Installing a shower enclosure: step-by-step instructions for independent work. How to assemble and install a shower cabin Installation of a shower screen with your own hands

It is better to entrust such a difficult job as installing a shower enclosure with a tray to specialists. The apparent simplicity of the process actually hides a lot of "pitfalls". But if you are a jack of all trades and have already done plumbing work, moreover, successfully, then you can try your hand at installing a shower enclosure.

What should be taken into account?

Let's make a reservation right away that the arrangement of a shower enclosure without using a pallet and with it requires completely different tools, knowledge and approach to work. We will discuss only one option in order to thoroughly understand it, namely, how to install a shower enclosure with a tray.

There are a number of simple and, meanwhile, important rules for the success of this work:

Regardless of the manufacturer and cost of the shower enclosure, all joints must be processed after the assembly of the enclosure. silicone sealant.

To assemble the shower enclosure, use only special sealant - moisture resistant. Mold does not appear on it, it adheres well to glass and profiles, and does not peel off. As a rule, such characteristics are reflected in the price, and you will not find this among cheap sealants. Masters praise sealants for aquariums. They adhere optimally to glass surfaces.

Siphon and all pipe connections are better to buy initially good quality, as the shower tray is low and repair work the connections below it are difficult.

Be very careful when defining the top and bottom of doors and glass walls. At first glance, they are very similar. But it is precisely the error in the installation of the glass parts (the top and bottom are mixed up or the inside with the outside) that often causes the doors to close insufficiently tightly or make an unpleasant sound.

Tempered or, as it is also called, tempered glass, which is used for the production of shower enclosures, curtains and doors, is quite durable. From a blow with a palm and even a fist, it may not move. But there is a nuance. It has points of internal stress of the material. There are few of them. But a sharp hit with something sharp exactly at this point is enough, and the glass will be covered with a million cracks. Such glass, in particular, does not like to hit the end of the concrete floor. With such an impact, the glass sheet may not break immediately, but a microcrack is formed on it, invisible to the eye, which will sooner or later destroy the surface. Moreover, this can happen a few days or even weeks after installation, unexpectedly and for no apparent reason, as it seems. Therefore, you should be careful.

Putting together a shower enclosure

However, it is better to see once than hear a hundred times. Therefore, we suggest that you go through the entire installation process step by step and learn how to assemble a shower enclosure with a low tray. Of course, there are many nuances in the design of shower enclosures for equipping a corner of various shapes, sizes and different manufacturers - you won’t take everything into account! However, there are general tips that will be relevant for everyone.

As an example, we will take one of the most popular shower enclosures in the Aquanet range from the Alfa collection, rectangular in size 150x80 (cm). However, the sequence of work is similar for a shower enclosure with a length of 140 or 120 cm, the design of which includes one sliding door that has free movement and is mounted on rollers.

Step 1. Prepare the siphon and drain system for installation.

Step 2 Attach the legs to the pallet. Install a siphon on the pallet and connect the drain system of the pallet to the sewer. Use the adjustable feet to level the tray.

Step 3 Treat the joints of the pallet with the wall with sealant or close plastic border to prevent water from getting under the tray.

IMPORTANT! In the process of assembling the corner before installing shower enclosures on installed pallet pause work and check the drain connection for leaks. To do this, you just need to pour a little water into the pan and see if the joints remain dry after draining, and if there is a puddle under the pan. It is better to identify and solve this problem immediately, and not after the entire shower enclosure is fully assembled.

Step 4 Check that you have all the necessary mounting hardware for assembling the shower enclosure.

Step 5 Take fixed glasses (solid, without holes) and install plastic seals on three sides, which will be inserted into the profiles. Next, put the clamps, decorative caps, install the glass.

Step 6 Connect the rack to the top bar. Please note that horizontal profiles have restrictive rollers, and vertical profiles have a groove for glass on one side, and on the other side a groove for a wall profile. Connect 1 horizontal and 1 vertical profiles with the letter "G", fasten them with two self-tapping screws at the end.

Step 7 Connect the bottom rails together.

Step 8 Connect the rails to the wall profile.

Step 9 Place the assembled framed glass railing on the pallet.

Step 10 Temporarily install a wall profile on the glass, press the structure against the wall, level it with a level and mark the installation location of the U-shaped vertical wall profile, and then attach them to the wall using self-tapping screws.

Step 11 Fill the places of contact between the profiles and the wall with sealant, applying it to a dry and clean surface. It is advisable to pre-degrease the sealing points.

