Ghk 8 1.6 500m manual. Stationary large volume gasifiers (GCC). Gasifiers cold cryogenic series MCC

SPECIAL OFFER FOR RESTORED GCC-0.5/1.6 AND GCC-3/1.6 GASIFIERS

Hurry up to order a gasifier on super favorable conditions. The promotion is valid from 03/10/2020 to 04/10/2020! The number of vehicles is limited!

Gasifiers are designed for transportation and storage, as well as gasification of liquid oxygen, nitrogen, argon and delivery to the network to the consumer in a gaseous state with automatic maintenance preset values ​​of pressure and flow. Gasification of liquid cryogenic products is carried out without the supply of additional energy and is more convenient and economical than gas supply using gasification plants, recipients and cylinders.

Our company in Yekaterinburg completes the equipment necessary to solve the customer's production tasks: in horizontal and vertical versions, with different working pressures and capacities. We carry out design, installation, commissioning, conduct practical training of personnel, provide warranty and post-warranty service maintenance of equipment.

Fill out the questionnaire and we will select a gasifier for your requirements. The application can be sent to the email address or via the feedback form.

Device

The gasifier is an autonomous complex consisting of a cryogenic tank, a block of evaporators, an armature cabinet, in which shut-off and control and safety valves, control devices and piping are located.

The unit is equipped with a safety system with safety valves and safety burst plates to protect the tank. The support system is designed according to the seismic requirements of UBC, zone 3, in order to withstand tremors. The construction of a foundation is required for the installation of a gasifier.

Advantages and distinctive features of the GCC

	Ergonomics and economy. Cold gasifier is usually used instead of cylinders high pressure in order to save usable space. This allows you to store a larger amount of the substance consumed by the production with less space and finances. A tonne of a liquid product is equal to 100 cylinders of a gaseous product with a volume of 40 liters. The use of a gasifier reduces the cost of 1 conditional cylinder by 3 times.
	Minimum product loss through the use of perlite-vacuum insulation.
	Ease of maintenance. Gasifiers do not require the constant presence of the operator, there is no need for external energy sources.

Good to know!

To ensure that a liquid product (nitrogen, argon or oxygen) does not lose its purity parameters during storage, experts recommend degreasing cryogenic tanks at least once a year. VOR – tank degreasing plant is what you need if you have your own large fleet of tanks. This is your independence from service companies.

If you have a small fleet of containers, it is more profitable for you to order a degreasing service. Our company provides a full range of services: from diagnostics to a full cycle of repair and restoration work.

Transportation of gasifiers

When transporting the gasifier, the following requirements must be observed:

1. The valves must be closed, the level gauge must be switched off.
2. It is not allowed to transport the gasifier with a liquid product.
3. The maximum speed of movement from the MCC along the highway should not exceed 50 km/h.

Our capabilities

Professionalism and confidence, backed by technical knowledge, modern equipment and the latest technologies:

• Own staff of design, engineering and technological services,
• Welding equipment, technologies and specialists certified by NAKS are the key to the impeccable quality of manufacturing cryogenic equipment.
• Modern equipment for diagnostics of tightness, which allows to determine the leakage of the inner vessel and casing up to 5.0 * 10 -13 m 3 * Pa / s.
• Advanced vacuum and high-vacuum equipment allows creating a vacuum in the interwall space up to 7.3*10 -5 Pa.
• Multi-stage control and the use of materials and components only from proven and confirmed partners allows us to guarantee the perfect operation of the equipment for many years.

Cooperating with us, clients receive:

• Package offer: delivery, installation, commissioning of equipment, practical training of service personnel - we will perform promptly and efficiently.
• Diagnostics and repair - as soon as possible. Our own mobile service department travels to anywhere in the world, performing the work necessary for the customer both on its territory and at the production base of our company. A regularly replenished warehouse of components and spare parts allows us to carry out work in the shortest possible time.
• 100% confidence in the quality of GCC. We are 100% confident in the reliability of the equipment produced and offer an extended warranty for up to 5 years.

