The obvious advantage of ordinary kettles, in which water is boiled on the stove, is the low price. Enameled kettle , which you buy for a relatively low price, will last you at least two to three years. Stainless steel teapots are more expensive, but if you buy a really high-quality product, you will use it for more than ten years. Therefore, if you are a traditionalist and prefer to buy yourself an ordinary teapot, it remains only to choose which one:

Enameled teapots

enamelled made of cast iron, aluminum or some other metal, which is then covered with several layers of enamel. It protects the metal from corrosion and oxidation in contact with products. Such a product lasts 5-7 years with frequent use. When choosing an enameled teapot, carefully consider whether the enamel is evenly applied, whether there are any cracks or chips on it. After all, if the enamel cracks, the kettle can no longer be used, since enamel particles can get into the tea.

Stainless steel teapots

Stainless steel teapots boil quickly, serve for a long time, they are easy to wash. Such teapots are made from an alloy of chromium and nickel, from which scalpels and other medical instruments are also made. The bottom of such kettles is predominantly thickened, due to which heat is distributed evenly over them and is retained for a long time. However, it is not easy to get a really high-quality “stainless steel” from us: there are many Chinese and Turkish fakes on the market made of cheap metal, often of unknown composition, which can even be hazardous to health. When buying stainless steel cookware, pay attention to the availability of state quality certificates for this product.

Aluminum teapots

Aluminum teapots light and inexpensive. Water boils faster in them than in any other. Many of these products are equipped with a whistle that gives a signal when it is time to remove the kettle from the stove. When choosing such a kettle, make sure that there are no dents on its walls and bottom.

And yet, from what material to buy a kettle?

I advise to buy stainless steel kettle . Such teapots are much less toxic and carcinogenic than aluminum and plastic teapots. And this, in my opinion, is one of the most important things to pay attention to when choosing a kettle.

How nice to sit comfortably with your family and drink a cup of freshly brewed tea. In ancient times, large shiny samovars were used for such tea parties. But in modern world they went to the shelves of antique dealers, and teapots came to replace them. In our article, we will find out what a kettle should be for gas stove and consider famous brands manufacturers.

How to choose a kettle for a gas stove?

To choose a convenient, high-quality, and most importantly safe kettle for a gas stove, you need to know a few rules for choosing a product.

teapot lid

At such an important point as fixing the lid, you should pay attention Special attention. Most modern models of teapots involve the use of lid pads that are not fixed in the sinuses. The use of such dishes can be traumatic, since under the influence of high pressure of hot steam, the lid can fall off and cause burns. Teapots with tight lids best option on every day.

teapot handle

You should also pay attention to the handle of the kettle. It must be made of heat-resistant plastic that will not heat up when boiled. Many unscrupulous manufacturers replace expensive raw materials with a cheaper rubberized counterpart. It feels comfortable, of course, but at a heating temperature of over 70 degrees it will start to heat up and melt.

The handle of teapots made of wood has low thermal conductivity, but tends to dry out and deform.

Kettle bottom

The bottom of kettles designed for gas stoves is different from other types. As a rule, thick steel or even cast iron is used to make the bottom of the dishes. Thanks to these materials, the temperature is evenly distributed and the water is heated faster. In addition, the thick bottom of the kettle cools much more slowly.

Should I choose a whistling kettle for a gas stove?

For the daily rhythm of life, it is recommended to choose a kettle model with a built-in whistle. As a rule, it is installed in the spout of the product and with a characteristic whistle notifies you of boiling water. The whistle is due to high pressure hot steam through a small hole in the valve. This feature allows you to go about your business and not stand waiting for a kettle. Please note that pouring water should not be higher than the mark. Otherwise, when heated and expanded, water will get inside the whistle and there will be no characteristic sound.

Types of kettles for a gas stove

On the market today there are a huge number of types of kettles for gas stoves, made from a wide variety of materials. Let's take a look at the advantages and disadvantages of each.

Enamel teapot

The most popular teapots are enameled. Products made from this material have an ergonomic shape and a variety of designs.

What are the advantages of an enameled teapot?

The main advantage of an enameled teapot is its environmental friendliness. Such a coating is absolutely harmless and does not impart extraneous tastes and impurities even with a long stagnation. boiled water. Also, teapots with enamel have a rather large volume, which is especially important for large families. Due to the special type of coating, the water temperature after heating or boiling decreases more slowly than in dishes of other materials.