Step 12 Next, proceed to the assembly of the sliding door. To do this, install the eccentric type guide rollers on the sliding door. Be sure to loosen the cams on the rollers before installation. Please note that two single rollers are installed on the bottom of the door. On the top of the door are two double rollers.

IMPORTANT! When installing doors, it is important to hook the rollers on all guides and adjust them correctly. Mistakes are often made here, as a result of which the doors warp, gaps form, they move along the guides with effort or jam. As a rule, in this case, it is not a matter of low-quality components, but of poor assembly. With proper assembly and adjustment, the doors move smoothly and without jerks.

Step 13 Install the door stops, focusing on the pictures: the upper edge on the right (in the left picture), the door stop in the left extreme lower part (the picture on the right).

Step 14 Now you can hang the door in the grooves.

Step 15 Lock the lower rollers onto the rails until they click into place.

Step 16 Adjust the position of the door with a screwdriver using a level.

Step 17 Insert the magnetic seal as well as the seals on the doors.

Step 18 Attach the handle to the door.

IMPORTANT! Carry out a crash test by directing water jets to different areas of the assembled shower enclosure in turn, in order to identify the lack of sealing in time, and not after flooding the neighbors. If you notice leakage, then repeat the sealing of the doubtful area.

Once the sealant has hardened, the shower enclosure can be used. This usually takes a day.

In most homes, in the bathrooms, you can find a bathtub, over which a spacer bar is installed. A curtain hangs on it, designed to protect the space of the room from splashes. Many are wondering: is it possible to get rid of this not very attractive piece of furniture and how can it be replaced?

The answer is quite simple: there are currently special protective shower screens. Most often, their design is made of an aluminum profile, on which tempered glass or a polymer sheet is attached.

Benefits of using a screen

By installing a screen, you can achieve the following positive points:

The screen perfectly protects the space of the room from splashing water while taking a shower.
The design features not only provide splash protection, but also prevent a single drop of water from seeping onto the floor.
Protecting the room from moisture, the screen becomes a protection against the appearance of fungus due to excessive dampness.
The vast majority of screens are made transparent, this allows you not to clutter up the space visually. If desired, you can choose a model that will partially or completely hide a person at the time when he takes water procedures.
The surfaces of the product are made smooth enough so that water flows well over them, does not linger in the form of drops, this allows you to achieve minimal contamination of the shower screen. Sometimes the panels are covered with a special water-repellent coating, which further contributes to the active flow of water drops from them.
Maintenance of the structure is quite simple: only wiping with a damp cloth is required. If heavily soiled, window cleaners can be used.
The design is made in such a way as to provide unhindered access to the bath. Installing a shower screen does not create any inconvenience in the process of using the bathroom.
Most modern models have an aesthetic appearance, which not only does not violate the interior of the bathroom, but also decorates it.

Design of shower screens are divided into two types:

frameless;
frame.

Let's consider each modification in more detail.

Frameless shower screens

Frameless shower screens are most often made of glass. They have a large thickness to provide the necessary rigidity of the structure. The sheet of glass in this case has a thickness of up to 8 mm.

Such screens are usually used in cases where strong splashing of water is not expected. The design is a kind of screen and cannot guarantee complete protection against water ingress into the gaps remaining between the screen and the wall or side of the bath.

Screen canvas can be fixed to the wall, but more often it is equipped with a swivel mechanism that allows the sash to open for easy access to the bath.

Among the advantages of such models, one can note the simplicity of the design, which has a positive effect on reliability. In addition, due to the ease of execution, frameless models are much cheaper.

Framed shower screens

Based on the name, such screens are a frame, most often made of aluminum, in which sheets of glass or polycarbonate are installed. The thickness of the panels is usually in the order of 4 mm. The framework can contain both one and several frames.

It is these designs that are most interesting and are in great demand among buyers. They also have their own varieties and may differ in the way the doors open.

Classification of screens according to the method of opening

There are two main ways of opening, according to which the screens are divided into:

swing;
sliding.

Both design options are quite popular. To make a choice, you should study the nuances of each modification in more detail.

Hinged shower screens

The hinged design is simpler, it is similar to the arrangement of most hinged doors. This determines The main disadvantage of such models: The sashes take up too much space when opened. This is especially noticeable in double-leaf models. However, if there is enough space, the swing option can be quite convenient and functional.

The swing version is less demanding on accuracy in handling, but if this point is not fundamental, you can choose between the swing and sliding design according to your taste.

