Cabinet for built-in hob. We study the characteristics and choose the best set of built-in appliances for the kitchen. Types of designs of kitchen cabinets for built-in appliances

Currently, the vast majority of kitchen sets are designed with, therefore, understanding the design of such modules is very important.

The box we are considering has two fixed sizes:

This is its width, which is equal to 600mm
And, which is also equal to 600mm (sometimes, the opening is designed with a height of 595mm).

From the total height of the box, only the size of the lower drawer with a facade depends.

The dimensions of the niche for the installation of the equipment we are considering can always be found in the instructions for it.

Let's calculate the details of the module:

Horizon - 600 by 460 (mm) - 1 pc.

Side - 870-28-100-16 \u003d 726 (mm), where 28mm is the thickness of the tabletop, 100mm is the distance from the box to the floor (height of the supports), 16mm is the thickness of the lower horizon.

Side - 726 by 460 - 2 pcs.
Horizon 2 - 600-32=568 (mm), where 32mm is the thickness of the two sides of the box.
Horizon 2 - 568 by 460 - 1 pc.
Body bar - 568 to 100 - 1 pc.

A few words should also be said about the hull bar.

In this case, it is designed alone, moreover, it is located 10mm below the upper edge of the side ().

This is done so that when using a 28mm thick tabletop, it is normally attached to the tabletop and does not rest against the bar itself (sometimes the dimensions of this technique can go beyond the dimensions of the tabletop in height).

By the way, I often met training materials on the net, where in the box we are considering, the hull bar is not designed at all.

I think this approach is not correct, since this bar maintains the distance between the sides of the module, and in any case it is necessary.

Calculate the facade for the drawer below

The height dimension it overlaps is:

870-28-100-600=142 (mm), where 100mm is the height of adjustable supports, 600mm is the inner opening of the box.

You also need to know that the depth of the oven is such that with a rear “overlap” of the countertop on the box of 100 mm (namely, this (and more) size should be given for kitchens that include such modules), in the projection oven(on the wall) there should be nothing (sockets, pipes, etc.), since the cabinet may simply not “fit” into the box.

The photo shows an option when there are sockets on the part of the wall visible through the opening, which then had to be removed. Therefore, these problems need to be addressed at the design stage of the kitchen, and not when it is almost installed. Also, you need to consider the evenness of the floors. If they are not even, then the lower modules will be adjusted, and accordingly, the position of the projection of the opening of our box on the wall will change.

All this must be taken into account.

Similar modules can also be designed in such a way that it is located not from below, but from above, but we will talk about that.

That's all.

See you in the next articles.

Joint integration kitchen furniture and technology is not an easy task, especially when small areas in houses built in the last century. Now in vogue, it allows you to solve two difficult problems: save space and decorate the kitchen according to your own taste. Manufacturers offer a wide range of devices, which makes it possible to create a unique combination of style and functionality. Kitchen sets on sale may have a place for built-in hob and a separate cabinet for the oven or a module that combines both elements. But what is the induction hob and how to choose it for yourself and the kitchen. can see

Varieties of cabinets for the hob and oven

The oven box is an indispensable element in the kitchen if the oven is built-in. It can be installed anywhere.

Curbstones and cases for the oven

There are two design options for placing the oven:

Each of these types has its own advantages and disadvantages.

The box under the hob is a classic option.

The positive aspects of this placement:

Cooking is concentrated in one place, which facilitates the process of caring for devices, saves time and effort of the cook.
The appearance of a standard kitchen is preserved with the original design of the hob and oven.
Comfortable for people of all sizes.

Negative sides of the combination:

Cooking in the oven will require constant tilting.
It is inconvenient to get a hot pan or brazier.
Washing of the inner surface takes place in a bent form.
Water ingress from the stove to the electronic control system.

When placed in a pencil case, the plus will be:

the ability to cook and wash the oven without tilting;
selection of the location of the unit according to the growth of the cooker;
creation of modern kitchen design.

The disadvantage may be the fragility of the structure on which the oven is placed, the weight of which can be more than 30-40 kg.

But what is the difference between an induction hob and an electric hob and which one should you choose?

Video: how to install the built-in hob in the table and connect it yourself

On the video - how the installation takes place on site:

The issue with a cabinet or cabinet for built-in appliances can be solved in 4 ways:

buy complete with oven or hob;
purchase as a separate element of the kitchen set;
order from a furniture company;
do it yourself.

In the first case, this happens infrequently: usually built-in appliances are sold without a box or countertop.

When purchasing furniture, you need to pay attention to the following point: the dimensions of the box should exceed the parameters of the oven by no more than 15-20 mm.

This is a hard limit that must be observed, otherwise problems will arise during operation or when installing the oven:

with a smaller gap between the walls of the box and the oven, there will be no air circulation, which will lead to overheating of the device;
with a larger gap, installation problems will arise.

In custom manufacturing, any option can be provided, including corner placement. It is preferable to entrust the matter to a professional than to do it yourself, since with all the simplicity of the design, installing the box and connecting it requires the knowledge and experience of an electrician.

But which stove is better induction or electric and by what parameters it is worth choosing it, it is indicated

How to choose

Built-in hobs and ovens are sold as a set or individually.