Refurbished MCC

The company "DIOXID" carries out high-quality restoration of cryogenic equipment of any manufacturers - both domestic and foreign (China, USA, Canada, Europe). Mothballed equipment is equipment that, for one reason or another, was little or almost never used by the owner, most often was mothballed. It is in good technical condition with a minimum level of wear and a large residual resource.

In the process of restoration, modern fittings and high-quality materials are used, the entire range of repair and restoration work is carried out, if necessary, an industrial safety examination is carried out with an extension of the life of the cryogenic vessel.

You'll be up and running with your equipment in as little as 14 days instead of waiting 4 months for new equipment to be manufactured.

Cold cryogenic gasifiers, volume from 1 to 100 m3 - how to buy?

Contact our specialists in any of the proposed ways

We guarantee a high-quality and prompt response!

	Nominal volume, m 3	Maximum operating pressure, MPa	Maximum amount of stored product, kg			Equivalent to 40 l cylinders, pcs			Overall dimensions (L*W*H), excluding evaporator, mm	Tank weight, no more than, kg
			Nitrogen	Argon	Oxygen	Nitrogen	Argon	Oxygen
MCC-2	2	1,6 (3,5)	1539	2660	2166	221	266	271	2300x1750x2200	1800
MCC-3	3	1,6 (3,5)	2300	4000	3200	332	399	406	1900-2100x1900(2100) x3850	2200 (3000)
MCC-5	5	1,6 (3,5)	3800	6700	5400	552	662	677	1900(2100)x1900(2100) x5700	3000 (4100)
MCC-6	6	1,6 (3,5)	4600	8000	6500	664	798	812	1900(2100)x1900(2100) x6500	3300 (4680)
GCC-8	8	1,6 (3,5)	6140	10640	8660	877	1062	1080	1900(2100)x1900(2100) x8250	4200 (5800)
GHK-8M	8	1,6 (3,5)	6140	10640	8660	877	1062	1080	2400(2600)х2300(2400) x5250	4300 (5800)
GCC-10	10	1,6 (3,5)	7675	13300	10830	1104	1324	1354	2400(2600)х2300(2400) x6400	4980 (7000)
GCC-15	15	1,6	11510	19950	16245	1656	1986	2030	2400(2600)х2300(2400) x8650	6650
MCC-20	20	1,6	15350	26600	21660	2207	2648	2707	2500(2500)x2400(2600) x8500	8550
GCC-25	25	1,6	19190	33250	27075	3037	3367	3384	2600(2600)х2500(2700) x9350	10700
GCC-30	30	1,6	23085	39900	32490	3311	3973	4060	2700x2600x12600	18950
GCC-50	50	1,6	38475	66500	54150	5483	6622	6768	3100x3000x12820	31190
GCC-100	100	1,6	80800	139400	108300	10965	13243	13537	3530x3350x17600	52080

The gasifier is an autonomous complex, structurally consisting of the following elements:

1. inner vessel (welded, stainless steel sheet),
2. casing,
3. evaporator,
4. piping,
5. armature kit.

The vessel is thermally insulated using multilayer screen-vacuum insulation. The space between the vessel and the casing is evacuated. To deepen the vacuum on the inner vessel there is a pocket for filling the sorption material - zeolite.

The vessel is installed in a casing on fiberglass supports and is centered in the upper part of the tank. A membrane is installed on the lower bottom of the casing, which is triggered by excess pressure in the casing.

The gasifier has slinging devices for mounting and rigging. To limit the pressure in the vessel and product communications, safety valves are installed on the piping, which are adjusted at the beginning of the opening.

If it is necessary to reduce the allowable working pressure in the vessel, the safety valves are reconfigured to a pressure in the same range. The pressure booster evaporator is located under the gasifier and consists of profiled aluminum elements connected in series. The production evaporator is installed separately and consists of profiled aluminum elements.

