How and with what to paint garage doors? How to paint iron gates beautifully and permanently How to paint metal gates

The paint for the gate should be selected not only taking into account the individual wishes of the owner. The main criterion is compliance with all existing quality standards.

One of the main selection criteria is high quality

The qualities of the paint must allow it to withstand all atmospheric surges, as well as exposure to sunlight, hail, rain and snow.

How to choose paint

The modern market offers a huge amount of paints and varnishes.

Oil enamel has good performance and has high wear resistance

The best paints sold in specialized hardware stores.

The main types of paint are presented in the plate:

View	Description
Molotkovaya	The most popular option. The main advantage is resistance to corrosion and other negative processes. Suitable for both outdoor and interior decoration. The composition of the paint is enriched with metal and silicone resin pigments. Resistance to negative natural factors is ensured precisely thanks to pigments.
oily	Based on drying oil. Designed for outdoor work. The main plus is the democratic cost. It is used infrequently, due to poor resistance to moisture. A few heavy rains can Negative influence on the appearance designs.
Alkyd	The environment has little effect on the paint. One of the undoubted advantages is the presence of high adhesion with the coating. Unfortunately, enamel is toxic. When working with it, you need to protect the respiratory tract as much as possible.
Acrylic	The most popular composition, actively used for interior decoration. Not suitable for outdoor work due to sensitivity to temperature fluctuations. After a certain time, the painted gates lose their attractiveness.

Why choose hammer paint

How to paint metal gates on the street? The ideal choice is hammer or blacksmith paint. The coating is highly durable.

Initially, it was used to decorate equipment in laboratories and factories, which was later intended for use in adverse weather conditions.

The main advantage is durability, as well as the absence of harmful impurities.

Over time, designers drew attention to the specific "shagreen" structure of the paint. Today it is used almost everywhere.

The main advantages include:

excellent decorative properties. The color palette is quite rich. The painted surface is resistant to the effects of the scorching sun and will never fade;
no temperature vagaries have a detrimental effect on the paint;
when the composition dries, there are no toxic fumes. Against this background, it is allowed to use the remains for painting interior items;
the composition is perfect for painting a rusty coating. Pre-processing is not needed;
the composition has excellent mechanical strength;
the paint dries very quickly;
moisture resistance. A high-quality composition is able to protect the metal from corrosion for 8-10 years;
unique texture. If defects are formed, they can be easily retouched. Tinting will not be evident.

Note! With dirt and dust repellency, the paint provides surfaces with a clean “glossy” look in all conditions.

Main cons:

undemocratic price. Given the high consumption, painting can come out "for a pretty penny";
fast adhesion to the surface. This is both a plus and a minus at the same time. The bad news is that paint drops are difficult to remove even with very strong solvents. If you are not lucky to get something dirty in the paint, you will have to tinker for a long time before bringing it down;
the density of the enamel does not allow charging it into the spray gun;
corrosion that has appeared in unpainted areas quickly affects the main area.

Hammerite paint is the perfect choice

Enamel types:

View	What is it	Description
Hammerite	Unique composition 2 in 1. Production - Great Britain.	Expensive composition, practically without flaws. Apply directly to rust. Lasts for decades.
ML-165	The base is styrene-alkyd.	The best qualities are adhesion and resistance to heat (up to +125 degrees). Xylene is used for dissolution. Applies to all types of coatings.
NC-221	Nitroenamel.	The features are mostly decorative. Rather than protective. Not suitable for application on rust. It can be used both inside and outside the house at the same time. Temperature resistance is average.
AP-1323	Epoxy enamel (primer + paint)	A unique composition that allows you to paint any surface. You can work with rust. Removed with Thinner 667. Grade 648 can also be used.

Important! Blacksmith enamel is applied only in calm, sunny weather.

At high humidity you may encounter various difficulties. Perhaps the paint will not go well, and there will be a need for repainting.

Primer for painting

Paint for iron gates involves pre-treatment of the surface with a primer. This helps to increase the quality of adhesion and improve external characteristics. The nature of the primer must fully match the nature of the paint used.

Priming - milestone before staining

What is primer used for? It contains special substances that transform chemical composition rust. The metal retains its properties longer and oxidizes more slowly. Proper use of the primer allows you to make the service life significantly longer.

How the material is applied

You may need the following to work:

selected material;
solvent;
primer;
brushes (sizes must be different);
roller;
sandpaper.

