Is it possible to glue wallpaper on paint (45 photos). Determining the type of paint. Features of gluing on oil, acrylic coatings. Pasting concrete walls. how to wallpaper paint how to wallpaper paint in the kitchen

Wallpaper remains one of the most popular finishing materials. To ensure good adhesive properties of the surface, it must be prepared before gluing the rolls. However, often the walls are covered with a layer of old paint, which is not always easy to remove. We will talk about how to glue wallpaper on paint in this article.

Coating type

In order to stick wallpaper with high quality, it is important at the very beginning to decide on the type of paintwork.

There are two most common types of paint:

Oil. It has a strong smell, has a good water-repellent effect. After setting, a protective layer is formed on the surface, protecting the surface from the negative effects of the external environment.
Acrylic (water-based). Acrylic paints and varnishes are odorless, water-repellent, good adhesion. After application, acrylic penetrates deeply into the surface structure.

To answer the question of whether it is possible to glue wallpaper on paint, you need to have an idea of the hardness of the coating. All paint that is easy to remove must be removed, otherwise there is a risk that the painted layer will later fall off along with the wallpaper.

To check the strength of the paint, it is enough to dig into the old paintwork with a spatula. Oil paint peels off in whole layers, but acrylic paint is much stronger and is removed in small pieces.

Work instructions

Sometimes there are difficulties with determining the type of paint and varnish material, but at the same time there is a need for gluing wallpaper on paint without priming the surface.

To perform the work, you will need the following materials and tools:

wallpaper rolls;
adhesive composition;
foam roller;
capacity;
hot water;
primer;
Scotch;
putty knife;
putty;
sandpaper.

Preparatory work

The highest quality result can be achieved only when applying the primer on paintwork. After treating the surface with a primer, apply a layer of putty to level out all the irregularities.

Over the years, the old coating has absorbed all sorts of unpleasant odors. This is especially true in the kitchen and rooms in which there is a lot of smoking. Walls in damp rooms are often affected by fungus or mold. It is not recommended to glue rolls on such surfaces without preparation.

First of all, we treat the surface with a special agent (for example, an antiseptic composition). Before sticking wallpaper on the paint, you can do the following:

We cover the wall with a roll of thermal insulation.
Glue the plastic mesh on top.
We apply a layer of plaster.
We install and fix a sheet of drywall.

Wallpapering

Regardless of the type of coating, when wallpapering, it is recommended to adhere to a number of general principles:

If there is a drawing on the sheets, then when gluing different rolls, the fragments of the images should fit exactly.
We purchase wallpapers with a small margin (usually 1 roll is enough).
For some types of wallpaper, not every glue is suitable. Before applying the adhesive, carefully read the instructions from the manufacturer and follow its recommendations when performing work.
The work will go easier and faster if there is an assistant.
We cut off a strip from the roll and put it on the floor downwards with a pattern. Next, evenly apply a layer of adhesive on the wallpaper.

We lift the strip treated with glue around the corners and stick it on the wall. We glue wallpaper from the window and from above. Carefully press the sheet to the surface. At the same time, we distribute the gluing efforts from the middle of the sheet - to the edges and down. Using a cloth or roller, remove excess glue from the surface.
The switches and sockets found on the wall are initially glued, and then we release them with the help of neat slots.

Features of acrylic surfaces

Before sticking the wallpaper on the paint, we prepare the surface. To do this, apply a mixture of primer and thinner to the wall with the old paint layer. Such a composition will allow changing the structure of the painted surface, forming small defects on it. Such depressions will improve the adhesive properties of the coating, so that the wallpaper will adhere better to the wall.

When the wall dries, once again we process the surface, but this time only with a primer. A layer of highly diluted adhesive can be applied. We start gluing the rolls only after the final drying of the surface.

Check out more detailed instruction for gluing wallpaper on water-based paint.

