mix for concrete mortar;
nails, self-tapping screws, bolts, corners (in accordance with the project);
tape measure and plumb;
hacksaw;
hammer;
antiseptic for processing wooden parts;
grinder (or drill with a nozzle);
screwdriver

This is the main arsenal. When everything is ready (material, drawings and tools), we begin to make garden swings from logs.

Caring for a wooden swing

Annual treatment with a special compound or painting will save the product from decay and pests.
From the end to the beginning of the season, it is necessary to cover the swing with waterproof material.
Avoid rust on metal parts.
Do not give disproportionate loads.

Such a swing will delight more than one generation, subject to these simple and understandable rules.

And if they fit better into the design of your garden, then it will be more difficult to make them. But they will last you longer.

Children can ride for hours on the outdoor swing. The child is attracted by the feeling of flying. IN apartment buildings swings are installed on playgrounds, and caring parents put them on private plots.

A simple design makes it possible to make a hanging swing with your own hands. Moreover, children can be involved in the process of designing, building or decorating.

Outdoor wooden swing - children's joy in flight

Making a swing out of wood is the most common practice. This is not surprising, because they differ in such advantages:

environmental friendliness;
availability of lumber;
relatively low cost;
ease of working with wood;
security. The wood material is soft, which reduces the risk of serious injury when falling.

Thanks to the properties of wood, children's wooden swings can be found in almost any private yard or country house. In terms of mobility, they are divided into stationary and portable. Swings made of wood, unlike metal ones, are more often made stationary, because. the tree does not have sufficient weight for stable standing (the frame of a wooden swing requires secure fastening).

Based on this feature, it is necessary to consider the installation site of the swing.

Where to put the swing?

When choosing a place you need to consider:

visibility. The child should be visible whenever possible;

remoteness. The economic zone and the pond located nearby are not a place for games. In the absence of other options for installation, it is necessary to enclose the areas with a fence. Also make sure that the swing is placed at a safe distance from fences, walls with windows, trees, etc. flight obstacles. It is also not worth installing a swing next to communications;

illumination and shading. The installation site should be bright, but create a shadow, especially in summer at noon;

humidity. A wooden outdoor swing will become unusable from excessive moisture, not to mention its harm to the child;

lack of drafts;

absence poisonous plants, allergens, honey plants, thorny bushes;

surface relief at the installation site. The installation site of the swing must be leveled. Then you don't have to change the length. support pillars, and nothing will prevent the child from enjoying his favorite fun;

the quality of fastening of each swing assembly.

How to make a wooden swing with your own hands - step-by-step instruction

To be sure of reliability, you need to build a swing yourself. A step-by-step guide for beginners will indicate the correct direction and construction plan.

Stage 1 - choosing the design of a children's swing made of wood

Children's wooden swings must be safe - this is an axiom! In many ways, their ability to stand stably is determined by the configuration of the support (frame). Before you start work, you need to decide which wooden swing frame will be optimal for installation. After all, its shape affects the safety of the structure and determines the place and method of its installation.

Types and types of frames for swings

U-shaped frame

It is considered the most economical model. Less lumber is used to make it. In addition, the supports do not interfere with the movement of the child, and cannot cause injury through negligence. However, for stability, the structure needs concreting of supports, therefore it is stationary. The frame is ideal for installation on soft ground and for making suspended sectional swings.

L-frame

It is sometimes referred to as an inverted "V" support. More stable than the previous version. This option allows not only to hang a swing, but also to create a children's corner.

X-frame

It is a kind of L-shaped, only the support beams are fastened not at their junction, but slightly lower, at a distance of 150-200 mm. At the intersection vertical bars jumper is installed. This is an easier way to make a support. It should be noted that such a frame needs additional reinforcement in the form of a side stop.

A-frame

The most reliable of all designs, due to the jumper, which strengthens it. It is this frame that should be preferred if it is planned to expand the swing by arranging stairs, installing a climbing rope and other elements of the playground.

Stage 2 - drawing a wooden swing for children

The presence of a drawing or sketch of a swing helps to determine the optimal dimensions of the structure, calculate the load, choose the right section of wood for manufacturing, determine the amount of material and the parameters of the workpieces.

Wooden swing drawings must contain:

frame configuration (shape);

wooden swing dimensions It should be noted that the dimensions of the swing are the height, as well as the perimeter of the base;

the presence and place of installation of additional reinforcing elements (kerchiefs, spacers);

the number and type of seating (taking into account the age of the child);

type and length of suspension (ropes, chains, cables, etc.);

You can make an additional drawing with a detailed breakdown and dimensions of the blanks.