The whole process includes the following steps:

Carrying out preparatory work.
Elimination of defects (rust, dirt, grease).
Applying a primer.
Coloring gates (garage and "home").

How to properly prepare the surface

How beautiful to paint the gate? First you need to prepare the coating.

All steps look like this:

Coating cleaning. If there is old paint on it, it must be carefully removed. This can be done "armed" with a metal brush. You can also use a grinder. It must be equipped with a special nozzle so as not to damage the surface. You can also use a building hair dryer. It is advisable not to resort to a special wash due to its strong toxicity. There is a possibility of being poisoned by its vapors.

For sanding, fine-grained sandpaper is used.

Grinding. Fine-grained sandpaper is used. This ensures maximum adhesion of the coated enamel.
Degreasing. A strong solvent is used. When processing the gate, you need to cover the entire surface. Special attention should be given to hard-to-reach areas.
Padding.
Washing. Removes dust and dirt that has accumulated as a result of the operation of the gate, as well as after the previous stages. The use of a garden hose, special detergent and a sponge is recommended.

How the primer is applied

Before painting the gates of the house and garage, a primer must be applied. The steps are:

"Arm" with a roller or brush. Remove remaining flaws from the surface with a rust converter. When this composition dries, a whitish coating forms. It should be removed with a rag.
Using masking tape, carefully glue all the elements that are not intended for exposure to the primer. Sheds are pasted over, as well as a handle.
"Arm" with a comfortable brush. To speed up the process, it is recommended to use a roller. Apply a primer - first one layer, then two more. Each layer is applied only when the previous one is completely dry.

Important! The primer is applied at least 10 hours after washing the surface. This time is required for complete evaporation of moisture.

How the surface is painted

Painting the gate with your own hands involves the use of a wide paint brush. You can also use a roller or spray gun. If the second option is chosen, it is recommended to protect adjacent surfaces from paint as much as possible.

The stages of work look like this:

Painting starts at the top. You need to move down carefully, gradually, slowly. This is necessary in order to avoid the occurrence of smudges.
Parallel layers should overlap each other. This will help to achieve the uniformity of the enamel after it dries. There will be no abrupt transitions.
After painting the surface, you should take a few steps back and carefully inspect the gate. It is better to do this after the enamel has dried. So you can see the missing sections and correct the error in a timely manner.
Particular emphasis should be placed on staining the corners and edges. These are quite difficult areas, so you should use a contour brush to process them.
After a day, brush through the gate again. The optimal number of layers is 3. Depending on the weather conditions, this will help increase the service life of the product by 6-8 years.
The optimum temperature for work is 10-20 degrees Celsius. If this requirement is not met, problems may arise with the drying of the enamel. Smudges and blisters may also form. The color may become uneven.

Painting gates at home with hammer or blacksmith paint involves the use of:

brushes with natural bristles;
short pile roller;
aerosol can;
airless sprayer.

Each of these tools has its own benefits.

Working with blacksmith material

The gate is painted like this:

If a brush is used, then 2 layers of material are applied first. They must be thick enough. It is necessary to carefully paint over the grooves and edges. This will help protect the gate from the spread of corrosion.
Roller work involves applying enamel in 2-3 layers. When the paint is applied for the first time, it needs to be thinned a little. For 9-10 parts of enamel, 1 part of any suitable solvent will be required. Then dilute the material is not required. Coloring begins with the study of corners and other areas with complex relief. Then you should move on to flat zones.
The aerosol is applied in 3-4 layers. They should be as thin as possible. Shake the bottle thoroughly before starting work. According to experienced craftsmen, this should be done within 3 minutes. The optimal distance for spraying paint is 150-200 mm. When the first layer dries, you will need to wait up to 3 minutes, then apply the next layers. The interval between them is 15-20 minutes.
If the paint is applied with a sprayer, it should be diluted with a solvent (proportions - 9 to 1). To obtain a homogeneous emulsion, the sprayer is well shaken.

Important! Most of all blacksmith's enamel "loves" the roller. They are well worked out absolutely everything, even the most problematic areas.

Conclusion

Paint fading will be less noticeable if lighter tones are used. If a darker shade has already been chosen, then in order for the gate to always have a “marketable” appearance, it is necessary to update them at least 2 times a year.

You can also install roller blinds - this helps to increase the wear resistance of the paint.