Cons of a teapot with enamel

Unfortunately, enameled teapots also have a number of disadvantages. The main disadvantage of this product is its fragility. Over time, under the influence of temperature, the enamel can crack and flake off the outside of the dish. This can also be caused by impacts and active cleaning with abrasive cleaners. The enamel coating is afraid of a sharp temperature drop, so you should not light a fire directly under the dishes. First, turn on the gas stove, and then put the kettle on the burner. Otherwise, black spots may form on the enamel, which will be problematic to remove without effort.

enamel kettle for gas stove

Glass teapot

Recently, glass teapots are gaining great popularity. Having unusual shapes and design, it will easily fit into even the most sophisticated interior.

What are the advantages of glass teapots?

The high thermal conductivity of glass ensures uniform heating over an open fire. In addition, mostly teapots made of this material are attractive for their transparency. You can watch the process of boiling water and even brew tea in it. Especially effective is the use of rolled or budded tea, which, when brewed, opens up into herbal compositions.

Cons of a glass teapot

Of the minuses of glass teapots, it is worth noting that they are quite fragile and their use should be extremely careful. It is important to choose well-known brands of glassware manufacturers, as you risk running into a fake and injuring yourself with a low-quality product. If your water contains lime impurities or you do not filter it before boiling, you should pay attention to the fact that over time a slight coating will form on the inside of the kettle.

glass kettle for gas stove

Kettle for gas stove made of steel

As a rule, in the manufacture of a teapot made of steel, a special anti-corrosion coating is used, or, as in the common people, stainless steel.

What are the advantages of a steel kettle?

The indisputable advantage of a steel kettle is the absence of toxicity. Stainless steel not only does not emit any harmful substances, but also does not react with impurities contained in the water. Also, steel kettles are among the most durable and will not corrode with chemical and alkaline cleaners.

Disadvantages of a stainless steel kettle

Unfortunately, a stainless steel kettle quickly forms scale on the inside of the bottom. To avoid this, it is recommended to boil a kettle of vinegar once a week or citric acid. Also, small drops of water or condensate forms small, but unaesthetic smudges on the mirror surface. After each use, try to rub the surface with a microfiber or felt cloth.

steel kettle for gas stove

ceramic teapot

Natural clay is used to make a ceramic teapot. Under the influence of firing, this material acquires strength, then it is covered with a polymer heat-resistant varnish.

What are the advantages of a ceramic teapot?

A ceramic teapot can be safely called the most natural in composition. Such a product does not emit synthetic impurities and retains the taste and temperature of water for a long time. Most manufacturers of ceramic teapots colorfully decorate the outer part of the dish, stylizing it with painting. In addition, the varnish coating is perfectly cleaned even with abrasive products.

Disadvantages of ceramics

Despite the significant weight of the ceramic teapot, the product is quite fragile. Over time, dishes made of this material can crack under the influence of an open flame of a gas stove, so everyday use is not recommended. Also, the ceramic material of the kettle is inconvenient due to its low heat conductivity, so the process of boiling water will take much longer than usual.

ceramic kettle for gas stove

Cast iron kettle

Manufacturers have long abandoned the use of cast iron for making teapots. The costly processing of this material is not covered by consumer demand.

Advantages of a cast iron kettle

A significant advantage of a cast iron kettle is durability. Cast iron alloy is not only able to serve you for decades, but also retain the original appearance. Also, it perfectly retains heat, and the water cools down much more slowly. The outer part of the product is perfectly clean and does not scratch.

Cons of a cast iron kettle

Despite all the advantages, cast iron teapots have no less significant disadvantages. These include the tangible weight of the product, which is not particularly convenient with constant use. And despite all the strength of cast iron, moving parts can collapse under mechanical stress. Basically, these are the bases for attaching the handle.

cast iron kettle for gas stove

aluminum kettle

Aluminum teapots were especially popular in Soviet canteens and field kitchens 20 years ago.

What are the advantages of an aluminum kettle?

Aluminum is a light metal, so teapots made from it are easy to use. Also, this material is quite cheap, hence the low production costs and low cost. Due to the high thermal conductivity of the aluminum body of the kettle, the water boils quickly enough.

Disadvantages of an aluminum kettle

The most important and dangerous drawback is toxicity. An aluminum kettle can not only form and oxidize various heavy metals, but also change the taste of water during long-term storage. Also, despite the predominantly rapid heating, aluminum also cools quickly. Design solutions for teapots made of aluminum alloy are not provided and do not even have a ceramic coating. This is another additional disadvantage, since for the interior or as a household utensils, such a product will look rustic. Due to the "softness" of aluminum, the kettle is more susceptible to deformation than any other material. Even a light blow on a table or sink will form a small dent, which will be quite problematic to fix.

aluminum kettle for gas stove

Manufacturers of quality kettles for gas stoves

More than 200 teapot manufacturers successfully exist in today's market. Consider the most popular brands.