With an increase in pressure in the gasifier above the working one by 0.05 MPa (0.5 kgf / cm 2), gas extraction from the pressure rise evaporator stops, while excess gas enters the consumer's line.

Stationary gasifiers GCC

Gasifier GKhK-3/1.6-200 (M)

Gasifier GKhK-8/1.6-500 (M)

Gasifier GKhK-8/1.6-1000 M

Gasifier GKhK-25/1.6-500 (M)

Stationary gasifiers cold cryogenic type GCC intended for storage and gasification liquid oxygen, nitrogen, argon and issuance to the network to the consumer in a gaseous state, with automatic maintenance of the set pressure up to 1.6 MPa, and flow rate within the passport characteristics.

Gasification liquid cryogenic products using atmospheric evaporators is produced without the use of electrical energy and is more convenient and economical, being an alternative to gas supply using recipients and cylinders .

Gasifiers GCC type is an autonomous complex consisting of:

1. cryogenic tank
2. Atmospheric evaporators
3. instrumentation
4. Shut-off and control valves
5. Safety valves
6. Pipeline strapping.

GCC - 3/ 1.6 - 500

Productivity, nm 3 / h
Working pressure, MPa
Hydraulic volume of the gasifier, m 3
Cold cryogenic gasifier

Technical characteristics of stationary large-capacity gasifiers of the Mining and Chemical Combine

Product designations	Gasifier GKhK-3/1.6-200 (M)	Gasifier GKhK-8/1.6-500 (M)	Gasifier GKhK-8/1.6-1000 M	Gasifier GKhK-25/1.6-500 (M)
Capacity, m 3	3	8	8	25,4
Working pressure, MPa (kgf / cm 2)	0,1-1,6 (1-12)	0,1-1,6 (1-12)	0,1-1,6 (1-12)	0,1-1,6 (1-12)
Productivity for gaseous oxygen, m 3 / hour	200	500	1000	550
Weight of empty gasifier, kg	3695	6782	7632	15000
The amount of the poured product, kg
oxygen	3500	8700	8700	27400
nitrogen	2500	6200	6200	19500
argon	4300	10700	10700	33600
Overall dimensions of the tank, mm (length, width, height)	2390x2170x3000	2380x2170x5570	2380x2170x5570	6400x4000x7400

Cold cryogenic gasifiers are installed outside buildings and placed on an open concreted area with a canopy and fenced around the perimeter metal mesh. The use of asphalt floors in rooms where liquid is stored oxygen, not allowed. In rooms where gasifier , only central steam or water heating and lighting with electric lamps in hermetic fittings, and fuses, switches and knife switches should be located outdoors. All fittings and pipelines located in the room are made of copper or brass.

Cold cryogenic gasifiers type GCC(the product of pressure (MPa) and capacity (m 3) is more than 1.0) have certificates of conformity and are subject to registration with the bodies of Rostekhnadzor.

Scope of gasifiers

1. The medicine.
2. Food industry.
3. Metallurgy.
4. Oil and gas production and processing.
5. Agriculture.
6. Engineering.
7. Building.
8. Optics.

Complete set of the gasifier

1. cryogenic tank
2. Atmospheric evaporators
3. Instrumentation
4. Shut-off and control valves
5. Safety valves.
6. Piping piping.

Documentation supplied with the gasifier

1. Passport of the pressure vessel.
2. Appendix to the passport of the pressure vessel. Strength calculation
3. Form
4. Album of drawings
5. List of spare parts and accessories
6. Instructions for technical examination
7. Vacuum Recovery Instructions
8. Instructions for determining the oil content in liquid oxygen and solvent.
9. Method of technical examination.
10. Passport for automatic drainage valve
11. Passport for pressure regulator
12. Passports for valves safety spring
13. Passports for shut-off valves

Gasifier, you can contact our managers.

