Flowerbeds and flower beds with their own hands from bottles. Flowerbeds from plastic bottles do-it-yourself ways of dignity. bottle garden path

A plastic bottle is considered not only ordinary garbage, but also a real product for the quick implementation of creative ideas. This is, in essence, great material, thanks to which today it is possible to make especially beautiful ones. But what is the best way to ennoble a flower bed using ordinary plastic bottles? Today there are a large number variety of options for self-fulfillment unusual crafts for a private country house.

It is recommended to engage in the direct manufacture of the border with the help of two effective ways- vertical and horizontal position of the bottles. Method number one is easier and more affordable. For its implementation, you will need bottles with absolutely any capacity. It is best to use bottles with hard plastic, as they will significantly strengthen when filled. necessary material. The method under consideration involves the use of bottles various shades and quality. To fill the bottles, you only need earth. To create an original masterpiece, you need to fill a two-liter bottle with earth as much as possible. You can use bottles even with a pre-cut neck. They are easier to fill, and the trench will not be needed there with great depth. Although, as a minus, it is necessary to highlight a small strength.

Next, you need to dig a trench with the desired depth. The height of the fence directly depends on the depth of the pit. Bottles must be tightly packed, sprinkled with earth and rammed.

When laying horizontally, you must concentrate carefully, as there is a heavier mechanism. It is also necessary to dig a trench, but with a shallower depth.

The neck does not need to be cut. With this method, you can achieve the presence of a multi-tiered fence. This looks very aesthetically pleasing in real practice, but it is more problematic to execute. It is best to fasten the neck of the bottle with a mesh and drop it with earth.

Making flower beds - lakes with plastic bottles

Excellence - maximum saturation. Of course, the finished lake is decorated with a variety of flowers, birds, but it does not look organic if you do not follow the color scheme.

In this situation, the outer part of the bottle is not covered with paint. Acrylic paint works great. Such a bottle is filled with light sand. It is advisable not to touch the neck, otherwise it will not be possible to mix the paint. It is good when the bottle is pre-painted in blue, blue or green. The location of the lake is desirable to choose a flat one. But deeper terrain is not considered a problem, as the bottles are perfectly adjustable according to the height. You can also remove the excess land along the edge of the lake, and at the same time make an elevated type of curb. The bottles used should be installed in a hexagonal fashion. From plastic material, you can easily build a sculpture for the garden.

One of the most optimistic plastic flower crafts. At self erection Plastic flowers are perfect for colored bottles. A translucent type of flower with dyed petals also looks great. For the middle of the bottle, light, yellow and milky colors are great. At the container, cut the edges strictly in shape, and fold the bottles in a multi-tiered plan, so that the petals come out as a result of multi-layered. The texture of the petals in the boiled liquid changes. If you are processing plastic material at high temperature regime, then toxic substances will be actively released.

The cooled petal is bent with tongs and other devices. If you want to make the petals green, then you need to look for a green or dark bottle. From the brown bottle, the final result will be the presence of autumn. Dark bottles will look very advantageous.

Making a flower bed - container

The considered flower garden - the container has a relatively small size, for this reason it can be placed in any desired place. Due to its lightness and mobility, it will be admired by the people around. The capacity for application can vary from three to ten liters.

This container can be made in the form of any forest animal. To work, you will need high-quality glue, ordinary scissors, a bulk bottle and acrylic paint.

This flower bed is great for lawn owners. Initially, you will need to create an earth pile. On a hill, you can also install a bottle. Plastic must first be painted over. The main thing is to avoid red and brown shades.

When filling with earth, it is desirable to cut off the neck. To work on the central part, only dark-colored material is required. The next step is to lay the head of the bug, starting from the edges. Next, a red bottle is laid, tamped down and a fence is made.

Flower garden - a little animal from a plastic bottle

This one serves as a flower pot for the street. Only one plastic bottle is needed for the workflow. All used elements are attached with glue. When making an animal - a flower garden, a large amount of paint will be required. Purchased paint must have good water resistance.