For this reason, hobs are divided into dependent and independent:

for dependent surfaces sold complete with an oven, the control buttons are located on the oven door;
for independent ones, control is located on its surface.

Built-in ovens are available in the following sizes:

width 60, 90, 45 cm;
height 45, 55 - 60 cm;
depth 50 - 55 cm.

The design of the module takes into account the dimensions of the hob: the distance to the wall or other vertical surfaces must be at least 50 mm for air circulation, so as not to cause overheating. The curbstone for the hob and oven can be with a drawer in the upper or lower part.

But what gas stove better for use and by what parameters it is worth choosing, this will help to understand

On the video - how to make the right choice:

Do not mount the stove above an oven that is not ventilated.

The installation of the hob must have a perfectly flat surface so as not to impair its performance.

Connecting the hob to the electrical wiring requires professional knowledge, since the cross section of the connection wire is calculated independently depending on the power of the stove.

The electrical wiring must be protected, and a switch must be installed to turn off the stove in an emergency.

When installing a built-in oven, the following rules must be observed:

the room must be dry;
have a good
the location of the oven must allow easy access to the controls.

In the design of the box, it is necessary to take into account the width, depth of the oven and the size of the gap for the lower (upper) drawer.

If there is a rear wall in the oven box, then it is necessary to cut a hole for electrical wires in it. Wiring must match the power of the appliance.

When installing a gas oven, it is required to connect the main line to the hose from the oven.

The connection must be made by a specialist.

After placing the oven in the box, it is necessary to adjust its position vertically and horizontally and fix it.

Video: connecting the panel to a power outlet

On the video - the rule for connecting the panel to the network:

A cabinet for placing a hob and an oven can be purchased as an element of a kitchen set. If this is not provided, then it is made to order or made by hand. Installation and connection of the hob and oven require professional knowledge of electricity and gas facilities. See also information about and.

Kitchen with hob and oven with built-in fridge and hood

The arrangement of furniture and appliances in the kitchen is quite a complicated matter, especially if the area of \u200b\u200bthis room is small. In this case, built-in appliances come to the rescue, for example, a hob or oven. This design allows you to significantly save space, make the design of the kitchen diverse and modern.

Beautiful kitchen with built-in appliances for convenient use and space saving

Pencil case with built-in oven in the composition of the kitchen

Comfortable, modern and practical option for the kitchen - a kitchen set with a built-in hob and oven. Such devices generally have a separate design. The hob is built directly into the countertop. The oven requires a separate place, and you can not put it on the floor. To do this, you need a box for the oven.

Built-in oven under the hob, color-matched to the interior of the kitchen

Its essence lies in the fact that instead of the usual cabinet in the kitchen set, a place is allocated for the oven. Usually it is installed under the hob, but you can choose any suitable place.

Convenient placement of the built-in oven at a height for ease of use

The oven box is an indispensable element in the kitchen if the unit itself is built-in.

Connecting built-in household appliances to special boxes

Kinds

Wide custom-sized oven for an exclusive kitchen

By opting for a built-in oven, you get the opportunity to diversify the design and furnishings of the kitchen. Unlike conventional ovens combined with a hob, these are completely independent units.

The location of the built-in wardrobe separately from the hob in convenient location and at a comfortable height

In addition to the difference between the functions of the unit itself, there are several types of cabinets for the built-in oven. You can choose the placement of the parting that best suits your kitchen's square footage, layout and design.

Corner kitchen with built-in oven in the table under the hob

There are two main types of construction: a cabinet under the hob with a drawer, or placing it in a pencil case (a tall cabinet with a special compartment and additional drawers). Each of these types has its own advantages and disadvantages. However, according to consumer reviews, placing the oven in a pencil case is much more convenient to use.

Bright kitchen with built-in appliances in the closet

Advantages and disadvantages

Built-in oven for convenient and comfortable use in the kitchen

Let's take a closer look at the pros and cons various kinds oven boxes. To begin with, it is worth noting that the very design of a separate built-in oven has the advantage of ease of use, design, and freedom of placement.

Kitchen with original design with built-in hob and oven

The location of the structure in the cabinet under the hob

Oven built into the cupboard in a classic location - under the hob

– creating a common surface for cooking;

- suitable for people with any height;

- preservation of the appearance of a standard stove with an oven (for lovers of the classics).

- the need to constantly bend over in the cooking process;

– inconvenience when cleaning the oven;

- high probability of damage to the electronic mechanism due to contact with it a large number water from the stove while cooking.

Wooden kitchen with stove and oven in the corner

Placing the oven in a pencil case also has its advantages and disadvantages.

Built-in oven at a convenient height for the hostess, located in the wardrobe

- location at chest level reduces the load on the back during work;

– ease of care due to the location;

– the ability to choose sizes for any height;

- gives the kitchen a new modern look.

Flaws

The only drawback of this design is that it, being high enough from the floor, requires additional reinforcement. When installing, make sure that the lower horizon is firmly set. Otherwise, the oven may collapse on the feet of the hostess in the process of preparing dinner.