Sliding shower screens

The movement of the movable sash is carried out using a roller mechanism. The rollers move along special guides. Magnetic latches are designed to keep the movable canvas closed.

Sliding design requires careful handling. It is worth noting that both the rollers themselves and their fastenings are a rather important component of the entire mechanism. They must be made of durable material. Their device must be thought out to ensure the smooth running of the movable sash.

Attention should be paid to the requirements for the installation of sliding screens. Fastening aluminum profiles to the supporting surfaces should be done using sufficiently powerful dowels and screws or self-tapping screws. If you use dowels of small diameter and length, over time, the supporting elements may become loose, which will impair the smoothness and ease of movement of the valves or, in the worst case, lead to the destruction of the entire structure.

Shower Screen Materials

Shower screen panels can be produced of two various kinds materials:

polycarbonate;
glass.

Each of them has its own characteristics.

Polycarbonate

Plastic structures have the following advantages:

Such models are more accessible due to the relatively low cost.
Installation of the structure is quite simple. Dismantling, if necessary, is carried out quite quickly.
Polycarbonate boasts an unrivaled range of colors that can be matched to any interior style.

However, there are also obvious cons of this material:

The material is more prone to streaks than glass.
Possible clouding of the surface, decrease in decorative functions.
Dirt accumulates more actively on the surface of the panels, which can contribute to the reproduction of various microorganisms.

Glass

Among the advantages of glass models are the following:

Glass is easy to clean. In addition, it is often processed in production with a special composition, due to which a minimum amount of dirt and fingerprints remains on the surface, and they are removed without much effort.
The decorative characteristics of glass screens are higher. In addition to the fact that they already look spectacular, the decor does not suffer from time. The color cannot change, since the coloring pigment is in the thickness of the material. Drawing can be done various methods, each of which creates its own unique decorative effect.
The strength characteristics of tempered glass are at a high level. It is quite difficult to break such glass.

There are also disadvantages:

Glass models of screens are much more expensive than plastic ones.
In case of strong impact or excessive mechanical impact glass can be damaged and this can be dangerous. However, the tempering is designed in such a way that in case of breakage, the glass breaks into tiny pieces, which should minimize the possibility of injury.

Glasses can be made with various decorative effects:

transparent;
tinted various shades;
matte;
with an image.

Based on experience, you can highlight some points, which should not be forgotten when choosing a shower screen:

It is recommended to install a screen of such a height that there is a small gap between the structure and the ceiling. This is important for the natural ventilation of the space.
If the walls of the bathroom are not even enough or have a slope, you should make sure that adjustable fasteners are included in the structure.
If you plan to purchase a shower screen with matte panels or a pattern, additional lighting should be provided above the shower, as the walls will obscure the light from the main lamp.
The quality of workmanship of the constituent elements is of paramount importance for durability.
Be sure to find out the warranty period of operation in order to insure against unforeseen situations.
It is worth choosing products from well-known manufacturers in order to be sure of the quality of the purchased product. Currently available for sale a large number of models from foreign manufacturers. For those who prefer domestic products, Salut screens made in Russia are on sale. They are of acceptable quality, and their cost is significantly lower.

Screens with pallet

A few words should be said about shower screens with tray. The screen can be installed not only in the bathroom itself, but also in any other room. In this case, we can advise the purchase of a structure with a pallet. Pallets come in various overall dimensions, so you can choose the right model according to your own preferences or the available space. The depth of the pallets can vary, so it is always possible to choose the optimal one. Depending on the premises and preferences of the customer, pallets of various shapes can be selected:

square;
rectangular,
in the form of a sector of a circle;
semicircular.

On sale ready-made kits available screens with pallets, among which you can choose the one you like best.

Regardless of the model chosen, when installing a shower screen, not only does it become more convenient to use, the interior also wins. At present, the screen is no longer perceived as an element of luxury, but performs its utilitarian function, while remaining stylish element arrangement of the bathroom.

Taking a shower or bath in such a way that drops and splashes of water do not fly in all directions is almost impossible, therefore humidity and dampness often reign in the bathroom. As a result - mold and fungus, the cost of processing the bathroom or even a complete replacement of the finish. But in order to reduce the amount of moisture remaining in the room after hygiene procedures, it is enough just to install a structure there, which is called a bath screen, a partition or a protective screen.

In modern stores, they are sold in a large assortment, that is, it will not be difficult to choose a suitable screen, but before buying, it will be useful to learn about the features and characteristics of different products.