The dimensions of a wooden swing are determined based on:

the age of the child - the length of the suspension, the size and configuration of the seat depend on it;

growth - determines the length of the suspension.

You can make a swing "for growth", then:

the optimal seat width is 600 mm.

seat height above the ground - 500 - 550 mm. This will allow, on the one hand, to swing and stop the swing on its own, and on the other hand, it will not interfere with skating;

height from seat to crossbar - 1600 mm. To make it convenient for the child to swing while standing;

the total height of the swing from the ground to the crossbar is determined taking into account the thickness of the seat.

Advice. The seat and suspension must support the weight of the child. For reasons of practicality, it is better to make a margin of safety up to 100-120 kg (several children or a child and an adult).

Stage 3 - material for a wooden swing

To make a wooden swing with your own hands, you need to choose the right wood. It is better to give preference to durable wood species - oak, larch, or cheaper ones from spruce, pine, birch. The main thing is that the lumber is dry, good quality free of loose knots, holes and other defects.

Depending on the type of frame, you need to prepare:

for a U-shaped frame - timber 80x80 or 100x50 - 2 pcs. For all other types of frame - 4 pcs.;

for the crossbar - a beam (log) of the same section - 1 pc.;

for sitting - boards 600x300x25 - 1 pc. For the manufacture of seats for children under 2 years old, additional elements are thought out - backrest, handles, fences;

for suspension - a welded chain with an anti-corrosion coating or a strong rope (the one used by climbers is suitable). The length of the suspension is equal to two swing heights. On average - 4,500 mm - 1 piece;

for fastening the frame - wood screws 80x4.5 - 40-50 pcs., as well as self-tapping screws 50x3.5 - 250 pcs.

for attaching the suspension - carabiner, hanging hooks, steel corners. Quantity - depending on the method of attachment;

for wood processing (protection) - primer;

for decor - paint or wood varnish.

for concreting racks - cement, gravel and sand (for mounting a U-shaped frame).

From the tool you will need: a screwdriver, a saw, a planer, a grinder, a level, a drill, a plumb line.

Stage 4 - making a homemade wooden swing for a summer residence

We move from theory to practical implementation of the project. Consider how to make a wooden hanging swing with your own hands.

Preparing a place for installing a swing

After choosing a place, you need to remove the remnants of construction debris, remove thorny bushes and level the site.

Note. Some users advise to concrete the platform for the swing, citing the fact that in the place where the children push off the ground, a hole appears in which water accumulates. Others believe that this is the lesser of the troubles. After all, falling on a concrete base is a serious risk.

Timber preparation

Outdoor hanging swings made of wood should be safe for children. Therefore, it is necessary to grind each workpiece in order to exclude the appearance of splinters. And also cover all wooden elements with a primer. Ready-made swings can be primed, but then there is a possibility of destruction of the wood at the junctions.

Installation of a frame for a children's swing made of wood

As discussed above, there are several ways to arrange a frame. Therefore, we consider the main nuances of mounting each of them:

U-shaped frame. The arrangement begins with the fact that the vertical racks and the upper jumper are fastened. Then you need to dig two recesses (the depth is 1/3 of the height of the support). Pour a gravel-sand cushion on the bottom, install a stand, concrete, wait until the concrete hardens, and install a suspension with a seat.

Note. The lower part of the supports must be treated with any means that will prevent wood decay. The most budgetary and reliable option would be to use used engine oil.

L and A-shaped swing frames are usually also assembled on the ground. Order of execution: cut four supports at an angle, for a more reliable connection. Then attach the top crossbar to the knot. In the case of the A-frame, a crossbar is added, which makes the structure more stable. Then the assembled frame is installed in the prepared place. For reliability, you can drop into the soil (previously treated with a primer against decay) or fix the lower part of the supports to the ground with a long rod and bracket.

X-shaped frame for a swing. It is done similarly to the previous one. Only the ends of the supports are not sawn, but fixed with each other. A jumper is placed in the formed upper corners.

Note. So that the installed X, L and A-shaped frames do not fall into the soil, users recommend concrete patches under the base. Thus, the probability of skew of the structure is eliminated and its mobility is preserved.