Oil paint sticker

Despite the fact that, as mentioned above, oil paint can chip off in layers, this is a very tenacious material. In addition, oil coatings are very smooth, which seriously impairs their adhesive qualities and complicates the gluing of rolls.

We glue wallpaper on oil paint only after preparatory measures. There are two ways of gluing wallpaper on coatings treated with oil paint:

First, we process the surface with coarse-grained sandpaper, and then we apply a primer and PVA glue on the sanded coating in a ratio of 1: 1.
Using a spatula, we make furrows in the paint layer: 5 cm channel every 20 cm of the surface. In the resulting grooves, lay the putty flush with the painted coating. Thus, we obtain areas with good adhesion, which will facilitate high-quality gluing of wallpaper. It is believed that sticking wallpaper on oil paint in this way is less effective than on a sanded coating. However, this method is applicable if for some reason it is difficult to clean the entire surface with emery.

Note! In the case of oil paints, it is recommended to use twice as much wallpaper paste as compared to PVA glue.

So, wallpaper can be glued on a layer of old paint. However, it is impossible to do without preparatory measures, because otherwise it will not be possible to glue the wallpaper to the wall with high quality.

kraska.guru

Determine the type of old finish

Finding out what paint was used to decorate the wall is easy. So, even if you don’t know what the previous owners or builders covered the surface with, it’s not scary.

If you run your hand over the surface, and a white mark remains on it, then you have a chalk whitewash.
Acrylic (water-based) paint is visually similar to lime whitewash. To understand what is in front of you, conduct a test: moisten a small area with water. At the same time, lime whitewash will darken, but water-based emulsion will not.
Water emulsion, like whitewash, can be washed out with water.
A durable smooth coating, shiny or glossy, is enamel (PF or NC).

Oil paint, like enamel, also forms a durable, smooth layer. It is extremely difficult to distinguish them. If the repair was carried out not very long ago, then the oil paint can retain a smell: if you chip a piece with a spatula and grind it, you can hear a faint smell of drying oil. If we talk about gluing on a painted surface, then this difference is not significant, since the technology of work will be the same.

Latex paint is also hard to spot. It has a slightly different structure than the usual water emulsion, although it is a variation of it. But there is a way here - if you walk along the surface with sandpaper, then the oil paint and enamel will crumble in small flakes. The latex coating, like a simple water-based emulsion, will be smeared on sandpaper. Thus, if the coating is not washed off with water, but remains on the sandpaper, it is latex paint.

Is it always possible to glue wallpaper on the old coating?

In some cases, it is necessary to remove the old paint, since the wallpaper will either not stick or subsequently move away from the wall. There are four options when a full cleanup is needed:

chalk or lime whitewash was used for decoration;
the paint was applied a long time ago, it has lost its structure and peels off;
plaster or putty in many places moves away from the wall;
if the wallpaper is light and loose, and the old finish is darker.

In the first case, if the chalk or lime holds well, has a uniform structure and a small layer, then you can take a chance and glue thin paper wallpaper. To do this, you must first apply a deep penetration primer to the wall, and after drying, glue the canvases. However, the reliability of such a coating will be doubtful, so it is still better to remove the whitewash.

Chalk or lime can be removed with a special solution, it is commercially available in concentrated form. Diluted before use hot water and applied to the surface. After that, when the layer of whitewash swells, it can be easily removed with a spatula and washed off with plain water. Oil and enamel paint is removed using special solvents and a building hair dryer. If the plaster has come off, removing only the decorative coating is indispensable. In this case, you will have to remove the entire plaster layer and prepare the wall from scratch.

How to glue wallpaper on water-based paint?

It is not difficult to prepare a wall painted with a water-based emulsion. Before sticking wallpaper on painted walls, you need to do the following:

clean and putty problem areas;
degrease the surface with any household detergent;
apply an acrylic primer and wait for it to dry;
use an adhesive solution that is suitable for the selected wallpaper.