Ordinary curtains, which until recently were very popular with buyers, are gradually becoming a thing of the past. The only advantage is low cost, otherwise they are significantly inferior to screens. Benefits of bathroom screens include:

well protect the walls and floor of the room from water - literally not a single drop will seep through such a structure;
do not require special care and regular cleaning;
unlike ordinary curtains, they do not contribute to the development of pathogenic microorganisms and fungal spores;
a variety of designs, shapes and materials makes it possible to choose a screen that is best suited for the interior of a particular bathroom;
it is much more convenient to use screens than ordinary curtains, since they do not stick to the body and do not open from drafts;
constructions made of glass and plastic are much more durable and stronger than any oilcloth or rubberized fabric;
almost all screens are mounted very simply, so the installation can be easily handled by yourself.

Accordingly, any bathroom can be equipped with a screen, regardless of its interior. And in order to choose the right design, you need to know about the operational features and varieties of bathroom screens.

Types of screens for bathrooms

All protective partitions for bathrooms can be divided according to two main criteria: the method of opening doors, design features and material of manufacture.

bathroom screen

Door opening method

In this case, there are three options: screens with sliding and hinged doors, as well as accordion screens. Sliding designs are most in demand, as they are suitable for any bathrooms, including small ones, as well as for straight and semicircular baths, which are installed in most modern apartments and houses.

Finally, "accordions" are most often used in bathrooms equipped with round or oval baths. In principle, they can be installed in any room, but in conditions of limited space, they will still “eat up” part of the free space. Another significant drawback of "accordions" is that after a while, numerous places of attachment of structural elements to each other begin to wear out and break.

Design features

Based design features, protective partitions can be frame, frameless and combined.

Frame screens. Products consist of a carrier frame and several sections (usually from 2 to 6), and one of them is a sash that moves aside. The design is installed on the side racks and fixed to the sides of the bathtub by means of guides.
Frameless screens. Screens of this type also consist of several parts, but do not have a frame. Usually they are made of tempered glass with rounded corners: stationary sections of thick, movable - of thin.
Combined screens. They combine both of the above types of structures - most often one of the parts is only partially fixed to the profile, which makes it possible to open and close it.

Production material

Modern bathroom screens are made of glass or plastic (polycarbonate), each with its own advantages and disadvantages.

If we talk about the design of the screens, then there will be no problems with the choice. Designs can be completely transparent, tinted, matte or patterned, cover the bath partially or completely, creating the appearance of a shower cabin.

What should be considered when choosing a screen?

To choose the right screen for the bathroom, you should consider a number of important nuances and features different types structures.

One of the most important aspects reliability and durability of the screen is correct installation, which does not require special skills or knowledge, but requires accuracy, accuracy and careful observance of the instructions.

Step-by-step instructions for installing a sliding glass screen

The installation of sliding screens may have some distinctive features, but in general it is carried out according to the same principle. First you need to prepare the necessary tools for work:

fasteners (bolts, dowels);
drill or perforator;
silicone sealant and a special gun;
screwdriver;
building level;
roulette;
masking tape.

The set of a sliding partition usually includes guide profiles, a rail that fixes the structure, glass sections, fittings, special gaskets that protect the elements from moisture.

Step 1. First you need to fix the profile that fixes the screen on the wall. You need to remove the rail from it, adjust its position using a level and mark the installation points on the surface.

Step 2 Drill holes at the marked points. If the walls in the bathroom are tiled, it is better to use special tile drills. Masking tape will prevent the drill bit from sliding along the surface of the tile. To make the fixation as strong as possible, it is recommended to make more than two holes into which you will need to insert the dowels.

Step 3 Apply silicone sealant to the back of the profile and fix it to the wall with screws.

Step 4 Fix the glass on the installed profile, tighten the fasteners, but not too tightly so as not to block the glass panel completely.

Step 5 The remaining gap is necessary to install the seal - it is put on the bottom of the glass, after which the panel can be completely fixed by tightening the screws until it stops.

Step 6 Put special insulating caps on fasteners.

The gaps that remain between the screen elements and the wall should be filled with silicone sealant. It takes about a day to harden the composition, that is, during this period it is better not to use the bathroom.

Video - Installing a screen in the bathroom with your own hands

Step-by-step instructions for installing a plastic frame screen

Another common option for a bath screen is plastic structures on an aluminum frame. The assembly of such screens is also a fairly simple task - it will require the same tools as in the previous case, but the work algorithm looks different.

Step 1. Assemble the main part of the screen, that is, attach the fixed elements to the horizontal ones using special screws that usually come with the screen.