More information can be obtained from the video in this article:

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your own ...

New Articles

New comments

S.A.

Grade

Svetlana

Grade

Sergei

Why is it necessary to paint metal products and why do it at all? After all, it is a strong and hard-wearing material, and, for example, new metal garage doors are already painted. Is it just for beauty? Answering these questions is required to understand the actions to preserve metal products from corrosion.

Identification of the need for staining

metal gate country house, both garage and entrance are used daily, which is necessarily reflected in their canvas. However, they are installed outdoors. And on the metal structure located under open sky, temperature and humidity affect, eventually leading to corrosion of the product.

Rusted canvas gives the gate an unaesthetic appearance. This indicates not only the influence of natural factors, but also the improper preparation of the surface for painting. Therefore, it is necessary to pay attention to the process of preparing and painting metal products.

The need for painting is determined visually. This is not only clearly visible rust, but also the presence of internal corrosion, which leads to the appearance of small bubbles on the surface and further flaking, as well as peeling of the paint. If the preparatory work is done with high quality, then the next painting will not be required soon. It will only be necessary to periodically tint, or rather, refresh.

Paint selection

When choosing a material for outdoor work, certain requirements should be followed. They are dictated by the need for a long period of preservation of the surface from external factors. Here are the properties that the selected paint and varnish products should have:

good adhesion to the surface (adhesion);
sufficient elasticity, since expansion and contraction are the response of metal products to temperature effects;
the presence of water-repellent properties;
possibility of use in a wide range of temperatures;
resistance to chemically active substances;
strength under mechanical stress.

When choosing a paint and varnish product, it is necessary to take into account all the points of this list. After all iron gate used in various conditions. They may be affected not only by temperature and moisture, but also by mechanical stress or accidental ingress of oils and other chemical substances.

Knowing the requirements for paints for outdoor work, you can proceed directly to the choice. On sale there is a wide variety of paints and varnishes, the cost of which varies widely.

The most used types are as follows:

Nitro paint is quick-drying, which makes it easy to use. However, it peels off, and then, within six months, it peels off. Not recommended for use over other types of paints and varnishes.
Oil. Allows you to cover the product with a thick layer, but dries for a long time. Depending on the company that produces the goods, the drying process can last from a day to a week. For such a long time, small particles stick to the canvas, which reduces the attractiveness of this type of paint.
Alkyd enamel - universal, has good resistance to abrasion. There is a wide range of colors and a choice of textures - the usual glossy or matte. The durability of the painted surface is from 3 to 7 years. Drying time - within a day.
Acrylic enamel - well withstands sudden temperature changes and exposure to moisture, as well as aggressive substances, is elastic. Has been widely used.
Silicone enamel - has good adhesion, is durable and elastic. Particularly distinguished by heat resistance, anti-corrosion properties and low consumption during painting.

Choosing a coloring tool

This is an important moment in the production of paint work. The right approach is needed to preparatory work, and to the coloring of the gate. Which tool to choose is an independent process, depending on specific conditions and circumstances. An important factor here is the professional level of the worker.

Roller, brush and spray gun - the tool you need to do the job. Paint only with a brush, ineffective due to the appearance of streaks on working surface. The work will have to be done again. It is impossible to paint with a roller in corners and narrow places. Therefore, their combined use is recommended.

The spray gun can only be used by a person who has the skills to work with it. It requires not only a timely change in spray pressure, but also the knowledge of what viscosity the paint must have in order to paint the gate. Lack of skills will lead to strong streaks over the entire painted area.

Preparatory work

Preparation for painting the gate must be carried out in strict sequence. It is necessary to perform the following work steps:

Washing or cleaning from dirt. The removal of contaminants is carried out, as well as the washing off of other substances adhering to the canvas. The most thorough work can be done using a hose. Pay special attention to corners and hard-to-reach places.
Surface cleaning. At this stage, it is necessary to remove peeling paint from the canvas. If the layer of the previous coating is large, then it is necessary to remove the entire thickness of the old stains. Works can be carried out both with a brush for metal and with a building hair dryer. It is possible to use a grinder or a drill with a special nozzle - a “brush”.
Grinding. It is produced with fine-grained sandpaper, regardless of the way the work is done - manually or using a drill that has a special nozzle. The mechanized method speeds up the work. However, without using manual grinding indispensable in hard-to-reach places Oh.
Degreasing. It is carried out with a solvent after cleaning and grinding. It is important to process the entire surface without gaps, not forgetting about hard-to-reach areas. The quality of the coupling of further coatings with metal depends on this.

