How to make a flowerbed from a tire. We make a flowerbed from old tires with our own hands. Step-by-step manufacturing instructions. Drawing a contour line and making cuts

Editor Ideas 9760

The creativity of folk craftsmen is amazingly diverse and in modern landscape compositions among cozy gazebos, artificial ponds and rock gardens you can suddenly see ideas on how to make a flowerbed from a tire in an original way. Various techniques and color schemes allow structures made from such ordinary material as used wheels to become bright decorative elements that can decorate the most sophisticated garden corner.

Making a flowerbed from tires with your own hands is popular and attractive, and an increasing number of estate owners are adopting simple work techniques.

Flowerpot made from a car tire

Most widespread in summer cottages received flowerpots made by converting car wheels. To do this you will need a sharp knife and pliers. The algorithm includes the following steps:

mark the upper part, while the cut line drawn may have different shapes(smooth, fringed, in the form of sharp or smooth teeth, patterned);
cut tires according to markings;
divide into two parts;
turn the bottom inside out.

The upper fragment becomes an original stand for the resulting flower vessel in the shape of a glass with patterned edges. It is permissible to install mini-flower beds on wheel rims, which remain after all operations. Color solution can be the most unusual, bright and attractive. Beginners need to remember that it is easier to cut wheels that do not have a steel inner core. Certain skills are also required in order to unscrew the cut fragment, which is laid in the deep part on the floor. After this, you should pinch the edge with your foot and pull it up strongly.

To cut a tire without any problems, it is advisable to use a knife with a narrow, sharp blade, which is treated with a soapy solution during operation.

A variety of materials are used to decorate the resulting flowerpot:

paints (water-based, enamel, oil);
decorative mesh;
stones, shells.

Usually, soil is filled into such improvised flowerpots and various plants are planted. But they can play the role of decorative flowerpots, for which the inner surface is also painted. After this, in the summer, you can place a pot with a home flower in such a creative tire creation.

Creative ideas for making a flowerbed from tires

Making an original flower garden for a person with unconventional thinking becomes creative process. It is advisable to place volumetric structures on open areas, flowerpots decorate the entrance to the house and are placed along walls and paths. Multi-tiered compositions will serve as an excellent camouflage for the fence, animal figures will nestle comfortably under the trees, and snow-white swans will decorate the shore of the reservoir. The second life of old automobile wheels is embodied in a wide variety of models.

A frog flowerbed for low-growing flowers is built surprisingly easily and quickly. Two car tires are laid side by side in a horizontal plane, a third one (the head) is placed on top exactly in the center, and two wheels of a smaller diameter are attached to it with self-tapping screws. vertical plane(eyes). The entire structure is painted green, and in the center of the “eyes” there is a white circle and a black pupil. The mouth is depicted in red, and the characteristic paws can be cut out using a rubber mat. All that remains is to fill the flowerpots with soil and sow your favorite plants.

The most pragmatic design is a tower, a structure that includes several tires placed on top of each other, decorated in one tone, or made in a multi-color palette with a variety of patterns.

Four tires of the same size can be transformed into a flower bed through simple transformations. To do this, three wheels are cut along the diameter to make six arcs, which are laid out in the form of petals to the round core. The color is chosen according to your preferences and the requirements of the surrounding landscape design.

An unusual composition using tires of different diameters can be placed on old wall or a large concrete fence. They are suspended vertically on cables, filling the lower part with soil for flowers with a shallow root system. By installing it on a tire of a smaller diameter, similar but larger, having previously cut off the top part and attaching a handle on the side, the role of which will be played by an old hose, to self-tapping screws, you can get a flower garden-cup, which before planting it is advisable to paint it in a bright background with floral decoration.

Unique, strict flowerpots created by installing wheels on small tables and placing inside compositions composed of low flowers, which can be of the same variety, but of different colors, will surprisingly fit even into the park landscape.

The variety of stylized images of birds and animals serving as flowerpots is striking; for this, according to a certain technique, you need to cut the workpiece using a jigsaw or knife and turn out the parts. For example, by making a perpendicular cut and stretching two stripes, the tail and head of the future parrot are formed, the wings of which are the remaining semicircles. There are proven techniques for making figures of a swan, bear, dragon, turtle and others from tires.

“What paint should I paint the tires for the flower bed?” - one of those questions that inevitably arise when creating a flower garden from tires. Decorating your own backyard or garden plot is one of the main tasks facing the owner of the house. At the same time, each of us selects the style and placement of various elements based on individual preferences and our own capabilities. Recently, due to the worsening economic situation in the country, decorating and creating elements with your own hands has become especially popular. One such solution is to create a flower garden from improvised materials. This process contains many nuances and even more questions that require answers.