Step 2 sliding door insert into upper part frame profile, align it with the bottom and snap the bearing into place.

Step 3 In the walls, mark the places for attaching vertical guides, drill holes.

Step 4 Attach the vertical guides to the screen frame.

Step 5 All places where the structure will adjoin the walls must be treated with silicone sealant.

Step 6 Install the screen in place and fix it with fasteners, put on them special linings.

After the sealant dries, attach the handle to the screen, carefully cut the protective film around the perimeter and remove it.

Screen care

Caring for such structures is a simple process, but it requires compliance with a number of rules, since it depends appearance and service life of screens.

After hygiene procedures, it is advisable to leave the door open so that moisture does not accumulate behind the screen.
Glass products can be washed with any cleaning agents, and in the case of plastic, non-aggressive household chemicals without abrasive particles should be chosen, otherwise the surface will quickly become scratched and cloudy.
If a sliding screen is installed in the bathroom, its mechanism needs to be checked and lubricated from time to time.
Seals that protect the edges of structures from moisture should also be regularly inspected for mold and mildew, and replaced if necessary.

From the author: hello dear readers! V last years we began to pay more and more attention to the comfort of our home. Modern manufacturers have also caught this wave, so the market is flooded with various devices that are designed to make our life more convenient and comfortable. Especially global changes have affected bathrooms. Illuminated toilets with a radio, hot tubs and the like - could we have thought of something like that fifteen years ago?

Of course, a jacuzzi is still far from being found in every home. But showers are becoming more and more popular. They are convenient and do not take up much space (although the latter factor depends on the specific model). In addition, closed models have many interesting features. In them you can take a rain shower or enjoy aromatherapy, get a hydromassage treatment and benefit the body in other ways.

However, just this type of booths usually differs in impressive dimensions. Therefore, in small x more relevant open models. They take up very little space, and installing a shower enclosure yourself is a fairly simple matter. In today's article, we will analyze just this procedure.

What is the difference between a shower enclosure and a cubicle

The modern market offers many varieties of shower stalls, which, in general, are divided into two types: open and closed. The latter type is named so because such a model is closed on all sides: it has walls, a floor, a ceiling. In fact, this is a small separate room for taking water procedures.

As mentioned above, such cabins can have a variety of interesting features for massage, relaxation, and the like. In general, the equipment brings a considerable amount of comfort to the life of the owners, this is especially true for those who are very fond of water procedures.

Of course, it was not without its downsides. Closed cabins have the following disadvantages:

a complex installation procedure, especially in the case of the presence of those very additional functions. In principle, you can buy equipment already assembled and not bother with connecting each element. But it often happens that such a model, when assembled, simply does not fit through the bathroom door. As a rule, the matter still ends with the call of the master, who assembles the booth directly in the bathroom;
price. Plumbing is generally distinguished by considerable prices, and when it comes not just to water supply, but also to comfort, it can turn out to be completely unprofitable. Moreover, the more functions, the more expensive the model, which is natural. On the other hand, they usually serve for a long time, and they bring a lot of pleasure;
dimensions. The large dimensions mentioned in the first paragraph can be a critical factor when it comes to a typical bathroom in an ordinary apartment building. What can we say about the infamous combined bathrooms in Khrushchev, where it is generally difficult to turn around. This cabin just won't fit.

If all of the above disadvantages - especially the last one - are for you great importance, then this is where the shower corner will come to the rescue. It is easy to install, inexpensive, and most importantly, it takes much less space than closed models.

In fact, the main equipment of such equipment consists of a pallet and doors. The role of the side walls is played by the adjacent walls of itself. Thus, you get a corner in which the shower equipment is placed, a tray is mounted, and the whole thing is closed with a door and, in part, with panels.

Such a corner does not have a ceiling, so, of course, various “bells and whistles” like a tropical shower cannot be put here. But the production of work is greatly simplified. And in any case, such equipment will bring with it convenience and comfort, regardless of where it is located: even in a city apartment, even in a wooden house.

To make the installation procedure easy and trouble-free, we suggest reading the instructions below for installing a conventional shower enclosure with a do-it-yourself tray. Also attached to the article is a video, by watching which, you will further enrich the stock of knowledge. So let's get started.

Preparing for installation

The first thing to do is prepare the room.