The weak point of X, L and A - shaped frames at the junction of vertical supports and lintels. To make this knot, long self-tapping screws are used, but, as the masters note, it is advisable to use a nozzle nozzle of suitable sizes. The photo shows this element and its installation location.

Advice. You need to fasten the screws in the manufacture of the frame in this way: first, drill a hole with a diameter slightly smaller than the diameter of the screw, and then assemble the workpieces onto the self-tapping screw. Some craftsmen advise gluing the joints of the workpieces for reliability, while others recommend strengthening the knot by using metal plates or wooden spacers.

Swing seating device

The method of manufacture and the material of the swing seat is determined by the age of the child. Children are not demanding on design, they are quite satisfied with a tire seat or a simple board. At the same time, you can count a dozen ways to make it.

Fastening the swing to the crossbar

Suspension (cable, rope or chain) is attached to the crossbar. Suspension is a swing knot for attaching the swing to the crossbar. The suspension has the maximum load, which means that special safety requirements are put forward for it.

Note. The seat is installed only on chains or cables, and not on wooden or metal hangers. Garden swings are designed for adults and do not need to be adjusted, and wooden country swings for children need to be adjusted as the child grows.

Mounting the swing and seat suspension can be done in several ways using different fasteners:

throw the rope over the crossbar and tie or fasten with a staple;

using metal plates that are attached to the crossbar in the upper part;

with a carabiner.

The material was prepared for the site www.site

By screwing the anchor into the crossbar and attaching the suspension to it.

By covering the beam.

Stage 5 - decorative design of the swing

Decorating a wooden swing performs a dual function. On the one hand, it protects wood from external factors. On the other hand, the original design of the swing forms a beautiful and bright element of the playground. The main rule is that paints and primers must be of high quality and safe so as not to harm the health of the child.

As an additional decor, you can install additional jumpers on the frame, which will strengthen it, and the children will have a ladder that will be of interest to those who are waiting in line to ride.

Caring for a wooden swing

Care is to check:

attachment points;
suspension;
seats;
paint quality.

to report a swing load greater than the one for which it is designed;

avoid shock loads (sharp sitting on the seat);

try to distribute the weight on the plane of the seat (do not roll);

ride perpendicular to the base. Suspended swings are designed to ride along supports;

maintain a moderate swing amplitude to avoid overturning a loose swing.

Conclusion

We check the reliability of the installation of the suspension and seat, and at the same time the strength of the entire structure. If nothing is deformed under the weight of an adult, then the child will survive. However, a wooden swing for a summer residence needs a periodic inspection of the main knots and attachment points.

A favorite detail is a garden swing made of wood. They are equally liked by adults and children. It's nice to stretch out on soft pillows in the shade of trees, relax, dream under the measured swaying. And for children, this is the main entertainment.

The classic design of a wooden garden swing using a chain

Manufacturers present a large selection of ready-made models from different materials. They differ:

Conditionally share a swing for adults and children. Large sofa-type models designed for several people are the most popular type. They additionally complete with an awning, soft pillows.
Suspended structures with a spring attract attention. The seat is made in the form of a basket-cocoon from a vine, rattan. They are hung from the thick branches of trees.

Design and construction of a wicker garden swing in the form of a cocoon

Cabinet sofas, attached on ropes to tree supports, beams, will add romantic appeal to a corner of the garden.

For entertainment, outdoor activities, Russian swings for several people are suitable. Practical and comfortable for relaxation, leisure designs with mosquito nets, marquee.

Children are smaller in size, according to the growth of the child. Additionally, they install safety elements, side supports.

Classic Russian swing assembled from logs using a chain

Main types:

balancers;
suspended;
pendulum;
carousel.

You can choose a model according to your wishes, idea of relaxation, landscape style.

How to make a wooden swing with your own hands

Swings are most often made from wood. It has many advantages:

Such a swing is easy to make, even with minimal carpentry skills. Remember that a tree needs protection from moisture, temperature changes, snow, sun, pests. Therefore, all structural elements are opened with moisture-resistant varnish.

Material selection and tools

They begin work by auditing the existing material, selecting wooden blanks. Choose a model, draw its sketch.
The second option is easier. It is necessary to select a product, study the drawing and calculations. Based on them, purchase necessary material for blanks.
Prepare the instrument. For work you will need:

Drawing with optimal dimensions swing for installation at their summer cottage

for measurements, marking - tape measure, construction pencil;
jigsaw, they cut out individual parts;
hacksaw, circular saw (cut the main elements);
building corner, level;
planer for woodworking;
clamps tighten individual elements;
screwdriver, hammer;
tighten the mount with wrenches;
electric drill, screwdriver.

