How to make a cheap track in the country. DIY garden paths. DIY garden paths made of bricks

Making paths in the country can greatly affect the design of the site. Therefore, it is so important to pay attention to creating beautiful tracks.

Moreover, you can make an interesting path from various materials, for example, a brick path will look elegant, and a path made of round logs of natural wood will add mystery to the country design, a path made of river pebbles looks stylish, emphasizes original design and make it brighter track of plastic corks.

In addition, there are also ready-made removable panels that can be laid out every year to your liking.

country path project

Before you start laying the path, you need to create a terrain plan in which to designate all the buildings, garden plantings, flower beds and schematically designate the path. Ancillary objects, such as an irrigation system, must also be present on the drawing.

When creating a plan, it is necessary to take into account all the nuances, so you should be as comfortable as possible, getting to any place in the garden. In addition, you must take into account the fact that you need to walk around your territory in any weather conditions, and at any time of the year.

Now the drafted project must be applied directly to the site.

It will be easier to determine the width of the path and its direction if you apply markings directly on the site, which is especially important for a path made of paving slabs or bricks.

It is best to make markings with pegs, which you must first drive in, and then pull the rope over them. Also, for convenience, the side border of the track can be marked by sprinkling it with lime.

At the same time, it is important to take into account that the removal of the top layer of soil for laying the path should be wider than the path, because for reliability and durability it will need curbs made of such durable materials as concrete or stone.

Preparatory work

In order for the garden path to serve you faithfully for many years, thorough preparation will be required.

So, you need to take into account that the path should be with a slight slope, and in the area of \u200b\u200bthe slope you need to make a drainage trench. This is necessary in order to rainwater flowed from the path, and excess moisture would not damage the coating.

The thickness of the removed soil should be 15 ÷ 200 mm. After that, in order for the edges to remain even, it is necessary to install boards along the entire perimeter of the dug hole from the side of the sides.

Then a “pillow” is made for this, gravel is poured into the pit along with cement and everything is compacted and moistened. "Pillow" should have a thickness of 50-100 mm.

Types of garden paths

There are a lot of materials, thanks to which you can make an excellent country path.

Brick path. Such a path is reliable, durable and looks very elegant in appearance.

Wooden path. Such a path looks beautiful and even mysterious, the round timber, laid out in the form of an ornate path, resembles a fairy-tale path.

Stone path. Those who want to see a stylish and elegant garden path on their plots can try a mosaic version of river pebbles.

Cement track. This trail is durable and safe. To make it attractive, you can use special curly molds, thereby you can get the effect of a paved path.

garden path from plastic caps. Quite unusual, but at the same time bright option paths in the form of a mosaic of multi-colored caps from plastic bottles.

Availability a large number colors and the availability of material, allow you to create a path with a variety of patterns that will make the landscape of your site a real work of art.

Plastic track. This type of track can be quickly and easily installed and, if necessary, changed and even removed.

Thanks to the embossed surface plastic panels It is convenient to walk along the path, because it does not slip, even if it gets wet. A wide range of plastic products will allow you to choose a garden path of any color and shape.

In addition, with the help of plates, you can make a track of any shape and width. The plastic design allows you to organize a path in any part of the site.

The advantages of such a path include the fact that, due to its structure, it will not be on it, moisture accumulates, water will flow out through special holes.

Path from a garden parquet. This material is among the expensive ones, but its advantages outweigh the desire to save money.

So, “garden parquet” can be easily assembled and disassembled, wood treated with a special solution is not subject to moisture, fading, temperature changes, has strength and durability, and besides, such a path will look luxurious.

Photo of garden paths on the site

Friends, in this photo selection of ideas for country paths, I would like to introduce you to 35 economy options for their design. Budget does not mean bad, because even without a large amount of money on hand, you can create an ideal site and equally ideal paths and paths at your dacha.

We all know that old paving stones and bricks left over from buildings usually end up in a landfill. But if you clean them, bring them into proper shape, then with such materials you can pave all the paths in the country.

Simple stone pebbles, found in abundance in rivers, can also become the basis of your country economy path. We also add rectangular cement stepping slabs here and get a beautiful, gracefully curved path.

Returning to the bricks, I would like to note the red clay pre-revolutionary brick, it's just a treasure! And if you pave your paths with this material, then your path will last more than one century. Previously, brick was made to last.

Crushed stone mixed with cement rectangular stepping blocks can also serve as an excellent option.

The battle of bricks can also serve as the basis of the budget path, the main thing is to join it together beautifully, to make up some kind of common canvas.