Remove from it everything that can interfere with freedom of action. Of course, we are not talking about dismantling the toilet bowl and other fixed structures. But washing machine, for example, it is better to endure. Shower enclosure doors and panels are usually made of fiberglass. They are fragile, therefore, catching on something or dropping any element, you risk dooming yourself to re-acquisition of a broken structural part.
Invite a friend as an assistant. Despite all the ease, some installation steps are much easier to perform with two pairs of hands. It is both more reliable and safer.
Decide on a specific installation location. It is desirable that the drain hole in the pan and in the floor are located one above the other. In this case, it will be possible to connect them directly, thereby providing the most reliable and high-quality connection. If this is not possible, then you will have to use an additional hose. In principle, this option also has the right to life. But remember that the presence of additional adapters always reduces the reliability of the connection.
Level the floor where the installation will be. It is necessary that the pallet stands up perfectly, so use the building level when working. The best option in such cases, there are self-leveling floors, with which you can level a certain area. However, if the unevenness is not too strong, and the floor is already tiled, then there is no point in dismantling the tile. You can compensate for height differences by adjusting the legs of the pallet.

Installation procedure

The process of installing a shower enclosure always begins with the installation of a shower tray. To do this, you will need a wrench and a silicone-based waterproof sealant. And also, of course, the structural elements themselves: a pallet, a siphon and a drain hose included in the package.

In some models, the siphon, as such, is missing. In such cases, the hose itself takes over its function. As a rule, the kit then includes special devices that, when installed on the hose, give it a curved shape. The siphon bend is necessary in order to prevent the penetration unpleasant odors from sewer pipe into the room. Therefore, do not ignore these devices.

So, let's get started.

Turn the pan upside down and find the drain hole on it. Connect a siphon to this place.
Then fix the drain hose in the siphon. If you connected it directly to the drain hole in the pan, then install a bending device.
Attach an elbow to the opposite end of the hose - this part is also usually included in the package.
Install the elbow in the sewer hole located in the floor. You need to insert it in such a way that it goes completely there.
Now take a waterproof silicone sealant and consistently process all the places where the docking took place: the pallet and the siphon, the siphon and the hose, the hose and the pipe, the pipe and the sewer hole. Allow the sealant to dry after processing. This usually takes approximately two hours. Try not to touch the structural elements until the sealant has completely cured, so as not to violate the strength of the layer.
After the silicone sealant has completely cured, turn the pan upside down, put it in the right place and adjust the legs to the height. This is done using wrench. Turning the leg clockwise will make it shorter, counterclockwise will make it longer. Do not forget to regularly check the evenness with the help of the building level in the process.
We finished with the connection, now we attach the pallet to the wall with the help of fasteners and process the joints with silicone sealant. Again we wait two hours.

After the sealant has dried, you can proceed with the installation of the door and side panels. Unpack all structural elements. Try to be careful - we remind you that fiberglass can suddenly surprise you with its fragility.

Set the glass pieces aside for now, let's tackle the frame first. Assemble it from metal frames. After assembly, check the evenness of all ends, as well as the verticality of the corresponding elements. Only then fix with screws. Try not to tighten them too much, otherwise the frame may warp.

Now we hoist the collected metal structure on the pallet and check how smoothly everything is installed and converges. It is better to do this together, since the frame must be held on both sides.

The side frames have special holes for fasteners. It is necessary to mark these places on the wall. Then remove the frame and set it aside for now.

Drill the wall in the marked places. If it is tiled, then do it very carefully to avoid cracking the tile. You will need two diamond drill bits designed specifically for this finishing material.

First, make notches on the glaze of the tile, then drill through the entire thickness of the tile with a very thin drill, and then take a nozzle required diameter(corresponding to the dowels) and bring the holes to the desired depth and width. Attach dowels to them.

Put the frame back on the pallet and fix it to the wall with screws. Before doing this, coat the side frames with waterproof silicone sealant, this is done on the side that will adjoin the wall surface. After tightening the screws, remove excess sealant with a damp cloth, without waiting for it to dry.

Install the mounts, seals and rollers included in the kit on the frame. Next, mount the side panels, and then the door. Be sure to check the last one: open and close several times, while paying attention to the ease of sliding.

At the end, fasten door handle and treat all joints on the structure with sealant. Don't forget to remove any excess before it dries. After it hardens, the shower enclosure will be completely ready for use.

That's all, dear friends. As you can see, the installation procedure does not cause any difficulties. In addition, some prefer not to bother at all, but install only a tray, around which they hang a regular shower curtain.

Of course, this option looks less modern and stylish, but it also has the right to life. But in this case, you will have to take care of the quality of the floor first, since the curtain protects it from water much worse than the fiberglass construction. The choice is yours. Good luck!