Ready-made drawing of a country penitent sofa under an awning

Fasteners are also needed: self-tapping screws, screws, fasteners for rafters (connect complex nodes), eyebolts with washers. Clean, grind wooden surfaces with sandpaper, or with a nozzle on a drill. The swing is painted, opened with a protective varnish.

Scheme of a garden swing

Scheme of the arrangement of structural elements of the swing prepared for assembly

A popular model among summer residents, gardeners is a swing sofa. They are mounted on two types of racks, "A" and "P" shaped. The material for them is timber, logs.

With a sofa seat length of 2 m (per 200 kg), the recommended section of the racks is at least 100 x 100 mm, for portable ones - better than 100 x 150; 200 mm.
You must first select a location. A straight platform will ensure the stability of the structure. The optimal location is in the shade behind the house. Then a design diagram is drawn.

The location of the garden rocking chair in the shade of a tree will allow you to relax on a hot afternoon.

It includes:

The design option for a resting place in the form of a sofa is a great place to relax

Fasteners: self-tapping screws, screws, eye nuts with bolts (to secure the chain), metal corners, carabiner for attaching the swing. The sofa is hung on a chain.

Step-by-step instruction

A do-it-yourself swing made of timber is a simple and reliable country furniture

To make a garden swing with your own hands from wood, you need to follow the sequence and carpentry rules. One of them is the ratio of the width of the seat of the bench and the step of the uprights, it should be 50 cm wider. This proportion will provide stability.

Step-by-step instruction:

Rack manufacturing. Sawing blanks the right sizes. In the shape of the letter "A" connect the main standing supports. They must be rigidly connected, so it is better to use furniture bolts with washers.
The process of sawing a log into bars for the manufacture of pillars
Mark, fasten the side rails. If it is a stationary swing, then they must be buried in the ground to a depth of 50 to 70 cm. This must be taken into account when marking the main racks.
The process of deepening and installing frame pillars in dug holes
The underground part of the support must be treated with bitumen, oil so that they do not rot. The design will be more reliable if the racks are cemented. The ground part is divided into three proportional parts and jumpers are mounted (on 2 sides of the main rack, on long self-tapping screws).

Processing principle wooden poles bitumen or other materials
The next step is the installation of the main jumper. It is fastened with racks with metal corners.
The device for attaching the main beam to wooden supports
From the upper side jumper to the main one, jibs are mounted (on metal corners) for stability and structural strength.
The scheme of fastening the side struts to the main jumper
We make a seat. To do this, you need to make two frame structures with additional vertical jumpers. Sitting - 2 m long, 0.5 m wide; the back of the bench is 2 x 0.65 m. Planks are screwed to the frame at regular intervals, it is better to fix them with self-tapping screws. Connect both parts with metal corners. Then install the armrests of the bench.
Scheme with the dimensions of various components of the design of the swing seat
Suspension installation. 2 pairs of eyebolts are attached to the edges of the backrest frame, the other to the seats. Drilled in the main crossbar through hole, two bolts are passed into it. They put on a carabiner for attaching the swing. Then the chain links are inserted.
An example of mounting a wooden chair on special bolts
The final stage is the installation, the deepening of the entire structure into the ground. The pit is dug 20–30 cm deeper than the underground part of the side post. Each installation step is checked using a level.
An example of a rocking sofa installed in the garden with a canopy

The wooden structure will be preserved better if it is varnished and painted.

Making a children's swing

Suspended collapsible structures are the most popular type. They can be moved around the site by hanging on one of the branches of a tree. The child will always be in the field of view of the parents. Stationary hanging swings are installed on.

Placing a swing with a slide and a ladder on the playground

The sequence of installation of the structure does not differ from the usual scheme. Standard option- "P" shaped support with hanging seat. You need to take into account the age of the child. For small ones, safety jumpers are additionally installed. Children grow, so it is better to provide a mount that would allow you to adjust the height of the seat.

Safe rocking seat with jumper for small children

For this, swing carbines are suitable. The site should be flat, preferably with soft grass, sprinkled with sand. When falling, the child is less injured. Watch in the video the process of making a wooden garden swing.

Reading time ≈ 10 minutes

It's nice to sit on a bench after a long day at work. It is also much more pleasant to relax on a garden swing, which will give light swaying and soothing coolness. Buy, unfortunately, such a design is not always possible. After all, the cost of such a swing is high, often sky-high. Therefore, let's talk about how to build gardens in order to enjoy a pleasant outdoor recreation.