Cold cryogenic gasifier GKhK 250/0.8 for LNG horizontal (subject to registration with Gosgortekhnadzor) is a complex unit consisting of a cryogenic vessel (CFW 250/0.8 LNG) without a production evaporator for storing a cryogenic product and dispensing gaseous separation products air at operating pressure. GCC 200/0.8 for LNG are designed for integration into existing terminals for the distribution of liquid cryoproduct, or its gasification through pumps and high-pressure liquid evaporators.

The main components of the gasifier:

• Cryogenic vessel CFW-250/0.8 LNG is an isothermal double-walled vessel, made specifically for LNG, with perlite-vacuum insulation. The vessel is designed for transportation, storage and dispensing of a liquid cryoproduct under a given pressure.
• The pressure booster evaporator is an atmospheric heat exchanger of small capacity, designed to maintain a constant predetermined pressure in the vessel. The pressure in the vessel is equal to the pressure of the liquid cryoproduct delivered to the line of the production evaporator.
• Production evaporator - liquefied natural gas gasifier does not have its own production evaporator and is intended for integration into existing terminals for the distribution of liquid cryoproduct, or its gasification through pumps and high-pressure liquid evaporators.
• Pressure regulator - This regulator has two purposes:

Vessel pressure regulation, economizer function. During the pressurization, the saturated vapor from the pressurization evaporator passes through the pressure regulator into the gas fraction of the inner vessel. Due to this operation, the gasifier can maintain the required pressure constantly. Excessive pressure in the gas fraction can be relieved through the regulator to prevent the safety valve from tripping and losing gas.

Reduction of excess pressure is carried out automatically, without operator intervention.

• A set of pipelines is a set of all cryogenic and gas pipelines connecting the above units to each other.
• Fittings - a set of shut-off, control and safety fittings, which, according to PB 03-576-03 (rules for the device and safe operation pressure vessels) must be installed on all gasifier units.
• A set of instrumentation - devices for monitoring pressure and liquid level in a vessel.

The cold cryogenic gasifier GCC 250/0.8 for LNG is not as popular as its counterparts for liquid oxygen, argon and nitrogen, due to the low development of liquid methane infrastructure.

Advantages:

The purity of the resulting product: the inner vessel is made of stainless steel, which guarantees the absence of chemical bonds between the material of the vessel and the working medium, which in turn guarantees an increased purity of the resulting gaseous product. This advantage gave gasifiers wide application in science, the processes of studying the composition of materials, laser cutting of metal, and others technological processes requiring high purity gas.

Technological convenience: gasifier GCC 250/0.8 for horizontal LNG is able to replace about 23,707 standard 40-liter cylinders. When operating the gasifier, there is no need to transport, unload and load bulky and dangerous cylinders. Achieved significant savings in transport costs. There are no operations for connecting and disconnecting cylinders in the gas train.

Space saving: a cryogenic vessel that contains liquefied gas takes up about 10 times less space than standard 40 liter cylinders with an equivalent amount of gas. Liquefied gas, during evaporation expands by about 650-700 times in volume. Even under the condition of strong compression (the pressure in a 40-liter cylinder is 150 kgf/cm), which increases the danger, the gaseous product and its heavy steel shell occupy a large number of space.

Safety: The cold cryogenic gasifier GCC 250/0.8 for LNG has an operating pressure of up to 8 kgf/cm, when the operating pressure of a standard cylinder is 200 kgf/cm. Due to its volume, the gasifier provides production continuously for a significant period of time, therefore, workers do not have constant and random access to it, which increases the overall safety of production.

Economic feasibility: the cost of a liquid cryoproduct is approximately 40-50% lower than the cost of a gaseous product in standard cylinders. The manufacturer of the gaseous product does not bear the costs of gasification, filling, loading and storage of cylinders, which allows him to reduce the retail price for liquid air separation products. Depending on the configuration, gasifiers have a payback period of 6 months to several years.

Kriokomplekt LLC offers the following spare parts and fittings for cold cryogenic gasifiers GCC: Bellows vacuum valve DN25, 10/TRZhK-4M (COP 7104.000) DU25 pressure regulator 7758.000 (COP 7758.000) Valve Drainage automatic AK 7543.000-01 (COP 7543.000-01) Valve Safety Full-dimensional spring DU25, AK 7547.000 (COP 7547.000) Valve Safety full-dimensional spring DU10 RR16, AK 7546.000 (COP 7546.000) Vent a three-way DU4 RP25, AK 7138.000 (COP 7138.000) Evaporator AK 1502.03.000 (COP 1502.03.000) Panel AK 1502.02.120 (COP 1502.02.120) Vental Cold Du32 RU16, AK 7968.000-09 (COP 7968.000-09 ) Check valve Du25, AK 7544.000-01 (KS 7544.000-01)

Gasifiers are designed to maintain pressure in isothermal storage tanks for liquefied CO2 by gasifying the liquid phase while consuming the gaseous phase of CO2.

The gasifier consists of an evaporator column, a heater made of 12X18H10Ti stainless steel, and an automatic control unit.

Steam carbon dioxide gasifiers are designed to take liquid carbon dioxide according to GOST 8050–85 from an isothermal tank, convert it into a gaseous state and supply it to a consumer line. The gasifier consists of a vertical heat exchanger, consisting of a body and a tube bundle. An inlet is located in the lower part of the heat exchanger, through which liquid carbon dioxide enters the tube bundle.

Steam is supplied to the heat exchanger housing, which, washing the tubes from the outside, heats liquid carbon dioxide and turns it into gas, which enters the consumption line through a fitting.

The gasifier has a safety valve for automatic release of carbon dioxide from the gasifier into the atmosphere when the maximum operating pressure is reached, and an electromagnetic valve that controls the supply of liquid carbon dioxide to the gasifier.

To control the pressure and temperature of gaseous carbon dioxide and water, the gasifier is equipped with pressure gauges and thermometers.

The equipment is equipped with a complete...

POWER FROM 70 KG/HOUR TO 500 KG/HOUR

GASIFIERS ELECTRIC TYPE"GU"

The gasifier is designed for gasification and maintenance of a given pressure in an isothermal tank at the expense of gaseous carbon dioxide from it.

The pressure is maintained by evaporating the liquid phase of carbon dioxide in the gasifier and returning it in the form of gas to the reservoir or to the consumer line. depending on the chosen scheme of gasification of liquid carbon dioxide.

The gasifier consists of an evaporator column and an electric control unit. Gasification of liquid carbon dioxide occurs directly from electric heaters, excluding intermediate heat carriers.

During operation of the gasifier, automatic switching on and off heating elements(heaters) occurs in accordance with the signals from temperature and pressure sensors, maintaining their values ​​at the level that is set by the temperature and pressure settings on the gasifier devices.

The evaporator and heating elements of the gasifier are made of...

LLC "Kadi" Carbon Dioxid (Samara) offers carbon dioxide complexes for the supply of carbon dioxide line for carbonation of drinks, complexes for feeding plants with carbon dioxide, complexes for the production of aerated chocolate, complexes for the production of Ar + CO2 welding mixtures from design to installation "under key":

Tank semi-trailers for transporting liquid carbon dioxide TsZhU-4.0; TsZhU-8.0; TsZhU-10.0, TsZhU-17.5; TsZhU-22.0,

Storage tanks for liquid carbon dioxide UDKh-4.0; UDKh-8.0; UDKh-10.0; UDH-12.5; UDKh-20.0; UDKh-30.0 UDKh-40.0 UDKh-50.0

Pressure reducing unit in the tank APD-12.5

SPU10/50 carbon dioxide overflow stations,

Stations for charging carbon dioxide cylinders and fire extinguishers. SZU800/SZU-800D

Carbon dioxide gasifiers GU125….GU1000,

Carbon dioxide heaters PU125…GU1000.

Pressure regulators AR-40…AR-60.

Heater

The heater is designed to heat and maintain a constant temperature of the process gas coming after the gasifier, after the reservoir of an isothermal or other gas source (carbon dioxide, argon or mixtures thereof) before the line consuming it.

The heater consists of a heating column and an electric control unit.

The gas is heated directly from electric heaters, excluding intermediate heat carriers.

During the operation of the heater, automatic switching on and off of heating elements (heaters) occurs in accordance with the signals.

The gasifier is designed to maintain a predetermined pressure in an isothermal tank at the expense of gaseous carbon dioxide from it.

The pressure is maintained by evaporating the liquid phase of carbon dioxide in the gasifier and returning it in the form of gas to the reservoir or to the consumer line.

The gasifier consists of an evaporator column and an electric control unit.

PROMGAZTEKHNOLOGIYA LLC offers cold cryogenic gasifiers of any capacity, oxygen and carbon dioxide gasifiers, liquid oxygen and nitrogen gasifiers from a warehouse in Pskov.

Gasifier GKhK-3, GKhK-8, TGKhK 1.0-0.06 / 1.6, SGU-7K, GU (S) -7.4 / 200, AGU-2M (based on ZIL 130), TsTK-8 , TsTK-5, TsTK-2.5, TsTK-0.5, Filling ramps, CONTROL BOARDS, CRYOGENIC PUMPS, as well as a wide range of cryogenic, carbon dioxide equipment.

LLC "IzhKrioTekhnika" offers YOU gasifier GKhK-0.2/2.0-30 for rent.

A gasifier is equipment designed to transport, store liquid oxygen (nitrogen, argon, carbon dioxide) and deliver it to the consumer in a gaseous state.

Gasifier GKhK-0.2 / 2.0-30, filled with oxygen, weighs 435 kg, by the amount of gaseous product it replaces approximately 24 forty-liter cylinders (with an operating pressure of 14.7 MPa) with a total weight of 1776 kg.

The gasifier is made in a protective frame on wheels and can be moved by one person.

Scope of gasifiers: gas cutting, laser cutting, plasma cutting and welding, flame and heat treatment of parts, food industry, medicine, cosmetology, fish farming and much more.

Detailed information on the company's website and by phone.

The production company LLC "IzhKrioTekhnika" is engaged in the production and supply of a wide range of cryogenic equipment, incl. cold cryogenic gasifiers with a volume of 80 to 60,000 liters.

Simply give us a call and our experts will be happy to help you choose the right equipment for YOU.

You get RELIABLE high-quality equipment that works autonomously without power consumption.

LLC "IzhKrioTekhnika" offers to purchase the gasifier GKhK-0.2 / 2.0-30 on very favorable terms.

Specifications and appearance gasifier can be viewed on the website.

The equipment was manufactured in 2014.

The gasifier does not require registration with Rostekhnadzor.

LLC "IzhKrioTekhnika" offers to purchase the gasifier GKhK-0.2 / 2.0-30 on very favorable terms. You get RELIABLE high-quality equipment that works autonomously without power consumption, as well as compact, safe, transportable, economical equipment.

We will select the best equipment.

Gasifier, you can contact our managers.

Cold cryogenic gasifier GCC 50/0.8 (subject to registration with Gosgortekhnadzor) is a complex unit consisting of a cryogenic vessel (CFL Y50/0.8) and a production evaporator for storing a cryogenic product and dispensing gaseous products of air separation under operating pressure . GCC 50 / 0.8-1000- has a working pressure of up to 8 bar, in contrast to the standard pressure of 16 bar, which allows for finer adjustment of the gas at the outlet, increased safety, saving materials, due to the thinner vessel wall. Most often, such an oxygen gasifier is used to supply oxygen gas to steelmaking furnaces. It is also often used as a storage of liquid air separation products (similar to BSH).
Cold cryogenic gasifier GCC 50/0.8 is often used as a medical gasifier. For a continuous supply of a gaseous product, two vessels are often installed and combined along the line for dispensing a liquid product into a production evaporator. The operating pressure in the hospital consumption line is no more than 4 bar, so the cryogenic vessel does its job perfectly.

Further in the text, we will analyze the main properties and advantages of a cryogenic gasifier over traditional methods of storage and use of air separation products in standard 40-liter cylinders.

among the people this species equipment has different names: nitrogen gasifier, oxygen gasifier, medical gasifier, cryogenic gasifier - just variations of the names of the same equipment.

The main components of the gasifier:

• Cryogenic vessel CFL-Y50/0.8 is an isothermal double-walled vessel with perlite-vacuum insulation. The vessel is designed for transportation, storage and dispensing of a liquid cryoproduct under a given pressure.
• The pressure booster evaporator is an atmospheric heat exchanger of small capacity, designed to maintain a constant predetermined pressure in the vessel. The pressure in the vessel is equal to the pressure of the liquid cryoproduct delivered to the line of the production evaporator.
• Production evaporator - an atmospheric heat exchanger designed to convert a liquid cryoproduct into a gaseous fraction due to natural heat exchange with the environment, and deliver it to the consumption line at a given pressure. Cold cryogenic gasifier MCC 50/0.8 Has a production evaporator with a capacity of 500 m3/hour. CRYONICA is ready to manufacture an evaporator of any capacity for you to order.
• Pressure regulator - This regulator has two purposes:

Vessel pressure regulation, economizer function. During the pressurization, the saturated vapor from the pressurization evaporator passes through the pressure regulator into the gas fraction of the inner vessel. Due to this operation, the gasifier can maintain the required pressure constantly. Excessive pressure in the gas fraction can be relieved through the regulator to prevent the safety valve from tripping and losing gas.

Reduction of excess pressure is carried out automatically, without operator intervention.

• A set of pipelines is a set of all cryogenic and gas pipelines connecting the above units to each other.
• Valves - a set of shut-off, control and safety valves, which, according to PB 03-576-03 (rules for the design and safe operation of pressure vessels), must be installed on all gasifier units.
• A set of instrumentation - devices for monitoring pressure and liquid level in a vessel.

The cold cryogenic gasifier GCC 50/0.8-1000 is widely used in all branches of industry and science. A variety of their modifications makes it possible to use it in any production that consumes technical gases (oxygen, argon, nitrogen).

Advantages:

The purity of the resulting product: the inner vessel is made of stainless steel, which guarantees the absence of chemical bonds between the material of the vessel and the working medium, which in turn guarantees an increased purity of the resulting gaseous product. This advantage has given gasifiers a wide range of applications in science, materials analysis, metal laser cutting, and other processes requiring higher gas purity.

Technological convenience: depending on the geometric volume, the oxygen gasifier GCC 50/0.8 is able to replace 6761 standard 40-liter cylinders. When operating the gasifier, there is no need to transport, unload and load bulky and dangerous cylinders. Achieved significant savings in transport costs. There are no operations for connecting and disconnecting cylinders in the gas train.

Space Saving: a cryogenic vessel that contains liquefied gas takes up about 10 times less space than standard 40-liter cylinders with an equivalent amount of gas. Liquefied gas, when evaporated, expands by about 650-700 times in volume. Even under the condition of strong compression (pressure in a 40-liter cylinder is 150 kgf/cm), which increases the danger, the gaseous product and its heavy steel shell take up a large amount of space.

Safety: The GCC 50/0.8 gasifier has a working pressure of up to 8 kgf/cm, when the working pressure of a standard cylinder is 200 kgf/cm. Due to its volume, the gasifier provides production continuously for a significant period of time, therefore, workers do not have constant and random access to it, which increases the overall safety of production.

Economic expediency: the cost of a liquid cryoproduct is approximately 40-50% lower than the cost of a gaseous product in standard cylinders. The manufacturer of the gaseous product does not bear the costs of gasification, filling, loading and storage of cylinders, which allows him to reduce the retail price for liquid air separation products. Depending on the configuration, gasifiers have a payback period of 6 months to several years.