Round step blocks can also look beautiful, which can be placed both as a passage through a pond and just on a lawn. The basis is cement and the remains of building materials.

Brick paving borders can be uneven, this will give your economy path a special decorative effect.

Sometimes you can buy a flagstone battle at a rather attractive price, and from it you can already make a real work of country art on a cement basis.

Having a grinder on hand, you can cut the old brick into squares and create a combination of rectangular and square blocks.

An original solution for the design of a path in a country house can be a brick border and a central bulk part made of crushed stone.

I deliberately do not show completely dubious options for economy tracks from boards, after all, there must be some kind of reasonableness. In areas where stone is found in abundance, even ideas such as in the photo above can be completed without any investment at all.

It is important to understand that even limestone can be found at an affordable price, if there is a mood.

Returning to the old red brick, it can be "extracted" from the ruins of former collective farms. Or it’s cheap to buy from stalkers - villagers who make a living by dismantling these buildings.

Well, river pebbles can be washed in any river or stream, not at a time, but there is a lot of such material on the rifts.

And I generally consider cement walking paths made of squares to be the most in a simple way creation of design in the country.

Even flagstone imitation is obtained from simple cement with some artistic taste.

Various dyes mixed into cement will give your economy track completeness and attractiveness.

If a large tree grew on your site, then for a couple of seasons you can make paths from the saw cuts of this tree. Nice and economical.

Combining fragments of limestone and small gravel, you can get just such a stylish country path.

Between the slabs, you can sow a lawn to add artistic appeal to your path.

In general, I would advise sowing all unoccupied territories in the summer cottage with a lawn. Cut grass is better than dirt, I think!

An interesting idea is the base of the path made of cement, and on top the decor is made of flat large pebbles.

In some cases, even impregnated boards can be a great option for an economical country track. The same applies to timber and old logs, only they will have to be processed first.

Summer residents with great enthusiasm began to ennoble their cherished six acres with comfortable houses, beautiful gazebos, barbecues. Well-trodden paths are increasingly giving way to specially made garden paths. In the article we will tell you how to make such paths from various materials (concrete, wood, brick, tile), consider inexpensive and highly budget options, we will demonstrate video and photo instructions.

layout

For small areas, you should not plan straight or intersecting paths at a 90 ° angle. This arrangement will visually reduce the already small area. If necessary, change the location of the beds for this. Connect all summer cottages and the most visited places.

Note! When planning, draw a network of future paths and exclude their intersection in the center of the site. Select the material for them in accordance with the general landscape.

Surface preparation

Take Special attention marking and preparing the soil for laying the selected material. List of required works:

With the help of pegs and strong twine, according to the plan, we mark the contours of the passages.
With a well-sharpened shovel, carefully remove the sod so that the edges are not torn. The resulting strip 10 cm deep is filled with sand.
The material chosen for construction is laid on a carefully compacted sand bed.

A rock

Paths made of stone are suitable for any garden landscape. The stone is selected so that one of its sides is as flat as possible.

The depth of the strip is 20 cm.
A sand cushion is arranged in the prepared strip, on which a stone is placed.
The seams are filled with ordinary sand and watered. If necessary (sand sags), the backfilling procedure is repeated until the aggregate is flush with the surface of the stone.

Log cuts

Wooden saw cuts are pre-prepared, at least 10 cm thick.
To protect against moisture, double impregnation with boiling drying oil is done.
A plastic film is laid on the sand cushion. It will protect wooden parts from rotting when in contact with the ground.
Prepared wooden elements are laid on a pillow, and the gaps between them are covered with sand, small gravel or gravel.

paving stones

Paving stones are an excellent durable material for creating garden paths. It is not afraid of temperature changes, moisture, withstands heavy loads. The sequence of laying paving stones is as follows:

dig a strip 20 cm deep;
lay the paving stones tightly on the sand cushion. Install curbs along the edges of the path;
paving stones can be laid different ways- oblique, with dressing, squares displaced relative to each other, etc.

Concrete

Reliable and durable concrete walkways. They are made like this:

Small stones are laid in the prepared trench in the first layer and filled with cement mortar. If you want to have a path that rises above the soil, mount the formwork and pour the solution into it.
Concrete can be decorated with mosaics, pieces of colored glass, natural beautiful stones. To do this, they must be pressed into a solution that has not yet solidified.

Note! The strength of concrete depends on the brand of cement.