Beautiful garden swing in the country

Undeniable advantages of a garden swing. Varieties

At the cottage or in the yard country house garden swing is an indispensable attribute landscape design. In addition to a great place to relax, they perform many functions:

resting on them, you can easily gather your strength;
calm the nervous system;
beautiful decoration helps to transform the entire yard;
a comfortable place to work at a laptop or to read books;
you can nap on them during the day (especially for children);
suitable for a pleasant tea party and conversations with a glass of wine;
children are helped to train and develop the vestibular apparatus.

As you can see, the benefits are really huge. Therefore, it is logical that their popularity is so high among the population. The design, in fact, is not very complicated, so even a beginner in the construction business will be able to build such a swing at home.

Another advantage of own construction is the full compliance with your desires. You can decorate or decorate it yourself, choose a special shape and size. The main thing is to follow the instructions during construction, then everything will definitely work out.

Before you start making a garden swing, you need to consider what they are. For example, for the purpose:

for children;
for adults;
for the whole family.

Depending on the location there are:

stationary swing;
mobile swing. Convenient in that you do not need to become attached to certain place. You can easily and quickly move it to another area.

If we talk about the main materials used, then the swing is:

from wood;
from metal.

The design can also be very different.

Suspended.

This option is simple. All that is needed to create such a swing is a crossbar, a high strength rope and a seat (it is better to choose with a back).

Hanging garden swing

Frame.

Often used for children. They are strong and stable and easily moved. So at any time you can move the swing to the shade or another place you like.

Frame garden swing

Crafting on wood requires crafting a seat. Everything else is easy. After all, it is not necessary to make a frame in this case. After the construction of the structure, it must be fixed to a tree (make sure that the branch used is strong) or a beam. For fixing, a cross-twist rope with a diameter of at least 24 mm is suitable (especially for swings on which children will ride).

You can replace the rope with a chain suspension. So you make the whole structure much stronger. So that the chain links do not harm children (fingers can get into the links), you need to place it in a suitable size plastic pipe. Alternatively, you can take a chain canopy with a small caliber. It is worth noting that in order to install a frame garden swing, you should choose the right place on the site, avoiding trees and various kinds of fences.

Correct choice of support

A swing support is not just a structural element, but its main component. The safety of being on a swing and the permissible amount of swing will depend on its strength. Most often, the material that is used to make the support is wooden beams, metal pipes and corners. For a summer residence, a support in the shape of the letter A is often enough. For this, a frame is built from two supporting elements. Between themselves, they are connected by a transverse beam, which is installed horizontally. Its placement occurs at the level of one third of the column above ground level.

The crossbar itself, on which the seat is then hung, must be mounted to the uprights, which are vertical. Use screws for fastening.

Important: metal swings must be fixed in the soil. Because in the process of rocking the "leg" of the pipes loosens and twists out of the ground. To prevent this, support frames are created. Alternatively, concreting into a trench can be done.

But for a more durable fixing of the wooden structure, you need to bury the "legs" of the garden swing to a considerable depth (at least one meter). It can also be filled with concrete. But before concreting, it is necessary to carry out preparatory work. Bituminous mastic is applied to the support so that the “legs” are well saturated. This will protect the wood from decay processes. A brick is laid at the bottom of the pit.

Video: do-it-yourself garden swing made of metal

Do-it-yourself construction of a garden swing made of metal

Metal is a durable material and heavy enough to make the entire structure of the garden swing strong and stable. This choice is ideal for building a swing that teenagers and adults will ride on. Also, the metal base will be more wear-resistant to heavy loads.

Metal garden swing

Be sure to use the drawing so that the entire installation is done correctly. Therefore, further step-by-step instructions are presented so that you can build a garden swing with your own hands from metal (drawings and dimensions, photos will be indicated below) in your country house. Of course, the options are selected individually. And in the photo we show only one of the possible.

Drawing of a metal garden swing

The construction of this installation begins with the preparation of materials:

pipes cut in accordance with the required dimensions;
burrs and sharp protrusions should be removed with sandpaper.