Of course, changes and additions to the order of work are possible. Some gate owners wash after stripping and grinding, using detergents. This allows you to save on degreasing agents. But it should be remembered that these works must be carried out very carefully, and detergents cannot replace the solvent.

Carrying out painting work

You can paint the most evenly with a spray gun. The work is done quickly and efficiently, with coloring of all hard-to-reach places. You should be careful not to get small drops of paint into the respiratory tract, which fly in the form of a suspension in the surrounding space when working with such a tool.

The most common way to paint is to use a roller for large areas and a brush for hard to reach areas. It is necessary to carry out painting work from above, gradually falling down. Apply paint in parallel lines that overlap by a few centimeters.

After painting is completed, it is required to evaluate the integrity of the work. To do this, move back a few meters to identify gaps and other defects. Paint over the found areas with a brush.

If the color of the paint after drying turned out to be dull, then a second layer is required. Work is performed in the same sequence - from top to bottom. It is possible to apply several layers to achieve a bright color of the painted surface.

How to paint the gate if you ordered an unfinished structure from the manufacturer or decided to renew the corroded and peeling leaves damaged by corrosion? In the first case, everything is simple. It is enough to remove dust and pre-apply a layer of primer.

Photo No. 1: the procedure for painting the gate with a spray gun

We will talk in more detail about the re-staining of metal doors. From the article you will learn:

how to clean and prime the surface;
pick up paint;
apply a pattern to the gate by airbrushing.

Preparatory work

As we have already said, you need to start work by cleaning the surface from contamination. Choose a method based on the state of the material and budget. Unfortunately, if the metal is rusted to holes, no measures will save it. You will have to completely replace the sashes, this is an excellent reason to buy sliding gates - comfortable, modern, practical.

Surface cleaning

Since the finish coat will lie evenly only on a clean, fat-free surface, you will need to first remove the traces:

old paint;
oils and rust;
dirt and grease.

Budget cleaning method

To inexpensively remove old paint and dirt, you will need:

conventional spray gun;
metal brush;
sandpaper No. 60;
white spirit or gasoline;
rag.

You will spend 8-12 hours manually cleaning the sashes. Advantage - in the minimum expenses. The procedure is as follows.

Wash the gate with a stiff brush. Let the metal dry.
Remove old peeling paint with a wire brush.
Sand the unevenness of the remaining coating with sandpaper.
Degrease the surface with gasoline or white spirit.

Important! It is required to clean from rust and traces of old paint not only the sash, but also all fasteners and locking elements, as well as the frame.

Mechanized cleaning of metal from rust

You can also paint iron gates after a simpler, mechanized cleaning method. You will need one of the following tools to work.

Photo No. 2: metal brushes are used to mechanically clean old paint

Screwdriver with brush head. Easily copes with the task of removing old paint and traces of corrosion. The downside of the tool is that it runs on battery power. The screwdriver is quickly discharged, you will have to wait until the next start.
Grinder machine. Great alternative to sandpaper. The cost of such a tool is small - from 2000 rubles. The equipment is mains operated.
Bulgarian with a metal brush. Brass nozzles in the form of brushes are suitable for removing old paint. If we are talking about heavy dirt, pick up a brush with interwoven threads. Work with gloves and a mask.
Sandblasting. most expensive and difficult option cleaning. To remove dirt and traces of the old coating, the gate is removed from the hinges. If you apply a layer of paint according to the technology on a previously cleaned surface, it will last up to 6 years.

Chemical cleaning

Usually separate chemical treatment do not use. And really to do beautiful gate for a summer residence or a country house, it is better to play it safe and remove a layer of old paint before exposure to the sash with a reagent. So you will achieve maximum adhesion of paint to metal.

The ideal composition for removing rust is Hammerite paint and its analogues. Before applying, degrease the surface with white spirit and wash the sashes with acetone. Checking whether the metal is well degreased is simple: attach thin paper to the sash. If the fat spot does not appear on the sheet, proceed to staining.

Rust neutralizer

Now we will describe how to use a chemical wash before finishing the product.