You can buy special oil paint, but this type of paint takes a long time to dry. To obtain color overflows, it is recommended to use paint with a spray bottle. It creates haze and brightness, and dries much faster.

How to make a gnome from a plastic bottle?

If you want a bright strawberry bush to decorate your cottage at any time of the year, a stork to rise, daisies to turn white, and a firefly to burn in the evening, then find out how all this can be done from plastic bottles.

Broom from plastic bottles

It will certainly come in handy in the household. She can sweep not only garbage from the hut, but also collect fallen leaves, rubbish from garden paths.

To make such a strong whisk, you will need:

6 plastic bottles;
scissors;
hammer;
cutting.

First of all, wash the bottles under warm water, remove the labels from them. Now cut off the bottom of five bottles, cut off the necks from four. Starting from the bottom, cut the canvas of the containers into strips 1.5 cm wide. For the broom to have sufficient rigidity, stop before reaching the shoulders, as shown in the photo.

Do not cut off the neck of the fifth bottle, make a fringe on it in the same way. Now put 4 bottles on top of it. Prepare the sixth differently. Cut it below the shoulders, leaving the neck.

Put this sixth bottle on the blank of five containers. Insert the stem into the neck. Now squeeze the blanks a little so that the broom becomes flatter.

The final touch remains, make a few holes with an awl in the working part of the panicle, put a wire here, fix the product on the handle. Here's how to make a broom out of plastic bottles.

How to make a stork

This is what a wonderful stork can decorate your garden, city yard.

If you still have floorboard trimmings after building a house or repairing, they will come in handy. Here is what you need to prepare in addition to them:

plastic milk bottles;
green and red electrical tape;
self-tapping screws;
block of wood;
2 metal rods;
glue gun;
eyes for toys.

Cut off the bottom and neck of the bottles. From the resulting canvas, make four feathers. To do this, first cut the bottle on the side, then divide the resulting canvas into rectangles with scissors. Round the bottom of each and frame the feathers with a fringe by cutting the edges of the blanks.

Draw a stork template on paper or cardboard, attach it to the board, outline it, cut it out with a jigsaw. Draw a wing separately, also cut out 2 such details, screw them to the stork's body with self-tapping screws.

Leave the bird's beak unformed for now, starting from the head, glue the body and wings of the stork with blanks from plastic bottles. Note that the plumage of the bird on the head is different from the plumage on the body. For the head, shorter blanks are made.

To decorate the wings, you need to make not only white, but also black feathers. You will make the last ones by taking a shampoo bottle of that color. The same, but long, you will need when decorating the stork's tail.

Wrap red tape around the bird's beak. Glue the eyes, attach two metal rods in place of the legs. Fix their lower part on the bar.

Here's how to make a stork so as not to spend extra money on buying such a garden figurine.

Decorative flower beds - the first idea

Beautifully decorated flower girls are pleasing to the eye. Plastic bottles will also help in their creation. If you don't have suburban area You can implement the idea below in the summer on the local area in the city, on your balcony and even on the windowsill.

This flower bed-container is also made of plastic containers, but rectangular in shape. Prepare the following for work:

3-4 plastic bottles;
awl;
scissors;
glue;
white paint.

Cut off the necks and sides of two bottles, leaving the "sides". Match 2 containers, glue the place of their connection as shown in the photo.

Similar plastic flower beds may be based on not two, but more bottles. Then the middle elements of the flower garden are cut out without "sides".

Now you need to make holes in the bottom of the blanks with an awl to drain excess water. If such decorative flower bed will be at home, then you need to put it on a pallet or tray.

A beautiful fence is also cut out of plastic bottles. Its vertical fragments have a width of 4 cm, and the height should be 5-7 cm more than the height of the sides of the containers. Top part such a picket fence is pointed, the lower one is rounded.

Now cut the rest of the bottles into long strips. Attach them horizontally to a vertically located picket fence, glue. If the bottles are transparent, first paint them white or any other color, let the paint dry, and then cut out the elements of the fence. After that, glue it to the flower girl.

You can leave the flower bed like this or decorate it with flowers made from plastic bottles. When filling the containers at the bottom, first lay drainage in the form of small pebbles, then a small layer of coarse sand, and then fill in fertile soil.

The second option of a flower bed made of plastic bottles

This idea will certainly appeal to lovers of classic forms. Cut off the necks of two eggplants, but do not throw them away. The photo shows how they need to be shaped so that these parts turn into the legs of a mobile flower bed.

At the bottles themselves, cut out the sides, but leave along the side near the bottom and near the shoulders. Slide these parts of the two containers one into the other, remembering to secure with glue. Use it to attach the legs.

It remains to cover your creation with paint, let it dry, fill it with a small layer of drainage, light soil and plant your favorite plants.

When purchasing glue, see if it is suitable for plastic. The same applies to paint, because not every one fits well on this material.

Crafts for giving

After winter, there are still few bright colors in the garden. These naughty plastic bottle crafts will help fill this gap. These funny little mice will become both small flower beds and garden decoration.

For this garden craft you will need:

plastic bottles;
acrylic paints;
scissors;
glue;
fishing line;
buttons;
felt-tip pen.

Lay the plastic bottle horizontally, cut out the side of it, which is now the top of the container, but don't throw it away just yet. Draw 2 ears and a tail on it.

Color the tail and body of a mouse from a plastic bottle in grey colour and the ears are pink. Glue all the details in place, use 2 dark buttons for the eyes. Draw a mouth for the craft, glue pieces of fishing line on the nose that will become the mustache of the toy. After that, it can be used for its intended purpose.

The next flower garden for giving is done in almost the same way. Also cut out the side of the bottle, ears, tail for these funny piglets, then paint them in pink color. When the paint dries, fill the container with earth and plant flowers.

There are crafts for giving that look good during the day, and even more spectacular - at dusk, due to the fact that a neon lamp is lit inside.

Here are the materials needed for work:

green plastic bottle;
black or green wire;
yellow paper;
gold decorative wire;
neon lamp;
scissors.

Wash the bottle with warm water, remove the label. Now cut 3 strips of wire, twist them on the container as shown in the photo. The bottom of the wire will become the legs of the firefly, and the other parts of the wire will be draped with a rectangle cut out of yellow paper.

Draw wings on cardboard, cut them out and glue them on the back of the insect. Glue 2 beads to the lid, which will become the eyes of the firefly. Twist the golden wire in the form of his antennae. Bend the neon stick so that it lights up, insert it inside the container, secure its upper part inside the neck with adhesive tape.

Here's how to make a firefly out of a plastic bottle. It will look beautiful next to decorative plants, also made by hand.

Strawberries and flowers from plastic bottles

These beautiful daisies will turn out when using empty containers from under dairy products. Of course, first you need to wash them well and remove the labels. To make one flower, put in front of you:

3 plastic bottles white color;
cover;
scissors;
wire;
felt-tip pen.

Cut off the lower parts from the containers; we will not need them when making flowers from plastic bottles.

Leave the neck on one bottle, cut it off from the other two.

Lid orange color perfect for the center of a flower. It will only be necessary to erase the numbers indicating the date of production and the expiration date of the product. This is easy to do with acetone or paint thinner.

Now make 8 petals on each blank. To make them the same, use a stencil or first outline them with a felt-tip pen, and then cut them out. Then it will also need to be erased. Put on the first blank, on which the neck is preserved, the second, then the third. Remove the petals first to make the flower more voluminous. Close the lid.

Using a drill or a hot nail, make 2 holes in the lid, thread a soft wire through them, wind it on a hard one, which will become the stem of the plant. That can be wrapped with green electrical tape or painted in that color. It remains to cut and fix the leaves from the green bottle on the trunk, make 2 more daisies, and the hand-made flowers are ready.

Such bright juicy berries will also be a wonderful decoration for a summer cottage at any time of the year.

This strawberry bush is made very simply. The bottom is cut off from the bottle, set aside. The middle part of the container is not useful, it and the neck must be cut off and thrown away. But the remaining fragment from the neck to the bottom of the shoulders, insert into the bottom of the container. 2 more berries are also made, or as many as you wish to create.

Now these blanks need to be painted red, and when this tone dries, make dots of white or dark color.

A sepal is cut out of a green bottle and put on the recesses of the berry. In his and her center with a drill or with a nail and hammer, you need to make a hole, combine them and thread the wire. On the other hand, leaves cut from a green plastic bottle are put on it. Below the wires are connected and the lower edge is stuck into the ground. As a result, what a wonderful craft for the garden you will get!

There are others interesting ideas for giving. From the video you will learn what else you can make flowers from plastic bottles:

This video shows how to make bees from small plastic bottles:

The following master class will teach you how to create country figures of storks from the same material:

Well-groomed and bright flower garden- a great decoration for any personal plot or flower beds. During the arrangement landscape design it is necessary to use any readily available improvised materials. For example, create beautiful flower beds from plastic bottles for ground flowers with your own hands. With the help of recyclables, you can very easily decorate a nondescript fence or wall to do something unusual appearance hanging planter, flower garden fencing and even a full-fledged flowerpot. However, before starting work, you should first choose a flower bed model, as well as familiarize yourself with the technology for its manufacture.

The use of plastic containers in the arrangement of a flower garden has several advantages.

Perhaps the most indisputable plus is the ease of accessibility. consumable. Absolutely every family in large or small quantities buys cooling drinks, drinking water or household chemicals in bottles that are made of polyvinyl chloride.

Many people simply throw away the container after using the product, but some of the craftsmen improvise - create amazing flower beds from plastic bottles without investing a dime of extra money. Do unusual flower garden with their own hands, anyone who has a great desire and due patience can do it.

Bottle flower beds have other features that explain the popularity of this "know-how" among gardeners and summer residents:

With your own hands, you can easily make many options for a small fence for a flower bed out of plastic bottles. The choice is limited only by the size of the site and the imagination of the performer. The originality of the garden can be emphasized by multi-tiered and hanging compositions, as well as flower beds in the form of various animals or figurines.

Fences for flower beds

A fence made of bottles can be made horizontal or vertical method. The second option is considered the simplest, it involves burying the container with the neck down into the ground. This method is best suited when creating flower beds, which are distinguished by a complex shape, as well as when delimiting a plot into beds.

A kind of border made of plastic containers for a flower bed will allow you to realize the most daring idea of the designer. It can be a flower garden in the shape of a crocodile, a bright butterfly, a pond with swans, stars and much more.

This creation process can be broken down into the following steps:

Sketch development. We display on paper a plan for arranging bottles - their color, quantity and shape of the future flower garden.
Material preparation. We clean the bottles, tear off all the labels, thoroughly wash and dry. If necessary, you can paint the container in bright colors.
Plot marking. We designate a contour on the ground, for example, with sand.
Fence Installation. We dig a shallow ditch along the perimeter of the flower bed, the width of which should be equal to the thickness of the bottles. Fill the container with pebbles or sand. We consistently dig the bottles into the ground, joining them very tightly with each other.

Despite the simplicity of execution, the result will please only with a neat and well-groomed appearance of the created flower bed.

By placing the bottles horizontally, you get a full-fledged flowerpot that can be used for planting flowers or small shrubs. Before you start lining the flower bed with plastic containers, you need to choose a support for rigidity: a large tire, a barrel without a bottom, or a polycarbonate sheet.

Production order:

As soon as the fence made of plastic containers for the flower bed is ready, we place a drainage layer on its bottom, and pour fertile soil on top. It is recommended to decorate the structure from the sides with moss, shells or cones.

The original and rather unusual decoration of the summer cottage are hanging flower beds made from plastic. They are used to decorate a nondescript wall, space zoning and create the effect of a hedge.

There are two main implementation methods, as in the previous case: vertical and horizontal suspension.

Creating "hanging gardens" with your own hands with horizontal suspension:

Mark the contour on the bottle with a felt-tip pen.
Cut out a hole for planting flowers.
We make two pairs of holes and thread a fishing line or strong thread through them.
We adjust the length and fix it by installing the ring at the bottom and tightly tightening the knot.

In such containers, you can plant herbs, undersized plants or ampelous flowers.

Vertical flower beds made of plastic containers are made using a similar technology:

We cut two holes on the side of the bottle, leaving a bowl below, into which the soil will be poured.
We do at the base of the neck through hole and thread a cord through this hole.
We adjust the length of the rope, hang the pot on a metal hook or fix it on a horizontal bar.

To decorate a gazebo or equip a patio, you can use single planters. To do this, we need: a buckle and a crochet hook, stickers, spray paint, a stationery knife, a 1.5 liter bottle.

Sequencing:

Cut off the bottom of the bottle, align the edges with scissors.
We drill holes in the resulting glass, making a small indent from the edge (5-10 mm). The distance between the holes should be 12-14 mm.
We repaint the pots or decorate it to your taste. Leave the workpiece for some time to dry completely.
We tie the upper edge of the planter with yarn, using contrasting colors for this.
We pass a dense thread through the hole or we tie the rope ourselves.
We place the flower with the pot in the finished pots and hang the product.

From flower pots with muzzles of various fairy-tale animals, you can decorate a playground. It is recommended to involve your little helpers in creating such a fake with your own hands - children will take part in decorating the garden with great enthusiasm. Children can be entrusted with decorating plant pots or choosing images.

Multi-tiered flower bed

A multi-level composition resembles a pyramid in shape, which consists of several tiers. The lower step has the largest diameter, and the upper one has the smallest. The number of tiers is usually chosen arbitrarily, but it is worth considering the variety of colors for planting and the dimensions of the structure.

The flower bed is made in the following order

We select and sort bottles. It is desirable that the capacity of the same displacement is used in one tier.
Remove the labels and wash the container well.
We determine the boundaries of the flower garden and perform the markings corresponding to them.
We form a ditch of a large circle along the contour. The depth of the trench should be between 8 and 10 cm.
We install the first tier from plastic. To strengthen the structure, you can drag the fence with wire.
We pour the soil inside the barrier and tamp it well in the center.
We mark the border of the second tier, making a circle of smaller diameter.
We install the bottles, gradually forming the next step.
We pour the earth and erect the third tier in a similar way.

Some nuances should be taken into account when building a multi-tiered flower garden:

It is recommended to plant flowers of the same size in one tier.
On the lower tiers, it is best to arrange plants of dark shades, and light ones - higher.
Plants that tolerate well high humidity must be planted on the lower step. After rain or watering, part of the water flows down and accumulates there. Moisture-loving plants include: irises, geraniums, astilbes, forget-me-nots, primroses and violets.
Asters, marigolds, nasturtium and kosmeya feel best at the top of the composition. These plants are able to easily tolerate the lack of moisture.
It is very important to harmoniously distribute color accents. For example, contrasting two-color flower beds look very nice. With the transition of color from dark to light and from cold to warm, the compositions are very effective. For example: turquoise - purple - red or blue - orange - yellow.

It is advisable to select plants that bloom at the same time. Information on the timing of flowering and planting can be found on the seed packaging.

Paint selection

In "plastic craft" You need to be very careful when choosing colors.. It is very important that your product looks high quality and spectacular, the coating should not peel off from the rain and fade in the sun. To do this, you should choose paints that have an acrylic composition or use stained glass paints - the most expensive, but very high-quality material for decorating any plastic crafts.

Deciding to decorate the backyard area, pay attention to the flower beds made of plastic bottles at the neighbors' dacha. This is the most cheap option landscape design.

If available in the country a large number plastic bottles, everyone is starting to think about their disposal. Given that the material from which they are made is not subject to decomposition, it will not work just to throw them away. In order not to litter the site and not harm the environment, you can build flower beds from plastic bottles in the country, thereby not only reducing the amount of accumulated containers, but also ennobling the area adjacent to the house.

How to make a flower bed out of bottles?

Having decided to make a flower bed on your own, you should take care of the availability of a sufficient number of bottles. It doesn't matter what they had before. A flower garden of bottles of soda water or beer and vegetable oil looks equally beautiful.

The capacity of the container also does not really matter. When creating a flower garden, you can use absolutely all bottles:

small (up to 1.5 l) can be used for space zoning and the manufacture of individual elements;
large (5 - 6 l) can be used as a separate small flower bed in the form of some animal.

You will also need a special tool. It is worth taking care of the presence of:

Sharp scissors and knife. With their help, it will be possible to cut out elements of the desired shape and size;
Stapler for connecting various elements to each other;
High-quality cord, often used to connect bottles to each other;
Shila;
sheet of paper;
Pencil;
Sterki;
Rulers.

Before proceeding with the direct manufacture of a flower garden, you should first carefully work out the sketch. If you can’t come up with something interesting, you should look at a photo of flower beds made of plastic bottles. Perhaps you will like something and perform in.

Having decided what you will do, you need to take a sheet of paper and make the first sketch. You have to work on a scale. This will not only make it easier in the future to translate what was conceived into reality, but will also allow you to calculate whether there is enough material available. You may have to wait a little longer or send it to the store for shopping.

Ideas for further implementation

Most often, a do-it-yourself flower bed made of plastic bottles has the shape of a circle, square or rectangle. But if you wish, you can be creative by laying out a flower garden in the shape of a butterfly or some funny animal using plastic bottles.

The sequence of work in this case is as follows:

The site is being prepared;
The contours of the future flower bed of bottles are outlined;
Plastic bottles are dug in along the marking line to the optimum depth;
Soil is poured inside the flower garden to obtain the optimal height of the flower bed;
Flowers are being planted.

Zoning of the territory

If the area of \u200b\u200bthe summer cottage does not allow you to place such a flower garden, you can go to vertical plane. For this and the wall country house mini flower beds made of plastic bottles are attached. Such a flower bed will not take up much space, but will require more attention, since watering will need to be done much more often due to the rapid drying of the soil.

If this option seems quite simple and labor-intensive, it is worth considering the possibility of making a swan flower bed from plastic bottles. In this case, a five or six-liter container is used as the basis, which is covered with white paint from the inside. The neck of a swan can be made from a piece of thick wire, bent into a characteristic shape, and pasted over with pieces of a plastic bottle on top, thereby imitating plumage. Soil can be poured directly into the "body" of the swan, i.e. a five-liter bottle, or in special flowerpots, which can then be installed there.

For those who find the swan too complex a figure, the piglets may appeal. For their manufacture, one large bottle is enough. By cutting a hole for the soil, ears and a tail can be made from the samples. The inside of the bottle must be covered with pink paint. The cap of the bottle is the heel of the pig. You just need to paint on the characteristic lines and put two points. Also, do not forget about the eyes. They can be drawn in black. If desired, you can provide small legs from small bottles. Everything, the flower bed is ready: you can plant flowers.

The advantages of bottle beds

In addition to reducing the negative impact on environment may also be noted:

The long service life of such a flower bed due to the durability of the material used in its manufacture. This is especially true when growing perennials. Fencing made of plastic bottles will not allow plant roots to grow beyond the flower bed;
Ability to prevent excessive drying of the earth;
The ability to replace individual elements of the flower bed in case of damage to one of them.

Video: flower beds of piglets from plastic bottles

Plastic bottles are not only garbage, for real needlewomen they are a precious material for making beautiful crafts for giving. How to decorate a flower bed with plastic bottles? Today we will look at various options using plastic bottles to make original crafts for a garden or country plot.

bottle border

There are two main ways to make a border - vertical and horizontal bottles. The first way is simpler. For its implementation, bottles of various capacities and purposes are suitable. It is advisable to use bottles made of more rigid plastic, but this is not a prerequisite, since subsequent filling with earth will significantly strengthen the material.

The described method is also good because it allows the use of bottles of any color, quality, and the bottles do not need to be stained. The material for filling the bottles will be ordinary earth.

To create original design flower beds from plastic bottles, containers up to 2-2.5 liters are taken and filled with earth. You can also use those that have already cut off the neck. They are easier to fill, and the trench will need to be less deep, but the strength of such a fence will, of course, be somewhat weaker than when using whole bottles.

After that, a trench of the required depth is dug. The height of the fence will depend on the depth of the oblong fossa. The bottles are tightly packed, sprinkled with earth, after which the earth is rammed.

Horizontal laying more difficult and requires more precision. A trench is also dug for her, but much less deep, and the necks are not cut off. You can put the necks inside, or you can turn the bottom of the bottles towards the florist. This method allows you to make a fence multi-tiered. It looks very nice, but difficult to implement. The necks of the bottles are fastened together with a net and dug in with earth.

Photo examples of such borders

Flower bed-lake

The highlight of this decor is, first of all, its brightness. Of course, the finished lake can be decorated with flowers, birds, but it will not look so wonderful if the color is not kept.

Covering the outer part of the bottle with paint in this case does not make sense. This is good for smaller jobs, but for such a large-scale street decor neither a balloon nor Oil paint. But you can use diluted acrylic paint.

It's better to fill such a bottle light sand. This is done to minimize color distortion. If you cut off the necks, it will be inconvenient to shake the paint inside the bottle, and it will become impossible to fill it with dry sand.

Ideal if you have bottles originally dyed blue or blue-green tones. Just green ones are also suitable, but then it will turn out not a lake, but a swamp, which is also interesting. In the swamp, it would be nice to add a plastic frog and mosquitoes.

The place for the lake should be flat.

Slightly recessed terrain it doesn’t matter either, it’s enough to adjust the bottles in height, or you can remove excess land along the edges of the lake, and perform raised border. Bottles are placed close to each other hexagon method. Any other way to fill the plane with round objects is not suitable, as it leaves a lot of holes.

Plastic flowers are a great decoration for flower beds

One of the most beautiful crafts made from plastic bottles are flowers. For plastic flowers, it is advisable to use colored bottles. If you have gathered a lot of transparent containers, then a translucent flower with painted ends of the petals will look very beautiful.

White, yellowish and milk bottles will be great center of the flower. To bring this idea to life, the edges of the containers are cut according to the shape of the intended petal, the bottles are stacked in many tiers one into one, so that the petals turn out to be multi-layered.

In boiling water or over a gas fire, you can change the texture of the petals.

Please note that when plastic is processed at high temperatures, the material may release toxic elements.

In order for the deformation to go in a certain direction, you must first bend the cold petal tongs or other devices. In this case, the shape can turn out to be as close as possible to a natural flower, or, if desired, fantastic for fantasy decoration. Under the green petals, you need to look for green bottles, but any dark ones will do. Brown makes a wonderful effect. autumn leaves. Dark ones look very stylish. As you can see, the possibilities of decorating flower beds from plastic bottles are very wide.

Depending on the idea, you can use both the central fragment of the container and the rest. The upper part is denser and already has its own distinct shape. This can be conveniently beaten in a flower. The lower part is also interesting in texture, even deformations on fire will be somewhat specific for it.

There are many flower technician. In one small section of the general overview, even half of it is impossible to consider. Those who are interested in this topic should look for articles separately with a flower theme. The world of plastic flowers is diverse and immense. In the flower bed, they perfectly enliven the exterior.

Flower bed-container

The flower bed-container has small dimensions, thanks to which it can be installed anywhere. Light, mobile, small, nevertheless, with good performance, it will always attract attention and create positive.

There is nothing complicated in manufacturing, since it is usually made from a single large water bottle. Such containers are also available in 3 liters, 5 liters and 10 liters. For a very large flower bed, you can take an even larger bottle, but the very charm of the container flower bed is in its small size and small mass. In its own way, it can even be called just a flower pot. Many people know cases when bottles with a cropped top were used for seedlings.

The main container performs only the function of a pot, but in addition it can be decorate with flowers. It is also possible to make such a container in the shape of an animal. The result is very cute compositions.

To complete, you will need glue, scissors, a main bottle, auxiliary small bottles for jewelry and acrylic paints. In this case, you can also use oil dyes, and sprayers in cans.

If this is the first work of the master, and the general idea of \u200b\u200bperformance has not yet been found, then the most The best way-feel the material and its capabilities by making a container in colors. This will allow you to master both the labor-intensive flower technique and the arrangement of flowers on a three-dimensional plane. Flowers should be fixed with glue.

Ladybug flowerbed

This type of flower bed is very suitable in cases where there is a flat large lawn. A convex bug will create an elevation on a boring plane, improve the exterior.

The first thing to start when doing this type of street decor is to create earth pile. The elevation will become the place to install the bottles. Plastic containers must be painted. A reddish brown beer shade would not look good in such a flower bed.

If earth filling is planned, then the necks can be cut off. This makes it easier to compact the earth in a bottle and easier to install later. central part made from dark bottles. It must be done from the very beginning of work. If you do not follow this rule, then the center may inadvertently shift or be curved.

The next step is laying the head of the bug, starting from its edge. In the plane of the head on the oval surface there will be inevitable displacements of the rows of bottles. Therefore, so that they do not affect the border of red and black, it should be performed first of all after the center line. The next step is to smoothly lay the red bottles, tamp them down and make a fence.

Flowerbeds-animals from plastic bottles

Flower bed-animal can perform the functions street flower pot . To do this, it is based on one main plastic bottle. All parts that are necessary for decoration are attached with glue. making holes permissible only in those parts of the bottle that will not hold water, that is, at the top.

To make an animal, you need a lot of paint. The paint must be waterproof and preferably have dense texture. Oil paint may be suitable, but keep in mind that it does not dry well.

overflows bright color provide paint in spray cans. Paints based on acetone solvents soften and deform plastic. Perfectly fit for the job acrylic dye solution. It is able to create that very dense matte texture and brightness, while it is not poisonous and dries quickly.

It is advisable to have enough small and large bottles on hand to complete the details of animal figurines. All of them are attached to the glue and covered with paint mainly from the outside. Even here, however, there are exceptions. Very complex work is performed by many different techniques.

Gnomes from plastic bottles

A very cute detail of the flower bed is a gnome. It can be placed along the edge of the path, and in the middle of the flower bed, it will look appropriate everywhere. Exists two ways its implementation. The first - actually from the bottles, the second - with the use of papier-mâché. The first method is undoubtedly simpler and requires less time to manufacture, but the second allows more opportunities to show the facial expressions of the figure. In both cases, it is recommended to use a large 5 liter water bottle as a basis.

Simple gnome performed by connecting simple parts. As hands one-liter or one and a half liter bottles are used, as they are elongated and thin. You can glue it with any tool that can fix plastic.

The necks of the bottles are cut off in the place where the rounded convex part ends and only the cylinder is left. Special small fixtures attach the part to the main body without deforming it. By adjusting the shape in this way, elements of clothing and a hat are made. The finished figurine is painted, small elements are painted, dried and placed in a flower bed.