Form a base. To do this, the supporting elements must be fastened at an angle of 45 degrees. Then install the crossbar. It should be strictly perpendicular to the uprights themselves. At this stage, you should use a welding machine to connect all the elements as firmly as possible.
It is necessary to make recesses to secure the support. Pour sand to the bottom, which must be well compacted. Then install the support and pour concrete over it. The entire structure is left for at least a week so that the solution dries well and sets.
As soon as the filling dries, you can proceed to fixing the seat. Before installing it, you need to weld special hooks using a welding machine. The seat itself is hung on ropes (high strength) or on metal beams.
The final step is to paint all the elements of the garden swing. This measure is necessary not only to make the design attractive appearance. By painting it, you will protect your creations from rust and corrosion. Also possible various decoration to your taste and imagination.

Finished metal garden swing

If you feel that this option is beyond your power, then you can stop at a simpler copy of it. In this case, you need to stock up on a regular metal profile (diameter 50 mm).

Drawing a simple model of a metal swing

On the drain (transversely), attach special metal brackets. To do this, use bearings and a welding machine.
Install the seat on suspensions and attach to the structure itself. Most often, metal rods or chains can be found as suspensions.

A simple version of a metal swing

The creation of exclusive models looks original and attracts the attention of others. It can be forged products or a swing made from channels, or rather from their scraps. The swing benches made by yourself look interesting.

Wrought iron garden swing

Wooden swing

They are especially popular. After all, the tree is always popular, as building material. Building a garden swing with your own hands from wood is as easy as from metal. Drawings and dimensions, photos from the Internet to help you. It is only necessary to use suitable projects, then you will get the perfect result, and the photo of the homework is proof of this.

DIY wooden garden swing

Such structures have their advantages:

naturalness and environmental friendliness;
presentable and original appearance;
strength (in case of impregnation with specialized solutions and substances).

Drawing of a garden swing made of wood

The most suitable tree species are birch, spruce or pine. For construction you will need:

wooden pole - 2 pcs.;
cross bar;
rope - about six meters;
hooks or suitable hangers;
elements for fastening the structure (the ideal option is to use bolts).

if you have wooden beam, then a great option would be to build a swing on four pillars. But this design requires some attention and effort.

Initially, you need to make a support. Two parts of the bars need to be assembled in the shape of the letter A, as shown in the photo.
After that, you need to fix the crossbar.
In order for the installation to be as strong and reliable as possible, you need to use short bars.
From the same bars you need or a seat. And don't forget the backrest for maximum comfort.

Beautiful garden swing

Construction of a children's garden swing

The process of building a swing for children is similar to the construction of an adult version. Need detailed diagram structures, drawing dimensions and locations of elements for fastening. When using blueprints for adults, be sure to optimize it for children.

Racks need to be made. They must be the same size.
The racks are installed at a distance that directly depends on the width of the future seat.
Connect both supports with a crossbar.
Particular attention should be paid to the reliability of connections. To do this, you need to measure as accurately as possible the angle at which the elements of the racks, which are located vertically, will be connected.
You also need to ensure that the crossbar itself is equally removed from ground level.
Before installation, you need to dig a trench. It creates a special pillow of gravel. That's where the supports are placed. After installation, everything is poured with concrete mortar.
There is a grinding of the entire structure, it is also necessary to round the corners. This is necessary in order to make the swing safe for children.

Children's swing

Your dacha will sparkle with new colors when such a swing made on its own appears in the yard. It is not only useful, but also incredibly beautiful.

Fixing system

There are various mounting systems for garden swings, namely:

carabiner - made from the following types: with a rectangular section (intended for beams) and with round section(for bars);
anchor - the type of fastening passes through;
staples and hooks - designed for children's models;
clamps - needed for fixing in case of hanging the swing on cables.

Therefore, carefully study the features of each system. After all right choice fasteners allows you to make the swing not only durable, but also reliable.

Rope swing

The most classic models are rope and log swings. This option is considered the easiest to manufacture. To implement such an idea, it will be enough for you to make four holes. Use a wide log as a base. A rope must be passed through the holes made.

Rope garden swing

Using the same ropes, you need to put on a board for the seat. But you need to be careful. This option is not entirely sustainable. To prevent the seat from flipping over, make four holes on the side and thread the ropes through them.

The ends of the rope must be tightened well and tied with strong knots. And the swing is ready to use.

Today, DIY garden swings make a chic and unforgettable impression. It just takes a little patience and attention. What will the swing be like? Frame made of metal or mobile made of wood? It's up to you, but the swing must be fun. And all the most interesting about the independent construction of a garden swing, see the video below.

Video: wooden swing