Brick

Clinker brick paths look great on summer cottages. It is more expensive than red, but it is more reliable and durable. You can lay out a different regular pattern with a brick, this will make the track more expressive. Can be laid on mortar and sand cushion. If a brick is also used as a border, then the use of mortar is mandatory.

Gravel

If you need to make a long and winding path, and the budget is limited, make it out of gravel. This is the most affordable option for the price. Such a path will not differ in durability and the ability to withstand heavy loads, but is perfect for walking.

Note! Curbs are installed to limit the "spread" of gravel to the sides. Gravel paths will require additional care - removing weeds and periodically adding gravel.

Regardless of the path option chosen, the garden plot will undoubtedly change and become much more comfortable.

Photo

Creating garden paths with your own hands at low cost is a subject of tireless care and thought at the beginning of the arrangement of a new site. But it only seems that, once having arranged the transitions between important objects, you can calm down and no longer deal with this problem. Tracks tend to collapse under heavy use. There is also the problem of the impact of natural destructive conditions on them. The decision to make tracks with your own hands at low cost, that is, rationally and economically, with an unprofessional approach, easily turns into the need to update them after a short time. And the desire to create for real original project design can lead to the fact that the paths in the garden in a year will require a radical alteration.

Creating garden paths with your own hands at low cost is a subject of tireless care and thought at the beginning of the arrangement of a new site.

The choice of means, materials and methods for creating the final chord landscape design should be dictated not only and not so much by the low cost and not even the originality of the project, but by the need to create a truly durable and convenient means of transition.

Modern consumer-oriented industry has provided many options for those who, with some means, prefer to work on the site themselves. The use of such things can save time and solve several problems at once:

lay out beautiful paths in the country (decorative and designed in a certain style);
allow laying on any surface, carry it out with minimal time and improvised means;
simultaneously obtain a durable and aesthetic structure.

In order to be convinced of this, it is enough to visit any hypermarket building materials. Choice suitable material- a matter of personal preference and the state of his finances. The most popular materials are:

Garden parquet (specially treated wood). A rather expensive material that can also be used for terraces, arbors, verandas. It is easily and quickly assembled with the help of special tools and just as easily disassembled if necessary.
Plastic plates. The path of them is equipped easily and quickly; they are made of frost-resistant plastic, do not slip, fit both in length and in width. This coating can be easily and quickly dismantled for the winter, and in the spring to lay paths in any convenient location. Such installation and dismantling make it easy to correct errors in calculations when country paths are laid in an inconvenient place or unaccounted moves are trodden.
Plastic garden parquet. In appearance and resulting visual effects, it resembles wooden parquet, but much cheaper and more resistant to natural influences. The paths from it will last until you want to update them.
Finished concrete slabs small size. Concrete is a durable and strong material, and the use of a ready-made form has its own undeniable advantages: slabs can be laid without special preparation - directly on compacted dirt paths. True, their appearance will not be very aesthetic, but it is durable and functional.

Modern consumer-oriented industry has provided many options for those who, with some means, prefer to work on the site themselves.

When buying ready-made styling products, it is best to consult a specialist who will help you calculate the required amount, give some practical advice. But with the use of such functional modules, in a day or two, the tracks in the country house will be equipped with their own hands.

Gallery: garden paths (25 photos + video)

Difficult and laborious

For lovers of thorough and labor-intensive work, associated with measurements, kneading, pouring and waiting for the result, there are tracks for perfectionists.

You can make a path with your own hands from concrete by pouring, from paving slabs, from wooden rounds, from natural stone, from river flat pebbles.

It should be borne in mind that even for a simple concrete pour, you will need:

formwork;
shovel;
improvised concrete mixer;
cement;
sand;
stone chips or gravel;
covering material until the concrete is in place.

If the calculation of the necessary sand or crumbs is unsuccessful, such a path will begin to crumble over time and require additional refilling.

When buying ready-made styling products, it is best to consult a specialist who will help you calculate the required amount, give some practical advice

For laying paving slabs, you will have to prepare an even more impressive list of tools:

wooden mallet;
rubber mallet;
tiles;
Master OK;
cord;
rake and broom;
cement, sand and gravel;
manual rammer;
level;
channel;
hose.

Do-it-yourself path can be made of concrete by pouring

Paths from paving slabs are laid out for a long time and thoroughly:

Sod is cut.
Layers of sand and cement are poured.
Geotextiles are laid for strength.
The tile is cut at the end to fill in the places where unformatted pieces of space remain.
A curb is laid out to secure the path.

But it's worth it. Everything will be like best houses, that is, beautiful, stylish, decorative and fashionable. A few days spent on work will more than pay for itself with the appearance of the site. You won't be ashamed to post a photo. It is quite possible to make such paths in the country with your own hands.

The most difficult and original in choosing how to make a garden path are transitions from round river pebbles and wooden roundels. This is a real challenge for those who like to put thousands of puzzles on long winter evenings or collect ships in a bottle with tweezers. It will take several days to prepare the base, which would reliably withstand and fix such handmade masterpieces. And in order to lay out the paths with small pebbles (and even whimsical patterns), it will take even more time. If you wish, you can have fun with this all summer long, carefully selecting pebbles according to the pattern, format and shades. Only a path from plastic caps from bottles, the photo of which was posted by its proud author.

It will take a long time to collect the required number of covers, but the paths will be no worse than the mosaics in Rome.

Paths in the country from wooden round logs should be made, focusing on sawing material. The only thing to remember before deciding on such a laborious process is to carefully study the technology of wood processing. Just put wooden rounds on the ground - this means what you have to do on next year new track. The earth will sag, the tree will crack, the path will become unusable. Therefore, the process is expected to be long and complicated. These do-it-yourself tracks will be very convenient. Natural stone for paths is very reliable, fashionable and, with a certain skill, also decorative.

With limited means and quickly

The simplest solution is to leave the already trodden dirt paths. This comes with some inconvenience in rainy weather, but is extremely budget-friendly and delightful in its simplicity. A slightly more complicated process is to fill borders from improvised material or wooden slats and fill the space between them with stone chips or gravel. There are many tips on how to make paths in the country without spending much money and effort. For example, you can use waste building materials left after the construction country house. This is much cheaper than making a lawn path wide enough for a lawnmower to pass and maintaining it so that the grass grows exceptionally evenly.

(18 ratings, average: 4,25 out of 5)

Neatly laid sidewalk paths, gracefully intertwined between green spaces, are an essential attribute in any garden. If you want your summer cottage to be really complete and well-groomed, in no case should you neglect the paths. Fortunately, for their device you do not need to attract professional designers and spend a lot of money, as you can make beautiful paths in the garden with your own hands.

Walkway made of wood

Wooden saw cuts

Wooden round logs are a fairly simple material for garden paths. The raw materials for this can be found in any garden - for sure, old trees grow everywhere, which it is high time to replace with new seedlings. Wooden paths are made according to the following scheme:

Cut round logs 20-50 cm in diameter and 20-30 cm high from the wood you have. The blanks should be the same.
Remove the bark from them and dry them in the sun for several days.
Cover the blanks with antiseptic and primer to protect them from moisture and insects. Leave the rounds to dry for one day.
Remove the soil along the entire length of the future path to a depth of 4-6 cm. Pour a small sand cushion and compact it well.
Start laying saw cuts, alternating small and large workpieces so that there are small seams between them.

When choosing wood, it is necessary to proceed from how healthy and durable it is. This will determine how long the path made of saw cuts in the garden will last. It is advisable to give preference to solid types of wood. For example, oak will last about 10 years, pine - no more than 7. Round logs of old trees can be eaten by insects or rotten.

As practice shows, you don’t have to choose much - they use what is at hand. And if it turned out that after some time some saw cuts collapsed more than the rest, then they can always be replaced with new ones.

For the sidewalk, it is advisable to choose dry logs. If the path is not made for a decorative purpose, but in order to walk along it, you do not need to cut the wood into thin rings.

Advantages and disadvantages

garden paths from wood have their own advantages:

The main disadvantage is fragility of wood. Over time, it rots, especially in a humid climate or in places where groundwater is high.

Boards

As a material for paths in the garden, you can choose wooden planks. As a rule, such a path is laid in the form of a continuous flooring. This can be done both in the longitudinal and in the transverse direction. To make the path winding, the edges of the boards are cut or placed in a special way. Using this approach, one can model different variants- for example, a pattern similar to parquet.

If the boards are placed at a certain distance from each other and the space between them is filled with gravel or backfill, then the path will resemble railway rails.

You can make a path from the boards, which are laid out with solid flooring. This design is made raised from the ground by about 15 cm. Thus, the boards will not have contact with the ground, and the air space will allow the wood to dry faster after rain, which greatly contributes to the long-term operation of the material.

It will take a lot of effort and effort to make a garden path out of wooden elements with your own hands, but in the end could be a real masterpiece.. This path will be an extraordinary and beautiful addition to the design of the garden.

Masonry

One of the most reliable options is natural stone paths. In this case, you can choose a boot or cobblestone - they are equally durable. Laying stone on paths produced in this way:

Make a marking of the future path.
From the site where the paving of the path is planned, remove the top layer of earth. The depth of the layer is required by 8-12 cm more than the size of the largest stone that is prepared for the path.
Fill the resulting trench with a layer of sand of 12-15 cm, level it well and carefully compact it.
Lay the stones alternately on the sand cushion, pressing them tightly into the base. The step between small stones should be no more than 3-4 cm, and between large ones - 7-8 cm.
Pour the remaining space carefully with concrete mortar. When the concrete is dry, backfill the joints with fine sand or earth to make them look more natural.

Advantages of a stone path

Paving stone garden paths makes it possible to save the builder money and makes you feel like a real landscape designer. Moreover, this process is not so complicated and responsible.

The most important thing before you start choose the design of garden paths and decide on the scheme of their paving, highlighting the main sections where these paths will lead. These can be gazebos and outbuildings, flower beds and lawns, children's sandboxes, technical facilities and barbecue areas, alpine slides and artificial ponds.

As a rule, the width of the paths is chosen so that a garden cart can easily pass. Depending on the type of path, it is constructed with or without a curb. The track can be level with the ground or rise above it. In everyday life, the first option is more convenient, while the second is better in terms of cleaning - this way less sand or earth is applied.

The path in the garden can be paved on a concrete or cement base. In addition to natural stone, you can choose paving stones, paving slabs, decking, clinker brick, composite board, concrete poured into special forms, artificial stone.

The modern design solution is a geogrid, that is planting small lawn grass between parts of the structure.

pouring concrete

Concrete is a traditional material for construction, which is always popular due to its ease of use and its low cost. Build a cast path anyone can definitely:

Mark the boundaries of the path, drive in pegs along its contour and pull the rope.
Dig a small trench within the marked contours. Depth approximately 25 cm.
At the bottom of the trench, pour a layer of gravel and sand 10 cm. Tamp this pillow.
Cover the pillow with a "chain-link" or any available metal mesh.
Build formwork around the perimeter of the path.
Mix the mortar: 1.5 parts sand, 1 part cement, 1 part water and 2 parts gravel.
Pour the cement composition and with vibrating movements, evenly, with a spatula, distribute the mixture over the entire area of \u200b\u200bthe path. During pouring, pierce the mixture with a rod to release the remaining air.
Using the rule, make a final alignment and cover the track with a film.
In 4-5 days the path will be ready. All this time, it is necessary to moisten it slightly with water so that the concrete gains maximum strength and does not crack.

Car tires

Tires from cars have long been widely used in summer cottages: swings, ponds, flower beds are being built from them, and now they are also laying paths. This trend is quite understandable, given the performance of this material: tires are easy to care for, resistant to temperature extremes and moisture, are durable and non-slip. You can make a garden path out of them in this way:

brick paths

Best to apply clinker products because they are highly resistant to various kinds of mechanical and chemical influences. The most important thing is that the bricks should be intact and without chips, otherwise the path will come out not only unattractive, but also unsafe.

Laying the path goes like this:

Mark the path: drive a peg around the perimeter and stretch the rope.
Dig a trench along the contour - a depth of 20-30 cm.
Along this trench, install limiters from boards or bars.
Pour a 15 cm layer of gravel into the space between the limiters and compact it well. Pour a layer of sand on top of about 6-7 cm.
Remove the limiters and make curbs instead: on both sides of the path, lay a row of bricks set "on edge".
Form the inner space of the path from bricks: laying takes place in the usual position with the help of careful tapping with a rubber mallet or wooden spatula.

Recommendation: bricks do not have to be laid out close - to give the path originality, you can leave small gaps and fill them with pebbles. In addition, you don’t even need to fill up the seams - after a certain time, grass will sprout here and decorate your path.

paving slabs

Although tile can hardly be called a very cheap material, it is still used quite often for the construction of garden paths. There are several reasons for this: ease of work with the material, excellent performance and aesthetic appearance. But the most important thing is the ease of installation.

Mark the boundaries of the future track with stakes and rope.

The path is an indispensable element of any suburban or suburban area, which, in addition to practical benefits, can also deliver Aesthetic pleasure. Observing simple instructions, you can implement any of the options described above on your site, so feel free to start working, discovering new opportunities for improving your backyard.