For gluing on a water-based emulsion, paper or non-woven wallpaper is best suited. When they dry, more moisture is released into the air than into the wall. But canvases with a dense top, on the contrary, give more moisture to the wall, which can lead to the destruction of the paint layer, and the glued wallpaper will come off.

Wall preparation with latex paint

Wallpaper can be glued on latex paint if the walls are degreased and primed first. For degreasing, any detergent faerie type. But the primer must be chosen carefully. An acrylic-based concrete-contact adhesive primer is well suited. You need to wait for the primer to dry completely and then start pasting.

How to glue wallpaper on oil paint and enamel?

The success of wallpapering enamel and oil paint depends on the adhesive, primer and surface preparation. If you choose the right glue and primer, and the enamel layer has not lost its structure, the wallpaper canvases will hold securely. To determine the condition of the old coating, you need to conduct a small experiment - attach a strip of ordinary adhesive tape. After removal, this strip should remain clean. If there are pieces of enamel left on it, you will have to completely clean the surface. If the paint is holding well, you need to do the following:

sand the entire surface to make it rough;
putty problem areas(cracks, depressions, potholes);
clean from dust;
treat with a mixture of deep penetration primer and solvent (ratio 1: 1);
add to the PVA wallpaper glue (ratio 1:4). If you use glue for vinyl wallpaper, then you do not need to add PVA.

Instead of a ready-made primer, you can use a self-prepared mixture. To do this, the alabaster is mixed with water to the state of thick kefir, and PVA is added to this mixture, about 1/3 of the resulting volume.

If you want to do good repair, which is designed for decades, it is better to prepare the wall "according to all the rules of art." That is, remove the old paint and be sure that it will not cause unwanted surprises. If you prefer to frequently update the interior in your home, then, following the above recommendations, you can stick wallpaper on the old decorative coating.

gidoboev.ru

The decision to renovate does not come immediately.
nako and then we try this process delay until the last moment, when the finish of all surfaces slowly begins to fade, and in some places even fall off. Therefore, in order to refresh your apartment or house, it is often enough to carry out repairs "quickly". And here a serious question arises, how to decorate the rooms in your house. Wallpaper is becoming more and more popular at the moment as an inexpensive and most effective method ceiling and wall finishes. But what to do if the old paint, applied a long time ago, remains on the walls, and how to glue the wallpaper on the paint. This is possible subject to certain prerequisites.

Determine the type of paint
Before painting
Wallpaper pasting: general recommendations
pasting concrete walls

Determine the type of paint

To qualitatively paste over the wallpaper, you need, first of all, to determine the type of paint that the walls were painted with. There are several types of paints. Acrylic water-based paint does not have a specific smell, has water-repellent properties, fits well on the walls and is absorbed into them, fixing firmly in the structure.

Oil paint has a certain smell, perfectly repels moisture and forms a “protective layer” on the surface after drying. To understand whether it is possible to stick wallpaper on the paint and how to do it correctly, try to remove some of the paint from the wall with a spatula: the oil paint will fall off in pieces, while the acrylic paint, on the contrary, holds firmly and is removed only in small parts.

Before painting

The old paint on the walls gives the owners a lot of not too pleasant moments, such as bald spots and cracks that appear when the paint material is partially peeled off along with the plaster, and all kinds of bumps from the sagging that remain from the old messy brush strokes, or just the color of the oil paint, which pretty tired. And if the walls of the kitchen are painted with paint, then the old rancid smell that has eaten into them should be added to these troubles.

It is impossible to glue wallpaper on moldy or damp walls. It is absolutely not enough to treat these areas with an antifungal drug and simply dry them. It is recommended to eliminate the cause that provokes mold and dampness. The simplest means is to fix the segment on the wall roll heat insulator, and then sticking a plastic mesh on it, plastering with a layer of dry mix, or simply covering it with a sheet of drywall.