Gourmet cuisine in English style with appliances built into the closet

Choosing an electric oven with dimensions for the box

Having decided to buy a built-in oven, considerable attention should be paid to the cabinet in which it will be located. You can purchase it with the oven, however, they are often sold without a box. In this case, you will need to select it yourself. What to look for when buying?

First of all, you need to know the exact measurements of the oven. The height and depth of the box should be 15-20mm more for normal air circulation. In this case, the difference should not be greater, otherwise there will be difficulties during mounting and installation.

Installing and connecting an electric oven

Take care in advance electrical wiring. In the place where the oven is installed, an outlet for wires must be provided in advance, because this species The design does not have a plug, but requires a direct connection to the mains.

When choosing a box, make sure that there are planks that strengthen the horizon.

White kitchen with a ready-made box for built-in white appliances

It is also worth paying attention to the design of the cabinet and the colors so that it harmoniously fits into the already existing kitchen environment.

Kitchen with built-in appliances that matches perfectly in color and size

Do it by hand?

Non-standard placement of equipment in the corner, in a table made to order

In the absence of a suitable box for sale, the question arises whether to make furniture to order, or to design everything with your own hands. In this case, it is better to entrust the matter to a professional. This is especially true for the installation of the cabinet and the oven itself, since electrician skills will still be required here.

Necessary tools for making a box with your own hands

However, if you have experience in making furniture with your own hands, making a box under the oven will not be a problem. To do this, you need to make measurements of the electrical appliance and, in accordance with the data obtained, a drawing of the future product. Further, having necessary tools(saw, screwdriver, electric drill, wood glue) and materials (chipboard, countertop, dowels, furniture confirms, self-tapping screws, guides, legs for the box), you can easily make a cabinet for a built-in oven with your own hands.

Ready-made cabinet for built-in appliances, made by hand

But! If you doubt your abilities, entrust the matter to a professional who will make a custom-made wardrobe in accordance with all your desires.

Case under the oven and microwave oven in the style of minimalism, custom-made

Comfortable small kitchen with custom-made red decor

Video: Connecting the oven

The rules for designing a box for an oven are given in this article.

To find out what a pedestal is hob and an oven, you need to read the instructions of experienced furniture makers.

No normal housewife can do without a quality oven.

Good meals often cannot be prepared without such a device.

Today, a huge variety of varieties of such household appliances are available on the market, differing in design features and the principle of operation, usable volume, etc.

To decide on one model, you will have to consider the main features of modern ovens.

According to the principle of installation, such products are divided into:

Independent, suitable for installation in a furniture niche, easily moved to any convenient place.
Built-in, which are mounted in special furniture niches, are not removed after installation.

The principle of heating the oven can be as follows:

Gas, work with which can only be trusted by experienced specialists of the relevant authorities.
Electric, best suited for self-installation.

In addition to the convenience of installing an electric oven, there are other advantages:

The increase in temperature in a gas oven is carried out due to the combustion of fuel passing into the chamber through a special nozzle. Heating is thus created uneven.
In electric ovens heating elements installed in the chamber from four sides. Thus, the food is heated evenly. That is, the quality of cooked food in electric ovens is much higher.

Oven cabinet design

You can consider two main types of modules for the oven.

In each such model, an additional variation can be applied. The oven with a working surface is the most popular. Another popular option is the oven in a pencil case. The box under the hob can be made in several versions:

With drawer above oven.
With a drawer under the oven.

An oven located at eye level in a special pencil case may have work surface above the cabinet itself in a pencil case without.

What is good box under the hob

The curbstone on the hob and the oven with, into which the insert is made, has the following features:

There is a usable area for cooking.
This design allows you to save free space in the kitchen.
A definite advantage is that a cook of any height can comfortably use such products.

The disadvantages of such boxes include the need to work in a slightly bent state. You will have to bend over all the time when food is cooking in the oven.

At the bottom of the hob is a ventilation system for cooling. When the drawer is placed at the top under the hob itself, there is a possibility of blocking the system due to overheating. If you put, for example, a sheet of paper in such a box, it will immediately be sucked in. Thus, the ventilation system will lose air flow.

Convenient operation of the stove is ensured by placing it at chest level. A housewife under such conditions will cook a lot of tasty and healthy food with great pleasure. To look into the oven, you do not have to bend down every time. If the housewife is small in stature, this arrangement of the oven can cause some inconvenience.

Such difficulties are easily eliminated if the box for the oven is designed according to the individual requests of the client.

Main dimensions

Today, many kitchen sets are made with built-in appliances. So design features such modules need to be understood.

The oven box has two standard sizes:

Width 600 mm.
The height of the internal opening corresponding to 600 mm. In some cases, the height of such an opening is 595 mm.

The height of the box determines only the dimensions of the lower drawer with a front. The dimensions of the niche required for the installation of technical means can always be determined in the instructions. It is these dimensions that the cabinet for the hob and oven should correspond to.

It will be possible to buy such a product cheaply only if the supplier of furniture products provides the opportunity to select individual finished sections.

In the curbstone, the bottom, walls and top panel should not be skewed. The bottom should be as parallel to the floor level as possible.

How to make a cabinet under the oven - on the video: