How to make a wooden table with your own hands? Do-it-yourself wooden kitchen table Make a massive do-it-yourself table

Dinner table - an essential attribute of any dining room or kitchens, center of gravity for all families on weekdays, and especially on holidays, when behind him are going relatives and friends. Therefore, the table must be comfortable, of high quality and beautiful.

Big in stores today choice, but it is much more pleasant to make a dining table with your own hands. Moreover, this is a significant saving for the family budget.

Dining table options

Extendable dining table. The most popular option. Small for everyday use, with the arrival of guests, this table increases significantly due to additional countertops.

Folding table - great solution for a small kitchen. The simplest option is fixed on wall tabletop and leg support.

Folding table. The classic representative of this type of furniture - When assembled, it resembles a cabinet. It has one narrow tabletop-frame and two wide large ones, which are located on the sides and unfold.

A very handy thing that is suitable for both the kitchen and the living room. When folded, it can even be unfolded - a full-fledged dining table.

What can be made from?

materials that are used for the manufacture of dining tables, enough:

tree;
chipboard, chipboard, MDF;
plastic;
natural or fake diamond;
metal;
glass other.

Each of them has their own pros, as well as cons.

Tree
Solid wood table is a classic. Wood attracts people not only because of its beauty, but also because it is easily processed. Moreover, the tree is ecological material that has a positive effect on human health. But, unfortunately, it has its drawbacks. At the table you need to carefully care. Wood is sensitive to climate change. conditions in room. For example, if the room is quite humid or hot, it does not affect the material very well.
Glass
whether it be coffee, dinner or some other, it looks very stylish. But this stuff is hard processed. In addition, not every glass is suitable for a dining table. Need to pick up lasting material. Best for table top armored glass, the cost of which is very different from ordinary glass, and the processing is carried out only at the factory where it is used special equipment.

Wooden dining table

So you've decided do dining table on kitchen with your own hands. First of all, you need to decide on dimensions future product, so that it harmoniously fits into the interior.

You can take it ready drawing dining table, if indicated in it dimensions meet your requirements.

For example, consider manufacturing dining table from wood.

This simple rectangular a table with four legs Great look like in classic interior, and in Selecting the appropriate method finishes, you can make a dining table in or in

Materials and tools

Before assembling the table, prepare materials:

balusters(legs) - 4 pcs. Height - 73 cm. They should not be thin;
cutting boards:
5 x 15 x 100 cm (for countertops) - 4 pcs.,
80 cm (long crossbars) - 2 pcs.,
40 cm (short crossbars) - 2 pcs.;
sandpaper;
glue carpentry;
dowels.

Note: countertop boards need polishing.

necessary for the manufacture of a dining table:

pencil, roulette, meter;
hacksaw, a circular saw or Bulgarian;
plane;
drill(drill 8 mm.);
screwdriver or screwdriver;
self-tapping screws(30 mm);
brushes.

Manufacturing steps

Step 1. We make a table. Boards trim first in width, and then in length. Process surface planer. Sand the wood thoroughly so that the countertop becomes smooth. Edges must be well finished. If you do this, the boards will tight adjoin each other.
Make the same marks on the edges of the boards, step back 10–15 cm. Then drill out holes and apply carpentry glue. Plaster the edges. After that, the chopsticks must be driven into the holes. Connect boards.

Excess glue must be removed emery paper. Level the joints between the boards with a planer, grind tabletop surface and edges.

Note: if you walk on the countertop with a metal sponge, the wood will become more textured.

Step 2 We fasten the legs and do base for table top. Balusters must be connected with short crossbars thus:

Step 3 Pairs of legs connected by short crossbars are fastened together long crossbars.

Step 4 Drill in long crossbars holes. When the glue dries, install countertop.

For more strength it is possible to strengthen the structure with additional transverse bars or boards.

How to make a table from a metal profile:

table decoration

Definitely more before assembly need to antiseptic impregnation.

When the work is done and the table is ready, you need to do it finishing. First of all, choose color your product. It can be absolutely anyone. Best fit oak or walnut, these colors are considered classics.

Give the wood the right shade and even imitate valuable wood species can be used with decorative stains.

For protection from moisture and giving presentable appearance need to cover the table several layers varnish. Each layer must be thoroughly dried.

If desired, the tabletop can be decorate. For example, interesting and uncomplicated even for a beginner, it is applicable both for decorating a new product and for restoration dining table with your own hands.

How wooden dining tables are made, see video:

Wooden furniture has always given the tenants of any home coziness and comfort. Today, tables are available for almost every taste and from any materials, but, oddly enough, wooden furniture is always in greater demand.

Manufacturing technology

The ability to make a wooden table with your own hands in these conditions is a practical talent that not only provides good cost savings, but also allows you to create original themed furniture items for the home.

In order to understand how to make a table out of wood, you first need to decide on the purpose for which it is created. If it's normal table element kitchen furniture designed for dining, then it needs to be made practical, while adjusting to the style and design kitchen interior. On the other hand, it can be a table for country rest, which can have a rather original look. Its main characteristic will not be strength, namely colorful appearance, atmospheric.

To make the simplest wooden table with your own hands, the drawings of which can be found almost everywhere on the Internet, it will take a few minutes of searching and comparing, after which you can already search necessary material and get to work.

A table made by one's own hands may not be inferior to the factory one either in beauty or in quality.

A wooden table can be made using different materials. It can be old pallets or edged boards and beams, solid wood or chipboard, as well as other wood materials. Depending on the complexity of the design, you will need different tools that almost every beginner or professional woodworker or builder has.

It should be noted that the wooden table with its with my own hands is not only a convenient piece of furniture, it is also a reason for pride. Every time when guests come to the house of a craftsman who made a dining table with his own hands, they note for themselves the talent and extraordinary taste of the owner.

Selection of tools

Before you start working on a new table, you need to prepare a tool. Depending on the complexity of the work and the purpose of the finished product, you will have to look for tools of varying complexity.

In addition, it is important to have a separate workshop or utility room in which it will be possible to process wood. Firstly, this is necessary in order to avoid harm to the health of others, since additional protective equipment may be required when working on the table.

For example, harmful fumes are often emitted during the staining of wood. This room should be well ventilated, it is best to use ventilated rooms. A garage is also ideal for this, but the presence of woodworking waste (sawdust and others) can harm the car that is stored in it. Therefore, you need to choose the room wisely.

What serious and professional tools may be required:

A rotary miter box, thanks to which it will be possible to make several saw cuts at the corners of the table elements. Such a tool is best to have in your own possession, and not to rent, because it is universal, it helps in different jobs.
Electric jigsaw, which is needed for sawing boards and wood materials in a vertical plane.
A grinder designed to obtain perfect and even wooden surfaces. You can also use ordinary sandpaper, but this will prolong the process for quite a long time.
A milling cutter may be needed in order to make tongues and grooves.
Ordinary hammers and nails, corners and self-tapping screws, a drill, and other tools will also come in handy.

In some cases, if home production wooden furniture happens quite often, you can get a universal woodworking machine. It is focused on the household power supply and has the functions of circular, jointing, and lathe, which will help increase the efficiency of the machine.

materials

In order to make a table, you need to use enough hard materials. The softest breeds, such as poplar and others, are not suitable for this. Soft woods such as pine and spruce are easy to work with and are often used as temporary tables.

Any material is suitable for making a table - from the remains of boards and plywood to wooden pallets.

In order to create a more durable and reliable for long-term use of a home or garden table with your own hands, it is better to use hardwoods such as oak, beech, walnut and so on.

The hardest woods will take long and hard work, but such tables will eventually last for many years. The disadvantage of the hardest rocks, in addition to the complexity of processing, is also the weight of the finished furniture - they are quite heavy, although dry walnut, for example, is quite optimal in terms of weight, strength and complexity of processing.

It is best to look for materials that are available near where the table is made and used. Then they are likely to be cheaper. Often walnut wood is used for the manufacture of tables because it is not only hard and soft, but also lends itself well to openwork carving. Thus, walnut tables are not only durable, but also turn out to be quite beautiful, if a point regarding its further decoration is foreseen in the processing plan.

The texture of the wood and even the presence of knots are also important in decorating the table. In the case when soft woods are used, such as pine, for example, the countertop is usually made from boards with knots. The main requirement for them is that they do not fall out, are not black or brown, that is, they are not rotten. Thanks to the knots, the wooden garden table has a high degree of authentic aesthetics when it comes to looks.

All these types of wood are best used in the form edged boards. If this is not possible, it is better to use a well-dried tree that can be processed on a universal household machine described above.

Material pretreatment

In order for a wooden table to last as long as possible, the wood used for its manufacture must be impregnated with protective compounds. These compounds include antiseptics and substances that protect against moisture. One of the best free tools that protect wood from rotting is considered to be oil treatment. Engine oil, however, is not recommended for use on surfaces on which food will be located.

The table surface can be processed different ways: polish, stain, varnish or just paint.

Therefore, for table parts (for all or separately for the tabletop), you can use a water-polymer emulsion that will protect the wood from moisture almost forever. The use of various furniture nitrocellulose varnishes, which used to be popular, is now quite rare. Water-based acrylic varnishes show themselves better in this regard.

Wooden elements of wood can be tinted before a finished table is made from them. It is also susceptible to staining. In order to color the nodes of the table, you can use a mixture of varnish and paint. But with the mixture you have to be careful.

In order to determine if the color is suitable after mixing, you need to take a wooden test piece and paint it. After complete drying, you can determine whether the color is suitable or not. It is worth remembering that nitrocellulose varnishes are mixed with oil paints, like acrylic, but the latter, unlike the former, have no mixing restrictions.

Drawing and Assembly

To make a table with your own hands, you definitely need its diagram, which you can make yourself, take it from open sources, or hire a specialist to draw it. The easiest option is the first one. The drawing of the table should be as clear and accurate as possible. Separately, it is necessary to evaluate how the tabletop is connected from separate boards, as well as what sizes the legs for the table have, how they are connected to each other and the tabletop.

Scheme No. 1 of the table with your own hands.

A large do-it-yourself wooden table (s), the drawings and diagrams of which are most common, requires a certain durable material with good bearing capacity. A large table, however, will need to be done for a long time, and it will also turn out to be quite heavy, but roomy. You can appreciate the large wooden tables with your own hands in the photo below.

A small table can be made not from solid wood or boards, but, for example, using old pallets, choosing the best boards from them without traces of decay, cutting them if necessary and making a tabletop out of them with glue or transverse fasteners. For the countertop, you can use tongue-and-groove boards that will be glued together or fastened with transverse joints.

Diagram of a table with cross legs.

The legs are most often made cross. To do this, you can use both boards and bars, which gives the table additional stability. Straight legs should be connected using detachable drawers, which come in several different types and designs. At the same time, a strapping is created under the table top: the heads of the legs are connected to each other by longitudinal and transverse strips with inserts that act as the main support for the table surface.

Scheme of a country table.

Usual country table ik, made by hand, or even several tables can also be equipped with chairs, for which the same materials and a similar design style are taken.

Using the most simple tools, it is easy to make a table for a cozy tea party in the summer in the country, or a large desktop for your own office. It all depends on the desire and the creative component. Whatever the table, the main thing to remember is that its purpose is not only to put things on top or put appliances. He still has to make the life of the owner comfortable and cozy. Therefore, when assembling such a table, you should first of all think about all the additional features that such a simple piece of furniture can give.

Video: do-it-yourself wooden table

We will send the material to you by e-mail

Not everyone likes to buy ready-made products for home use. The soul of some people requires creative and practical self-realization. The editors of the online magazine, the site invites those who wish to learn how to make a wooden table with their own hands, what is required for this, and whether there are pitfalls in such work.

A beautiful piece of wood for the kitchen or living room, made with love

Professional carpenters are unlikely to need our step by step recommendations, but for beginners, advice will come in handy. To begin with, consider what products you can make with your own hands from wood.

Of course, the more skills a person has, the harder model he can do. But in order to build a table with your own hands from wood, there are ready-made drawings and photos to help beginners.

How to choose material for self-production of a wooden table for home and garden

What to make a dining table with your own hands? The best is wood. The most malleable for the newly-minted master will be pine. Poplar products will look more solemn. For the street, you can take mahogany.

If you want an option for the home and easier, then you should consider laminated chipboard with an optimal thickness of 25-35 mm. You can take it on the table wooden planks, birch plywood with a thickness of 35 mm. Legs can be made of metal or wooden beam(about 50 mm thick).

In order not to be mistaken with the amount of material, a preliminary drawing of the future design is made with exactly the specified dimensions.

Advice! Suitable product height varies between 750-800 mm.

Related article:

DIY furniture made of wood: for garden, children's room, kitchen, sauna, garden, arbor; how to restore pieces of furniture, useful tips and recommendations from experts - read our publication.

What tools are needed to make a wooden table with your own hands

It doesn’t matter what shape the future table will be: a certain set of tools is required to work with wood. You can’t do without a jigsaw, and it will be much easier to work with electrical model. To fix all structural elements, either a drill with a multi-stage drill for holes, or confirmations is used. To grind the product to perfection, you need either a special nozzle for a drill.

For greater fastening strength, carpentry glue is included in the tools.

How to make a wooden table with your own hands - step by step instructions

We have selected four types of structures that you can make on your own, even with a minimum of carpentry skills. We offer you to learn about the stages of manufacturing a round and rectangular table, coffee table and models for a garden arbor.

Making a wooden round table

It is easiest to make a round table top and a binder ring from either 1500 × 1500 mm and 1280 × 1280 mm. You will also need two strips of chipboard (1110 × 120 × 25 mm). We will make the legs from four wooden bars measuring 120 × 50 × 750 mm.

How to make a tabletop

How to draw a circle perfectly even? On a sheet of plywood in the center, place your own thumb with a string attached to it with a pencil. The length of the rope from the base to the top should match the radius of the future tabletop. Holding your finger in one place, draw a circle with a pencil around the full length of the rope. It remains to cut it with a jigsaw.

The circle-underframe is cut out in a similar way.

Leg manufacturing

A round table made of wood or chipboard will look charming if done consistently. You don’t have to mess with the legs if there is no excessive originality in the plans. The bars are divided into 4 parts according to the desired table height minus the thickness of the table top. First, one leg is cut off, and the other three are already aligned along it.

All processing by the grinding machine is carried out immediately.

Advice! Sanding should not be rushed, as the first coating with varnish will give out all the shortcomings.

Assembly of the structure and processing of the finished product

Assembly is carried out in stages. First, the strips are aligned groove into groove. Then the crosspiece of the slats is connected with the legs with confirmations, as in the figure below:

If you want to make the structure stronger, before connecting the legs to the tabletop, their upper base is smeared with glue.

Advice! Nails are not used in such work: a self-tapping screw or confirmation can be unscrewed without problems, and the connections will be much stronger.

Making a rectangular wooden kitchen table

The rectangular design is classic and very useful in everyday life: it is convenient to cook on such a table and you can comfortably dine at it.

How to make a tabletop

The tabletop made of wood for the table is made either from a whole sheet of plywood, or from individual edged boards processed to perfect smoothness.

Having fastened the boards with screws and glue, they begin to manufacture the frame.

Production of wooden legs for the table and frame

At the heart of quadrangular models is a frame. It serves to securely fix the legs, ensuring the stability of the entire structure. The tabletop is turned over, measured 3-4 cm deep on each side and the measurements are transferred to the boards. As a result, you will need two boards of smaller length and two larger ones.

The frame is made of four elements: according to the approximate ratio, these are two boards of X cm and two of 2X cm. They are overlapped with each other in turn, building a rectangle. In order not to break the angle of 90 °, any board is used while working with a screwdriver: they press the structure with it while tightening the screws.

As soon as the frame box is ready, they begin to make legs. You can take ready-made balusters for the table, buy metal supports, or cut them out of bars according to the desired length according to the drawing.

Both the frame and the legs are subject to obligatory thorough polishing!

Product assembly and finishing

The frame is screwed to the countertop with glue or self-tapping screws. Then the product is turned over and the legs begin to be attached.

Important! It is better to make holes for the screws in advance. This eliminates the possibility of splitting the tree.

Why not use nails and a hammer? Not everyone has the skills to work with a hammer - here it is dangerous not only to hit your finger. From excessive zeal, it is easy to damage the wood by splitting it. Confirmates and self-tapping screws hold the tree much stronger.

As soon as the leg is fixed, the angle is immediately checked: there should not be any deviation from 90 °. The operation is repeated with other legs. You can attach the legs directly through the countertop, but this will affect the aesthetic component of the product.

Related article:

: Photo best ideas. What can be done from a pallet for an apartment, office and cottage; rules for the selection and processing of pallets; master classes on making a table, sofa, bench, armchair and shelving - read in our publication.

Making your own wood coffee table

Not only a beautiful element of the interior, but also useful. No need to look for where to put a book, gadget, glasses, TV remote control in a conspicuous place. Such necessary structures are made from different materials: metal, glass, plastic, chipboard, wood. But let's leave other materials alone and concentrate on working with wood.

The choice of a wooden tabletop for a table depends on the expectations of the owner of the product. Someone wants something massive, while someone prefers lighter options. Let's go with a simple solution.

We buy five boards 30 × 150 mm and process them to perfect smoothness. We immediately saw off the desired length on the countertop: you should get 6 identical canvases. We take four bars on the legs, 6 canvases of shorter length on the lower tabletop, 4 narrow slats for the frame.

Illustration	Action Description
	For brushing wood, use a grinder with a brass brush head. The procedure will expose the structure of the tree, giving the product a special flavor.
	We pass back and forth on each board from the side that will be the front.
	We process wood with fire. The flame is gradually moved from place to place: the board will acquire a beautiful darkish tint. The procedure will finally destroy unnecessary soft wood fibers. We actively wipe the entire surface with a felt boot or a piece of felt.

We proceed to the process of assembling a small table with our own hands from wood.

The lower and upper tabletops are stacked on work surface wrong side towards you. The boards are laid tightly to each other, gluing them together. As soon as the boards grab, slats are attached to the top tabletop. They will serve as a frame and a fastening element. They can be glued or screwed with screws. The self-tapping screw is screwed in the center of the rail into each of the boards.
The legs are screwed to both the table top and the rails. You can use furniture corners.

Video: the process of making a wooden coffee table

Making your own wooden table with benches in the gazebo

It's time to take the time and build a garden wooden table.

It is best to take boards standard sizes. Studs are purchased at a hardware store (suitable with a length of 16 cm), washers (24 pieces). Long nails (8 cm) will fit for a garden gazebo.

To paint a product or just varnish it is already a matter of taste.

A do-it-yourself table may well be made even by a home craftsman who does not have any experience in carpentry. Of course, this will become possible if the design of the table is fairly straightforward and understandable.

For example, it is not always possible to find a suitable ready-made table model for an overly small kitchen. Buying custom-made solid wood furniture is quite expensive. Therefore, sometimes you have to take up tools and design your own “work” on your own, starting from the specific dimensions of the place where you plan to install the table.

In addition, there is often a desire to show their creative abilities in the conditions of a summer residence, especially since there is always a desire to beautifully equip a veranda or gazebo of a suburban area. If you have on hand suitable materials and tools, then you can either sit down to draw up a drawing of the future table, or use finished project and then get to work.

To figure out which type of table you can build with your own hands, it is advisable to consider several options for this piece of furniture.

Tools for the job

Before starting work, it is necessary to prepare the appropriate tools that will be required for the manufacture of any wooden table. The amount of material for each model will be different.

You can use the usual, traditional hand tools that carpenters have always worked with. This list usually includes:

Planer, which level the wood and drive the parts to the desired size.
Chisels for sampling various holes and grooves, removing small protrusions.
Saws of various sizes and modifications, which are used to cut thick boards or make small cuts.
Pencil, tape measure, corner and ruler.
Screwdriver Set.
Clamps for temporary fixation of glued parts.
Sandpaper for grinding.

Many of the tools can be replaced by more modern and convenient devices:

An electric jigsaw will do all the work for which the various saws mentioned above were previously used.

Jigsaw rating

The grinder will help to make the surfaces even and polish them to a shine, eliminating the very tedious manual sanding procedure.

Milling machine with a set of cutters. This device will help round sharp corners, drill curly grooves for furniture hinges, and if necessary and have some experience, then with it you can decorate the table with a relief pattern.

will significantly speed up the work, since you will not have to spend several minutes twisting each screw. In addition, during certain operations, it is possible to install one of the cutters or conventional drills into it, for example, in order to process an edge or make a perfectly even large or small hole (groove).

The building level will help to make the product even and neat, as it will show all possible irregularities and distortions.

So that the finished furniture does not turn out "skewed", the assembly is controlled by the level

An easy-to-make table for a summer cottage

To make a similar country table - everyone can do it

Necessary materials

For such a country house, having a tabletop size of 1680 × 850 mm, not too many wooden blanks will be required. You need to prepare the following:

Timber, section - 750 × 100 × 50 mm - 4 pcs. (table legs).
Self-tapping screws, bolts and possibly metal corners.
Joiner's glue.
Board size:

1680×100×25 mm — 4 pcs. (longitudinal frame elements);
850×100×25 mm — 2 pcs. (transverse frame details);
1580×100×25 mm — 2 pcs. (facing boards for the side elements of the frame);
950×100×25 mm - 17 pcs. (boards for countertops).

All wooden elements must be treated with compounds and have a prepared smooth surface. If it is planned to “darken” the wood, then it is covered with a stain, and for the appearance of a textured pattern, it is carefully passed from above with a grinder. Fine-grained sandpaper will remove the faded raised parts of the wood pattern, and they will become lighter than the depressions.

Installation of a garden table

When all the details for the frame are prepared, you can proceed to the assembly.

Frame or "box" of the table

The first step is the details of the tabletop frame - four longitudinal boards 1680 × 100 × 25 mm in size and two end boards 850 × 100 × 25 mm, laid out on a large table or on the floor. On the end boards, the location of the inner and outer boards is marked. Using a ruler, based on the drawing, the required distances are measured and marked with a pencil. Be sure to accurately note the width of the longitudinal board at the junction with the end, especially if the connection will be made by tie-in.

The connection of elements can be carried out in different ways:

Connection with the choice of "quarter" and using metal corners

- using a steel corner - this is the simplest and most reliable way;

- the tie-in method is a more complicated method, since it requires exact dimensions not only in the width and length of the connecting elements, but also in the depth of the board;

Several types of tongue and groove connection

- “groove-thorn”, shown in the second figure a), b), c), d) and e) such a connection is also quite difficult for beginners with no experience;

- dowel connection is shown in fragment e) - this method also requires perfect accuracy when marking and drilling holes in the parts to be joined.

All connections, as a rule, are carried out using glue. The only exception is the fastening of parts end-to-end with a metal corner.
The frame must have perfectly aligned right angles, therefore, after connecting all the elements, it is necessary to carry out control using a building corner and measure and compare the length of the diagonals.
If the parts are fixed with glue, they must be fixed in clamps and left until it dries completely, otherwise they will not be connected securely.

When the glue dries and the frame acquires a certain rigidity, cladding boards measuring 1580 × 100 × 25 mm are fixed to the outer longitudinal sides. The place of their fastening also needs to be marked, since along their edges there should be a distance for mounting the legs. Facing boards are also planted on glue and fixed with self-tapping screws, the heads of which should be sunk into the wood by 1.5 ÷ 2.0 mm.

The next step is the transverse sheathing of the tabletop with boards 950 × 100 × 25 mm. The place of their fastening must also first be marked, starting from the middle of the frame, since they must be installed at a distance of 5 mm from each other. The worktop protrusion above the frame should be 25 mm on all four sides.

Further, each of the boards is fixed in four places to the longitudinal elements of the "box" of the table, and the extreme boards are also fixed to the end sides. In order for the self-tapping screws to be recessed, recesses with a diameter of 8 mm are drilled in the boards to a depth of 2 ÷ 3 mm, then, in the center of these recesses, through holes are drilled with a drill of a smaller diameter (usually 3 mm), into which the screws will be screwed. To prevent cracking of boards installation work through holes must be drilled.

After that, legs from a bar with a section of 750 × 100 × 50 mm are fixed to the edges of the longitudinal boards, they must exactly match the width of the tabletop.

The next step is to install the legs.

The legs can be fixed to the frame with self-tapping screws, but it is better to fix each of them with two bolts, placing them diagonally at the junction. Through holes are drilled for the bolts, and nuts are tightened on them from the inside of the frame using a wrench.
The final stage of manufacturing is the sealing of the self-tapping screws with a mixture made from carpentry or epoxy glue and sawdust. With this home-made putty, fill the recesses above the caps and level them well. After the glue dries, the entire countertop, and especially the places covered with “corks” of glue, must be sanded well.

After that, the table can be varnished or water-based paint. After waiting for the decorating or protective layer to dry, the product can be installed in summerhouse, on the veranda or terrace in the recreation area.

If desired, it will be easy to make a bench or a set for the table.

Small folding table for the kitchen

Such a small folding table is perfect for a small kitchen or a very small room.

Its design is designed in such a way that the tabletop cannot fold on its own if the table leg is accidentally hit, so the table is quite safe for installation in a children's room.
The presence of a double-sided capacious bedside table will allow you to store various little things and small toys in it.
The table is equipped with a worktop of sufficient size so that the child, sitting at it, can do homework.
In addition, on the tabletop there is a place for a laptop or books necessary for studying.
If necessary, this small table can easily replace an ironing board if a soft cloth is laid on its surface.

Given all of the above, the table can be called multifunctional, despite its very compact size.

Find out how, and also check out several models with detailed instructions in a special article on our portal.

Necessary materials and parts for a folding table

To assemble such a comfortable piece of furniture, you need to prepare all the details that make it up. The list of necessary blanks is given in the table below, and how to make them will be described and shown below:

Scheme of the table with the assembly part numbers affixed (the illustration is clickable - click to enlarge)

part number on the drawing	the name of detail	Quantity, pcs.	Part size, mm	Production material, thickness, mm
1	Folding table top.	1	600×600
2	Fixed table top.	1	600×475	Plywood 25 mm thick
3		2	530×30
4		2	120×30	Plywood 18 mm thick
5	The upper end part of the groove, which limits the movement of the leg.	1	122×30	Plywood 18 mm thick
6	Groove element for leg movement on a folding tabletop.	2	530×20	Plywood 18 mm thick
7	Groove element for the movement of the legs on the table top.	2	120×20	Plywood 18 mm thick
8	The lower end part of the groove, which limits the movement of the leg.	1	122×20	Plywood 18 mm thick
9	Side walls of the table.	2	720×520	MDF 19 mm
10	The horizontal details of the pedestal, forming shelves.	3	520×312	MDF 19 mm
11	The lower vertical part of the internal partition of the pedestal.	1	418×312	MDF 19 mm
12	The upper vertical part of the inner partition of the pedestal.	1	312×184	MDF 19 mm
13	The middle horizontal part of the pedestal.	1	310×250	MDF 19 mm
14	Cabinet door.	1	477×346	MDF 19 mm
15	Cabinet shelf.	1	310×250	MDF 19 mm
16	The front panel of a drawer of a curbstone.	1	346×209	MDF 19 mm
17	The front panel of the drawer (located behind the front).	1	418×312	MDF 19 mm
18	Drawer side panels.	2	341×250	MDF 19 mm
19	Back panel of the drawer.	1	272×120	MDF 19 mm
20	Bottom panel of the drawer.	1	341×272	MDF 19 mm
	Drawer handles and drawer doors.	2	Ø 30 mm	Wood
	Upper leg piece.	1	80×80×18	Plywood 18 mm thick
	Mobile table leg.	1	Ø top 55, bottom 30, height 702	Wood
	Furniture hinges for connecting two parts of the tabletop.	2	Ø 50 mm	Metal
	Furniture hinges for doors.	2	The size depends on the shape.	Metal
	Bottom end panels covering the gap under the pedestal.	2	20×300×5	Plywood 5 mm

The drawings show a drawing of the table, which can be relied upon in the process of manufacturing and assembling elements into a single structure.

The main dimensions of the table (the illustration is clickable - click to enlarge)

Separate nodes of the table - a drawer and a guide channel for moving the legs (the illustration is clickable - click to enlarge)

For the manufacture of all the parts listed in the table, modern electric tools will be required that are able to bring the workpieces to professional perfection.

Find out how to do it with a photo and description in a special article on our portal.

Installation of a folding table-cabinet

It is worth starting the manufacture of the table with the most important and largest part of it - the table top. Since the table is folding, this element will consist of two parts - stationary and "mobile", that is, one that can be folded down if necessary. When folded, this table may well serve as an ordinary compact pedestal.

Illustration	Brief description of the operation to be performed
	The first step from plywood 25 mm thick, using a jigsaw or a circular saw, is to cut blanks for the countertop, 600 × 600 and 600 × 475 mm in size.
	Further, marking is carried out on a larger panel - a semicircle is drawn, since the front of the table should be rounded. In order to achieve the correct shape of a semicircle, you can use a large construction compass, or you can make it yourself - from a nail, pencil and rope.
	Then, along the marked line, the tabletop is rounded. This can be done using a jigsaw or a circular saw with the appropriate compass attachment on it.
	Further, a milling cutter of the desired configuration is installed on the milling machine, which will make the edges of the tabletop smooth, if desired, even or rounded.
	The semicircular part of the panel is processed with a milling cutter, leaving the side that will dock with the second part of the countertop even. Then its edges are processed in the same way.
	In the next step, the two processed parts of the tabletop are laid on a flat table at a distance of 5 mm from each other. Marking is made for the installation of furniture hinges. They must be placed at a distance of 100-120 mm from the edge of the countertop. Furniture hinges may have different shape, so they should be laid in the marked place and circled with a simple pencil. Then, using a router, special curly grooves are arranged in plywood, the depth of which should be equal to the thickness of the furniture hinges. In the finished holes, the loops are fixed with self-tapping screws.
	After connecting the two parts of the table top with hinges, in the middle of the panels, on their lower side, markings are made to secure the parts that will form a closed channel for the movement of the moving table leg. The guides must be fixed at a distance of 30 mm from the junction of the two parts of the tabletop. For the manufacture of parts, plywood with a thickness of 18 mm is taken. Then, 10 elements are cut out of it and processed by a milling cutter: 530 × 30 mm in size - 2 pcs., 530 × 20 mm - 2 pcs., 120 × 30 mm - 2 pcs., 122 × 30 mm - 1 pc., 120 × 20 mm - 2 pcs., 122 × 20 mm - 1 pc. It is important to remember here that long slats should have 45˚ cuts on one edge, and short elements on both sides, so that when joined, they form a right angle. In addition, the upper long and short parts, fixed over the lower rails of the rails, are cut off at the ends, also at an angle of 45˚. These sections are necessary so that their corners do not interfere with the movement of the legs along the formed channel. Then, to the lined section of the rounded, and then to the rectangular part of the countertop, the parts are glued with carpentry glue. First, they are fixed with glue, and then the longest rails, having a size of 530 × 20 mm, are screwed with self-tapping screws, then the part 122 × 20 mm blocks the channel. On top of the long and short fixed rails, the second ones are glued, having the same length, but a greater width - they are also additionally screwed with self-tapping screws. Thus, an even channel is formed between the table top and the top rail, along which the leg will move. It is very important to calculate the location of the places for screwing in the screws so that the upper ones do not stumble upon those that fix the lower rails. In the same way, four parts are fixed on the rectangular part of the table top. All elements must be processed to smoothness and perfectly evenly fixed to each other, otherwise the leg will bump into obstacles and jam when moving.
	The leg is usually made on a lathe. If it is not there, then you can order it from the master or purchase it ready-made. In extreme cases, you can make it square by processing the timber of the desired height to smoothness. Then, on the upper end part of the leg, with the help of a dowel and glue, a guide square plate made of plywood, measuring 80 × 80 × 18 mm, is fixed exactly in the center.
	Further, after the glue has dried, the leg can be installed in the channel intended for it and tested for its free movement, without jamming. If necessary, minor adjustments and modifications can be made.
	The finished tabletop is painted or coated with a water-based varnish - if the goal is to preserve the textured plywood pattern. After that, the finished tabletop is put aside and proceed to the manufacture of cabinets.
	The elements of the cabinet do not have complex configurations, therefore, in order to make them, it is enough to accurately transfer the dimensions of the parts indicated in the table on an MDF panel or thick plywood and carefully cut them out with a jigsaw or saw. After the parts are made, their end parts must be machined to smoothness with a milling cutter, otherwise they will look sloppy.
	If you plan to paste over the visible end parts of the cabinet parts with a special laminated edge tape, then this process is carried out using a conventional iron. The tape on its inner side has a layer of glue, which heats up under the influence of heat and provides reliable fixation of the edge on the surface of the end parts of the MDF panels.
	The next step in the cabinet door panel is to make curly grooves into which furniture hinges will be installed and fixed. Holes are made in the same way as in the countertop using a router, but in this case, the cutter can also be installed in a screwdriver, since MDF has a lower density than plywood and is easier to process without chipping the material. The hinges should be located at a distance of 100 mm from the edges of the door - before drilling, it is necessary to carefully mark out. A similar procedure is carried out with the wall of the cabinet, on which the door will be fixed. Then the door walls are joined together to check the correct installation and to mark holes for self-tapping screws.
	In addition to the hinges, you can immediately screw the prepared handle to the door. To do this, stepping back from the edge of the panel 50 mm and finding a comfortable position in height, a point is marked through which it is drilled through hole to secure the handle.
	All manufactured parts of the cabinet are painted with paint of the selected color using a roller and brush. The paint will not only make the product aesthetically attractive, but also protect the material from damage. negative impact specific kitchen humid environment.
	Next, you can proceed to the assembly of the nightstand. Professionals carry out this process using special tools, but they can be replaced with improvised devices. For example, you can assemble on a flat table, and for ease of installation of the cabinet, it is additionally installed on even bars. Mutual fastening of parts can be carried out using wooden dowels, metal furniture corners or self-tapping screws - the latter option is the simplest, but also the most unreliable. In addition, the caps of the self-tapping screws after assembly will have to be masked with various compositions. The build process goes like this: - The bottom panel is placed on the stands. - One of the side panels and its location are marked with a pencil using a building corner. -Immediately, the location of fasteners is simultaneously outlined on the horizontal and vertical panels. - Exactly the same procedure is carried out with the second side and dividing middle wall. - Then, holes are drilled at the marked points of the bottom and the end sides of the side panels for installing dowels. - After that, before gluing the parts, places for installing shelves are determined on the side walls. Then, in the marked places, shelf-holder brackets are mounted, for which holes are also drilled. - Further, dowels lubricated with glue are installed in the holes drilled in the bottom, side walls are put on their upper, protruding part. - In the same way, non-removable jumper shelves are mounted, simultaneously with the side walls.
	Before continuing work, you need to make sure that the glue in the assembled structure has dried out well. To make the cabinet more rigid, it is laid on its side and compressed with clamps for drying.
	While the glue dries, you can start assembling the drawer. Since it will be completely assembled from MDF, the installation of the drawer can also be done using dowels. The sides are attached to the bottom of the box, and a line is drawn along them with a pencil, and then marks are made of the places where the dowels will be installed. Then, the sidewalls are removed, and at the marked places, holes are drilled in their end for mounting fasteners. The same is done on the bottom panel. Further, the dowels are smeared with glue and carefully inserted into the holes, connecting the sides to the bottom.
	Between themselves, the sidewalls are twisted with the help of self-tapping screws, the caps of which are recommended to be drowned in wood, and the holes are sealed with a mixture of epoxy glue and sawdust. Another option for fastening can be furniture corners, which are screwed to the sidewalls from the inside with self-tapping screws. Each side will require two corners.
	When assembling a box, it is necessary to control the evenness of its corners with a building corner and a change in diagonals, otherwise a skew may form.
	If you plan to install metal roller guides for easy movement of the box, then to begin with, on the sides of the boxes and on the inner walls of the cabinet, the place of their attachment is determined. To do this, using a pencil and a ruler, a line is drawn along which the guides will be fixed.
	Next, a front panel is installed to the front of the box. It is screwed from the inside of the box, through pre-marked and drilled holes. It is recommended, in addition to self-tapping screws, to fasten the panel to use glue: it is applied to the front panel, and then the front panel is pressed against it, and they are pulled together by four or five self-tapping screws. After the glue dries in the center facade panel a hole is drilled through which the handle is screwed.
	Finally, the long-awaited moment comes - the connection of the cabinet and countertop. It is recommended to first glue the stationary part of the tabletop to the surface of the cabinet, and then fix it with self-tapping screws, which are screwed in from the inside of the lower cabinets. But, first, the countertop must be properly positioned. Part of the channel located on the permanently installed tabletop panel should rest against the side of the cabinet - it will serve as a stopper for the movement of the legs towards the table. The tabletop should extend beyond the edges of the cabinet on the side of the drawer by 50 mm, open shelves by 30 mm, and from the side of the leg - by 120 mm.
	Having fixed the countertop, they proceed to the final installation and screwing the bedside table doors onto the self-tapping screws. Then a drawer is inserted, and shelves are installed on the shelf holders.
	When closed, the table is compact, so it does not take up much space and looks quite aesthetically pleasing. If desired, for its decoration, you can choose other colors that will better harmonize with the interior of a particular room.
	In the open state, the table also does not take up much space and fits perfectly into one of the corners of the room. Thanks to its "light" design, it does not weigh down the interior, and the shape of the table top makes it safe for children. Therefore, this version of the table can be considered ideal for small apartments with small kitchens and rooms.

If there is a need to save money, or simply there is a great desire to prove oneself in carpentry, then do not put off self-production. Moreover, the assembly will not only be an interesting and useful activity, but also very enjoyable, especially at the moment when the work is successfully completed.

For those who are confident in their abilities, another interesting option round table, which may well serve both at home and on the site.

Video: round table assembly example

And one more idea of a kitchen table, which, if incorrect, will also be within the power of a skilled owner to implement independently:

Video: lightweight collapsible kitchen table

Whatever the size of the kitchen, be it a small cell in a small family or a huge spacious kitchen in country house, in any case, a table is an obligatory piece of furniture in it. Despite the abundance modern materials and the possibility of choosing designer tables made of metal, glass, plastic and stone, wooden products continue to be invariably popular. A wooden kitchen table creates an atmosphere of comfort and harmony in the house, somehow you don’t even want to quarrel behind it, the mood becomes calm and balanced. You can buy such a table in any furniture store, the range of finished products is large and varied. But also a wooden table can be ordered in a carpentry workshop according to an individual sketch. Of course, both of these options will cost a pretty penny, so many people prefer to make a wooden kitchen table with their own hands. Thus, you can save up to 70% of the cost of a finished similar product in the store. True, to perform carpentry work, you will need special tools and carpenter skills, but this depends on the material chosen and the complexity of the table design.

Wooden dining table - optimal dimensions

The size of the table for the kitchen directly depends on the area of \u200b\u200bthe kitchen and the place where the table is planned to be installed. It is believed that a person feels comfortable if his personal zone is at least 70 cm, i.e. there is no one around him within a radius of 35 cm. Based on this, a square table 90x90 or 100x100 cm will be quite enough for a family of 4 people, if the room allows you to move the table away from the wall so that everyone sits on their own side. If the dimensions of the kitchen do not allow you to move the table, then you can install a rectangular table 120x75 or 120x80 cm. In this case, two people will sit at the long side of the table, and two people from the short sides.

In a large room spacious kitchen or in the dining room - you can safely put a large wooden dining table, the length of the tabletop of such a table is 160 cm. Usually the dimensions of large tables are 160x90 cm or 180x90 cm. There is enough space along the long side of the table to freely accommodate two people, and two people behind the ends will feel just kings. And that's on normal days. If an event is planned with many guests, then 10-15 people can safely fit at such a table.

But how to accommodate guests to residents of apartments with small kitchens? In such cases, a sliding dining table and a transforming table come to the rescue. Sliding tables are equipped with additional inserts for the tabletop, the width of which is usually 40 - 50 cm. There can be from one to three such inserts, they are all located in the middle of the table or hidden under the tabletop cover in a special niche if the table is in the assembled state. unfolded length extendable table can reach 230 - 280 cm. This is enough to invite guests to a wedding. When folded, the length of such a table is from 120 to 180 cm.

The height of the dining table is usually 70 cm, but a lot depends on the height and build of the residents, sometimes kitchen tables are made 60 - 65 or 75 - 80 cm high.

When choosing the dimensions for the dining table, be guided by the space allotted for it. After all family members sit down for him, there should be enough free space around for the hostess to move, so that she does not create inconvenience to those sitting and vice versa.

Wood for the kitchen table

The choice of material for the kitchen table is a responsible task, from right choice depends not only on the durability of the table top and its resistance to mechanical deformations, but also on the final cost of the table as a whole. Solid wood kitchen tables are considered the most durable, environmentally friendly, aesthetic and are the most expensive. To make a solid wood table yourself, you will need the skills of a joiner and carpenter, as well as a woodworking tool and a workshop for work.

The density of wood for the kitchen table has great importance. There may be marks and scratches on the surface of softwood, although it all depends on the accuracy of the owners. And hard rocks can be difficult to handle for a beginner. Masters distinguish three categories of wood by density: soft, hard and the hardest.

Softwoods include: pine, cedar, fir, spruce, poplar, aspen, linden, alder, juniper, willow and chestnut.

Hardwoods include: oak, beech, elm, ash, larch, birch, apple and rowan.

To the hardest: white locust, yew, iron birch, dogwood.

Any wood is suitable for a dining kitchen table, even pine, which is considered the softest, but its surface must be varnished in several layers. The walnut table will be strong and heavy, and its surface is exceptionally durable, because even in the process of making openwork carving on the walnut there are no chips.

Oak wood for the kitchen table is ideal. In addition to being strong, hard and durable, it is also easy to work and varnish, does not warp, split or warp, and is resistant to decay, which is extremely important for a wet kitchen.

Larch wood is considered healing, but given that the surface of the table must be covered with protective agents, it will not have the opportunity to release therapeutic phytoncides into the atmosphere. Linden wood is suitable for the manufacture of turned elements, plastic and durable, but it is affected by pests, and therefore also requires staining.

The most common types of wood that are used to make kitchen dining tables are pine, oak, walnut and wenge. Remember that you need to buy only well-dried material, with a moisture content of not more than 10%, otherwise the tree may warp, and this is fatal for the table.

In addition to solid wood, kitchen tables are made of laminated chipboard (laminated chipboard) with a thickness of 18 to 22 mm, as well as plywood and MDF. The ends of these materials are closed with a special PVC or melamine tape. These materials can hardly be called environmentally friendly and, of course, they are inferior in strength and durability to solid wood, but the ease of processing and low price tempt many. The laminated chipboard surface does not need to be additionally coated with anything, it already has a finished look. And plywood is used only for strapping or embedded parts, so it is not visible.

To make a table from solid wood or prefer a chipboard that is easy to process depends on the preferences of the owner and his carpentry and financial capabilities. After all, a kitchen table made of chipboard will cost much less.

Types and configuration of kitchen wooden tables

After you have decided on the size of the table and the material of manufacture, you can proceed to the choice of shape and configuration. Diversity design solutions of tables is able to satisfy any requests and choose a table model that best fits into the interior of the house and complements its sophistication.

Legs for kitchen wooden table

The number of legs for a dining kitchen table, their shape and size directly depend on the shape and size of the table, as well as on the material of manufacture. For example, it will not work to make a table completely from chipboard on 4 legs, which are attached to the corners of the tabletop, since the chipboard material has insufficient thickness and strength. But if in such a model the tabletop is made of chipboard, and the legs are made of wooden beams, then you get a completely strong and durable product.

The legs for the kitchen dining table can be made independently according to the sketch, or you can buy ready-made ones in the furniture fittings store. Self-manufacturing legs is a time-consuming task, the complexity of which depends on the configuration of the legs. That is why many people prefer to buy ready-made products. In the furniture fittings store you can buy metal legs for the kitchen table, which are hollow pipes with a diameter of 70 - 90 mm, but you can also pick up wooden carved legs that look like balusters for a wooden staircase.

The dining kitchen table can be supported by one or more legs. It depends on the weight of the tabletop, the shape and configuration of the table. How different dining tables look with different amount, the shape and size of the legs, you can see the photos showing the wooden dining tables below.

To set the dining table on one massive leg, it is necessary to perform a high-quality cross-shaped strapping.

Also the table can be about two massive legs separated by a certain distance. Usually such tables have a rectangular or oval shape. Tables on two legs are convenient because the people sitting at it do not beat their feet on the legs of the table. At the bottom, these two legs expand to increase the footprint, and are also connected at the bottom by a jumper board or reinforcement board.

Dining tables with four legs- the most common category and the easiest to perform, since complex calculations for strength and stability are not needed. It is enough to choose the legs of the correct size and set them at the correct distance from the edges of the table. The shape of the tabletop of such tables can be round, oval, square and rectangular.

The shape of the legs for the kitchen table can be very diverse. Remember that the aesthetic appeal of the legs is even more important than the beauty of the tabletop, as it will be hidden by the tablecloth, while the table legs will be visible to all guests.

Countertops for the kitchen table

The tabletop of the kitchen table can be made of solid wood (furniture board, which is a board glued together), as well as chipboard or glass. Naturally, massive tables look more refined and resemble a work of art, while chipboard tables are just an ordinary, unremarkable dining table. The end of the chipboard must be edged, so the cut must be perfect. Cutting chipboard at home, and even so that the cut is even, is quite difficult. Especially if the cut is semicircular. Therefore, sawing chipboard on the machine is better to order. Trimming laminated chipboard is best with PVC tape 2 mm thick or more or melamine tape. The first option is preferable, since the edges are smooth, even and rounded. If you paste over the end of the laminated chipboard with melamine tape, then the edges will be sharp, they may cause puffs on clothes, cuts on the skin, and the melamine tape is short-lived and does not withstand frequent water procedures.

Important! The thickness of the countertop should be more than 25 mm, preferably 28 - 35 mm. If a laminated chipboard with a thickness of only 18 mm is used, then from below it is imperative to make reinforcement in the form of a false plywood tabletop.

The shapes of the tops of wooden tables are not as diverse as the shapes of the legs.

Round tables for the kitchen - an option for an amateur. The main problem is that, oddly enough, such a table requires more space. You can’t put him in a corner, and even if you move him up to the wall, it’s all the same that people need free space around him to sit down. The round wooden dining table will look great in the dining room or large kitchen, living room, where it will stand in the middle of the room. In a small kitchen, a round table is not appropriate. Unless, if only one or two people live in the house, and the table is small - no more than 90 cm in diameter. Round tables allow you to experiment with support. For example, use only one leg or three legs, but for greater stability, four legs are still used, installed at a distance of 10 - 15 cm from the edge of the tabletop. You cannot use two support legs in tables with a round top - this design is unstable.

Oval kitchen tables come in a variety of sizes, from small tables for oversized kitchens to huge tables that occupy the center of a dining area.

A small oval wooden kitchen table is designed for compact kitchens, it can be installed in a soft corner set, as shown in the photo. But the most common are still large tables and medium-sized tables, as they fit in average domestic apartments and at the same time many guests can be accommodated behind them. If there is nowhere to put a large table - the area of \u200b\u200bthe living room and kitchen does not allow, then an oval sliding wooden dining table comes to the rescue.

Such a table usually has a tabletop divided in half, the halves of which can be moved, and additional inserts can be installed in the middle part of such a table. By the way, the shape of such a table in the folded state can be round, and the table acquires an oval shape only in the unfolded position.

Sliding wooden kitchen tables

It is worth highlighting in a separate category sliding tables for a large number guests. They can have different shapes: round, oval and rectangular. The most common are still rectangular and oval models. It is easier to make a rectangular sliding wooden dining table on your own than an oval one, since there is no need to round the corners with a carpentry tool.

Sliding mechanisms for such tables can also be different. Old Soviet tables were not equipped with roller guides or full roll-out guides, and the table had to be pushed apart with effort, as wood rubbed against wood. Especially if the table was folded for a long time, sometimes it was extremely difficult to move the wooden surfaces that had stuck to each other. Modern sliding tables have a special roll-out mechanism, which greatly facilitates work, and also prevents damage to wooden parts and surfaces. Metal guides for the sliding table can be purchased at the hardware store.

Sliding wooden kitchen tables: photo examples.

Additional wooden inserts-sections, which are installed in the middle of the table, can be stored under the tabletop when the table is folded. The easiest way is to make special fasteners for them into which they will be inserted.

In modern sliding dining tables, the insert consists of two halves connected by hinges, folded in half and hidden under the table top using a special mechanism. To do this, under the main tabletop, an additional false tabletop with a hole in the middle must be required.

Tables on wooden legs, but with a glass top, are suitable for rooms in a style close to high-tech or minimalism. Sometimes a glass top is installed on top of wooden frame or a wooden tabletop with holes. In any case, the product is futuristic. The table top is usually made of tempered glass, it is not only impact resistant, but also much stronger than wood, and the surface is quite difficult to scratch. The legs are attached to the glass top with special fasteners. Such a table can be easily made on your own if you order glass cutting in an organization specializing in this.

Transforming tables are a separate category of tables, which, when folded, are a small compact bedside table. If you put it near the wall, then it will take no more than 50 - 60 cm. When unfolded, such a table can accommodate from 10 to 15 people. Hinged tabletop covers are attached with hinges. The most common form of transformer tables is rectangular, but round tables are also found.

DIY wooden dining table

To make a wooden table with your own hands, you need to have a workshop, since there will be a lot of dust, and it makes no sense to litter in an apartment or house. First you need to draw a sketch of the future table with the exact dimensions. Then sawing of wooden elements can be ordered at the sawmill, if it is not possible to do it yourself. Consider the manufacture of the simplest wooden dining table.

We will need the following materials and tools:

Hacksaw;
Electric jigsaw;
Drill;
Milling machine;
Plane;
Paint brush;
bolts;
Sandpaper and grinder;
Wooden boards 22 mm thick;
Furniture shield.

The first step is to cut out all the elements according to the sketch. The legs in our case will have a simple straight shape with cutouts that are easy to make with a jigsaw, and then clean with a grinder and chamfer.

The legs of the kitchen table according to the drawing consist of two horizontal elements (supports) with which the table rests on the floor surface, and two vertical elements (rack legs). They are connected to each other by a simple bolted connection (bolts 8 mm). The bolts are fastened through and on the reverse side are locked with a nut. The assembly starts from the bottom, first one vertical leg-rack is attached to the supports, then the same is done with the second leg. Then, a longitudinal connection is inserted into a special groove between the vertical legs-racks - a jumper board. It is fixed by the second vertical elements of the legs-supports.

The next step is the installation of the countertop. We put the finished furniture board and in the place where it is planned to mount the vertical elements of the legs, we install horizontal transverse stiffeners. These elements have a length equal to the width of the countertop. Then a flanging of wooden bars is installed on top. The technology for attaching the flanging to the tabletop and horizontal transverse stiffeners is easier to understand by watching the video at the end of the article. The strapping / flanging beam is fastened through the straps of the stiffeners with two self-tapping screws.

First, the bars are attached to the long sides of the tabletop, then perpendicular bars are attached to them with screws, located along the narrow side of the table. As a result, a free space remains between the tabletop and the flanging bars, which does not look very aesthetically pleasing. To close it, a decorative wooden plank is used. To fix it to the bars, dowels are used. Holes for dowels are made in the bars and planks. Then wooden cylinders, which are called dowels, pins or dowels, are inserted into the holes of the strapping bars, having previously lubricated the hole with glue. Then a decorative strip is put on the protruding dowels. The tabletop is ready.

It remains only to screw the legs of the table to the table top. For this, the same bolts are used as for attaching the vertical leg-racks to the horizontal supports. Holes for them are best done in advance.

The design of this table turned out to be collapsible, after the feast it can be disassembled by screws and hidden in the pantry or behind the closet. More clearly, the sequence and technology for making a wooden table with your own hands can be viewed in the video instruction below.