When choosing wallpaper, it should be noted that if there is a pattern or pattern on them, then the owners will have to join it in such a way as not to violate the integrity of the pattern. Always buy more per roll. Before sticking the wallpaper on the paint, it is recommended to carefully read the instructions for the manufacture of glue and strictly follow the instructions. Do not use glue that is not intended for the selected type of wallpaper, for example, bone.

It is customary to glue wallpaper, starting from the window. It is better to do this work together: in this case, one person will glue upper part, and the second - the bottom. Having cut off a strip of the desired length from the roll, you need to lay it upside down on the floor. With a brush, you should carry the glue, distributing it evenly over the entire surface of the wallpaper, and then lift it from the floor, folding the ends of the strip together.

Paste wallpaper on paint, drywall or old wallpaper from the top. The strip should be aligned with the ceiling and attached tightly to the wall. With movements that resemble the shape of a Christmas tree, you should press the wallpaper tightly against the wall from the middle of the strip - to the edges and down. This is best done with a rag or roller. With a rag, you can also remove excess glue that has come out around the edges.

The next strip must be glued in the same way, but taking into account the image of the wallpaper. The strips should be applied end-to-end to each other, but not overlapping. With a rag, you need to go through the joints again to fix them well. Switches and sockets must be glued with wallpaper, and immediately cut with a construction knife or blade crosswise with two lines. Then the excess part should be carefully cut around the perimeter of the switch or outlet.

Under the window openings and above the door, the wallpaper is glued after gluing all the solid strips. Is it necessary to glue wallpaper on the walls where it will stand furniture set? You should act at your own discretion. If the plans include a rearrangement of furniture in the future, then, of course, the wallpaper should be glued. It is strictly forbidden to use hot glue, because its consistency becomes liquid, which is the reason that the adhesive composition begins to protrude beyond the edges of the canvas, staining the front side of the wallpaper.

We glue wallpaper on water-based paint

To glue wallpaper on a water-based emulsion, you must first prepare the walls, otherwise the canvas can quickly fall behind the surface. First of all, you need to neutralize the old layer of paint substance. To do this, it is customary to prepare a mixture of primer and solvent in a ratio of 1: 1 and this composition apply to the treated surface. The solvent included in the mixture partially corrodes the old coating, allowing the primer to penetrate the wall structure and provide a reliable connection to the new finish.

After that, the wall should dry, and only then a layer of clean primer can be applied on top. This method allows you to get a rough surface as a result, which is necessary for good adhesion of the wallpaper to the surface. After drying, the wallpaper is directly pasted onto the paint. For these purposes, it is necessary to prepare a special composition, which consists of equal parts of wallpaper glue and PVA. It should be applied to the wallpaper and to the primed wall.

Wallpaper sticker on oil paint

Oil paint is a very clingy substance that can keep up with walls for years. But in this case, the whole difficulty lies in the fact that the layers of paint have a very smooth surface, which makes it difficult to achieve good adhesion of the wallpaper to the wall. Based on this, when planning to stick wallpaper on oil paint, you also need to make preparatory work. There are two methods for preparing walls covered with oil paint.

The first of them is as follows. To obtain a surface suitable for pasting, the walls should be treated with large emery, applied to the sanded surface with a mixture of primer and PVA glue in a ratio of 1 to 1.

The second method lies in this. With the help of a spatula, every twenty centimeters, it is customary to remove a layer of paint in horizontal stripes, which has a width of 5 centimeters, and then apply putty to the treated areas to align them with the rest of the surface. These strips are designed to ensure good adhesion of the panel to the walls. A similar method of gluing wallpaper on oil paint is considered less effective, but it also has the right to exist.

It’s not worth repeating how to stick wallpaper on paint - the sequence of actions is similar. The only difference is the composition of the adhesive solution - when wallpapering on oil paints, wallpaper glue should be taken 2 times more than PVA glue. By following these steps, you will get a good result. The wallpaper will hold tight, delighting the owners with their appearance.