Photo No. 3: rust neutralizer "Ferum-3" (Ukraine)

Apply the reagent to the surface cleaned with a wire brush. Use a wash with a gel-like consistency - it has the best covering ability.
Cover the sashes with plastic wrap - the resulting greenhouse effect will speed up the process of paint removal.
Wait half an hour and remove the old coating with a spatula. Reuse the reagent if necessary.

The choice of paint and primer for the gate

Now we will tell you which primer is better to use and what paint to paint the gate with. It is important that the finish coat meets the following requirements:

good covering ability;
enhanced adhesion to metal;
the absence of components that oxidize iron;
high moisture resistance;
high rate elasticity;
strength to mechanical stress.

Several types of paints for metal on the market meet these requirements.

Silicone enamel. Differs in high strength properties and elasticity. Moisture resistant. Adheres well to metal. All silicon-based organic enamels have anti-corrosion properties.
Alkyd enamel. Elastic and resistant. Suitable for exterior finish. Supplied in a wide range of colors.
Hammer paint. It is convenient because the coating does not need to be cleaned and primed before application. Provides excellent water and dirt repellency. It is applied from a spray gun under pressure.
Acrylic enamel. With its help, you can beautifully paint the gate of any type - swing, sectional, retractable. Withstands large temperature fluctuations, is not afraid of exposure to moisture and chemicals, and is resistant to atmospheric phenomena.

Popular paint brands

Now consider the most popular brands coloring compositions for metal.

Metal primer

As you remember, before applying the paint, you will need another layer of primer, which will protect the surface from corrosion and provide better adhesion of the finish coating to the metal. To work you can use:

ship minium;
silver coin;
phosphating primer VL-02;
minium metal;
primer for metal GF-021.

Photo #6: 3 in 1 metal primer

Use a sprayer to apply primer evenly. After that, you can proceed to finishing.

Color selection

Since everyone has different tastes, the shade of the future gate depends only on the preferences of the owner of the garage. The most popular are green, burgundy, brick and blue colors. For ease of choice, we place a palette of shades.

Photo No. 7: a palette of paints for metal

Staining tools

It is better to paint the gate using:

spray gun - allows you to apply the coating in an even layer, without streaks;
roller - reduces the time of work, but leaves strips that have to be rolled several times;
brushes - increases paint consumption, complicates the procedure.

Sequence of work

We paint the metal gates sequentially from top to bottom, observing the following recommendations:

cover surfaces that do not need to be painted with masking tape or tape;
overlap one layer with another to hide transitions;
wait for the layer to dry and paint over the dotted missing areas;
paint over the hinges, grooves and latches with a thin brush;
apply the second coat after the first one is completely dry (recommended time is indicated on the paint package).

Important! Do not apply more paint than necessary. A thick layer reduces the strength properties of the material. The optimal number of layers is 2.

Temperature regime

Image No. 1: properties of enamels and varnishes

What happens if you ignore temperature advice? In 8 cases out of 10:

the paint will swell;
the color will turn out dull, with transitions;
there will be streaks and influxes.

How beautiful to paint the gate?

Beautifully paint the gate allows the method of airbrushing. To work, you need an airbrush - a device similar to a spray gun, but more functional.

Photo #8: This is what an airbrush looks like

Before drawing a picture, stock up on a sketch and paints. Where can I find a sketch? You can pick up an image on the Internet or design it yourself.

Sequence of work.

Transfer the contours of the future image according to the sketch. To do this, use paper templates.
To convey the depth of the picture, alternate light and dark shades of colors.
Work out the small details.
Cover the drawing with varnish to add shine and realism.

Examples of work performed by the airbrush method are presented below. Such drawings can be applied to retractable, swing and sectional garage doors.

Photo #9: Sports car on the garage door (airbrush)

Photo #10: sea waves on the garage door (airbrushing)

No artistic talent? Here is an option that is available to everyone, regardless of skill level.

Photo #11: Canadian flag on the garage door

For work, a simple spray gun and a paper stencil were used.

Painting the garage door is a necessary measure aimed at protecting the material from exposure environment and enhance its decorative properties. Before painting garage doors, you should find a suitable material for this purpose, so we want to tell you what paint to paint garage doors with and how to do it yourself.

Painting metal gates

Purpose and features

Garage doors are painted to protect the metal from which these doors are made from exposure to precipitation, moisture and other destructive environmental factors. In addition, painted gates look much better and fit into the overall architectural picture than raw steel shutters.