Brands of metal teapots

The brands of metal teapots presented below have been producing their products for a long time and have already been able to establish themselves as one of the best.

Vitross enameled teapots

The manufacturer of enamelware Vitross has been producing their products in Russia for more than 10 years. Branded heat-resistant enamel for coating teapots provides resistance to mechanical and chemical influences, which allows you to wash products even in dishwashers.

Metrot Stainless Steel Kettles

The Serbian brand Metrot is popular not only in Russia, but also in Europe. Thanks to the patented steel polishing technology, teapots of this brand are quite resistant to mechanical stress. Even when cleaning the surface with a metal brush or abrasive products, the integrity of the polish is not disturbed.

Iwachu cast iron teapots

The famous company specializing in the manufacture of cast iron teapots has been around for over 60 years. The Iwachu company was founded in Japan, where the traditions of the tea ceremony are observed and revered to this day. For the production of cast-iron utensils, the factory uses only high-quality raw materials and processes products manually. The ornament is also knocked out on a manual press. It is worth noting that the maximum volume of Iwachu brand teapots is only 0.7 liters.

Copper Kettle Manufacturer Sri Ram Export

The world famous Indian manufacturer of copper products Sri Ram Export specializes not only in decor items, but also in tableware, including teapots. Distinctive feature inherent in this brand is the high quality of manufactured products and original author's designs. The volume of teapots admitted by the Indian factory is 3 liters. Products with a smaller volume are made to order.

Glass teapot manufacturer Kamjove

One of the most popular manufacturers of glass teapots is the Chinese company Kamjove. This factory produces products from heat-resistant raw materials, which allows the use of products on an open fire. In China, it is customary to prepare tea for one time, so the maximum volume produced by this brand of teapots is 1.5 liters. The glass stand included in the tea set allows you to use the product not only for boiling water, but also for brewing tea.

Regardless of the material from which the kettle for the gas stove is made, the deposit long service and the proper appearance of the product depends in part on proper care behind him.

Kettles sometimes amaze with the abundance of models presented, they all differ in color, design, price and even quality. The variety of materials from which the kettle is made is presented in different price categories. To date, to make a teapot, manufacturers resort to various kinds of materials - this includes high-quality plastic, glass and stainless steel. The material itself does not affect the quality of the device, but the lightness of the product, ease of use and price may depend on it.

Teapots made of high quality plastic are an order of magnitude cheaper than glassware and stainless steel. They themselves are lighter, retain heat longer. As a rule, plastic teapots have a very large color scheme, this material allows you to paint products in all colors of the rainbow. Devices made of such material are arranged with an open heating element and, unlike glass teapots, their body almost does not heat up.

For tea lovers, a teapot made of glass is the best choice. These devices can serve not only as an object for heating water, but also for brewing tea. The technology of the material allows this to be done without any damage to the taste. A glass teapot requires careful handling, because glass, even if it is high-strength, tends to break, and you can get burned on a glass teapot.

As for stainless steel products, they are distinguished by their strength and are quite reliable in operation, they do not have a wide choice of colors, but they usually heat water faster than kettles made of other materials, mainly due to the fact that most steel models in the arsenal of disc heaters.

Metal, glass, and plastic are the three materials most commonly used to make teapots. It is not difficult to choose this household item, it is difficult to decide which teapot is better.

Vote

How much is your electric kettle?

There are many answers to the question “how does the morning begin”, however, the most popular and common answer is still: “With a cup of coffee”. To some extent, this is true, but without which it is impossible to drink that longed-for cup of coffee or tea in the morning? Without coffee, tea, water, sugar and, of course, a kettle. It is this attribute that allows us to enjoy drinks that have long become a tradition. Let's get to know this irreplaceable accessory a little closer. How the electric kettle appeared, what products are made of, which model is better, and what are the advantages of the kettle. You will learn about this from the article prepared for you.

A little history of the teapot

The teapot has long and very tightly entered our lives. It is unlikely that there will be at least one family on the planet whose house does not have a kettle. The first models appeared in the Middle Kingdom, which is not surprising, because China is considered the birthplace of tea in general.