Creating your own flower garden is quite a complex and time-consuming task. At the same time, it requires from us good knowledge of the matter and the manifestation of extraordinary talent, which is the basis of future construction. Any construction, be it a residential building or an ordinary flower bed, requires significant elaboration of all the details and the creation of a plan for future work. You can, of course, purchase a ready-made version of the flowerbed and not have to worry about creating it and decorative finishing. However, such a solution requires significant financial costs, and this may not always be advisable, especially in the conditions of modern reality. Based on this, the best option is to create a similar object with your own hands.

When making such a decision, the question inevitably arises of what material to choose for the work. The answer to this is quite simple, since absolutely any waste material available is quite capable of being succinctly integrated into such a building. Wooden beams, metal sheets, plastic bottles and even car tires - all these materials can harmoniously fit into the project of creating a flower garden and serve as its basis. At the same time special attention You should pay attention to the use of car tires, since they are the ideal material for creating an impromptu flower garden, allowing you not only to significantly save money, but also to achieve excellent visual characteristics of the object.

The process of creating a flower bed using a car tire is quite simple, but its decorative design requires a responsible approach. After all, the visual perception of the object depends to the greatest extent on the external characteristics of the flower garden and the plants inhabiting it. Giving the aesthetic appearance of a similar building can be done both by painting the materials underlying the flower bed, and by cutting out various figures and images from the surface of the products. Each of these options is sufficient good decision, and all of them can be used both in combination and separately. The resulting images will significantly diversify the garden, as well as give it individuality.

Progress of painting the flower garden

Choosing the main coloring agent is a fairly important task, giving you the opportunity to experiment with the shades of the object and select their optimal combinations. However, painting tires is not that difficult. To implement such a solution, it is enough to perform just a few simple steps that will make the finished building unique. In addition, carrying out similar work requires a minimum amount of materials:

solvent;
primer;
dye;
set of brushes.

This small set is sufficient; it allows you to completely paint all the necessary details of the future flower bed. At the same time, processing the material itself with paint requires adherence to a certain sequence, which makes it possible to obtain a high-quality surface characterized by a long service life and excellent appearance. The sequence of processing each tire separately is presented below:

1 First, the product must be completely free of dirt: its surface must be clean and free from the slightest particles of any contaminants.
2 The next step is degreasing the surface. To do this, use a solvent or any similar product (white spirit or acetone). This step allows for additional cleaning of the material and helps the paint adhere better to it.
3 The use of a primer is not mandatory. However, its application promotes better fixation. coloring matter on a rubber surface. The result of its use is that the painted product will retain its original appearance for a long time. appearance without deforming or cracking.
4 The direct process of applying paint to a tire is quite simple. However, to create designs you will need brushes of various sizes and shapes, but a monolithic coating can be created using only one brush in the shortest possible time.

As can be seen from the above sequence, painting a flower garden is not particularly difficult; with the right approach, all manipulations can be completed in just a few hours. It won't take much time to create a flower bed.

Material options and their properties

Schemes for creating flower beds can be varied. For example, one of the most common wheel placement options is a slide. It is this arrangement that makes it possible to obtain optimal external characteristics of the flower garden and make it incredibly practical. In addition, the slide involves the use of a wide range of colors, which makes this arrangement one of the brightest and most colorful among similar configurations.

The choice of paint to cover the surface is an important and responsible decision, since the visual characteristics of the finished object largely depend on it.

Today, there are several types of materials that can be used to paint a structure.

Among them are the following:

aerosol;
automobile;
nitro paints;
acrylic;
water-based;
oil

The above types of coating can be used to fully color a flower garden. Moreover, each of them has its own specific properties. Thus, aerosols have a high degree of penetration: they are able to penetrate even the most inaccessible places.

Automotive enamels and nitro paints allow you to achieve excellent external performance, but require special care for the treated surface. Water-based and oil-based coatings have the shortest service life compared to other options, but can also be used to paint tire beds.

Creating a flower bed with my own hands requires certain skills and creativity. One of the best options The material for the flower garden is car tires. This solution allows you to get a magnificent and colorful object, as well as save a lot. However, the use of such products involves the need for decorative processing. Not everyone can say with confidence: “I don’t paint car tires,” since the result of a similar decision will be dull images and faceless textures. It follows that it is still worth painting such material. After all, doing this is not so difficult, and the result of such work will delight everyone with its beauty and brightness for a long time.

Flowerbeds made from tires will come in handy if, when decorating your plot, a gardener wants to make beautiful flower beds, but at the same time not spend extra money on creating them.

The use of these materials allows you to create colorful flower beds sometimes very unusual shapes that will not leave anyone indifferent.

Such flower beds will last for many years and will delight you with their appearance.

In the photo below you see that even flower beds made of such unsightly material can look bright and colorful, you just need to put in a little effort.

Making flower beds from car tires is very simple; the whole process does not require any special knowledge, skills or tools.

All you need to make such flower beds is old wheels that will need to be cut, oil paint, a power saw or knife and imagination.

How to choose tires for flower beds?

At any tire shop there will always be a few old car tires ready for disposal.

If you can choose, then give preference to imported ones that are made of thin and soft material.

It will be easier to make flowerpots for a flower garden from a soft and pliable material. It is better to choose winter tires that are as worn as possible.

Tires with worn tread will be much easier and simpler to turn out.

Before making flower beds, clean the wheels from dirt, as a dirty tire will be difficult to cut.

It is best to cut tires with a jigsaw or grinder, but if you don’t have them, you can cut them with a sharply sharpened knife, which can be lubricated with soapy water while working.

The simplest flower beds made from tires

If you don’t have any time to make masterpieces from tires with your own hands, and you are satisfied with the simplest option, then in this case you can simply put the tire in place of the flower bed, pour drainage and soil into it, and then plant it with plants.

However, this option will only decorate your yard with plants.

To make the flower bed look attractive and decorate your site in itself, take several tires and paint them in bright, rich colors.

Another very simple version of a DIY flower bed can be made from tires of different sizes.

In this case, they are laid out in the form of a pyramid, and at the top you can place a very small wheel or a flowerpot with flowers.

By painting the wheels, you will get a wonderful flower garden in which you can grow not only climbing flowers, but also strawberries or strawberries.

In the photo you see what such flower beds look like.

It’s very easy to make a hanging flowerpot from a wheel with your own hands. To do this, it is not necessary to cut it, just attach a chain or rope to it and secure it to a tree or canopy.

To prevent the soil from spilling out, the bottom of the tire must be covered with a piece of plywood or rubber. Or you can insert an ordinary pot into the tire.

And if you attach 3 or 4 legs to the wheel, you will get a standing flower bed that can be placed in any corner of your site.

Flowerbed - flower

If you have a lot of space in your yard, you can make a flowerbed in the shape of a daisy.

To start making it, you will need 4 tires of the same size, three of which should be cut in half so that you get 6 semicircles.

You need to paint the halves and the whole tire in bright colorful colors. The whole tire will serve as the center of the flower; halves should be placed around it in the form of petals.

The tires should be dug into the ground about 5 - 6 cm. The composition will look very beautiful if you plant one type of flower in the middle and another in the petals, preferably in a contrasting color, for example, as in this photo.

Flowerbed - turtle

Such a beautiful flowerbed will be very useful if you have small children, and it is also an excellent option for a flowerbed in kindergarten. Making it yourself is not very difficult. You will need two tires.

You need to cut off the sides of one tire and leave only the tread, which should be cut into 4 parts.

4 holes are made in the whole tire, into which blanks are inserted and secured with wire.

The turtle's tail is made from scrap rubber and attached in the same way as the paws. The head is modeled from a pipe and crumpled newspapers and secured opposite the tail.

This entire structure is painted in a suitable color. Additionally, you can decorate the turtle with a hat or other elements.

Flowerbed - frog

The flowerbed - a frog will appeal to both children and adults; no one will be able to pass by it. A flowerbed - a frog - is very easy to make with your own hands. You will need 3 tires.

Two should be placed on the ground very close to each other, and the third should be placed on top in the middle. Next you should make the paws. For this you will need scraps of tires and pieces of an old hose.

Cut the rubber feet and attach them to the hose with wire.

The eyes can be made from plastic bucket lids, and the crown can be made from a plastic bottle.

The entire structure should be painted with green oil paint. The flowerbed - the frog is ready, you can plant the plants and admire this beauty.

Flowerbed - cup

If you have two tires of different sizes, then you can make a flowerbed - a cup. To do this, place a small tire first, and a larger tire on top of it.

The edge of the top tire must be trimmed so that it does not interfere with plant growth. You can use the scraps to make a handle for a cup.

If you have a sidewall scrap from a large tire, use it as a “saucer” - place it under the cup.

Using the same principle, you can make a teapot, except for the handle from scraps. bent pipe Attach the spout to the teapot.

Paint your tea set in appropriate colors, for example, as in the photo.

Flowerbed - flowerpot

For those who are not afraid to do difficult work, there are more complex options. For example, from old tires that need to be cut, you can make it yourself beautiful flower bed- flowerpot. To do this, you can use a tire with or without a disk.

If you take a tire with a disk, you will get a flowerpot on a leg. Depending on what pattern you apply to the tire, this is the edge of your flowerpot.

These can be round petals, sharp petals, fringe or a smooth edge.

Lay the wheel on its side and mark the outline of the cut that you have chosen for your flowerpot and along which you will need to cut the petals.

Please note that each petal should be no more than 12 cm, otherwise the flowerpot will not turn inside out correctly.

Use a jigsaw or knife to cut out the outline and turn the wheel inside out. Turning the wheel is the most difficult stage of work for most gardeners, especially women.

To turn a wheel, turn it over with the cut side down, step on the middle, and grab the cut with your hands and pull the edges towards you.

After turning it inside out, you will have a finished flowerpot that can be painted oil paints in one or more colors.

You need to paint the flowerpot not only outside, but also inside, otherwise, even if you plant it with plants, black rubber will be visible from under them.

On top of a single-color layer of paint you can apply various designs and ornaments, as well as glue pebbles, shells, pieces of glass and other decor.

The photo below shows step-by-step instructions for making a flowerbed - a flowerpot from old tires.

Do not forget that a layer of drainage should be laid at the bottom of the flowerpot so that the soil in the flowerpot does not deteriorate; after drainage, the soil is placed in the flowerpot and the plants are planted.

If you have three tires of different sizes, then you can make a flowerbed out of them - a pyramid, but in this case you need not just put the tires on top of one another, but first make flowerpots out of them according to the principle described above.

As a base, you can take logs of different diameters and place the flowerpots on top of each other, alternating with the logs.

As a result, you will get an unusually beautiful flower bed, which will not only please the eye, but also save space in your garden.

Flowerbeds in the form of birds

It's pretty difficult option DIY flower garden, which also involves turning the tire out.

Such crafts can serve as yard decor or flower pots, depending on your desire.
To begin with, markings are applied to the tire, which will therefore need to be cut, as can be seen in the photo.

After this, use a jigsaw or knife to cut out the head and wings of the bird and turn out the wheel.

To make the swan's neck beautifully curved, a piece of reinforcement or rigid wire is attached to it with a thin wire, bent to the shape of the swan's neck.

You can also use other materials that you have on hand. Next, the swan is painted white and the beak is painted red, as seen in the photo.

From old tires you can also make other unusual birds for the garden with your own hands - parrots and toucans.

To do this, the rubber needs to be cut as shown in the photo, turned inside out and a beak made of plywood or a piece of rubber is attached to the bird’s head.

After this, the bird is painted in bright colors and hung.

Tire fencing

If you are planning to make a large flower garden on your site with your own hands, then you can install a tire fence for it.

To do this, dig a trench around the perimeter of the entire flower bed, half the height of the tire.

Place the tires close to each other and bury them.

Paint the fence in suitable colors.

Such a fence will last for many years.

Flowerbed of tires lined with stones

In this case, the tires are used simply as the basis of the flower bed. To create such flower beds, you should select tires of different diameters, as well as beautiful stones for cladding.

Stones of different sizes and shapes will look beautiful in the finished product. Flower beds made of stones can be two-tiered, have different shapes and decor.

Dig a hole in the ground according to the shape of the future flower bed, fill it with sand and lay out the first row of stones.

Try to lay the stone so that the cement does not peek out, but only secures the stones to the base.

Probably every owner of a dacha or country house at some point there is a desire to improve your site and make it unique.

But a logical question arises: how? After all, goods are sold to everyone, so where can one achieve self-expression? The solution is simple - do it yourself.

The role of flower beds in landscape design

One way to add personality to a site is to install flower beds. Flowers enhance the landscape. And the more original it is, the more attention it attracts.

One of the ideas for creating a flower garden at the dacha is do-it-yourself flower beds made from tires.

Rubber is flexible enough to be molded into different shapes.

It can be painted or decorated with other materials, creating a real masterpiece. The flowerbeds themselves are made from tires - original idea, and if you use your imagination, you won’t be able to take your eyes off your site.