Wallpaper sticker on whitewash and enamel

You already understood that water-based paint can be washed with warm water with a rag. But there are other finishing materials. For example, the situation is more complicated with whitewashing, because this material is not able to withstand any load. If you plan to wallpaper whitewashed walls, remember that the whitewash will have to be removed completely. To do this, soak it a little with soapy water, and then remove it with a spatula. Rinse off the residue with warm water using a sponge. You can not leave the slightest area that is treated with whitewash.

It is very easy to check otherwise. It is enough to run your palm along the wall with your palm and analyze the result. If at least a little chalk remains on your hand, you will have to wash the wall again and remove the last traces of whitewash. Without doing this, you can not take on wallpapering - all efforts will be in vain. Eventually, the wallpaper will peel off where the paint is left, and bubbles will form if moisture builds up there.

The second option for preparing whitewashed walls for wallpapering is to treat the surface twice with a primer, which is characterized by deep penetration, and dry each layer well. After that, prepare the glue diluted with water. The water content must be 20%. It is customary to process the walls with this composition, then it is necessary to wait for the substance to dry completely and you can glue the wallpaper.

But if the surface was painted with enamel, then in this case it will be possible to paste the wallpaper directly on the walls. But you must first make sure how firmly the paint substance is held on the wall. You need to remove the enamel in those places where the substance itself falls off. Be sure to go over the entire surface with coarse sandpaper and remove dust from the wall. For greater strength, it is recommended to pre-glue the surface with a special impregnation for walls.

Pasting concrete walls

Since we are talking about how to glue wallpaper on paint, and we are talking about non-standard surfaces, we should definitely mention an ordinary concrete wall, which can serve as the basis for wallpaper. Many developers are interested in how to glue wallpaper on concrete. Of course, it seems superfluous to carry out preparatory measures.

However, it should be noted that wallpaper, especially expensive natural and fabric wallpapers, are very demanding on the evenness of the walls, and concrete walls are a surface that is completely covered with tubercles and ruts. Therefore, in this case, there can be no question of the quality of work.

To prepare the concrete surface for pasting, it is customary to level it with a brick to smooth out the main irregularities. After that, it's time to clean the base with sandpaper and remove dirt and dust. After drying, the walls must be plastered and primed with a high-quality composition, which meets the necessary technical parameters.

The primer must have good moisture resistance properties, provide protection against fungus and mold and, of course, firmly fasten the wallpaper to the surface. Wallpaper glue performs approximately the same functions. Pasting wallpaper on concrete walls can only be done in rooms with low humidity and a complete absence of drafts.

Wallpaper sticker on paint without wall preparation

To find out if you can wallpaper the paint without preparing the walls, test the walls first for strength. To do this, you will need the simplest construction adhesive tape, you need to attach it to the wall that is painted with paint, after that it should be torn off the wall with a sharp movement. If the paint material remains in place and no change occurs, then the paint can be assumed to have passed the test.

But when particles of paint remain on the inside of the adhesive tape, such a coating will have to be completely cleaned off. This will take a long time, so you need to be patient. In this case, clean the paint with a special metal brush that is mounted on a drill, or with a spatula. Solvents are rarely used because of the harmful odor given off by the chemical.

On a wall that has passed the adhesive tape test, wallpaper can be glued without pre-treatment of the surface, because the paint has created a strong, smooth and fairly even surface. Sometimes, in order to achieve a rough surface, craftsmen process the paint with sandpaper. Lastly, remember that you should not stick light thin wallpapers on dark paint, because the dark color will be visible through new finish, completely ruining appearance rooms.