The Chinese guest arrived in Europe much later, only XVII century Europeans were able to experience the happiness of getting to know an important accessory of the tea ceremony. True, the teapots of those times looked little like their modern counterparts, for example, the first models that appeared in Russia, by the way.

For the appearance of an “irreplaceable friend” on the territory of our country, we must thank the northern Scandinavian tribes. It was difficult to call such a teapot a teapot even at that time - in shape it resembled an egg with a handle, which was hung from the ceiling and a fire was lit under it. Several such specimens have been preserved in the teapot museum; outwardly, they resemble something between a washstand and a vessel for pouring herbal medicinal settings. Products then were made only from porcelain or clay.

More or less familiar to us form, the teapot acquired only by the end of the 18th century, just before the peak of its evolution and development.

The appearance of the electric kettle

Inspired by discovery electric current and incandescent lamps, the inventors began to modify and modify everything that came to hand! Our “friend” did not escape this fate either. And, already in late XIX century, the German company AEG introduced the world the first electric kettles.

Initially, myself a heating element resembling a medium-sized electric stove just screwed to the bottom of the kettle, the design was large, heavy and very cumbersome. But already in the 20s of the XX century, the inventors again improved the electric kettle by placing the heating element already inside, then the automatic system, which made heating possible only if there was enough water. Over time, the bulky and inconvenient heating coil was replaced by a disk, which is a flat metal substance to which contacts are connected, due to which the water heats up much faster.

What are electric kettles made of and which one is better?

In the age of high technology, the choice of electric kettles is simply dizzying.

They were originally made:

• from copper;
• become;
• aluminum.

After a certain time, traditional materials were successfully replaced by convenient, cheap and lightweight plastic, however, metal electric kettles soon came into fashion again, this time steel ones. The latest fashion trend is glass electric kettles. Such an electric kettle is an ordinary device for heating water, but at the same time it is very different from its metal and plastic counterparts.

Why is a glass electric kettle better?

The glass electric kettle has a number of advantages and here are just a few of them:

1. Glass material is not only beautiful, but also environmentally friendly, which is much safer for health than plastic, even food.
2. The appearance of such an electric kettle is simply mesmerizing. The designers did their best, the backlight that changes color when the kettle is in operation, and the very sight of boiling water, in the era of gadgets and electronics, soothes and very succinctly fits into any interior. An electric glass teapot is an indispensable attribute of any holiday and, of course, an attractive gift.
3. If you are not a fan of noise, it is better to opt for a glass teapot. When water boils, glass, unlike plastic and metal, does not vibrate, so the model works almost silently.
4. Cleaning such a unit is much easier than plastic. Thanks to the transparent glass, scale cannot go unnoticed, and besides, it does not eat into the walls, as is the case with plastic or metal.
5. If plastic or metal electric kettles cool down rather quickly, and after half an hour the water has to be boiled again, then everything is different. The glass cools slowly, which will help save electricity.

The undeniable advantages of an electric kettle:

As you know, all models are divided into 2 categories: for gas stoves and electric. electrical model differs in that it is able to heat water on its own. What device do you need? Of course, a glass electric kettle is one that is more convenient to use and more attractive. Of course, if you have a gas stove in your house, then a regular kettle will help save money, as it saves electricity. But it heats water much more slowly than electric. An electric kettle will boil in seconds.

About what glass is ideal material, said above. Even if you have decided on the material of the model, it will not be superfluous to consider the various functions and conveniences of the electric device.

One of the points that you should pay attention to is the dimensions, the possibility of transportation and compliance with the interior. An electric kettle is convenient in offices, in the country - it is easily portable and does not take up much space. Elegant models perfectly not only complement the interior, but also decorate it.

When buying an electric kettle, remember that with disc heater water will boil faster and it will be more convenient to clean such a kettle from scale. Convenient function with automatic shutdown- then, even if you forget about the included kettle, after boiling it will turn off by itself. Agree, this is convenient and you don’t need to think when leaving the house: “Is the kettle turned off?”.

Pay attention to the device water filter(unless you have a water purification system installed). It is better if it is removable so that you can clean it without problems. Today there are many features offered, but when choosing, remember that you will pay more for each additional feature than without them.

Summing up, we can confidently note the leadership of such a model as glass electric kettle. Despite his relative youth, he confidently took the TOP positions not only on store shelves, but also in the hearts of numerous fans.

In every home, a kettle is one of the main attributes in the kitchen. Whether we drink coffee in the morning and tea in the evening, we use this wonderful device. How to choose the one that suits you best? The answer is simple - give preference glass electric models. There is a huge selection on the market today: plastic, stainless steel, porcelain, electric. All models have their own advantages and disadvantages. As for the glass electric kettle, there are undoubtedly many more advantages.