Tires are often thrown into landfills, causing unnecessary pollution. environment. Be original, find a more worthy use for them.

You don't even have to buy tires: ask your neighbors, look at home. Someone just has to have a couple of them lying around.

In addition to the fact that DIY tire flowerbeds can be decorative element, you can plant small seedlings in them: strawberries, for example.

Advantages and disadvantages of using tires

The most important advantage of this element of country decor is, of course, originality.

But he's not the only one. Tire flower beds:

easy to manufacture;
can be painted in bright and rich colors;
will take the form you want;
free if you have used tires;
attractive.

Among the disadvantages of such flower beds, one can highlight only the fact that not everyone likes them. Some people want something simple and more elegant, while others don’t want to spend time making them.

The original instructions with photos and video materials in the article will help give the flowerbed a complete look.

IN landscape design mountain pine occupies a special place. What varieties of shrubs are used in our latitudes and what does this plant need?

Types of flower beds made from tires

Depending on your desire, you can create different types flower beds

Simple and angry

The simplest, but nevertheless attractive option is a flower bed made of tires in its original form.

Just throw soil inside and plant flowers. You can paint the tire to make it more attractive to look at.

Install several of these flower beds in the order you like on the same level, or build a multi-level structure out of them - and your lawn will become much more attractive.

If you like the idea of a multi-level flower bed, take tires of different diameters and place them on top of each other, covering each one with soil.

You will get an original pyramid, on the tiers of which you can plant various flowers, decorate it with pebbles and other details. It looks beautiful, doesn’t take much time – what more could you ask for?

Hanging flower beds

Hanging tire flower beds can be made using a rope or chain attached to a tree. For such a flower bed, you will have to cover the bottom of the tire with a flower pot or other suitable material.

The forms can be very different. For example, using two tires and a piece of pipe you can make a flowerbed-cup, flowerbed-bag, etc. Children will love the lawn, just like in their favorite fairy tales.

Let your imagination run wild

If you want to distinguish yourself even more, tire cutting is just for you. Flowers, swans, dragons and other representatives of flora and fauna.

You will need a shoe knife, a tire and a little imagination.

What do beginners need to know?

You don't need to be a cutting expert to create an amazing and colorful flower bed from wheel tires with your own hands. To do this, you just need to know a few details.

Flowerbeds can be:

low;
tall;
round;
curly;
single-tier;
multi-tiered.

The materials for making a flower bed are:

tires;
sharp knife;
paints;
stones, small and large;
metal mesh;
leftover building materials;
decorative stones and figurines.

First you need to know that the larger the site, the more massive the structure should be. Multi-tiered flower beds or large number small flower beds.

The simplest of the carved flower beds is the shape of a flower. It is easier to cut on soft rubber, especially on imported winter tires. It is thinner, therefore, it is also easier to turn it inside out. Believe me, this is very important.

Before starting work, the tire must be cleaned of dirt and dust, washed and dried thoroughly.

In order not to get lost in the shape of the petals, simply draw them and cut along the contour.

By the way, When painting, touch the inside so as not to disturb the aesthetics. Think in advance about how the color of the flowerbed will match the plants inside it. The more complex the form and brighter color flower beds, the more modest and lower the flowers should be, and vice versa.

Manufacturing step by step

So, how to make a flowerbed from a tire with your own hands:

First you need to choose a tire. It should be made of soft rubber. Be sure to check the availability of the disk so that you can create a full-fledged flower bed. Tires without rims are also suitable: for example, if you want a tall flower bed of several tires, a regular “cylinder”.
Think of the future shape and draw a cut line with chalk. Flower petals, simple circles and jagged edges. You can even cut the tire straight. The main thing is to come up with something that you like.
Cut strictly along the marked line. Do not remove the disc. Once everything is ready, set the top aside, turn the tire over, step on it and pull it up, turning the edges out from under your feet. The most difficult thing is to cope with the first piece, then it will be easier. This is a rather labor-intensive process that requires brute force and patience. It will not be easy for girls to cope with this.
Turn the tire over and bury it in the ground. You will get a beautiful glass. Upper part You can cut it inside and attach it to the main structure, or you can just throw it away. The advice to bury the tire is not in vain: if there are children in the house, they can destroy your many hours of work while playing.
Decoration. This is where your imagination can run wild. Paint one color or draw whatever your heart desires. Fence paint is perfect for this purpose. You can attach pebbles, glass or other decorative elements on top of the paint. You can lay out patterns, or you can completely cover the surface of the tire with improvised elements.
For greater effect, if you have flowers growing in your flower garden small plants, decorate visible areas of the earth with pebbles, figurines of gnomes, castles. You can create a fabulous composition from anything that comes to hand.