Now you have figured out how to glue wallpaper on paint, and you are ready to put your knowledge into practice. Each room in your house should have its own face and its own unique look, so you should be smart about choosing wallpaper and sticking it on. Proper preparation walls to the subsequent wallpapering is a troublesome and rather expensive procedure, but highly desirable. You need to approach the work with all responsibility, and then the residents of your house will be able to rejoice at the result. The updated design will last a long time.

strport.ru

What types of paints exist

To carry out correct complex preparatory work before wallpapering, you must first analyze the paint material on the wall. Therefore, you should find out what paints are and how to work with them:

Oil paint and enamel paint are similar in appearance to each other, they usually have a durable and smooth finish, each has a sheen or gloss. To determine if it is necessary, chop off a piece with an iron spatula and rub it; oil paint has the smell of drying oil.
Whitewashing is determined quite simply by holding your hand, after which white marks remain on the palm of your hand.
Acrylic water-based paint, visually, can be confused with whitewash. But upon contact, it leaves no traces. For a more accurate analysis, water can be applied to the surface, while whitewashing will become dark, acrylic paint will not change tone.
Water-based paint is easily washed out if you wet a rag and run it over the surface. In addition, it, like whitewash, darkens when it comes into contact with water.

Wall preparation

After a deep study of the walls, you can proceed to action. The surface should be smooth without pits and bumps, if any, then all defects should be removed. Pits and cavities are puttied, all bulges are polished with sandpaper or a metal nozzle for a drill or grinder. Well, first things first.

First of all, you need to understand on which surface wallpapering is not recommended:

It is necessary to exclude lime or chalk whitewash, since when wet, the whitewash easily moves away from the surface. Some workers, of course, experiment with sticking to whitewash, but first impregnate the chalk surface with a deeply penetrating primer. But even such measures do not give a 100% guarantee. If, for some reason, the primed whitewash picks up moisture, then immediately, it will depart along with the wallpaper.
Old and peeling paint under weight, can slide along with the trellises or partially puff out.
The plaster or putty is cracked in places and moves away from the walls.
It is not recommended to apply thin and light wallpaper on a dark base, especially if the wall is spotty. Otherwise, all this will appear under the wallpaper.

Wallpapering with oil paint

After all the inspections, you can conduct another test, for this, adhesive tape or masking tape is glued to the oil paint and torn off with a sharp movement. If there are no traces of paint on the adhesive tape, then we perform the following manipulations:

the surface of enamel or oil paint must be made rough by rubbing it with sandpaper;
all potholes, chips are puttied with oil putty;
dust is removed from walls and floors;
impregnate with a primer with the addition of a solvent in a ratio of 1: 1;
for a greater adhesive effect, PVA glue 1: 4 can be added to the adhesive solution.

Some craftsmen go through the walls with liquid glue before pasting. When the surface dries, wallpaper is glued.

Working with a whitewashed surface

In order for the work to be of high quality, it is necessary to wet the walls with water or a special solution and clean it off with a wide spatula. Of course, this is a time-consuming process, but also a guaranteed job. After cleaning, the surface must be primed with a deep-permeable composition. After the primer dries, you can safely glue the wallpaper.

If the owner of the apartment wondered how to stick the wallpaper directly on the whitewash, then in principle this is not a problem. To do this, it is necessary to saturate the walls well with a deep penetration primer. To prevent the chalk from coming off during pasting, it is recommended to apply glue only to wallpaper sheets. This option will allow only one touch on the wall, if you need to remove and re-glue, then be sure that all the whitewash will remain on the sheet. This type of surface is unreliable and therefore only light paper wallpapers with good throughput should be applied.

Wallpapering with acrylic paint

Before pasting the surface treated acrylic paint, it is necessary to clean it from problem areas in the form of fat, and then soak it with a primer mixed with a solvent. This will securely strengthen all the layers that are applied to the wall. After complete drying, it is recommended to additionally go through the primer.

For this purpose, a special acrylic-based concrete-contact primer is also well suited, sold at any building materials store.

How to glue wallpaper on water-based paint

To paste wallpaper on water-based paint, you must perform the following steps:

sand uneven areas with sandpaper, then putty all problem areas;
degrease contaminated areas with detergent;
impregnate the surface with acrylic primer and wait until the walls are completely dry;
use paper or non-woven wallpaper, as they contribute to the rapid drying of moisture;
apply glue for intended wallpaper.

If you follow the technological recommendations, then it is necessary to paste on cleaned walls, this is better than gluing wallpaper on paint, because it is impossible to analyze 100% the strength and stability of the paint over the entire working area. But if, nevertheless, you decide not to clean off the paint, then when examining the quality of the old paint, take Special attention top, center and bottom of the wall.

How to glue wallpaper on a concrete base

Concrete walls have pores in the form of small bowls and pits; it is not advisable to glue wallpaper on such a base; upon closer inspection, poor-quality work will be visible. Therefore, the walls need to be primed and puttied. It often happens that during pasting the wallpaper in the area of \u200b\u200bthe corners, folds are obtained, this indicates that corner connections uneven. To avoid such a turn, it is necessary to remove them with a plaster solution. To do this, the finished mixture is thrown into the corners and the plaster rule is diverted first in one direction, then in the other. If you use plaster with a fine-grained fraction, then you can do without subsequent puttying. When the solution is completely dry, you can proceed to the main process.

How to glue wallpaper

When the surface is completely ready, you can start pasting the wallpaper. First of all, you need to cut the sheets in length. After that, the front side, the canvas is laid on a clean floor and glue is applied with a roller. The edges must be abundantly impregnated with adhesive mass, otherwise, when the glue dries, the wallpaper in these places will protrude.

You can start from a window or corner if it is perfectly flat. Some masters, for fidelity, also apply glue to the wall, but if the wall is primed and the sheet is well saturated, then you can do without unnecessary manipulations. First of all, the edge of the sheet is attached to the corner, and then it is smoothed from the middle up and down with a special wallpaper trowel to remove all the bubbles. It is important to remember that it is not advisable to peel off the glued sheet, especially if there is old paint under it.

The second sheet is joined to the first, all joints are wiped with a damp cloth to remove the squeezed out glue. The main thing is that the first sheet must be laid vertically without the slightest deviation, otherwise the last sheet will lie crooked. When all the whole sheets are glued, you can move on to the pieces above the door, window and behind the battery.

Tools that may be required for work:

Iron spatula.
Plastic spatula (for wallpaper).
Roller and brush.
Sponge or rag.
Glue container.
Masking tape.
Scissors and a construction knife (can be clerical).
Sandpaper.
Drill and nozzle for removing paint (if you decide to strip the paint).
Plaster rule (align corners).

Before pasting, it is necessary to remove all sockets and switches, and then cut the sheet pasted on the wall with a construction knife and put the boxes in place.

It is impossible to open windows during pasting and make drafts, otherwise all work will go down the drain, when the glue dries, the room should have a stable temperature.

Some wallpapers have a pattern that will have to be selected. In this case, you must purchase a spare roll.

The packaging with glue indicates the consumption of the finished solution, but as practice shows, you need to buy 1-2 more packs of glue. If applied to drywall or plywood, then it may be enough, but if it is a porous surface, then the mass declared on the packaging will not converge with reality.

Now you know how to stick wallpaper on paint, following all the recommendations, you will be able to qualitatively implement this work from start to finish.

The decision to renovate does not come immediately. However, even then we try to delay this process until the last moment, when the finish of all surfaces slowly begins to fade, and in some places even fall off. Therefore, in order to refresh your apartment or house, it is often enough to carry out repairs "quickly". And here a serious question arises, how to decorate the rooms in your house. Wallpaper is becoming more and more popular at the moment as an inexpensive and most effective way to finish ceilings and walls. But what to do if the old paint, applied a long time ago, remains on the walls, and how to glue the wallpaper on the paint. This is possible subject to certain prerequisites.