Kettle - required item kitchen utensils, which is in every home. Indeed, evenings with family, spending time at a party or lunchtime snacks at work are often accompanied by a pleasant tea party. In the modern world more and more people prefer to use electric devices for heating water, which significantly speeds up the preparation of a flavored drink. But still, many continue to use an ordinary kettle, which is heated with a gas stove.

The main criteria for choosing a kettle

Today, there are a lot of models of household appliances on sale, differing in shape, design, volume and made of various materials.

Before as make delicious tea, it should be remembered that hot water, which is inside the vessel, will always interact with its walls. And in order for it not to lose its taste, and the drink to turn out fragrant and tart, it is very important to choose a good teapot for the stove, made of high-quality material. Therefore, the purchase of dishes should be taken seriously, taking into account the features of the model you like, its size, appearance, as well as the cost of the household appliance.

• Displacement. First of all, it is necessary to decide what volume this or that model should have. For a small family, you can pick up a kettle with a capacity of up to 2 liters, and for a large number people in the house, dishes designed for 3-4 liters are suitable.
• Material. It is very important to decide what your kitchen helper will be made of. Manufacturers offer wide choose kettles made of stainless steel, as well as ceramic, glass and metal. Each of them is convenient in its own way and has certain properties of heating water.
• Pen. Since the household appliance will often be hot, it is necessary that it has a reliable handle. It can be plastic or wooden, the main thing is that the device is comfortable to use and does not burn your hands when touched.
• Additional details. If you need whistling cookware, then it is worth finding quality option, since in such kettles the whistle not only informs about the boiling of water, but also performs an important function. Modern models are equipped with a special valve that allows you to close the nozzle of the device, so that your hands remain protected from steam burns.
• The size. It is recommended to choose dishes depending on the size of the stove and its burners. Remember, a small kitchen helper can get very hot on large burners and its coating will be damaged by fire. Conversely, water in a large kettle is heated very slowly on a small stove.
• Design. Before purchasing, carefully examine the household appliance to determine if it is suitable for your use. To do this, hold the product in your hands, check the convenience of the handle, whether the lid closes tightly, as well as the stability of the selected model.
• Design. It also plays an important role for buyers, since everyone wants to have not only comfortable, but also beautiful dishes. It is desirable that the kitchen helper blends perfectly with the interior of your kitchen. Depending on this and focusing on your own taste, try to choose a teapot with an interesting shape and a suitable color.

In the process of choosing a household appliance, you need to remember that too cheap models, despite their attractive design and affordable price, can be made of poor quality material and have an uncomfortable design. It is possible that the water in such products will not remain fresh for long, and this will affect the taste of tea or coffee, the use of which may be bad for your health. Therefore, it is better to purchase dishes from reputable manufacturers who can guarantee the quality of their goods.

Characteristics of dishes made of different materials

So that the kettle always works properly, is convenient to use and pleases the eye with its appearance, you need to purchase it from a material that will meet your requirements. All products may differ in terms of use, care and other indicators. Therefore, before buying, you need to familiarize yourself with what household appliances are, and then choose the most suitable model for yourself.

This household appliance is made of plastic and durable glass that is resistant to high temperatures, so it is great for heating on a fire. Typically, these products are stylish design and consist of a main body where water is poured, plastic handle and lid.

The glass kettle for a gas stove is very convenient during use because, thanks to the transparent walls, you can always see the water level and control the boiling process. And also the product is very easy to clean, no scale is formed inside it, and dirt does not stick to the outer surface.

A significant drawback of this model is that the device can be easily broken. In addition, the vessel may become cracked from improper heating, rapid cooling after boiling, or a strong blow. Due to their fragility, such products are not very popular with buyers, but thanks to the original appearance, the glass teapot will fit perfectly into the interior of any kitchen.

Enamelled water heater

In many homes of our compatriots, you can see dishes with an enameled surface. These are all kinds of pots, mugs, plates and, of course, a kettle. Today, appliances for heating water differ in various sizes, beautiful views and colors for every taste.

Enameled kettles for a gas stove are made of a very durable material - steel, on top of which an enamel coating is applied. The surface of the vessel is highly durable, such dishes are practically not subject to various deformations and chips. And also it is environmentally friendly, and therefore the water in such a kettle will always be tasty and fresh. The handle of the device is made of wood, usually it has an original shape and bright color.