However, garage door paint must meet certain requirements, which are dictated by such features of the operation of the workpieces:

The metal has a special surface structure, on which not all coatings are capable of holding. The material with which you plan to process a metal part must have good adhesion to steel;
The composition of the coating should not contain chemicals that can oxidize iron or enter into other reactions with it, since in this case the layer will be swollen with evolving gases and peel off;
The material must be absolutely waterproof and moisture resistant, since water is the main enemy of steel products. The gates will be constantly exposed to various kinds of precipitation, carrying water in all its states of aggregation;
Metal products are characterized by a high coefficient of thermal expansion, so the finishing layer must be sufficiently elastic so as not to crack during changes in the geometry of the part. Considering temperature conditions where garage doors are used, this requirement becomes especially important;
Garages, as a rule, are not heated, so the coating must be designed for operation in a wide thermal range - from severe frost to peak values \u200b\u200bof surface heating by the summer sun;
The coating will be exposed to oils, gasoline, solvents and other aggressive chemical compounds, so it must be resistant to such substances;
Frequent mechanical impacts on the gate are possible: impacts, scratches, friction and bends. The material must be durable and resistant to wear.

Moisture and frost can reach the most hidden areas.

Important! As you can see, our part will be operated in difficult conditions, close to production. Therefore, its finish must meet these conditions in full, and better - with a margin.

Material selection

The construction market is full of all kinds of compositions for metal processing. But how to choose the right one among them? To do this, it is necessary to determine which composition most closely matches the requirements that we listed in the previous chapter.

So, we need, sufficiently elastic and durable, with good adhesion to steel, resistant to petroleum products and solvents and completely waterproof and frost-resistant.

Several types of paints fit these requirements:

Silicone enamel. This composition is characterized by good strength and elasticity, it serves for a long time and is not afraid of moisture. Adhesion with steel surfaces is excellent, the composition fits well and adheres well to the base, in addition, it is distinguished by high anti-corrosion qualities, which is especially important in our case;
Alkyd enamel. This type of coating is characterized by increased elasticity, abrasion resistance, weather resistance, suitability for. The material perfectly adheres to the surface and serves for a long time, is not afraid of direct contact with water and detergents, feels good in the presence of oil or gasoline, and also differs bright color and a wide palette of shades;
acrylic enamel. The most progressive and modern paint, which is not afraid of temperature changes, heat, moisture, aggressive environments and atmospheric phenomena. The high price of the material is offset by its durability and excellent decorative, protective and operational qualities.

Important! Not to be used on gates. oil paints, since they do not adhere well to the surface and are practically incapable of stretching, therefore they quickly crack and fall off.

If your gate is exposed to direct sunlight and gets very hot, use silicone enamel, as this material is able to withstand high temperatures without changing color and structure. Maximum heating - up to 600 degrees.

Acrylic enamel will look the most beautiful and solid, in addition, it is completely harmless and odorless. It is easy to work with, but its cost may surprise you unpleasantly.

Alkyd enamels allow you to create a durable protective coating that is not much inferior to acrylic in terms of beauty and choice of colors, but at the same time much cheaper. The film is strong and durable, over time, the color does not lose its attractiveness.

Important! If you can't decide what to paint your garage door with, buy silicone enamel or alkyd-urethane paint, these are the most reliable ways to protect metal.

Also for processing products made of iron and its derivatives, fire-retardant paints for metal Polistil are used, and sometimes electrically conductive paint zinga finds its application. These products are suitable for the most extreme and special operating conditions and are highly resistant.

Work progress

Now about how to paint the gate in the garage.

To make it more convenient, this will not be just a story, but a step-by-step instruction:

We remove from the surface of the gate old paint by chemical washing or mechanically. It is convenient to use a grinder with a metal brush, a building hair dryer or a blowtorch can also help;

We degrease the material with a solvent and apply two or three layers of soil to it. Such care will lead to an extension of the service life of the coating and to an increase in its resistance;

After the soil has dried, we wash off dust and dirt from the surface with water. detergent, and after drying, apply a layer of paint with a brush, roller or spray. We make the layer thin, without smudges and sagging;

After the first layer has completely dried, apply the second and third in the same way.

Important! When working with solvents and enamels based on them, be sure to wear goggles, gloves and a respirator.

Output

You can paint garage doors with various means, including acrylic, alkyd or organosilicon compounds (