The video shows how to make a simple flower bed from tires.

You can see what finished flower beds made with your own hands from wheel tires look like in the photo gallery.

As you can see, there is nothing complicated in creating flower beds from tires. This can be a fun activity for you and your children, a way to express yourself and develop imagination.

And if someone has artistic talent at home, this is the best place to use it.

The most time-consuming part of the process is being able to turn the tire out. But if you don’t want to suffer, you can do something simpler. By the way, flower beds are not the only thing for which old car wheels are useful in the country.

Be creative, have fun decorating your yard and surprise your neighbors!

A person’s desire to decorate the territory of his dacha, to create a wonderful, cozy environment there using things at hand, contributed to the emergence of many design ideas.

The original material for implementing extraordinary ideas is old car tires.

Entertaining crafts made from tires for the garden will decorate both flower beds and playgrounds, as well as paths. Tires and tires can be used not only to create elements of garden decor, but also for practical purposes - they can be used to build a swimming pool, furniture, swings, sandbox, and bicycle parking.

The photos below show extraordinary ideas crafts made from tires.

Idea No. 1. Making a flower bed from tires

The easiest way is to take an unnecessary tire, fill it with soil and plant plants. Of course, this will not be a unique decorative element of garden design.

To fix everything, take bright paints (acrylic or oil-based) and paint the tires. Next, we place them on top of each other, resulting in a multi-tiered flower bed.

An original solution would be a vertically located flower bed, folded in the shape of a pyramid. We fill the soil inside and plant climbing flowers - petunias or strawberries. On top you can place a pot with a single plant.

Tires can be used to make hanging flower bed. To do this, you will need a steel chain - it will need to be attached to a tire and the entire structure will need to be suspended from a tree.

To prevent the soil from spilling, cover the bottom of the tire with a thick sheet of rubber or other suitable material.

An unusual solution would be to make flower beds in the form of a teapot and cups. All you need is a few tires and some scrap metal tape and pipes.

Idea No. 2. Tire figures

Another type of crafts made from tires for the garden are a variety of unusual and intricate figures made from tires. They will enliven your garden and improve the mood of everyone in the household.

The figure of a swan is very popular. To make it you will need a tire without metal cord. It must be pre-marked.

For cutting, use a well-sharpened knife. Secure the swan neck with a metal rod. The final step is to coat the resulting product with white or black paint (depending on what kind of swan you want - white or black).

It’s enough to simply create a funny horse, zebra or giraffe. Such figures will require installation in the ground wooden beam medium size including tire.

Crafts should be painted in colors corresponding to a particular representative of the fauna.

It's easy to turn old tires and cans into a frog or a cute turtle. A little imagination will help you make interesting and unusual installations.

Pay attention!

Idea No. 3. Country furniture

Furniture made from tires will look great in the garden.

They can be made in a variety of styles and using different upholstery materials, ranging from leather and textiles to wicker and wire.

The tires will make a comfortable chair in which it will be wonderful to relax in the lap of nature. To do this, we take tires and wrap them with intertwined straps and ribbons. It won't take much time, and the result will be entertaining.

You can make garden furniture from different-sized tires of medium and low hardness.

Tires make beautiful tables, ottomans, armchairs, chandeliers, fountains and washbasins.

Pay attention!

Idea No. 4. Tire swing

Swings are an integral part of any playground. Tire swings are safer than those made of wood or metal. They are quite simple to make.

You will need:

strong horizontal branch;
sharp knife and jigsaw;
chain or strong rope;
tire.

We tie the end of the rope into a loop; the knots must be strong and reliable. We throw the loop over the branch, pass the rest of the rope through it and tighten it. We place the tires perpendicular to the ground.

We pass a rope through them and fasten it at a height of approximately 0.9 m from the earth's surface. The swing is ready!

Idea No. 5. Tire track

Paths created from waste tires, or rather from their tread part, look unusual and original.

We bring to your attention a selection of photos of various crafts made from tires.

Pay attention!

Tires are universal material to create a wide variety of things with your own hands.

Numerous master classes on crafts made from tires can be easily found on the Internet. Therefore, if you have unnecessary old tires lying around, feel free to put them to work, creating memorable elements of garden decor.