In order for such dishes to last as long as possible, it is necessary to use them correctly and take care of the inner and outer surfaces in a timely manner. To do this, avoid sudden changes in temperature, as this can adversely affect the quality of the enamel. And during the care of the product, it is not recommended to use aggressive cleaning agents.

ceramic teapot

Ceramic dishes look decent and are quite expensive. It is made according to special technology glass-ceramic or refractory faience. Such products are usually equipped with thick walls, which is why they have a lot of weight, which is not very convenient during operation. Water in ceramic pots boils slowly, but stays hot longer.

The advantage of products made from this material is that they are environmentally friendly and completely safe, they are not able to absorb odors and do not change the taste of water. Such dishes attract attention, look very aesthetically pleasing and therefore are quite capable of enlivening and decorating the kitchen space.

Stainless steel product

The most popular are stainless steel kettles for gas stoves. Users note that these products are practical, easy to use, have a small weight, and also look original and modern.

Water in such dishes does not acquire extraneous tastes, but remains clean and fresh for several days. Products made of stainless steel perfectly tolerate the effects of fire and are not affected by temperature changes. Therefore, metal teapots are able to serve for quite a long time, always maintaining an attractive appearance.

Rating of the best kettles for a gas stove

Thanks to the presented variety of household appliances, you can successfully purchase a high-quality and original kettle based on your own preferences. But it is worth noting a number of products that have proven themselves in the market and are in great demand among buyers. These include the following models:

1. Tefal C7921014. The dishes of the famous Tefal brand are famous for their excellent quality and stylish appearance. The body of this kettle is made of high-class stainless steel, thanks to which the product is very reliable, durable and practically not subject to external influences. The volume of the device is 2.5 liters. The outer surface of the vessel has a matte finish. light gray. The lid is easy to open with a special lever. The kettle is equipped with a whistle to signal the end of the boiling process.
2. Vinzer Symphonia 89003. The product of the Swiss company VINZER is also made of stainless steel. The kitchen helper has a volume of 2.5 liters and a double bottom, and it can also be heated on different types stoves: gas, glass-ceramic, electric, induction. Thanks to the exclusive design, the kettle heats up evenly, quickly, and in a few minutes the water in it begins to boil. The body of the device is glossy, silver in color, the handle is attached on one side and has a curved shape. There is a whistle on the spout, which can be opened using a special button.
3. Mayer&Boch 23855 Whistling enamel kettle made of carbon steel. The model has a volume of 3.5 liters. The handle is made of thermoplastic, on which there is a mechanism designed to control the whistle. The body of the device is of the usual form, decorated with a bright floral ornament. It heats up quickly and is able to keep warm for a long time. The product is designed to be washed in a dishwasher.
4. Mayer & Boch 27501. The kitchen appliance is made of high quality steel and covered with enamel on the inside and outside. The kettle has a classic look, has a capacity of 5 liters and is suitable for use on any stove. The handle is made of ceramics, the surface of the vessel is smooth, light in color, it has a floral pattern. The model looks quite original and will look great on a dinner or holiday table during tea drinking.
5. Kelly KL-3004. The teapot is made of fire-resistant glass, with a volume of 2.2 liters. The model looks quite interesting due to the unusual shape of the case, it has a folding plastic handle and a water filter. The disadvantages of a kitchen appliance include low heat resistance - up to 170 degrees.
6. Rosenberg RGL-250004-M. Glass product for a gas stove with a capacity of 0.8 liters. The kettle is designed for a small family, does not cause problems during operation and is easy to clean. Such dishes have heat resistance up to 145 degrees and have an affordable price.

To purchase a suitable product, you need to focus not only on the brand name, but also carefully study what the kitchen appliance is made of. It should not be forgotten that the aroma and taste of any drink will directly depend on this.

There are a few more things to consider before buying a kettle:

• The rate at which water boils is always determined by the material from which the kettle is made. The fastest way to do this is stainless steel products, which are quite practical, functional and have an affordable price.
• Teapots made of glass or ceramics look very impressive, but due to the low coefficient of thermal conductivity, their walls are often made thin during the manufacturing process. Therefore, these products are quite fragile.
• For a gas stove, a kettle with a classic shape is best suited. Such models are much more convenient to use and are better exposed to uniform heating.

Simple tips will help you choose a kitchen assistant, and soon a beautiful and original teapot made of high-quality material will appear in your kitchen. And communication with family, friends or moments of relaxation will be accompanied by a pleasant tea party.

Attention, only TODAY!